ADDITIONS AND ALTERATION TO DMDE AUDITORIUM AND RELOCATION OF GYM WITH TOUGHENED GLASS STRUCTURE AT DMDE OFFICERS TRANSIT MESS SECUNDERABAD

Amount

Dismantling of wooden boarding of any description including frame work fixed with screws in floors complete all as directed.

M&L for cement concrete 40 mm thick type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floors finished fair and even complete all as directed.

M&L double charged vitrified tiles of any shade as approved by GE, 8 to 10 mm thick (square/ rectangular) polished area of each tiles nexc. 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per srl item No. 3 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

Taking down wooden chowkats with shutters or steel windows (without taking off shutter from the frames) exc 1.5 Sqm but nexc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc1.0 Sqm but nexc 2.00 sqm each complete all as specified and directed.

S&F 40 mm thick designer flush door shutter, solid core construction with block board core and plywood face panels, and covered with decorative face veneering on both sides all as specified and directed.

S&F for powder coated [thickness of powder coating not less than 50 micron], aluminium window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, aluminium fittings such as 100mm size handles 2 Nos,100mm butt hinges 2 nos, 150 mm long peg stay one no, in each shutters complete all as specified

S&F Powder coated aluminum grill made of 6mm dia aluminium bars, size of mesh 100mm by 100mm fixed together with aluminium U channel thick all round the grill complete fixed in position complete all as specified.

S&F Butt hinges, 100 mm in size, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 fixed in position complete all as directed.

S&F cast brass door stopper of size 150 mm and fixed with brass screws to door shutters complete in all respect complete all as specified.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified.

S&F Brass handles, cast type, polished bright 300 mm long and fixed in position complete all as specified and directed.

S&F Brass handles, cast type, polished bright 100 mm long and fixed in position complete all as specified and directed.

S&F 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed and fixed complete in all respect and all as directed.

M&L 18mm thick Plywood 9 layer grade BWR type BB fixed in repairs with screw to timber frame work all as specified.

M&L 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified.

M&L second class hard wood in scantlings clean sawn fixed complete all as specified.

S&f 1st class soft wood (teak wood) boarding 40 mm thick, planed one side, with butt joints and fixed in floors with headless nails complete all as specified.

M&L prepartion of wooden surfaces and applying french polishing on surfaces of any description, width or girth including a coat of wood filler on new works with two or more coats complete all as specified

M&L for prepration of new wooden surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F aluminium extruded sectionbody, door closer hydraulically aluminium extruded section regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to chowkat complete all as specified.

Supply and fixing Armstrong mineral Fibre Acoustical suspended ceiling systems with Dune (Micro look) edge tiles with Armstrong silhcousette exposed Grid system. The tile should be humidity resistance (RH) of 99%, NRC 0.55, light reflectance > 85%. Thermal conductifity K=0.052 - 0.057 w/m K, colour white of size 600 x 600 x 16 mm thick Bio block coat on the face of the tile, suitable for green building applicatin, with recycled content 63% Silhouette profile suspension system of grid made from hot dipped GI Steel section notary stiched double webbed powder coated white consisting of main T-runner 42mm x 14mm and 0.30mm thick and cross 'T' of size 33mm x 14mm with 6mm reveal profile (white/black). The grid system to be rested on the periphery wall / partitions on a W-Profile wall section made of pre-coated galvanized steel of dimension of 3.00mm long x(15mm +10mm) x 22.5mm and laying false ceiling for services like diffuser grill including cutting, making opening for services like diffuser grills, light fittings and fixtures, smoke detectors etc wherever required Main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanised level adjustment clips spaced as required at all height complete all as per specification, drawings and as per manufacturer's direction.

M&L 22 to 25 mm thick decorative sound absorbing fabric wrapped panel board of any size for insulation and accoustic purposes fixed with screw to timber frame work as per manufacturer's instructions on grid complete all as specified

M&L second class hard wood plain fillet square or rectangular in section, cleaned sawn secured with screw sectional area exc 13 and not exc 25 Sqcm in repair complete all as specified

S&F Stainless steel side sliding rollers complete with clip and guide rail, using stainless steel of grade 304, suitable for rolling of cupboard shelves, fixed with steel screws, complete all as specified and directed. MAKE:- Godrej / Heittech or techno-commercially equivalent make as approved by GE.

S&F Godrej jupiter mid back tilted type auditorium chair floor mounted fixed with nuts and washers complete all as specified.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris outside MOD land complete all as specified.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F Multicolor fiber roller blinds water resistant, UV protection, transparent, black out suitable for window etc fixed complete all as directed . Make: Vista/Levador/Amar

S&F 4 ply vinyl fibre glass material eggshell color roller blinds water resistant,UV protection,transparent, with lift control continuous cord for window etc fixed complete all as directed . Make: Vista/Levador/Amar

M&L complete removal of existing treatment of surfaces of wall and preparing for fixing and applying one coat of primer complete all as directed.

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m deep & getting out complete all as specified and as directed.

Material and labour for PCC 1:4:8 Type D2 using (40mm graded stone aggregate) in foundations, filling and mass concrete etc complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in footings, foundation beams, plinth beams and mass concrete complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in columns, pillars etc complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in beams, bands and lintels over 1.5m span complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour use & waste of form work to sides and soffits of floor and roof beams, lintels etc, for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour use & waste of form work to soffits of suspended slabs such as roof slab,floor slab for rough finished surfaces of concrete complete all as specified and as directed.

Material and labour rough finished surfaces, form work to edges of concrete flats, treads, breaks infloors, window cills, concrete railings, openings in concrete walls floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work complete all as specified and as directed.

Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Supply and fixing Mild steel TMT bars 5 dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming to TMT bars complete all as specified and as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and as directed.

(a) M&L cleaning the surface, remove dust dirt, loose particles and unsound substrate and providing 15mm thick cement screed (1:4) mixed with Dr Fixit water proof compound as per manufacturer's direction. (b) Applying primer coat with solvent based bitumen primer @ 0.30 ltr/ Sqm (c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrance weighing not less than 3.00 Kg/Sqm using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap (d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel (e) Seal edges well into grooves & protect with CM 1:2

M&L Hydraulically pressed plain cement concrete tile of size 250x250x19/20mm laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as directed.

S&F PVC (SWR) pipes single socketed in any length, fixed to walls with clamps 150 mm bore of pipe complete all as specified. Make: Prince/Sudhakar

S&F PVC (SWR) bends any radius 150 mm bore of complete all as specified. Make: Prince/Sudhakar

Material and labour 15mm thick rendering on fair faces of brick work or concrete surfaces finished even & smooth surface (without using extra cement) in CM (1:6) complete all as specified and as directed.

Material and labour 5mm thick rendering on concrete surfaces of ceiling finished even & smooth surface (without using extra cement) in CM (1:3) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat oil bound distemper over a coat of primer and 3mm thick putty complete all as directed

M&L for preparation of new plastered surfaces of walls and applying two coat of ACE Exterior emulsion paint over a coat of primer complete all specified and as directed

M&L for preparation of new plastered surfaces of ceiling and applying two coat of ACE Exterior emulsion paint over a coat of primer complete all specified and as directed

Supply & fixing of UPVC windows or UPVC framed portion 2 track sliding window with two glazed sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick toughened glass complete all as directed . Make: Rajshree/NCL

Supply & fixing UPVC fixed glazing of profile width from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile modulus - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile and including 5 mm thick toughened glass complete all as directed. Make: Rajshree/NCL

Demoltion of cement concrete as in chajjas,fins, roofs, and similar suspended work and removing demolished materials outside MOD Land complete all as specified.

S&F 5 mm thick looking mirror fixed with stainless steel fasteners complete all as specified and directed. Make : ATUL, Modi Float

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with PVC flat of size 40x6 mm thick fixed with tinned tacks complete all as specified and directed.

Supply and fix ARMSTRONG false ceiling of size 600 x 600 mm fixed on GI grid in false ceiling including GI frames duly powder coated for false ceiling with approved sections suspended with GI suspenders at 1200 mm centre to centre complete all as per manufacturers instruction with necessary holes arrangement for fixing the light fittings complete all as specified and as directed.

M&L for cement concrete 100 mm thick type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floors complete all as specified.

M&L for cement concrete 25mm thick type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub base of floors complete all as specified.

M&L for 15 mm thick rubberised water resistant flooring sheet or tiles in pattern and design as decided by accepting officer fixed on floors with approved adhesive as per manufacturer's instructions complete all as specified. Make: Amtico or equivalent

S&F 12mm thick Toughened frosted/Tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard/ saint Gobain

S&F powder coated glazed aluminium door using 101.6mm x44.45mm x 2.00mm section chowkhat and 85mmx44.45mm x 2 mm section vertical style and 150.00 mm x44.45mm x2mm bottom and lock rail and 101.6mm x44.45mm x2mm top rails mounted on floor spring and glazed with 5 mm thick plain sheet glass or 12 mm thick PLPB fixed with rubber beading/gasket and powder coated aluminiun beading and one mortice lock, two powder coated alum door handle D type 250 mm long, one powder coated alum tower bolt of 200 mm length and one 250 mm long sliding bolt for each leaf complete all as directed.

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as directed. Make : Godrej/Ozone

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as specified.

Taking down carefully copper/alluminium point wiring light, fan, sockets or power includind all fittings and accessories complete and making good disturbed surface of walls and floors etc.

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including modular metal flush box and modular white cover plate with frame as per requirement, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specified and directed for the following:-

One light / fan/Exhaust fan by one, one way switch 5/6 Amps

One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including modular metal flush box and modular white cover plate with frame as per requirement including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed .

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular switch 1 way 16 A , 1 module complete all as specified and directed.

S&F ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/16 Amps -2/3 pin combined 2 module complete all as specified and directed.

S&F fan regulator step type 120 watt 02 module complete all as specified and directed.

S&F MCCB ,DB wall mounted vertical type with provision of MCCB 4 pole 100 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing 4 way double door and including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed. Make:- Standard or eqavalant to LEGRAND / SIEMENS

S&F MCCB 3 pole 415 V 100 A Hz fixed type with rupturing capacity 16 KA all as specified. Make:- Havells/Standard/L&T

S&F MCB SPN 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. (CAT Part No.DSMSCDPFO40 Make:- Make:- Havells/Standard/L&T

M&L for sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed.

M&L for MCB SP 06 to 32 Amps 240 volt,C' curve,10KA complete all as directed. Make:- Havells/Standard/L&T

S & F 2ft x 2ft recess mounted full panel LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser , in built electronic driver duly wired up to terminal block, power consumption< 36W, luminaire lumen > 3500lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp -5700K, Ingress protection IP 20, , driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 500C, power factor >0.95, THD < 10% , surge protection in CM -3 KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification complete all as specified and directed. Make:- Wipro Model No. CRCO10R038HP57GL1 or equivalent

S&F ceiling fan 5 star rated complete 1200mm sweep, energy efficient suitable to function on 230Volts, single phase AC supply, complete including fan regulator 450w and connecting with and including provision of PVC sheathed flexible copper conductor from ceiling complete all as directed. Make : BAJAJ/HAVELLS/ CG

S& F sheet metal enclosure powder coated double door in flush fixed position suitable for MCB DB 8 way SPN 230V AC 50 Hz all as directed.

Supply, Installation, testing and commissioning of split type Air Conditioner 1.5 TR capacity inverter type 5star rated, single phase, 230 volts complete with all accessories as provided by the manufacturer such as indoor, outdoor units refrigerant copper tubing insulation packing and water outlet pipe to be brought out side and electrical copper cable PVC insulated multistranded sheathed 3 core of adequate size and length, and metal stand / PCC base as per site condition shall be provided and any additional refrigerant pipe line and cable shall be provided for functioning of unit complete all as directed. Make : Daikin Model no JTKJ50TV or Hitachi Model no RSOG518HCEA

Supply, connect and testing voltage stabiliser 4 KVA single phase 230 volts 50 cycles wall mounting type suitable for 1.5 TR split AC with low/high voltage cut off and intelligent time delay 3 minutes + - 20% seconds of working range 170 volts to 270 volts complete all as directed. Make :- V-Guard / Servo / Bluebird

S & F copper tube for gas / liquid with foam insulation for split type AC on wall complete all as directed. Note:Quoted rate is deemed to include cleats and battens required and all arrangements for fixing the tubes upto third floor.

S&F MCCB 4 pole 125 amp 16 KA with encloser and fixing with nut and screws complete all as directed. Make: HAVELL’S / UNIVERSAL

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 25 sq.mm 4 Core complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

S & F PVC water drain out pipe 20mm dia with saddles for fixing on wall upto third floor complete all as specified and directed.

Material and Labour for sub main wiring with 2 runs of 6 Sqmm single core ISI marked PVC insulated unsheathed cable 1100 Volts grade multistranded copper conductor cable drawn through in and including surface/concealed rigid PVC conduit medium grade of suitable size and conduit accessories such as bends, tees, junction boxes type on walls, roof, floors etc.. including providing 1 run of 6 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to earth dolly wire all as specified and directed. Note :- 2 Runs of 6 sqmm cable 1 run of 6 sqmm cable and 1 run of PVC conduit shall measured as one unit for the purpose of payment.

S&F lamp holder PVC / polycorbonate type with cord grip cap suitable for pendant fitting complete all as specified and directed..

S &F Exhaust fan 230V 50 Hz 300mm sweep with louvers all as specified and directed.Make : BAJAJ/HAVELLS/ CG

S& F MCB DB TPN 8 way 240V with 200 amps rated bus bar double door all as specified and directed.

S&F MCB DB SPN 4 way 240V with 200 amps rated bus bar double door complete all as directed.

S& F MCB SPN 63A 240V all as specified and directed.

Supply & Fixing LED fitting.indoor Batten light , 1 x 22 W , 230V (4') Energy efficient, Box type aluminium housing ,with Drive , connecter block, etc. complete with all accessories internally pre-wired and including connecting up with twin core hvisted flexible copper conductor cable with suitable size. Havels cat Part No: EDURALINEARNEOBS22WLED865SPCWH or Equivalent make of Philips/Bajaj/CG

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded HRFR copper conductor with one run of 2.5 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required. Note : Two runs of 4 sqmm & one run of 2.5 sqmm cable and one run of conduit shall be measured and paid as one length.

Shifting of Split type AC, any type/capacity upto third floor, from one position to a new position by removing all electrical connection and copper tube connection with proper way and making good the old existing position by cement plaster and painting with existing colour and fixing of AC at new position including gas charging , extention of copper tube, drain pipe and cord cable and making all electrical connection and all arrangements for fixing complete all as directed.

M.R.ENTERPRISES

Ravi Enterprises

SHAH ENTERPRISES

M/S PAVANI ENTERPRISES