SPECIAL REPAIR TO BLDG FLOORING AND PLINTH PROTECTION OF BLDG NO. P-11 (SINGLE JCO LIVING) IN ZONE -9B AT TALBEHAT MIL STATION

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles 600 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.

M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed.

S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc .complete all as specified and directed.

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L 15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper over a coats of 1mm thick wall care putty. complete all as specified and directed.

M&L for preparing of surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying two coat of oil bound distemper in any colour over a coat of wall care putty complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 but n.exc 4sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and as directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with ecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) ®

S&F butt hinges Stainless steel size 100 mm size complete all as specified and directed.

Supply and fix 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed

M&L for preparing of old painted wood and wood based surface & applying one coats of synthetic enamel paint (1st grade) over 10Cm width or girth complete all as spd & directed.

M&L for preparing of old painted steel and Iron surface & applying one coats of synthetic enamel paint (1st grade) over 10Cm width or girth, not otherwise described. complete all as spd & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S Kharya Associates (BID ID -3327943)

M/S SHIVA TRADERS (BID ID -3328051)

M/S A.R BUILDERS (BID ID -3327901)

HARNAM SINGH ANIL SINGH (BID ID -3326305)

M/s Indu Enterprises (BID ID -3327979)

m/s gupta trading (BID ID -3326930)

ROHIT ENTERPRISES (BID ID -3327970)

PRATAP CONSTRUCTION (BID ID -3326518)

VEER SINGH CONSTRUCTION (BID ID -3327154)