CERTAIN REPAIR WORKS TO FLOORING, PLINTH PROTECTION, PLASTERING, CHAJJA, PLUMBING WORKS, ETC IN OTM AND MD ACCN IN ZONE A AREA UNDER AGE(I) NAVY CHENNAI

Amount

Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description n exc 1 sqm but each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

S&F in repair Pre- painted 10mm thick multiwall polycarbonate plain sheeting in required colour fixed with caoch screw/machine rivets including all washers/nut bolts etc including aluminium angle 25x25x2mm thick around frames of free or front edges and both sheets jointing with aluminium strip, top bottom section with rubber gasket of width 50mm for jointing/fixing of sheet as required complete all as specified and as directed. Make: Polyplast India/ Duro tuff/ Sglite

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. and including taking down of the existing from concrete etc complete all as speciied and directed.

M&L for applying coats of weather proofing dampshield 2K or home shield damp stop on affected damp using mechanical tool/auto roller complete all as directed as specified and directed.

M&L for preparation of old un decorated surfaces and applying one or more coat of birla wall care putty complete all as specified and directed.

M&L for preparation of old un decorated surfaces and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparation of applying one of cement base paint on old plastered or un plastered surfaces complete all as specified and directed.

Attending minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard, drawers and the like door springs, rooling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functning to seating over with each other with tightening of screws/nails, door springs etc, including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work complete all as specified and directed.

S&F in repair for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections , Aluminum powder coated sliding three track windows of frame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified and directed. Note : (a) Thickness of powder coating not less than 50 micron. (b) Weight of Aluminum sections to be measured only and misc items i.e rubber beading rollers handles, hinges and tower bolts and door stoppers, window locks etc deemed to including the quoted rates. (c) Wire mesh, Glass, door closer and Mortise lock will be measured and paid separately.

S&F aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.

S&F for plain sheet glass,3mm thick, ordinary quality and glazing but fixed in repair to wooden windows/ ventilators including teak wood beading for wooden doors etc etc complete all as specified and directed. etc complete all as specified and directed.

S&F for plain sheet glass,4mm thick, ordinary quality and glazing but fixed in repair to aluminium fixed / sliding windows/ventilators, but not exc 0.50 Sqm etc complete all as specified and directed.

S&F for plain sheet glass,4.80mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each complete all as specified and as directed but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, Aluminum Partetions and Aluminium doors etc complete all as specified and directed.

S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repair for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

S&F in repair 100 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

S&F in repair aluminium handles cast type anodised for 100 mm complete all as specified and directed

S&F in repair aluminium handles cast type anodised for 150 mm complete all as specified and directed

S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

S&F in repair for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

Attending minor complaints of plumbing and sanitary fittings including water leakage from taps, WC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bolttle traps etc to make it functional and stop leaking of any type of plumbing and sanitry items as in day to day maintainence work complete all as directed.

S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.

S&F in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed.

S&F in repair for Wash basins flat back type, vitreous china of 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed.

S&F in repair for Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed .

S&F in repair for Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed

S&F for in repair pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.

S&F in repair for 125 mm dia Fancy type brass CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .

S&F in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.

S&F in repair for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

S&F cabinet mirror size (350x450)mm of with approved colour complete including necessary fixing arrangements and taking down the old mirror and taken as credit complete all as specified and as directed.

S&F for 32 mm PVC waste hose Low density polyethylene (LDPE) pipes 0.9 mtr long of pressure rating 6kgf/sq. Cm for WHB / SS Sinks with coupling etc complete all as specified. Make- Prayag

S&Fplastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed

S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repairs for 32/40 mm dia chromimun plated waste coupling fixed in WHB/Sink complete all as specified and directed

Demolition of cement of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Cement concrete in foundations, filling and mass concrete for post and struts etc complete all as specified and directed

M&L for preparation/ buffing of old stainless steel surface of posts and purlins and raters etc with grinding, buffing, polishing etc complete all as specified and as directed.

Removal of demolished materials/debris to a distance exc 1.50 KM but n exc 5.00 KM complete all as specified and directed.

Sri Sankar Enterprises

kvs constructions