Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC HOUSE NO 2 SATGAON MAIN ROAD NEAR BAILEY WATER FACTORY P O UDAYAN VIHAR DIST KAMRUP METRO GUWAHATI ASSAM 781171 | GUWAHATI | KAMRUP METRO | ASSAM | 781171 | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.4 L+₹1.5 L (3.31%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹48.0 L+₹2.1 L (4.67%)Rejected-Finance NEAR PLAY GROUND BIRDLINE CALICUT POST PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹48.9 L+₹3.1 L (6.67%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹50.8 L+₹5.0 L (10.8%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
GE Minniebay Junglighat Post Minniebay Port Blair 744 103
COMPREHENSIVE MAINTENANCE AND CERTAIN B/R REPAIRS AT INS UTKROSH UNDER AGE B/R NO II AT GE MINNIEBAY, PORT BLAIR
2023_MES_573761_2
8215/E8
Open Tender
Civil Works
Item Rate
270 days
Minniebay Port Blair
As per tender documents
11 documents required · 11 mandatory
₹500
GE Minniebay
₹88,000
Yes
4 Mar 2023
11 Feb 2023
27 Feb 2023
12 Feb 2023
25 Feb 2023
19 Feb 2023
Amount
Taking up or down old/chocked water tubings 15mm bore with fittings from trenches /walls and stacking at site for crediting to contractor all as directed by Engineer-in-Charge.
Taking up or down old/chocked water tubings 20 mm bore with fittings from trenches /walls and stacking at site for credit to contractor all as directed by Engineer-in-Charge.
Taking up or down old/chocked water tubings 25mm or 32 mm bore with fittings from trenches /walls and stacking at site for credit to contractor all as directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary accessories complete all as specified and directed by Engineer-in-Charge.
All as per item no 4 above but 20 mm bore tube complete all as specified and directed by Engineer-in-Charge.
All as per item no 4 above but 25 mm bore tube complete all as specified and directed by Engineer-in-Charge.
All as per item no 4 above but 32 mm bore tube complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing and connections of 15mm dia in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing and connections of 20mm dia in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed by Engineer-in-Charge.
Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealING water tubing etc., and making good, cutting width not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.
M&L for disconnecting GI water tubings near water tanks, taking out old rusted GI tube short lengths (nipples) from PVC water storage tank as out lets/inlets by chiseling and replacing with new nipples all as directed by Engineer-in-charge. ( Note:Supply only of new nipple/long screw shall be included in this quoted item )
S&Fin Repairs 32mm waste pipe fittings, brass, chromium plated for glazed ware sinks, basins & urinals etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 40mm waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and directed by Engineer-in-Charge.
S & F in repairs bib taps cast copper alloy heavy duty, 15 mm dia, chromium plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed by Engr-in-Charge
Fixing only in repairs bib cock including cleaning, removing of air block etc of any type and size complete all as specified and as directed by Engr-in-Charge
S&F in repairs Pillar taps, cast copper alloy chromium plated, fancy type, screwed down, high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut of 15mm bore complete all as specified and as directed by Engr-in-Charge
S & F in repairs Vitreous china wash hand basin, white, flat back of size 550 mm X 400 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed.
S & F in repairs Ball Brass Valve, 25 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
All as per item 18 above, but 20mm dia bore.
S&F in repairs angular cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.
S&F in repairs angular cock(fancy type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.
S&F in repairs concealed type stop valves cost copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engr-in-Charge.
Fixing only in repairs stop cock any type and size after cleaning and removing of blockage complete all as specified and as directed by Engr-in-Charge.
S&F in repairs vitreous China squatting pan Orissa pattern, size 580x440mm, white with integral foot rest (excluding flusing cistern and flsh pipe) including provision of lime concrete bedding and making good to the floor, complete all as specified and as directed.
Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engr-in-Charge.
S&F in repairs gun metal Gate valves with iron wheel head screwed both ends for iron pipe of dia 20mm complete all as specified and as directed by Engr-in-Charge.
S&F in repairs gun metal Gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and as directed by Engr-in-Charge.
S&F in repair PVC flexible connection, of 15mm and 600 mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank etc,complete all as specified and as directed by Engr-in-Charge.
S&F in repairs towel Holder Twin Type CP Brass complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Towel Rack 600 mm Long with Lower Hangers Superior finished CP Brass complete all as specified and as directed by Engr-in-Charge.
S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC waste pipe of 32/40mm dia complete all as specified and as directed by Engr-in-Charge.
Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries off the premises complete all as specified and as directed by Engr-in-Charge.
M&L for non-skid ceramic coloured tiles 7 to 8mm thick(square/rectangular)area of each tile exceding 0.06 Sqm but not exceeding 0.11sqm ,in floors etcset and jointed in cement slurry and pointed in coloured cement to match over a screed bed of 15mm thick in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L non skid cermic coloured tiles (400 x 400)mm and 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over a screed bed of 15mm thick in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
All as per item No 35 above but Vertical surfaces over 10 mm thick backing coat CM 1:3 complete all as specified and as directed by Engr-in-Charge.
M&L for 20 mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over screed bed incl pointing in white cement with admixture of pigment to match with shade of granite stone incl grinding and polishing and providing 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes,including dismantling old stone slab & cement bedding etc complete all as specified and as directed. complete all as specified and directed by Engr-in-Charge.
M&L Coloured Glazed ceramic tiles in vertical surfaces350X250X7mm/ 450X350X 7mm thick as in skirting /dado, set and jointed in cement slurry and pointed in coloured cement to match laid over 10mm thick cement backing coat in CM 1:3 complete all as specified and as directed by Engr-in-Charge.
M&L for heavy duty vitrified floor tiles, premium quality of colour & pattern as approved, size 300x300mm, 9.5 to 10mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
M&L for Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles light shade not exceeding 0.36 sqm in floors etc. white or coloured cement to match set and jointed in neat cement slurry and pointed in including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
All as per item No 41 above but vertical surfaces over 10 mm thick backing coat CM 1:3 complete all as specified and as directed by Engr-in-Charge.
M & L For coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in cm 1:6 etc. complete all as specified
M&L For in repairs Providing and laying 80mm thick factory made chamfered edge cement concrete interlocking paver block of M-30 grade with approved colour, design & pattern as in footpath parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including necessary precast kerb stone all along the length complete all as specified and as directed by Engr-in-Charge.
M&L in repairs Figured glass 5 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repair 100 mm dia PTMT grating incl joints with solvent cement ( minimum weight 25 gm ) complete all as specified and as directed by Engr-in-Charge.
S & F in repairs vitreous china wash down water closet [Pedestal pattern] EWC, white [excluding flushing cistern and flush pipe] including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed by Engr-in-Charge.
S&F Vitreous china wash down water closet pan pedastel pattern of size 710x370x810mm (EWC)(couple Closet) white in colour with and incl Soft close Seat cover white closed pattern with flat bottom ,twin flush fittings and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and as directed by Engr-in-Charge.
Fixing only in repairs concealed stop cock of any type and size after cleaning and removing of washer of blockage complete all as specified and as directed by Engr-in-Charge.
S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 1140 mm x 500 mm bowl size 510 mm x 400 mm x 190 mm complete all as specified and as directed by Engr-in-Charge.
S&F in repairs brass chromium plated telescopic Health Faucet (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC water closet seat cover white, closed pattern with mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC bath room cabinet with mirror of size 600 mm x 450 mm pasted coloured with mirror shutter and built in shelves, fixed with CP screws, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by Engr-in-Charge.
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed by Engr-in-Charge.
S&F in repair high quality CP Towel Ring square with round flange fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repair 15mm dia wall mixer hot & cold provision cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 15mm chromium plated, 2 Way Bib Cock heavy duty complete all as specified and as directed by Engr-in-Charge.
Fixing only in repairs angular cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engr-in-Charge.
M&L for Resecuring or easing & adjusting wooden shutters of any description exc 1 sqm and nexc 2 sqm each without taking down from chowkats complete all as specified and as directed by Engr-in-Charge.
Taking down existing chowkats or frames n.exc. 1.5 Sqm each removing to from store or handed over to contractor complete all as specified and as directed by Engr-in-Charge.
Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and as directed by Engr-in-Charge.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed by Engr-in-Charge.
S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing including necessary butt hinges, tower bolt etc complete all as specified and directed by Engineer-in-Charge.
S&F plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
S&F to glazed and skeleton shutters 30mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain chamfered or rounded fitted without and mitred beads for securing glass etc., divided into squares sizes of members of shutters as specified in SSR Part-I, section 8Clause 8.20(a) with sash bars any numbers complete all as specified and directed by Engineer-in-Charge.
S & F second class hard wood 30mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply . The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
M &L for Cutting holes in brick block masonry walls, one brick/block masonry thick wall in cement mortar for inserting hold fast and making good dismantles portion in CM 1:3 or PCC (1:2:4) type B-1 complete all as specified and directed by Engineer-in-Charge.
M& L for treating with tar or coal tar black paint on back of chowkats, area tarred exec 0.1 Sqm but not exceeding 0.5 Sqm each treated with tar or coal for black paint complete all as specified and directed by Engineer-in-Charge.
M& L for treating small articles such as stop, covers, gully grating, hold fasts, and of posts , back of chowkats, etc area not exc 0.1 Sqm each treated with tar or coal tar black paint complete all as specified and directed by Engineer-in-Charge.
S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
S & F 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed by Engineer-in-Charge.
S & F 150 mm long Aluminium anodised Handle, of extruded section Fabricated Type of size complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new or previosuly untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and directed by Engineer-in-Charge.
S&F in repairs sliding/ openable window made up of aluminium anodised section including hold fast/ screw drilled, punching, anchorage rod, aluminium cleats, replacing defective / damaged section with new one making good the disturbed area with existing finishing so as to match with under mentioned specification:- (a) Frame guide of window 92 x 29 x 1.2mm (b) Shutter top and bottom 50 x 20 x 1.5 mm (c) Shutter inter lock section 50 x 20 x 1.5 mm (d) 5 mm thk tinted glass with aluminium glazing clips rubber beads (e) Handle section 39.40 x 17.70 x 1.5 mm (f) Aluminium deco grills, fixed with 'F' channel DG-104 pattern 5.50 mm thick (g) Aluminum xpm wiremesh Note : (i) If exact section is not available in market then next immediate higher section shall be used. (ii) Unit weight shall be calculated as per manufacturer brochure which is supplied along with materials.
Taking down aluminium window /ventilator shutters of any size from the existing aluminium window / ventilators, adjusting the aluminium section members, oiling /greasing for easy functioning of windows and refixing the shutters including taking down MS grill and refixing in the existing frame complete all as specified and directed by Engineer-in-Charge.
S&F Anodised Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item shall be made only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) Supply only 5mm thick sheet glass and aluminium wire cloth be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose . (iv) contractor shall produce manufactuar test certificate purchase voucher and manufacture brochure / pamplet indicating unit weight for payment purpose.
Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
Supply only aluminium anodised 'XPM' of size 3.00 x 1.5mm x 22 Gauge for mosquito proofing using 'U' / glazing clips complete all as specified and directed by Engineer-in-Charge.
S& F in repairs 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all fixed to aluminum shutters including necessary adjustments, dismantling and re-securing complete all as specified and directed by Engineer-in-Charge.
S&F in reparis aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm, Main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid including preparation of new surface and applying two coats of oil bound distemper over a coat of primer including taking down of old false ceiling with board complete all as specified and as directed by Engr-in-Charge
S & F in repair anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engr-in-Charge
S&F in repair 25mm dia stainless steel curtain rails ends complete all as specified and as directed by Engr-in-Charge
S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed by Engr-in-Charge
S&F in repair stainless steel tubing of any diameter or square or rectangular in shape, thickness of wall not more than 16 gauge of grade AISI-316 type aesthestic, anticorrosive in nature as in framed work / Posts / fencing work / railings / grills / designer work,purposily made doom and base welded with tubing where required including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location using sealing compound /screws complete all as specified and as directed by Engr-in-Charge.
M & L for Welding metals in repairs n. exc 2.5 cm in length and not exc 9mm thickness complete all as specified and as directed by Engr-in-Charge
Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls complete all as specified and as directed by Engr-in-Charge
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary clamps etc complete all as specified and as directed by Engr-in-Charge
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary clamps etc to fixing on walls complete all as specified and as directed by Engr-in-Charge
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary clamps etc to fixing on walls complete all as specified and as directed by Engr-in-Charge
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engr-in-Charge
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-Charge
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed by Engr-in-Charge
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engr-in-Charge
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-Charge
S & F 110 mm bore PVC (SWR) bends with access door complete all as specified and as directed by Engr-in-Charge
S&F PVC in repairs (SWR) floor trap diameter of out let 75mm ,plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed by Engr-in-Charge
Demolition of precast concrete block walling built in cement mortar complete all as specified and as directed by Engr-in-Charge
M & L for Pre-cast cement concrete block masonry using PCC solid blocks in 1:3:6, Type C-1 using 20mm graded stone aggregates exceeding in width and setting in cement mortar 1:6 complete all as specified and as directed by Engineer in Charge
M&L for rendering 10 mm thick in CM (1:6) and on brick masonry or stone block masonry or concrete surfaces finished even and smooth complete all as specified and as directed by Engineer in Charge
M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engineer in Charge
M&L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed by Engineer in Charge
M&L for applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation complete all as specified and as directed by Engineer in Charge
M&L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and as directed by Engineer in Charge
M&L for preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed by Engineer in Charge
M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in Charge
M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete after removal corrosive surface by wire brush /sand paper/grinder complete all as specified and as directed by Engineer in Charge
Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and as directed by Engineer in Charge
M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturer's instruction) over a coat of 10mm thick in CM 1:6 on brick/block masonry or concrete surfaces finished even and fair complete all as specified and as directed by Engineer in Charge. NOTE: water proofing compound shall be measured and paid separately.
Supply only water proofing compound conforming to IS-2645 1975.
M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement finished even and smooth complete all as specified and as directed by Engineer in Charge.
M& L for preparing newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed by Engineer in Charge.
M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer in Charge.
M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer in Charge.
M&L for applying a layer of wall care putty on wall/ceiling and making surface even and smooth complete all as specified and as directed by Engineer in Charge.
M&L for Making arrangements for scaffolding in shafts/spot/locationof weed growth,spraying anti weed solution of Herabicide Glyphosate 41% or equivalent on plant /weed leaves without cutting/disturbing the plants on sunny weather and allow the plant /weed to dry for a period of 30 days and removing the weed incuding its root ,making good with CM 1:3 or with Plain Cement Concrete 1:2:4(12.5mm graded aggregates)including two coats of acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer in Charge.
M&L for Filling cracks in wall, columns, beams etc by removing existing plaster and cutting grooves n.exc. 25cm girth and 25mm in depth cleaning and applying water proofing crack sealing compound as per manufacturer's instructions and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer in Charge.
S & F in repairs stainless steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed by Engr-in-Charge
S&F in repair for 1000 Litres PVC rotational moulded polyethylene water storage tank ISI marked double layered (cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.
S&F in repair for 500 Litres PVC rotational moulded polyethylene water storage tank ISI marked double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engr-in-Charge.
S&F in repair for 750 Litres PVC rotational moulded polyethylene water storage tank ISI marked double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engr-in-Charge.
S&F repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 140 mm Floor door stopper brass body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engr-in-Charge.
S&F in repairs curtain rod / harrison rails mild steel chromium plated with fixed brackets , stops, rollers etc, 25 mm dia with fixed brackets , stops rollers etc complete all as specified and as directed by Engr-in-Charge.
Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.
S&F in repairs 100 mm size mild steel Mortice lock 4 lever vertical type complete all as specified and as directed by Engr-in-Charge.
M&L for 40 mm thick padding in roof, chajjas and similar work with Plain Cement Concrete 1:2:4 type B0 (using 12.5mm graded aggregate) nominal mix with WPC @ 3% by weight of mix , if required and surface even and smooth with using extra cement including demolition or chipping of old concrete portion complete all as specified and as directed by Engr-in-Charge.
M&L for applying one coat of indigo floor paint on paver block / chequered tiles including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
S&F in repairs peg set 6 & 4 fixing with wall / tiles / in any description complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repairs only stainless steel friction stay hinges 200 x19 x1.90 mm of standard size complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 100mm long extruded aluminum alloy anodised aluminum handles fixed to window complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engr-in-Charge.
S & F in repairs100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engr-in-Charge.
S & F in repair Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed by Engr-in-Charge.
S & F in repair 18 to 20mm thick pre laminated HDF panels of interior grade type-II with melamine finish of approved shade for kitchen cabinet/wardrobe/wall paneling fixing with necessary fitting like keku fitting,spring clip,hanger plate,push fix or stud fitting as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 100 mm brass handles, fabricated type , polished bright complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 100 mm size hasp and stable , safety type , brass with mild steel hinges pin incuding bolt to hinge plate with screws complete all as specified and as directed by Engr-in-Charge.
S&F in repair continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed by Engr-in-Charge.
S&F in reapirs Teak wood lipping frame 6 mm thick for 18/ 19 mm width fixed with nails/ screws complete all as specified and as directed by Engr-in-Charge.
S&Fin repairs ball catches with 8 mm dia steel ball and brass body and skirting plate including letting in and fixed complete all as specified and as directed by Engr-in-Charge.
S&F in repairs extruded section 100 mm brass barrel tower bolt complete all as specified and as directed by Engr-in-Charge.
T.M.RAMANATHAN AND SONS
M/s Saina Enterprises
ANITA VARMA ENTERPRISES
M/S VISHAL CONSTRUCTION
DEEPAK AGENCIES
MAJUMDAR FURNITURE
Nirman Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .