REPAIR / REPLACEMENT UNSV CABLE, LT PANEL, BUILDING SECURITY LIGHT, INTERNAL WIRING AND CONNECTED ITEMS UNDER GE KAMPTEE.

Amount

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5m in depth for laying of cables, poles, stay and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38 mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 63 mm outer diameter and 51 mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 90 mm outer diameter and 76 mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and directed. Note:- laying of cable route is same as old cable route.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 sq mm, 3.5 core including testing after laid and jointed complete all as specified and directed. Note:- Excavation and earth work sand cushioning pipe/ cable protection shall be measured and paid separetely.

All as per item No. 8 above but cable size 35 sq mm 3.5 core complete all as specified and directed.

All as per item No. 8 above but cable size 16 sq mm 4 core complete all as specified and directed.

All as per item No. 8 above but cable size 10 sq mm 4 core complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600x 6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth strip 30 x 5 mm by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, light grade 7.5m long as applicable and as per plate No. 5 of SSR 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 40mm nominal bore medium grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

S&F heat shrinkable straight through cable jointing kit for 1100 volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 to 185 Sq mm complete all as specified and directed. Note:- Any Excavation and earth work, returning and filling, removing involved shall be measured and paid separately.

All as per item No. 13 above but cable size 70 - 120 sq mm cable size complete all as specified and directed.

All as per item No. 13 above but cable size 25- 50 sq mm cable size complete all as specified and directed.

S&F thermoplastic cable junction boxes IP 55/IP65 with metric knockout for cable entry fixing on pole with mm MS clamps, nut bolts, washers, terminal block and glands suitable for 16/25 Sq mm core cable including 6 amps MCB SP complete all as specified and directed. Make:- HENSEL Cat No. K 9255 or equivalent in Neptune.

S&F LED driver for 60W LED street light fittings complete all as specified and as directed.

S&F LED driver for 45W LED street light fittings complete all as specified and as directed.

S&F LED driver for 25/30W LED street light fittings complete all as specified and as directed.

S&F LED Surge protector for LED street light fittings complete all as specified and as directed.

M&L for plain cement concreate 1:3:6 type C-1 (using 20mm graded stone aggregate) as in copping of pole including necessary form work weathering slightly rounded or clamfered angles & throating exposed surfaces finished fair and even complete all as specified and directed.

Taking down the unserviceable LT panel of any size complete with all accessories complete all as specified and directed.

Supply, install, test and commissioning of LT panel board / feeder pillar box, outdoor cubicle type, vermin proof, dust proof (of CPRI approved manufacturer), fixed on 50x50x5mm MS angle iron frame fixed 300mm above groung level and 450mm below the ground level grouted in and including PCC 1:3:6 type C1 (using 20mm grade stone aggregate) and plane made out of 3.00 mm thick CRCA sheet for both outer shell and 2.00mm hick for inner shell both side open able supported on and including ISMC 75 X 40mm powder coated steel frame and totally powder coated with epoxy siemen grey colour from inside and outside with locking arrangement and fixing arrangement i.e nuts, bolts, washers, clamps etc, with naturally air cooled epoxy insulated aluminium busbar TPN suitable for 300 Amps with detachable gland plate for incoming and outgoing cable including termination of cable ends both incoming and outgoing with sufficient working space inside complete, suitable size to accommodate and consisting of the following items, complete all as specified and directed. (a) Busbar chamebr for 3 phase & nuetral of capacity 300 Amps (30mm x 10mm) alumunium bus bar duly insulated. (b) Multifunctioning meter to measure Voltage, ampere, KWH, PF -1 Nos (c) one set of pilot lamp. (d) Incoming MCCB 160 amps 4 Pole 415 volts 25 KA thermal magnetic setting type- 1 Nos (Make:- Legrand/L&T/Siemens) (e) Outgoing MCCB 63 amps 3 pole 415 volts 10 KA thermal magnetic setting - 5 Nos (Make:-Legrand/L&T / Siemens) (f) Outgoing Type MCB 63 amps 3 Pole 415 volts 10 KA - 2 Nos (Make:- Legrand/ L&T / Siemens)

Supply, install, test and commissioning of LT panel board / feeder pillar box, outdoor cubicle type, vermin proof, dust proof (of CPRI approved manufacturer), fixed on 50x50x5mm MS angle iron frame fixed 300mm above groung level and 450mm below the ground level grouted in and including PCC 1:3:6 type C1 (using 20mm grade stone aggregate) and plane made out of 3.00 mm thick CRCA sheet for both outer shell and 2.00mm hick for inner shell both side open able supported on and including ISMC 75 X 40mm powder coated steel frame and totally powder coated with epoxy siemen grey colour from inside and outside with locking arrangement and fixing arrangement i.e nuts, bolts, washers, clamps etc, with naturally air cooled epoxy insulated aluminium busbar TPN suitable for 400 Amps with detachable gland plate for incoming and outgoing cable including termination of cable ends both incoming and outgoing with sufficient working space inside complete, suitable size to accommodate and consisting of the following items, complete all as specified and directed. (a) Busbar chamebr for 3 phase & nuetral of capacity 400 Amps alumunium bus bar duly insulated. (b) Multifunctioning meter to measure Voltage, ampere, KWH, PF -1 Nos (c) one set of pilot lamp. (d) Incoming MCCB 200 amps 4 Pole 415 volts 25 KA thermal magnetic setting type- 1 Nos (Make:- Legrand/L&T/Siemens) (e) Outgoing MCCB 100 amps 3 pole 415 volts 25 KA thermal magnetic setting - 2 Nos (Make:-Legrand/L&T / Siemens) (e) Outgoing MCCB 63 amps 3 pole 415 volts 25 KA thermal magnetic setting - 3 Nos (Make:-Legrand/L&T / Siemens)

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall / floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified & directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified & directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 28 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

As per item No 28 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

As per item No 28 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

As per item No 28 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 28 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 28 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note:- Accessories for point/ sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

As per item No 35 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

As per item No 35 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

S&F ceiling rose surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

S&F modular switch one way, 6A, 1 module complete all as specified and directed.

S&F modular switch one way, 16A, 1 module complete all as specified and directed.

S&F modular bell push, 6A, 1 module complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular fan step regulator,120 watt, 2 module complete all as specified and directed.

Replacement of worn out MS AC plug box with modular plate, power unit four module, 20 Amps starter, 25 Amps sockets, 25 Amps plug complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat No LCTLN-20-CDL/ Cat No BLTRU 20W NW VIVA of Bajaj/ BN150W LED20S-6500 PSE OD GR of Philips.

S&F light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make:- CG Cat No LBHP-10-CDL or equivalent in Philips / Wipro.

S&F fittings with surface mount LED down lighters 12W including driver with rated voltage 240 V, 50 Hz complete all as specified and directed. Make:- CG Cat No LSDEP-12-CDL or equivalent in Philips / Wipro.

S&F energy efficient surface mounted 2'X2' grid ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make:- CG Cat No LCTLRF6-36-CDL or equivalent in Philips/ Wipro.

S&F LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make:- CG Cat No LCTLN-10-CDL or equivalent in Philips/ Wipro.

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe) 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed. Make:- CG Cat No LSTS-25-CDL or equivalent in Philips/ Wipro.

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

Disconnect and insulate electric supply wire and taking down carefully ceiling/ exhaust/ cabin/ wall fans of any make and sweep dismantling blades, check for repairs required complete all as specified and directed. Note:- Repairs/ Replacement of spares shall be carried out under appropriate items.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing, making of MES No complete all as specified and directed. Note:- The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc.

Hanging only exhaust/cabin/wall fans of make and sweep connecting lug complete with and including provision of copper conductor cord three core PVC insulated and sheathed from ceiling rose to fan connector & testing, making of MES No complete all as specified and directed. Note:- The fan shall be fitted with new set of washers nuts rubber packing etc.

Opening up of fan motor of ceiling/ exhaust/ wall/ cabin fans cleaning starter rotor, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning complete all as specified and directed.

M&L for taking down burnt/ damaged winding, cleaning stator and rotor including slots etc, rewinding with suitable gauge of super enameled copper insulated wire for ceiling fan 1200mm sweep complete all as specified and directed.

All as per item No 63 above but ceiling fan 1400 mm sweep complete all as specified and directed.

S&F bearing of replacement for ceiling fan 1200mm sweep complete all as specified and directed.

All as per item No 65 above but Ceiling fan 1400mm sweep complete all as specified and directed.

S&F gun metal bush for ceiling fan 1200mm sweep complete all as specified and directed.

S&F gun metal bush for ceiling fan 1400mm sweep complete all as specified and directed.

S&F for replacement of condenser AC 230 Volt 2.5 MFD complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.79,925.00]

Paragon Electrotechnics

Sharma Electrical and Services

Vaidehi E Link

Bidder Name

Sharma Electrical and Services

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link