Restoration of LWSS Panyali Rangas inTehsil Nadaun Distt.Hamirpur

Excavation in foundation and trenches etc. in earth work lift upto 1.50 mts stacking the excavated soil not more than 3 meters clear from the edge of excavation & returning the stacked soil in 15 cm layers when reuired into plinths sides of foundations etc. conslidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth as directed with in a lead of 20 meters complete and entire satisfection of Engineer in Charge.

Providing and laying cement concrete 1:4:8(1 cement:4 sand:8 graded stone aggregate 40 mm N/size)and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Brick work using common brunt clay building bricks (2nd class ) in cement mortar 1:4(1Cement:4 Sand)in superstructure sceond class Bircks

Providing and fixing of Fencing Paneel of size 1.20*1.80 Mtr of Jali 25*25 mm mesh welded to MS Black tube 32mm dia. 14 gauge i/c cutting welding and painting etc.

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.

Vertical Surfaces

20mm thick cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering upto floor two level including arrises rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1 cement:6 sand) in all leads and lifts.

Finsing wall with water proofing cement paint or approved brand and manufacture and of required shade on de corated wall surface two coat to give an even shade after thorughly brushing . The surface to removal all dirt, dust and removeing of loose material.

Steel Work built up section inrailing framed work complete in all respect

Applying a priming coat over new steel & other metalle surface & i/c preparign the surface by thorughly cleaning oil , grease & durt & other forign matter scoured with wire brushes fine steel wool srapers & sand Paper complete .(with ready mixed priming paint brushing red lead, red-oxide /zine oxide chrome)