Annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to C & D Group Quarters Varada Block & Arkaavathi Block, Koramangala, Bengaluru From November-2025 to July-2026.

Annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to C & D Group Quarters Varada Block & Arkaavathi Block, Koramangala, Bengaluru From November-2025 to July-2026.

Cleaning of Water Storage Tank or Sump by following method: (1) Empty the Tank/ Sump and make it to near dry, (2) Apply blEaching powder uniformally (@ Tank capacity x 0.5 gms/litre) inside the Tank/ ...

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist f...

External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut ...

Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materi...

UGT/oHT (inside) waterproofing with Anti-microbial Coating - Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae,...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 15 mm nominal bore

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete : 250x10mm

Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 100 mm with plate 150x32 mm

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 25 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy

Providing and fixing chromium plated brass curtain rod with ISI mark hav- ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherev...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished

with necessary screws etc. - 125x65x2.12mm

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 g.

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing solid plastic seat with lid for pedestal type W.C.

pan complete : White solid plastic seat with lid

Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete. Semi rigid pipe : 40 mm dia

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. - 1...

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required,...

Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 4 mm (weight not less than 10kg/m²)

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead, complete as per specifications.

Removal of old broken Glass panes ( any thickness of size, quality or description ) from metal frames, glazed with putty or fixed with beads including cost of labour, complete as per spec...

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres sucti...

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Providing and fixing plain rolled Glass 4mm thick with teakwood beading

Removing white or colour wash by scrapping and sand papering and pre- paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of En...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Repairing and fixing shutters (panelled or glazed) to doors, windows,

ventilators and cupboards.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...

Engaging Carpenter (2nd Class) work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)

Engaging Plumber work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)

Engaging Unskilled (Light Work), work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)

Engaging watchman work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)

Engaging Gardener. work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)

Engaging Supervisor. work should be executed as per direction of the Engineer-in-charge of the work (No KAE 83 LWA 2022 Dated 13-01-2023)