Repair works in Quarter No. S-5 and S-3 in Canal Colony, Sector-16A, Faridabad (Re-invited).

Amount

Scraping HSR No.8.32 (a).

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces HSR No.16.25.

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work HSR No.16.58.

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade HSR No.16.61.

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint HSR No.16.5.

Dismantling reinforced cement concrete with cleaning and straightening and cutting of bars if required HSR No.8.6 (e).

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level HSR No.10.59.

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chhajjas, shelves etc. inclination not exceeding 25 degree with horizontal HSR No.9.1.

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. door and window frame size 127 mm X 50 mm with 40 mm wide double rebate HSR No.18.34 ( C).

Deodar wood door and window shutters including iron hinges, screws, chocks/ cleats and stops, etc., complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same). 35 mm thick (12 mm thick deodar wood panel) HSR No.17.18 (a) (ii)

Damp proof course 75 mm thick of cement concrete 1:2:4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded HSR No.10.114.

First class brickwork laid in cement, stone dust (from crusher) mortar 1:4 in first storey upto 4 metres above plinth level HSR No.11.29.

Cement Concrete 1:6:12 with stone aggregate 40mm nominal size in foundation and plinth HSR No.10.32.

Providing and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Size of ceramic Glazed tiles 300mm x 4500mm HSR No.14.92 (b).

12 mm thick cement plaster 1:4 HSR No.15.5

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified HSR No.13.64.

Wire gauze deodar wood door and window shutters without springs housed in chowkats inclucing chocks/ cleats, iron hinges and scrows, etc., complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same). 30 mm thick HSR No.17.19 (ii).

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean HSR No.13.14.

Mild steel reinforcement for R.C.C. works where not included in the complete rate of R.C.C., including bending binding and placing in position complete HSR No.18.21.

Removing doors and windows (wooden and steel) together with the dismantling of walls doors HSR No.8.17 (a).

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth HSR No.10.41.

Teak wood chowkats of doors and windows including iron hold fasts, corner straps, screws, bolts for hold fasts, etc., complete fixed in position HSR No.17.13.

Deodar wood shutters with vertical styles and rails, as specified in the statement No. I attached in the end of this chapter), with two Nos. ply-wood panels of the specified thickness mentioned below, tongued and mentioned below, tongued and grooved, including the cost of iron hinges, screws, chocks/ cleats, stops etc., complete fixed in position ( excluding the cost of tower bolts and handles, but including the labour for fixing the same). 40 mm thick (12 mm thick commercial plywood panel) HSR No.17.18 (d) (i).

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work HSR No.16.60.

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on old work, one coat to give an even shade HSR No.16.62.

Cement concrete 1:4:8 in F&P

THE BHUSHAN CO. OP L and C SOCIETY LTD. BAHIN