Development of Eco Park and Water Body adjacent to Eco Park in the line of Accoland at Bongaigaon Town under CIDF

Amount

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume)

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like. (ii) Using 25mm thick plank

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4 (1 cement:4 sand)

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. (II) Celling Plastering

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Wall painting (one coat) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on old wall surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a). Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Extra over item no 13.4.3 above for every subsequent coat of wall painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

(d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement paint of approved brand and manufactured.

Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (b)Using Grading II material

(d) Extra lead beyond initial lead of 5.00km @ 25 Km

Supplying, providing, mixing and laying over waterproofing layers/ coatings with cement mortar screed of average 25mm thick or as per drawings/ requirements in proportion 1:4 (1cement : 4sand) admixed with integral waterproofing admixture Conplast X421IC of Fosroc Chemicals /Rheomac 707 of BASF/Dr. Sealkit Normal Plast of (Asian Chemicals)@ 125ml per bag of cement complete as specified and directed by the Department.

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range Somany/ Orient/Nitco /Asian Make (i) Of size 300mmx300mm and above

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (b) Executive range Somany/ Orient/Nitco/Asian Make (ii) Of size 400x400 mm and above

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make i) Of size 200mmx200mm and above (I) Toilet Walls

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles…….

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. b) M. S. Flats…….200x200x12 Th. Base Plate

Providing barbed wire on the existing barbed wire fencing with seven strands of barbed wire 12 S.W. G.x 2pliesx 4 points at 75mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with existing posts of the fencing, including removing rotten barbed wire as directed, complete with strengthening of post and tightening of the old barbed wire and joinining old serviceable pieces on remaining lines as and where necessary and as directed.

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire length and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.

Supplying fitting and fixing M.S. cattle trap fabricated, welde, mitred and jointed as per relevant IS code with ISMB 250 joist spaced not more than 1800mm apart and ISA 65 x 65 x 6 spaced not more than 200mm apart and fixing the same over RCC member / Brick wall complete as specified and directed.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power r For Grading-II Material (Rate as per Analysis)

Sand Bed

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing polished SUN ROCK HIGH CTS/ DEVI paver tiles of approved quality, size, shape of specified thickness over a leveling bedding layer of 30mm compacted sand over a base course of WBM or PCC (Base course to be paid separatly) including cutting where necessary finished with spreading , sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. (A) SUN ROCK HIGH CTS Tiles (Pavers) (c) Silicon (Pavers) 40 mm thick

Providing polished SUN ROCK HIGH CTS/ DEVI paver tiles of approved quality, size, shape of specified thickness over a leveling bedding layer of 30mm compacted sand over a base course of WBM or PCC (Base course to be paid separatly) including cutting where necessary finished with spreading , sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. SUN ROCK HIGH CTS/ Devi Tiles (Pavers) (a) 60 mm thick

Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. A. Using Concrete Mixer

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following. a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.. b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed. c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately).

Boulder apron laid in wire crates (Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 40Kg each.)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications A. Stone/Boulder

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification

Providing Grouting Below Pond Surface by drilling holes @ 300mm c/c in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 20mm dia. for injecting a grout/ grout slurry till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 2 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels. a) Grout slurry of cement, water and grout admixture Cebex 100 of Fosroc Chemicals /Flowcable 50 of BASF/Dr. Sealkit NSPG (Asian Chemicals) @ 225gms per bag of cement

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi) Doors Frame: 0.90x2.1

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) b) With 1st class local wood (Hollock / Gamari/Sundi/ Bonsum) (i) 40 mm thick with panel inserts of 20mm thickness.

Providing, fitting and fixing Bison Panel board (Cement Bonded Particle Board) door shutters fixed to 100mmx38mm wooden frames with necessary hinges, screws, bolts etc. including painting of door shutters (one coat primer and two coats painting) complete as specified and directed by the department for all floors (Door fittings to be measured and paid separately) (a) Using 16mm thick board (iii) Both sides laminated

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )a) Sliding door bolts i) 300mm x 16mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )b) Tower bolts iii) 200mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )c) Door handles iii) 150mm

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.

Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Bottle palm (II) Using earthen pot of 60 cm dia.

Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (D) Bottle Brush / Nil Gulmohar / Debadaru / Weeping Willow

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (F) Paine

Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (C) Korobi / Azalea

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with I. Ordinary soil A. Manual Means (I) Without dewatering Depth upto 3 m

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications cl. no. 1200,1500 & 1700 PCC Grade M20

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification...Without Plasticiser..B. RCC Grade M25 For solid slab super-structure, 20-30 per cent of (a+b+c) Height upto 5m

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate spa

Supplying, fitting and placing TMT bar reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal steel/ Shyam steel or equivalent)

Supply and Installation of counter weight type steel "SLUICE/REGULATOR GATE" as per the drawing and specification and as per the direction of Engineer incharge

Preparation and Installation of Conductive Floor for the movement of Bumper Cars with all necessary fittings @ Rs. 570.00/Sq. ft

Supply and Installation of Bumper Cars @ Rs. 1,25,000.00/Car

Supply of Control Board for controlled movement of cars

STAINLESS STEEL CUBICLE PARTITION: Supply and Installation of Stainless Steel Cubicle Partition as per drawings and Specifications at Toilet Block and Changing Room

POWDER COATED MILD STEEL LOCKERS: Supply and Installation of Power Coated Steel Lockers at Toilet Block and Changing Room

SUPPLYING FITTING AND FIXING M.S RECTANGULAR, SQUARE PIPE WITH RED LEAD PAINT ONE COAT COMPLETE AS DIRECTED.: (To be used in Construction of Fabricated Steel Stagging and Boundary Wall around Water Park)

POOL SIDE DRAIN : Supplying fitting HDPE Channel Of Size Inner W X D - 100 X 160 [ Outer W X D -150 X 202 ] With HDPE Grating [ Load Class Human Load ]

Supply and Installation in all respect Water Slider Type "A" as per given details

Supply and Installation in all respect Water Slider Type "F" as per given details

Supply and Installation in all respect Water Slider Type "K" as per given details

Supply and Installation in all respect Water Slider Type "N" as per given details

Supply and Installation in all respect Water Slider Type "P" as per given details

Supply and Installation in all respect Aqua Play Station /MPWPS (5 platforms) as per given details

Supply and Installation in all respect Water Pool Accessories: Pool Benches

Supply and Installation in all respect Water Pool Accessories: Pool Umbrella

Supply and Installation in all respect Water Pool Accessories: Mushroom Umbrella

Supply of Four Seated FRP Paddle Boat with all necessary equipments

Supply of Life Jackets

Supplying and planting of ornamental ROYESTINIA REGIA (royal palm) trees

COVERED SEATING AREA: Supply and installation of Tensile Structure with Ferrari Membrane/Fabric Single Cone Shape (2 Nos.)

Supply and Installation in all respect playground equipment / Children Play Equipments (i) Seesaw

Supply and Installation in all respect playground equipment / Children Play Equipments (ii) Slide Seesaw

Supply and Installation in all respect playground equipment / Children Play Equipments (iii) Metal Swing

Supply and Installation in all respect playground equipments (iv) Cast Iron Garden Bench

Supply and Installation in all respect playground equipment / Children Play Equipments (v) Spider Web

Supply and Installation in all respect playground equipment / Children Play Equipments (vi) Chimes

Supply and Installation of Pre-cast RCC Garden Bench

Supply and Installation of Pre-cast Garden RCC Bench Type - II

SUPPLY AND INSTALLATION OF FLOWER JET FOUNTAIN WITH CIVIL WORKS: Supply, Installation, Testing & Commissioning of Flower Jet Nozzles Size: 2Inch Body : Brass (Chrome plated)

Supply, Installation, Testing & Commissioning of Flow Controll Volve for Flower Jet Nozzles Size: 2Inch

Supply, Installation, Testing & Commissioning of Under Submersible LED lights to highlight the jets suitable for 12V supply with LED’s (Panasonic / OPTO), 1M flexible cable with cable gland, all complete.SSTOP 304- Grade Model - OWC - 210 3W X 6 Led's 1 8 W Each

Supply, Installation, Testing & Commissioning of Transformer/ SMPS for LED Lights Make –Guru/ Superlec

Designing, Supervising, Installation, Testing & Commissioning of fountain

MAIN DRAIN Provision of 450 MM X 450 MM ABS Square main drain/Round 450 x 450 drain with main frame screwed on base frame duly groutable on the pool bottom deepest part

FILTERED WATER INLET Provision of ABS white filtered water inlet which permits 360ᵒ dispersion of fresh water in the pool, incl. flange, gaskets and Stainless screws. Internal diametre 50 millimetre and 2 inch slip. Flow rate adjustable, max. recommended 14 metre cube per hour. Totally resistant against pool chemicals

STAINLESS STEEL LADDERS Provision of Stainless Steel Ladder of 3 Or 4 Steps made in SS 304 with 38 mm OD ,14 gauge hand rails and anti skid SS trades fitted with nut bolts, 4” dia. flange for fixing on walls. Height 30”. Step size - 21” length and 3”/4” width

TOP MOUNT FILTER PLANT 1200 DIA Provission of anti-corrosive top mount Filter Plant of 1200 dia. manufactured with high quality glass fiber and polyester resins. (Sand Filter - Fiberglass+C28 Reinforced polyester filter With inner gel coat Max flow rate Of = 55,000 (LPH) Dia 1200, With Muliport Valve size = 2” Working Pressure : 2.5 Kg Warranty: 10 Year For Filter & MPV 1 year Warranty)

FILTER MEDIA FOR 1200DIA Provision of QUARTZ SILEX 16/32 & QUARTZ SILEX 8/16 Filter Media

CIRCULATING PUMPS Provision of 3HP Circulating Pump having prefilter Body, Pump Body, Pump base and cover in glass fibre loaded polypropylene resistance to pool chemicals. Prefilter Basket in Polyethene Mononlock Selfpriming 5 year Pump Warranty Pump wayding 1 Year Warranty Ampilear 1 Year Warranty

ELECTRIC STARTER PANEL Provision of Electric Starter Panel

MAINTENANCE ACCESSORIES (i) MATALIC VACUUM HEAD (Metalic Vacuum Head. 50mm connection, length 2 ft.) (ii) TELESCOPIC HANDLE 2.4 -4.8 M (Anodized Aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops with butterfly connection and 2.5-5.0 m Long) (iii) VACUUM HOSE 15 M 1.5" (Floatin Hose Transparent blue plastic vacuum hose 1.5" dia 15 mtrs long including hose cuffs for connection to suction inlets.) (iv) CLEANING CURVED BRUSH (Curved brush made in polypropelene for pool basins and scum liners with wing - nut connection.) (v) DEEP BAG NET (Deep bag net made in polypropelene and white polyester netting with wing-nut connection) (vi) BASIC TEST KIT (Test Kit refill 15 ml For CL & PH)

SWIMMING POOL PLUMBING WITH MATERIAL Provision of Different Dia. Swimming pool Plumbing pipes of pvc material including all necessary accessaries such as socket, elbow, tee, pipe, mta, fta, ball valve, reducer bush, footvalve,solvent etc.

INSTALLATION AND COMMISSIONING Supply,Installation and commissioning of swimming pool filter systems and allied accessories in place with a performance warrantee of 10 Year from the date of supply

Transportation of Drilling rog (order system) with all accessories, compresser machine & developing equal payment & machinaries with drilling compresser etc.

Drilling with Drilling Rog using D.T.H hammer in all kinds of formation including collection of sample at every 3 No.s depth of boring etc.

Extraction of drilling rog against skin portion including washing with well hole properly & fitting bore hole with bantonite powder

Supplying, fitting & fixing M.S cashing pipes of 200 mm dia. with all necessary fitting such as clamp, post etc.

Supplying, fitting & fixing M.S cashing pipes of 150 mm dia. with all necessary fitting etc.

Supplying, fitting & fixing suction pipe of P.V.C material of 50 mm dia. With all necessary fitting such as union socket wirerope etc.

Supplying & installation of 5.00 H.P Cromption /Varana submersible pump made of KSB/CRI for 150 mm dia. Bore size with automatic starter etc.

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White (i) Economy Single Flush (Cat No.C8090/C8055)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (a) White (iv) Flat Back (Cat. No.C0501/72)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal) (A) Parryware Make (a) White (i) Star Basin 550 x 400 (Cat. No.C0450)

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (a) Size 800mm x 600mm

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110 mm x 90 mm

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 110 mm x 75 mm

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) b) 40 mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) f)15 mm dia

(b) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) f)15 mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (ii) Jaquare make (iii)2-Way bib cock

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make (a)Continental /Clarion (i) Standard

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (i) 15mm dia

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (IV) Crabtree Frattini (b) Heavy type ii) Pillar cock long neck Cat. No. 7005

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (III) Jaquar make (iii) Pressure adjustable shower with revolving joint

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. b) 40 mm dia.

Supplying fitting and fixing gun metal check valve including necessary threads to pipes. b) 40 mm dia (Heavy type)

Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. b) 40 mm dia (Heavy type)

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) v) 40 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) vii) 63mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) viii) 75mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) x) 110mm diameter

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. ii) Bore hole of 100mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. (I) G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. i) 50mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe iii) 40mm diameter

Supplying fitting and fixing GI filter 2.00 metre long.

Supplying fitting and fixing check valve (non return valve) including thread to pipes.

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Supplying, fitting and fixing lift and force hand pump of approved with all accessories complete as directed by the Department..

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (I) 2000 Lt capacity (a) Sintex make

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. (a) 2000 litre capacity

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (III) 1000 litre capacity (a) Sintex make

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. (c) 1000 litre capacity

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 35.1.1 25 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 25 KVA,, 11/0.433 KV, .3 Star, 3 Phase (KEPL make)

Supplying fitting and fixing of transformer bushing

Heat curing and tanking of transformer

Oil filter and filling after dehydration of transformer

Supplying fitting and fixing of transformer new gasket set complete

Cleaning, painting, varnishing oftransformer tank both inside and outside

Testing of transformer

Supplying and erection PSC pole 8.5 metre long, the pole is to be erection in 1:2:3 plain cement concrete foundation of size 1.50 m x 0.45 m x 0.45m having P.C.C base foundation 15 cm x 60 cm x 60cm including edge brick soiling and plastering above G.L. portion (0.30 metre complete with excavation of earth, handling of Surplus Soil, debris etc. to the proper place and refilling etc. as specified and as directed by the department.

Supplying and erection of H.T. stay set complete (Galvanize with 19mm dia x1.8m long stay rod anchor plate of size 30cm x 30cm x6.4 mm thimble stay clamps tube buckle (19mmx 60c 7/3.15 mm dia G.I stay and strain insulation etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate 40mm nominal size foundation including excavation and refilling etc. as required and as directed by the department.

Supplying and fitting fixing of 11 KV T Cross arm complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and erection of 11 KV Pin insulator (Poly) with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department.

Supply and erection of 15/ 6 amp aerial fuse complete as required and as directed by the department.

Supplying and erection of 30 Amp aerial fuse complete as required and as directed by the department.

Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department.

Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department.

Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly) set complete as required and as directed by the department.

Supplying and fitting fixing pole clamp complete as required and as directed by the department.

Supplying and fitting fixing of P.G. clamp for Rabbit conductor complete as required and as directed by the department.

Supplying including installation of 4' dia. C.I. earth pipe complete as required and as directed by the department.

Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department.

Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Extra Long point up to 15.00 metre. length.

Extra Long point up to 20.00 metre. Length.

Extra Long point up to 25.00 metre. Length.

Wiring for drawing sub-main line with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, including connection as required complete as directed and specified by the Deptt. With 2 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system,

With 3 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

With 2 x 16 sq. mm. + earth continuity with 1x 10 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface with flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 3 x 2.5 sq. mm. + earth continuity with 2x1.5 sq. mm. cable in flat 19mm ISI marked casing 'n' capping system..

With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system.

With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system.

With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system.

With 3 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 4 x 2.5 sq. mm. + earth continuity with 2 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system.

With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. ISI marked casing 'n' capping system.

With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system.

With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system.

Supplying and fixing 19 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) on surface including painting etc. as required:

Supplying and fixing 25 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) on surface including painting etc. as required:

Supplying and fixing 32 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) on surface including painting etc. as required:

Supplying and fixing 38 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) on surface including painting etc. as required:

Supplying and fixing 50 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) on surface including painting etc. as required:

Supplying and fixing 50 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:

Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 100 mm x 100 mm x 60 mm deep (Nominal size )

100 mm x 150 mm x 60 mm deep (Nominal size )

100 mm x 175 mm x 60 mm deep (Nominal size )

200 mm x 150 mm x 60 mm deep (Nominal size )

200 mm x 200 mm x 60 mm deep (Nominal size )

200 mm x 250 mm x 60 mm deep (Nominal size )

200 mm x 300 mm x 60 mm deep (Nominal size )

250 mm x 300 mm x 60 mm deep (Nominal size)

250 mm x 350 mm x 60 mm deep (Nominal size )

200 mm x 350 mm x 60 mm deep (Nominal size )

Supplying and fixing of Switch/Socket flush type 6Amps (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing PVC/ MS board including connection as approved by the Deptt.)complete as required.

Supplying and fixing of Switch/Socket flush type 16Amps (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing PVC/ MS board including connection as approved by the Deptt.)complete as required.

Supplying and fixing of Switch & Socket combined 6Amps (S combine , (I.S.I. approve (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on existing PVC/ MS board including connection as approved by the Deptt.)complete as required

Supplying and fixing of Switch & Socket combined 16Amps (S combine , (I.S.I. approve (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on existing PVC/ MS board including connection as approved by the Deptt.)complete as required

Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.)complete as required

Supplying and fixing of Plain Pendent holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) with twin twisted flexible cord including connection as approved by the Deptt.)complete Without Lamp

Supplying and fixing of Plain Pendent holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) with twin twisted flexible cable including 11 W CFL lamp and connection as approved by the Deptt.)as required.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp

Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including connection as approved by the Deptt.)as required. Without lamp.

Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including 20 watts CFL lamp and connection as approved by the Deptt.)as required.

Supplying and fixing of bulk head fitting complete with all accessories including connection as approved by the Deptt.)as required. (Labour charge

Supplying and fixing of 250/305 mm dia (Nominal size flush type circular ceiling fittings complete with holder, Aluminium anodized back plate and brass holder, 20 Watt CFL lamp including connection as approved by the Deptt.)as required.

Supplying and fitting of 5/9 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying and fitting of 11/15 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Providing and fixing of 16/0.20 mm twin twisted flexible cotton braided cable in polythene pipe of suitable size on the floor/wall or side of the table/door as required.

Installation, testing and commissioning of pre-cabled fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling/wall including connection as approved by the Deptt.)with 1.5 sq mm PVC insulated copper cables as required.

Installation, testing and commissioning of pre-cabled fluorescent of all types, complete with all accessories and tubes etc. including supplying ball and socket arrangement, suspension down rod of 19 mm dia H.G. conduit up to 30 cm length including painting and connection as approved by the Deptt.)with 1.5 sq. mm copper cables as required.

Supplying and fixing of 19 mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) for street light water tight bracket including bending to shape and Wiring with 1.5 sq. mm size aluminium weather proof PVC cable etc.. as required.

Supplying and fixing of 40 mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) for street light water tight bracket including bending to shape and Wiring with 1.5 sq. mm size aluminium weather proof PVC cable etc.. as required.

Installation, testing and commissioning of ceiling fan including the regulator /down rod of standard size (Up to 300 mm ) length including connection as approved by the Deptt.)as required.

Cutting including threading and fitting of G.I. pipe heavy gauge down rod for ceiling fans etc. as required (Labour charge)

Supplying extra down rod of 10 cm long G.I. pipe 20 mm dia heavy gauge including painting etc. as required

Supplying extra down rod of 10 cm long G.I. pipe 15 mm dia heavy gauge including painting etc. as required

Supplying extra down rod of 20 cm long G.I. pipe 20 mm dia heavy gauge including painting etc. as required

Supplying extra down rod of 20 cm long G.I. pipe 15 mm dia heavy gauge including painting etc. as required

Supplying extra down rod of 30 cm long G.I. pipe 20 mm dia heavy gauge including painting etc. as required

Supplying extra down rod of 30 cm long G.I. pipe 15 mm dia heavy gauge including painting etc. as required

Carriage of Ceiling fans/ exhaust and regulator from store to site as required within 30-km radius.

Numbering of ceiling fans/exhaust fans as required

Installation of Exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete

Installation of Exhaust fan up to 510 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete

Extra for fixing the Louvers/Shutters complete with frame for exhaust fans of all sizes

Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete

Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 450/600/900/1000 mm made of aluminium alloy or wrought aluminium suitable for 200 amp capacity complete with all accessories including connection etc. as required complete

Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required.

Providing and fixing I.C.S.P and N link Main Switch of 240 Volt grade ( HPL/ GECO / ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 16 Amps Capacity S.P.N

30/32 Amps Capacity S.P.N

60/63 Amps Capacity D.P. & N

Supplying fixing I.C.T.P and N link Main Switch with rewire able fuses of 500 Volt grade( HPL/ GECO / ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 16/20 Amps Capacity T.P.N

30/32 Amps Capacity T.P. N

60/63 Amps Capacity T.P. N

100 Amps Capacity T.P. N

200 Amps Capacity T.P. N

Providing and fixing I.C.T.P and N link Main Switch fuse units with H.R.C fuses( HPL/ GECO / ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 30/32 Amps Capacity

60/63 Amps Capacity

100 Amps Capacity

200 Amps Capacity

320 Amps Capacity

400 Amps Capacity

Providing and fixing I.C. Distribution fuse boards with rewire able fuses 250 Volt grade, 16 Amps per way ( HPL/ GECO / ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required. 2-way Capacity

3-way Capacity

4-way Capacity

6-way Capacity

8-way Capacity

Providing and fixing I.C.T.P and N distribution fuse boards with rewire able fuses 415 Volt grade,( HPL/ GECO / ANCHOR or equivalent make) 16/32/63 Amps per way including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 4-way T.P.D.B 16 Amps/way

8-way T.P.D.B 16 Amps/way

4-way T.P.D.B 32 Amps/way

8-way T.P.D.B 32 Amps/way

4-way T.P.D.B 63 Amps/way

8-way T.P.D.B 63 Amps/way

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 20A Capacity. (ABB, Schneider MG, legrand, Hager make)

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. ABB, Schneider MG, legrand, Hager make) 20 A Capacity.

30/32A Capacity.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB enclosure incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 1 way single door

2 way single door

3 way single door

4 way single door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) for 100A 3P/4P MCCB

for 125A 3P/4P MCCB

for 160A 3P/4P MCCB

for 250A 3P/4P MCCB

for 250/315A 3P/4P MCCB

for 400/630A 3P/4P MCCB

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 20A Capacity. (C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make)

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. (C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make) 20 A Capacity.

30/32A Capacity.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB enclosure incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Schneider neo break, C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make 1 way single door

2 way single door

3 way single door

4 way single door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Schneider neo break, C&S, Havells, INDOASIAN, HPL, V-Guard or equivalent make as approved by the Deptt.) for 100A 3P/4P MCCB

for 125A 3P/4P MCCB

for 160A 3P/4P MCCB

for 250A 3P/4P MCCB

for 250/315A 3P/4P MCCB

for 400/630A 3P/4P MCCB

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way SPN single door

6 way SPN single door

8 way SPN single door

12 way SPN single door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way SPN double door

6 way SPN double door

8 way SPN double door

12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Schneider neo break, C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make) 4 way SPN single door

6 way SPN single door

8 way SPN single door

12 way SPN single door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Schneider neo break, C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make) 4 way SPN double door

6 way SPN double door

8 way SPN double door

12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) Richa, Bentec, Adhunic, V-Guard make) 4 way SPN double door

6 way SPN double door

8 way SPN double door

12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (8+12) double door

6 way TPN (8+18) double door

8 way TPN (8+24) double door

12 way TPN (8+36) double door

MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, LEGRAND, AND HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDO ASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB (Conform to IS / IEC 60898-1:200/ MCCB (Conform to IS/IEC 60947- RCCB (Conform to IS/IEC 12640 / 61008) 16.1 Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

C Series (Schneider MG, legrand, Hager make) 6 to 32A

3. D Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

C Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

3. D Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 25A

100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 25A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity DP RCBO (ABB, Schneider MG, legrand, Hager make) 16A

100mA sensitivity DP RCBO (ABB, Schneider MG, legrand, Hager make) 16A

300mA sensitivity DP RCBO (ABB, Schneider MG, legrand, Hager make) 16A

Supplying with fitting and fixing Surge protector of max operating voltage 350V at 400V network for maximum discharge current 40KA, with operator indicator and draw out cartridge of Schneider or equivalent make), of the following ways complete with making necessary connection as approved, specified and directed by the deptt. Surge protection Max operating voltage 350Vintegrated type 1P

Surge protection Max operating voltage 340V Standard type 1P

Supplying with fitting and fixing Over Voltage protector at 400V network Schneider or equivalent make, complete with making necessary connection as approved, specified and directed by the deptt.

CHANGE OVER 400A

Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board of size 1250mm 800mm x 500mm made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Provision for 125A 4Pole 50KA 415V MCCB INCOMING Provision for 1nos MCCB and 14nos DP MCB OUTGOING. 3Phase K.W.H meter L & T make) Single Phase K.W.H meter L & T make) 0-125 A Moving Iron Ammeter (Digital) 0-500 V Moving Iron Voltmeter (Digital) Ammeter S/S in 3Position Voltmeter S/S in 3 position Indicator Lamp (R,Y, B) 2A Solid Lock Fuse 100/5 CT Coils Control Wiring Incoming and Outgoing MCCB/MCB will be paid extra.

Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid G.I. tube having 85 mm dia. single prong at top and 3 mm base plate at bottom complete with fitting & fixing with G.I. nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast with 1 X 18 watt Fluorescent tube.(Crompton Greaves make) Model- DZL18EB DAZZLE with Power Lux Lamp or equivalent ) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast with 1 X 36 watt Fluorescent tube.(Crompton Greaves make) Model- DZL36EB DAZZLE with Power Lux Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast / Channel type luminaries complete with bright aluminium reflector & decorative silver coloured end caps and Electronic ballast with 1 X 36 watt Fluorescent tube. (Crompton Greaves make) Model- DZL36EB DAZZLE with Super Saver Lamp/ DMLUR14EB SPARKLER with Power Lux Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

Channel type luminaries complete with bright aluminium reflector & decorative silver coloured end caps and Electronic ballast with 1 X 36 watt Fluorescent tube.(Crompton Greaves make) Model- DMLUR14EB SPARKLER with Super Saver Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

Supplying including fitting and fixing of the following electronic igniters complete as directed and specified by the deptt. (Philips/Havells/Bajaj make) SN 58/02 for SON -150/250/400 W MHD TD 150W

SN 57/02 SON 70 W/MHN TD 70 W

SN Sq-son 1000 W LAMP

SL 51/ 02 For Metal Halide 250/400 W

SL 52/ 02 Metal Halide 2 KW/1 KKW

IN 124 S SON -150/250/400W MHD-TD-150 W

S x 7234/02 Son 35/55 W

Supplying including fitting and fixing of the following Electromagnetic Ballast for TL/TL-TD lamps complete as directed and specified by the deptt. (Philips/Havells/Bajaj make) PTA 036 K 371 For TLD-36 W/ TL-40 W

PTA 036 K 372 For TLD-36 W/ TL-40 W

PTA 018 K 371 TLD-18 W/ TL-20 W

PTA 065/271 TLD-58 W/ TL-65 W

BTA 036/K 361 TLD-36 W/ TL-40 W

PTA 036/361 TLD-36 W/ TL-40 W

BTA 018 K 261 TLD-18 W/ TL-20 W

BTA 036 K 361 TLD-36 W/ TL-40 W

BTA 036 K 261 TLD-36 W/ TL-40 W

BTA 036 X 365 TLD-36 W/ TL-40 W

SILVERLINE TLD-36 W/ TL-40 W

10. Supplying including fitting and fixing of the following HID/Son/Son T plus/MHN-TD/MH lamps complete as directed and specified by the deptt. (Philips/Havells/Bajaj make) SON lamp 70 W without igniters

SON lamp 70 W with igniters

SON lamp 150 W Elliptical

SON lamp 250 W Elliptical

SON lamp 400 W Elliptical

SON lamp 70 W Tubular

SON lamp 150 W Tubular

SON lamp 250 W Tubular

SON lamp 400 W Tubular

SON T lamp 1000 W E-E40

SOX 35 W By 22 d

SON T Plus lamp 70 W E27

SON T Plus lamp 150 W E40

SON T PIA Plus lamp 250 W

SON T PIA Plus lamp 400 W E-E40

SON T PIA Plus lamp 600 W E40

Master SON PIA Plus 250 W/220 E40

Master SON PIA Plus 400 W/220 E40

( MHN TD-DE Metal halide 70 W

(MHN TD-DE Metal halide 150 W

( MHN TD 70 W/730 RX7

MHN TD 150 W /730

(w) MH 70 W/PE-27

(w) MH 70 W/640 E-27 CL

(x) MH 150 W/640 E-27 CL

11. Supplying including fitting and fixing of the following GLS lamp complete as directed and specified by the deptt. (Philips or equivalent) 230 V 25W / 40W/ 60W GLS clear Bayonet Cap

230 V 100W GLS clear Bayonet Cap

250 V 200W GLS clear Bayonet Cap

Night lamp Frosted

230 V 25 W Candle BC Clear

230 V 25 W BC Clear Pearl candle

230 V 40 W candle E-14 Clear

230 V 40 W candle E-14 Pearl

Supply with fitting & fixing 60 mm dia 1830 mm height integrated with acrylic diffuser, translucent top, bottom clear , black powder painted finish tubular pole .The pole is made of GI tube with GI cylindrical control box with service door and a circular base plate, pre-cabled with control gear, 36 W CFL lamp and suitable for operation on 240 V 50 Hz single phase AC supply . The pole is to be fitted on 1:3:6 PCC pole foundation of size 300 mmx300 mmx1200 mm with grouting nuts & bolts as specified & directed by the deptt .(Metal Coats make). COBRA model or equivalent.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model 1050 mm Sweep (ORIENT PSPO make)

Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)

Premium model 1400 mm Sweep. (ORIENT PSPO make) /Premium model 1400 mm Sweep SS-390 Deco. Havells make)

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Ventilator DX 250 mm sweep Louver type (ORIENT make), Brisk Air 250 mm sweep Louver type/ Trans Air 150 mm sweep (Crompton make), Ventil Air DX 150 mm sweep Louver type (Havells make)

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 250 VA Auto Cut Input 90-280 V Out put 200-240 V

250 VA Automatic Input 90-280 V Out put 200-240 V

500VA Automatic Input 90-280 V Out put 200-240 V

1.0 KVA Automatic Input 90-280 V Out put 200-240 V

2.0 KVA Automatic Input 90-280 V Out put 200-240 V

3.0 KVA Automatic Input 90-280 V Out put 200-240 V

4.0 KVA Automatic Input 90-280 V Out put 200-240 V

5.0 KVA Automatic Input 90-280 V Out put 200-240 V

8.0 KVA Automatic Input 90-280 V Out put 200-240 V

10.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY 4.00 Sq.mm 2 Core armoured U.G. cable

6.00 Sq.mm 2 Core armoured U.G. cable

10.00 Sq.mm 2 Core armoured U.G. cable

16.00 Sq.mm 2 Core armoured U.G. cable

25.00 Sq.mm 2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 Core A2XWY A2XFY 4.00 Sq.mm 3 Core armoured U.G. cable

6.00 Sq.mm 3 Core armoured U.G. cable

10.00 Sq.mm 3 Core armoured U.G. cable

16.00 Sq.mm 3 Core armoured U.G. cable

25.00 Sq.mm 3 Core armoured U.G. cable

35.00 Sq.mm 3 Core armoured U.G. cable

50.00 Sq.mm 3 Core armoured U.G. cable

70.00 Sq.mm 3 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

95.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

150.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

400.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

500.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

630.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4 Core A2XWY A2XFY 4.00 Sq. mm.4 Core armoured U.G. cable

6.00 Sq. mm.4 Core armoured U.G. cable

10.00 Sq. mm.4 Core armoured U.G. cable

16.00 Sq. mm.4 Core armoured U.G. cable

25.00 Sq. mm.4 Core armoured U.G. cable

35.00 Sq. mm.4 Core armoured U.G. cable

50.00 Sq. mm.4 Core armoured U.G. cable

70.00 Sq. mm.4 Core armoured U.G. cable

95.00 Sq. mm.4 Core armoured U.G. cable

120.00 Sq. mm.4 Core armoured U.G. cable

50.00 Sq. mm.4 Core armoured U.G. cable

185.00 Sq. mm.4 Core armoured U.G. cable

240.00 Sq. mm.4 Core armoured U.G. cable

300.00 Sq. mm.4 Core armoured U.G. cable

400.00 Sq. mm.4 Core armoured U.G. cable

500.00 Sq. mm.4 Core armoured U.G. cable

630.00 Sq. mm.4 Core armoured U.G. cable

Supply and laying of following numbers and size of armoured cable in same trench, PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 1 Core A2XWY 2x16.00 Sq. mm. 1 Core armoured U.G. cable

2x25.00 Sq. mm. 1 Core armoured U.G. cable

2x35.00 Sq. mm. 1 Core armoured U.G. cable

2x50.00 Sq. mm. 1 Core armoured U.G. cable

2x70.00 Sq. mm. 1 Core armoured U.G. cable

2x95.00 Sq. mm. 1 Core armoured U.G. cable

3x 16.00 Sq.mm 1 core armoured U.G. cable

3x25.00 Sq.mm 1 core armoured U.G. cable

3x 35.00 Sq.mm 1 core armoured U.G. cable

3x 50.00 Sq.mm 1 core armoured U.G. cable

3x 70.00 Sq.mm 1 core armoured U.G. cable

3x 95.00 Sq.mm 1 core armoured U.G. cable

3x120.00 Sq.mm 1 core armoured U.G. cable

4x 16.00 Sq.mm 1 core armoured U.G. cable

4x25.00 Sq.mm 1crore armoured U.G. cable

4x 35.00 Sq.mm 1 core armoured U.G. cable

4x 50.00 Sq.mm 1 core armoured U.G. cable

4x 70.00 Sq.mm 1 core armoured U.G. cable

4x 95.00 Sq.mm 1 core armoured U.G. cable

4x 120.00 Sq.mm 1 core armoured U.G. cable

4x150.00 Sq. mm. 1 Core armoured U.G. cable

4x185.00 Sq. mm. 1 Core armoured U.G. cable

4x240.00 Sq. mm. 1 Core armoured U.G. cable

4x300.00 Sq. mm. 1 Core armoured U.G. cable

4x400.00 Sq. mm. 1 Core armoured U.G. cable

4x 500.00 Sq. mm. 1 Core armoured U.G. cable

4x630.00 Sq. mm. 1 Core armoured U.G. cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 2, 2XWY 2XFY 4.00 Sq.mm 2 Core armoured U.G. cable

6.00 Sq.mm 2 Core armoured U.G. cable

10.00 Sq.mm 2 Core armoured U.G. cable

16.00 Sq.mm 2 Core armoured U.G. cable

25.00 Sq.mm 2 Core armoured U.G. cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 core A2XWY A2XFY 4.00 Sq.mm 3 Core armoured U.G. cable

6.00 Sq.mm 3 Core armoured U.G. cable

10.00 Sq.mm 3 Core armoured U.G. cable

16.00 Sq.mm 3 Core armoured U.G. cable

25.00 Sq.mm 3 Core armoured U.G. cable

35.00 Sq.mm 3 Core armoured U.G. cable

50.00 Sq.mm 3 Core armoured U.G. cable

70.00 Sq.mm 3 Core armoured U.G. cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 25.00 Sq. mm.3 & 1/2 Core armoured cable

35.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

50.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

70.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

95.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

120.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

150.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured/Armour (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4 Core, 2XWY 2XFY 4.00 Sq. mm.4 Core U.G. armoured cable

6.00 Sq. mm.4 Core U.G. armoured cable

10.00 Sq. mm.4 Core U.G. armoured cable

16.00 Sq. mm.4 Core U.G. armoured cable

25.00 Sq. mm.4 Core U.G. armoured cable

35.00 Sq. mm.4 Core U.G. armoured cable

50.00 Sq. mm.4 Core U.G. armoured cable

70.00 Sq. mm.4 Core U.G. armoured cable

95.00 Sq. mm.4 Core U.G. armoured cable

120.00 Sq. mm.4 Core U.G. armoured cable

Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid through medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) / partially in air as required for connection as directed, including excavation of trench, refilling reconstruction of damaged done to road, drain, wall et as specified by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 400sq mm 3 Core armoured 11 KV H.T. U.G. cable laid through 150mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Supply and laying of following numbers and size of Stranded compact Circular Aluminium Conductor, Conductor Screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with Copper tape (0.3kA for 1se , AL flat strip / round armoured and overall PVC sheathed cable confirming to IS 7098 / (PART-I 1985 with latest amendments, laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 120 cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 11 KV(E) Flat Strip Armoured 4x 70.00 Sq.mm 1 core armoured U.G. cable

4x 95.00 Sq.mm 1 core armoured U.G. cable

4x 120.00 Sq.mm 1 core armoured U.G. cable

4x150.00 Sq. mm.1 Core U.G. armoured cable

4x185.00 Sq. mm.1 Core U.G. armoured cable

4x240.00 Sq. mm.1 Core U.G. armoured cable

4x300.00 Sq. mm.1 Core U.G. armoured cable

4x400.00 Sq. mm.1 Core U.G. armoured cable

Supply and laying of following numbers and size of Stranded compact Circular Aluminium Conductor, Conductor Screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with Copper tape (0.3kA for 1se , AL flat strip / round armoured and overall PVC sheathed cable confirming to IS 7098 / (PART-I 1985 with latest amendments, laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 120 cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 11 KV (E) Round Armoured 4x 70.00 Sq.mm 1 core armoured U.G. cable

4x 95.00 Sq.mm 1 core armoured U.G. cable

4x 120.00 Sq.mm 1 core armoured U.G. cable

4x150.00 Sq. mm.1 Core U.G. armoured cable

4x185.00 Sq. mm.1 Core U.G. armoured cable

4x240.00 Sq. mm.1 Core U.G. armoured cable

4x300.00 Sq. mm.1 Core U.G. armoured cable

4x400.00 Sq. mm.1 Core U.G. armoured cable

Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 70mm 3 Core armoured 11 KV H.T. U.G. cable

70mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

95mm 3 Core armoured 11 KV H.T. U.G. cable

95mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

120sq mm 3 Core armoured 11 KV H.T. U.G. cable

120sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

150sq mm 3 Core armoured 11 KV H.T. U.G. cable

150sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

185sq mm 3 Core armoured 11 KV H.T. U.G. cable

185sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

240sq mm 3 Core armoured 11 KV (E) H.T. U.G. cable

240sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

300 sq mm 3 Core armoured 11 KV H.T. U.G. cable

300 sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

400sq mm 3 Core armoured 11 KV H.T. U.G. cable

400sq mm 3 Core armoured 11 KV (UE) H.T. U.G. cable

70mm 3 Core armoured 33 KV H.T. U.G. cable

95mm 3 Core armoured 33 KV H.T. U.G. cable

95mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

120sq mm 3 Core armoured 33 KV H.T. U.G. cable

120sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

150sq mm 3 Core armoured 33 KV H.T. U.G. cable

150sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

185sq mm 3 Core armoured 33 KV H.T. U.G. cable

185sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

240sq mm 3 Core armoured 33 KV H.T. U.G. cable

240sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

300 sq mm 3 Core armoured 33 KV H.T. U.G. cable

300 sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

400sq mm 3 Core armoured 33 KV H.T. U.G. cable

400sq mm 3 Core armoured 33 KV (UE) H.T. U.G. cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 1, A2XWY 4x16 Sq.mm single core armoured cable

4x25 Sq.mm single core armoured cable

4x35 Sq.mm single core armoured cable

4x50 Sq.mm single core armoured cable

4x70 Sq.mm single core armoured cable

4x95 Sq.mm single core armoured cable

4x120 Sq.mm single core armoured cable

4x150 Sq.mm single core armoured cable

4x185 Sq.mm single core armoured cable

4x240 Sq.mm single core armoured cable

4x300 Sq.mm single core armoured cable

4x400.00 Sq.mm single core armoured cable

4x500 Sq.mm single core armoured cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 2 A2XWaY A2XFaY 4 Sq.mm two core armoured cable

6 Sq.mm two core armoured cable

10 Sq.mm two core armoured cable

16 Sq.mm two core armoured cable

25 Sq.mm two core armoured cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3 A2XWY A2XFY 4 Sq.mm three core armoured cable

6 Sq.mm three core armoured cable

10 Sq.mm three core armoured cable

16 Sq.mm three core armoured cable

25 Sq.mm three core armoured cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5 A2XFY 25 Sq.mm 3 and 1/2 core armoured cable

35 Sq.mm 3 and 1/2 core armoured cable

50 Sq.mm 3 and 1/2 core armoured cable

70 Sq.mm 3 and 1/2 core armoured cable

95 Sq.mm 3 and 1/2 core armoured cable

120 Sq.mm 3 and 1/2 core armoured cable

150 Sq.mm 3 and 1/2 core armoured cable

185 Sq.mm 3 and 1/2 core armoured cable

240 Sq.mm 3 and 1/2 core armoured cable

300 Sq.mm 3 and 1/2 core armoured cable

400.00 Sq.mm 3 and 1/2 core armoured cable

500 Sq.mm 3 and 1/2 core armoured cable

630 Sq.mm 3 and 1/2 core armoured cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 4 A2XWY A2XFY 10 Sq.mm four core armoured cable

16 Sq.mm four core armoured cable

25 Sq.mm four core armoured cable

35 Sq.mm four core armoured cable

50 Sq.mm four core armoured cable

70 Sq.mm four core armoured cable

95 Sq.mm four core armoured cable

120 Sq.mm four core armoured cable

150 Sq.mm four core armoured cable

185 Sq.mm four core armoured cable

240 Sq.mm four core armoured cable

300 Sq.mm four core armoured cable

400.00 Sq.mm four core armoured cable

500 Sq.mm four core armoured cable

630 Sq.mm four core armoured cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 2, 2XY 4.00 Sq.mm 2 Core Unarmoured

6.00 Sq.mm 2 Core Unarmoured U.G. cable

10.00 Sq.mm 2 Core Unarmoured U.G. cable

16.00 Sq.mm 2 Core Unarmoured U.G. cable

25.00 Sq.mm 2 Core Unarmoured U.G. cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3, 2XY 4.00 Sq.mm 3 Core Unarmoured

6.00 Sq.mm 3 Core Unarmoured U.G. cable

10.00 Sq.mm 3 Core Unarmoured U.G. cable

16.00 Sq.mm 3 Core Unarmoured U.G. cable

25.00 Sq.mm 3 Core Unarmoured U.G. cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5, 2XY 25.00 Sq. mm.3 & 1/2 Core Unarmoured

35.00 Sq. mm.3 & 1/2 Core U.G. Unarmoured cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 4, 2XY 4.00 Sq. mm.4 Core Unarmoured

6.00 Sq. mm.4 Core Unarmoured

10.00 Sq. mm.4 Core Unarmoured

16.00 Sq. mm.4 Core Unarmoured

25.00 Sq. mm.4 Core Unarmoured

35.00 Sq. mm.4 Core U.G. Unarmoured cable

Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 1 Core, 2XY 2x16.00 Sq. mm.1 Core Unarmoured

2x 25.00 Sq. mm.1 Core Unarmoured

2x35.00 Sq. mm.1 Core U.G. Unarmoured cable

Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . RG 6 armoured

RG 11 armoured

Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . RG - 6 armoured

Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . RG 6 armoured

RG 11 armoured

Supplying including installation of cast iron cable marker as specified and directed by the deptt.

Supply and laying of following size armoured telephone cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 20 pair

Supply and laying of following size armoured telephone cable laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 20 pair

Supplying, laying of HDPE Pipe /DUCT IS 4984: 1995 as required in the existing trench, through micro tunneling, as directed and specified by the department. 63 mm PE63 GRADE PN2.5

75 mm PE63 GRADE PN2.5

90 mm PE63 GRADE PN2.5

110 mm PE63 GRADE PN2.5

40 mm PE63 GRADE PN4

50 mm PE63 GRADE PN4

63 mm PE63 GRADE PN4

75 mm PE63 GRADE PN4

90 mm PE63 GRADE PN4

110 mm PE63 GRADE PN4

32 mm PE63 GRADE PN6

40 mm PE63 GRADE PN6

50 mm PE63 GRADE PN6

63 mm PE63 GRADE PN6

75 mm PE63 GRADE PN6

90 mm PE63 GRADE PN6

110 mm PE63 GRADE PN6

20 mm PE63 GRADE PN10

25 mm PE63 GRADE PN10

32 mm PE63 GRADE PN10

40 mm PE63 GRADE PN10

50 mm PE63 GRADE PN10

63 mm PE63 GRADE PN10

75 mm PE63 GRADE PN10

90 mm PE63 GRADE PN10

110 mm PE63 GRADE PN10

50 mm PE80 GRADE PN4

63 mm PE80 GRADE PN4

75 mm PE80 GRADE PN4

90 mm PE80 GRADE PN4

110 mm PE80 GRADE PN4

40 mm PE80 GRADE PN6

50 mm PE80 GRADE PN6

63 mm PE80 GRADE PN6

75 mm PE80 GRADE PN6

90 mm PE80 GRADE PN6

110 mm PE80 GRADE PN6

32 mm PE80 GRADE PN8

40 mm PE80 GRADE PN8

50 mm PE80 GRADE PN8

63 mm PE80 GRADE PN8

75 mm PE80 GRADE PN8

90 mm PE80 GRADE PN8

110 mm PE80 GRADE PN8

32 mm PE80 GRADE PN10

40 mm PE80 GRADE PN10

50 mm PE80 GRADE PN10

63 mm PE80 GRADE PN10

75 mm PE80 GRADE PN10

90 mm PE80 GRADE PN10

110 mm PE80 GRADE PN10

50 mm PE100 GRADE PN6

63 mm PE100 GRADE PN6

75 mm PE100 GRADE PN6

90 mm PE100 GRADE PN6

110 mm PE100 GRADE PN6

40 mm PE100 GRADE PN8

50 mm PE100 GRADE PN8

63 mm PE100 GRADE PN8

75 mm PE100 GRADE PN8

90 mm PE100 GRADE PN8

110 mm PE100 GRADE PN8

32 mm PE100 GRADE PN10

40 mm PE100 GRADE PN10

50 mmPE100 GRADE PN10

63 mm PE100 GRADE PN10

75 mm PE100 GRADE PN10

90 mm PE100 GRADE PN10

110 mm PE100 GRADE PN10

Making of micro tunnel by machine and drawing of HDPE pipe / duct through it, as directed and specified by the deptt.

Making of trench for drawing of HDPE pipe / duct on it and refilling the same after drawing of HDPE pipe / duct, as directed and specified by the deptt.

Drawing of cable through HDPE pipe / duct, cable trench, cable tray as directed and specified by the deptt.

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED WEATHERPROOF (CBW) Size: 8 - 10, 3/4 "

FLAMEPROOF (CBF) Size: 8 - 10, 3/4 "

WEATHERPROOF (CBW) Size: 1Size: 2.5 - 16, 3/4 "

FLAMEPROOF (CBF) Size: 1Size: 2.5 - 16, 3/4 "

WEATHERPROOF (CBW) Size: 16.5 - 18, 3/4 "

FLAMEPROOF (CBF) Size: 1Size: 2.5 - 16, 3/4 "

WEATHERPROOF (CBW) Size: 16.5 - 18, 1 "

FLAMEPROOF (CBF) Size: 1Size: 2.5 - 16, 1 "

WEATHERPROOF (CBW) Size: 18.5 - 20, 1 "

FLAMEPROOF (CBF) Size: 18.5 - 20, 1 "

WEATHERPROOF (CBW) Size: 20.5 - 23, 1 "

FLAMEPROOF (CBF) Size: 20.5 - 23, 1 "

WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 "

FLAMEPROOF (CBF) Size: 23.5 - 26, 1- 1/4 "

WEATHERPROOF (CBW) Size: 26.5 - 30, 1- 1/2 "

FLAMEPROOF (CBF) Size: 26.5 - 30, 1- 1/2 "

WEATHERPROOF (CBW) Size: 30.5 - 33, 1- 1/2 "

FLAMEPROOF (CBF) Size: 30.5 - 33, 1- 1/2 "

WEATHERPROOF (CBW) Size: 33.5 - 37, 1- 1/2 "

FLAMEPROOF (CBF) Size: 33.5 - 37, 1- 1/2 "

WEATHERPROOF (CBW) Size: 37.5 - 41, 2 "

FLAMEPROOF (CBF) Size: 37.5 - 41, 2 "

WEATHERPROOF (CBW) Size: 41.5 - 46, 2 "

FLAMEPROOF (CBF) Size: 41.5 - 46, 2 "

WEATHERPROOF (CBW) Size: 46.5 - 52, 2 "

FLAMEPROOF (CBF) Size: 46.5 - 52, 2 "

WEATHERPROOF (CBW) Size: 5Size: 2.5 - 56, 2 -1/2 "

FLAMEPROOF (CBF) Size: 5Size: 2.5 - 56, 2 -1/2 "

WEATHERPROOF (CBW) Size: 56.5 - 60, 2 -1/2 "

FLAMEPROOF (CBF) Size: 56.5 - 60, 2 -1/2 "

WEATHERPROOF (CBW) Size: 60.5 - 66, 3 "

FLAMEPROOF (CBF) Size: 60.5 - 66, 3 "

WEATHERPROOF (CBW) Size: 66.5 - 72, 3 "

FLAMEPROOF (CBF) Size: 66.5 - 72, 3 "

WEATHERPROOF (CBW) Size: 7Size: 2.5 - 78, 3- 1/4 "

FLAMEPROOF (CBF) Size: 7Size: 2.5 - 78, 3- 1/4 "

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY SINGLE compression BRASS GLAND HEAVY DUTY Size: 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 5/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 7/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 1/8"

SINGLE compression BRASS GLAND HEAVY DUTY 1-1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -3/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3 - 1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3 - 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 4 - 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 5/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 7/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 1/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1-1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -3/8"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 -1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 1 - 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 1/2"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 2 - 3/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 3 - 1/4"

SINGLE compression BRASS GLAND HEAVY DUTY Size: 4 "

SINGLE compression BRASS GLAND HEAVY DUTY Size: 4 - 1/2"

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) copper tube terminal heavy duty BIS 4579 Copper tube terminal heavy duty BIS 4579 Size: 1.5 - 5

Copper tube terminal heavy duty BIS 4580 Size: 1.5 - 6

Copper tube terminal heavy duty BIS 4581 Size: 2.5

Copper tube terminal heavy duty BIS 4582 Size: 4

Copper tube terminal heavy duty BIS 4583 Size: 6

Copper tube terminal heavy duty BIS 4584 Size: 10

Copper tube terminal heavy duty BIS 4585 Size: 16

Copper tube terminal heavy duty BIS 4586 Size: 20

Copper tube terminal heavy duty BIS 4587 Size: 25

Copper tube terminal heavy duty BIS 4588 Size: 35

Copper tube terminal heavy duty BIS 4589 Size: 50

Copper tube terminal heavy duty BIS 4590 Size: 70

Copper tube terminal heavy duty BIS 4591 Size: 95

Copper tube terminal heavy duty BIS 4592 Size: 120

Copper tube terminal heavy duty BIS 4593 Size: 150

Copper tube terminal heavy duty BIS 4594 Size: 185

Copper tube terminal heavy duty BIS 4595 Size: 240

Copper tube terminal heavy duty BIS 4596 Size: 300

Copper tube terminal heavy duty BIS 4597 Size: 400

Copper tube terminal heavy duty BIS 4598 Size: 500

Copper tube terminal heavy duty BIS 4599 Size: 550

Copper tube terminal heavy duty BIS 4600 Size: 630

Copper tube terminal heavy duty BIS 4601 Size: 800

Copper tube terminal heavy duty BIS 4602 Size: 1000

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) Copper REDUCER terminal. Copper REDUCER terminal. Size: 2.5

Copper REDUCER terminal. Size: 4

Copper REDUCER terminal. Size: 6

Copper REDUCER terminal. Size: 10

Copper REDUCER terminal. Size: 16

Copper REDUCER terminal. Size: 20

Copper REDUCER terminal. Size: 25

Copper REDUCER terminal. Size: 35

Copper REDUCER terminal. Size: 50

Copper REDUCER terminal. Size: 70

Copper REDUCER terminal. Size: 95

Copper REDUCER terminal. Size: 120

Copper REDUCER terminal. Size: 150

Copper REDUCER terminal. Size: 185

Copper REDUCER terminal. Size: 240

Copper REDUCER terminal. Size: 300

Copper REDUCER terminal. Size: 400

Copper REDUCER terminal. Size: 500

Copper REDUCER terminal. Size: 630

Copper REDUCER terminal. Size: 800

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM tube terminal. ALUMINIUM tube terminal. Size: 2.5

ALUMINIUM tube terminal. Size: 4

ALUMINIUM tube terminal. Size: 6

ALUMINIUM tube terminal. Size: 10

ALUMINIUM tube terminal. Size: 16

ALUMINIUM tube terminal. Size: 20

ALUMINIUM tube terminal. Size: 25

ALUMINIUM tube terminal. Size: 35

ALUMINIUM tube terminal. Size: 50

ALUMINIUM tube terminal. Size: 70

ALUMINIUM tube terminal. Size: 95

ALUMINIUM tube terminal. Size: 120

ALUMINIUM tube terminal. Size: 150

ALUMINIUM tube terminal. Size: 180

ALUMINIUM tube terminal. Size: 240

ALUMINIUM tube terminal. Size: 300

ALUMINIUM tube terminal. Size: 400

ALUMINIUM tube terminal. Size: 500

ALUMINIUM tube terminal. Size: 550

ALUMINIUM tube terminal. Size: 630

ALUMINIUM tube terminal. Size: 800

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM REDUCER terminal. Size: ALUMINIUM REDUCER terminal. Size: 2.5

ALUMINIUM REDUCER terminal. Size: 4

ALUMINIUM REDUCER terminal. Size: 6

ALUMINIUM REDUCER terminal. Size: 10

ALUMINIUM REDUCER terminal. Size: 16

ALUMINIUM REDUCER terminal. Size: 20

ALUMINIUM REDUCER terminal. Size: 25

ALUMINIUM REDUCER terminal. Size: 35

ALUMINIUM REDUCER terminal. Size: 50

ALUMINIUM REDUCER terminal. Size: 70

ALUMINIUM REDUCER terminal. Size: 95

ALUMINIUM REDUCER terminal. Size: 120

ALUMINIUM REDUCER terminal. Size: 150

ALUMINIUM REDUCER terminal. Size: 185

ALUMINIUM REDUCER terminal. Size: 240

ALUMINIUM REDUCER terminal. Size: 300

ALUMINIUM REDUCER terminal. Size: 400

ALUMINIUM REDUCER terminal. Size: 500

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM inline connection as approved by the Deptt.tor. Size: ALUMINIUM inline connection as approved by the Deptt.tor. Size: 25

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 35

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 50

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 70

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 95

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 120

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 150

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 185

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 240

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 300

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 400

ALUMINIUM inline connection as approved by the Deptt.tor. Size: 500

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM alloy tubular bimetallic terminal. Size: ALUMINIUM alloy tubular bimetallic terminal. Size: 10

ALUMINIUM alloy tubular bimetallic terminal. Size: 16

ALUMINIUM alloy tubular bimetallic terminal. Size: 20

ALUMINIUM alloy tubular bimetallic terminal. Size: 25

ALUMINIUM alloy tubular bimetallic terminal. Size: 35

ALUMINIUM alloy tubular bimetallic terminal. Size: 50

ALUMINIUM alloy tubular bimetallic terminal. Size: 70

ALUMINIUM alloy tubular bimetallic terminal. Size: 95

ALUMINIUM alloy tubular bimetallic terminal. Size: 120

ALUMINIUM alloy tubular bimetallic terminal. Size: 150

ALUMINIUM alloy tubular bimetallic terminal. Size: 185

ALUMINIUM alloy tubular bimetallic terminal. Size: 240

ALUMINIUM alloy tubular bimetallic terminal. Size: 300

ALUMINIUM alloy tubular bimetallic terminal. Size: 400

ALUMINIUM alloy tubular bimetallic terminal. Size: 500

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray 50

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Bend 50

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Inter/Exter 50

Inter/Exter 76

Inter/Exter 101

Inter/Exter 152

Inter/Exter 203

Inter/Exter 228

Inter/Exter 304

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Tee 50

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). 4 Way 50

Perforated MT 38 mm SIDE WALL HEIGHT MEDIUM DUTY cable TRAYS HOT DIP GALVANIZED WITH SPLICE Size of Tray 76

Perforated MT 38 mm SIDE WALL HEIGHT MEDIUM DUTY cable TRAYS HOT DIP GALVANIZED WITH SPLICE Bend 76

Perforated MT 38 mm SIDE WALL HEIGHT MEDIUM DUTY cable TRAYS HOT DIP GALVANIZED WITH SPLICE Inter/Exter Bend 76

Inter/Exter Bend 114

Inter/Exter Bend 152

Inter/Exter Bend 228

Inter/Exter Bend 304

Perforated MT 38 mm SIDE WALL HEIGHT MEDIUM DUTY cable TRAYS HOT DIP GALVANIZED WITH SPLICE Tee 76

CONDENSER SET COPRISES OF 2X CANTILEVER ARMS,2X 300mm CHANNELS , 2X 10mm HOLES PRE PUNCHED, 4X M10 SPRING NUT, 4 X M 10X 30 HEX SET SCREW Size 450mm

Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor trunking including necessary nuts and bolts, washer etc. as required, as directed and specified by the department. (MK/ LEGRAND make) Size 50X25X1.6/1 compartment

75X25X1.6/1 compartment

100X25X1.6/1 compartment

225X25X1.6/3 compartment

250X25X1.6/3 compartment

300X25X1.6/3 compartment

50X38X1.6/1 compartment

75X38X1.6/1 compartment

100X38X1.6/1 compartment

150X38X1.6/2 compartment

225X38X1.6/3 compartment

250X38X1.6/3 compartment

300X38X1.6/3 compartment

Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor trunking including necessary nuts and bolts, washer etc. as required, as directed and specified by the department. (MK/ LEGRAND make) Size JOINT SLEEVE 50/1/ 6 FOR 25mm

50/1/ 6 FOR 38mm

75/1/ 6 FOR 25mm

75/1/ 6 FOR 38mm

100/1/ 6 FOR 25mm

100/1/ 6 FOR 38mm

150/2/ 6 FOR 38mm

225/3/ 6 FOR 25mm

225/3/ 6 FOR 38mm

250/3/ 6 FOR 25mm

250/3/ 6 FOR 38mm

300/3/ 6 FOR 25mm

300/3/ 6 FOR 38mm

Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor trunking including necessary nuts and bolts, washer etc. as required, as directed and specified by the department. (MK/ LEGRAND make) Size Access point 250x250x60 - 75mm 3 compartments

300x300x60 - 75mm 3 compartments

vertical access box 250x200x50 mm 2 compartments

vertical access box 300x200x50 mm 2 compartments

Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor trunking including necessary nuts and bolts, washer etc. as required, as directed and specified by the department. (MK/ LEGRAND make) Size Cross over/Junction box Cross over 250x250x60 - 75 mm 3 compartments

Cross over 300x300x60 - 75 mm 3 compartments

Cross over 350x350x60 - 75 mm 3 compartments

Cross over 400x400x60 - 75 mm 3 compartments

Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor trunking including necessary nuts and bolts, washer etc. as required, as directed and specified by the department. (MK/ LEGRAND make) Size JUNCTION BOX 150x150x60 - 75 mm Depth

250x250x60 - 75 mm Depth

300x300x60 - 75 mm Depth

350x350x60 - 75 mm Depth

400x400x60 - 75 mm Depth

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 10.00 & 16.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 25.00 & 35.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 95.00 & 120.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 185.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 300.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 & 70.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 95.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 225.00 & 240.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 300.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 400.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 70.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 120.00 & 150.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 150.00 & 185.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 225.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type 1.1 KV PVC/XLPE/PILC cable Straight through Jointing Kits (MS - SE AL make) including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 240.00 Sq.mm., 3.5 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV PILC cable (MS - SE For the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00,70.00 & 95.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV PILC cable (MS - SE For the following sizes including testing and commissioning as specified and directed by the Deptt. 120.00,150.00 & 185.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV PILC cable (MS - SE For the following sizes including testing and commissioning as specified and directed by the Deptt. 240.00 & 300.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV XLPE cable for the following sizes including testing and commissioning as specified and directed by the Deptt. 400.00 & 500.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV PILC cable (MS - SE For the following sizes including testing and commissioning as specified and directed by the Deptt. 16.00,25.00 & 35.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV XLPE cable for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00,70.00 & 95.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV XLPE cable for the following sizes including testing and commissioning as specified and directed by the Deptt. 120.00,150.00 & 185.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV XLPE cable for the following sizes including testing and commissioning as specified and directed by the Deptt. 240.00 & 300.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV XLPE cable for the following sizes including testing and commissioning as specified and directed by the Deptt. 16.00,25.00 & 35.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of Resin Cast type outdoor end cable Termination Kit for 3 Core/1.1 KV PILC cable (MS - SE For the following sizes including testing and commissioning as specified and directed by the Deptt. 400.00 & 500.00 Sq.mm., 3 Core cable.

Supply including fitting and fixing of 1.1 KV PVC/XLPE cable Straight through Jointing Kits RAYCHEM RPG TUBULAR SLEEVE VERSION including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 1.5 - 6.00 Sq.mm., 3/3.5/4 Core cable.

10.00 -16.00 Sq.mm., 3/3.5/4 Core cable.

25-50.00 Sq.mm., 3/3.5/4 Core cable.

70-150 Sq.mm., 3/3.5/4 Core cable.

185 - 300 Sq.mm., 3/3.5/4 Core cable.

400 Sq.mm., 3/3.5/4 Core cable.

500.00 Sq.mm., 3/3.5/ 4 Core cable.

1.5 - 6.00 Sq.mm., 2 Core cable.

10.00 -16.00 Sq.mm., 2 Core cable.

25-50.00 Sq.mm., 2 Core cable.

70-150 Sq.mm., 2 Core cable.

185 - 300 Sq.mm., 2 Core cable.

400 Sq.mm., 2 Core cable.

500.00 Sq.mm., 2 Core cable.

25 - 50 Sq.mm., 1 Core cable.

For 70-150 Sq.mm., 1 Core cable.

185 - 300 Sq.mm., 1 Core cable.

400 Sq.mm., 1 Core cable.

Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 10.00 - 16.00 Sq.mm., 3/ 3.5/ 4 Core cable.

25.00 -50.00 Sq.mm., 3/ 3.5/ 4 Core cable.

70.00 - 150.00 Sq.mm., 3/ 3.5/ 4 Core cable.

185-300 Sq.mm., 3/ 3.5/ 4 Core cable.

400 Sq.mm., 3/ 3.5/ 4 Core cable.

500-630 Sq.mm., 3/ 3.5/ 4 Core cable.

25.00 -50.00 Sq.mm., 1 Core cable.

70.00 - 150.00 Sq.mm., 1 Core cable.

185-300 Sq.mm.,1 Core cable.

400 Sq.mm., 1 Core cable.

500-630 Sq.mm., 1 Core cable.

800.00 Sq.mm., 1 Core cable.

1000.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of 1.1 KV PVC/XLPE control cable 1.5 - 2.5 sq mm Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 4 to 7 core

8 to 14 core

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type single core HT cable indoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., 1 Core cable.

120.00 to 240.00 Sq.mm., 1 Core cable.

300.00 to 500.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type single core HT cable outdoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., 1 Core cable.

120.00 to 240.00 Sq.mm., 1 Core cable.

300.00 to 500.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type single core HT cable straight through jointing kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 70.00 to 120.00 Sq.mm., 1 Core cable.

150.00 to 185.00 Sq.mm., 1 Core cable.

240.00 to 300.00 Sq.mm., 1 Core cable.

400.00 to 500.00 Sq.mm., 1 Core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type three core HT cable indoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., three core cable.

120.00 to 185.00 Sq.mm., three core cable.

240.00 to 300.00 Sq.mm., three core cable.

400.00 Sq.mm., three core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type three core HT cable outdoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., three core cable.

120.00 to 185.00 Sq.mm., three core cable.

240.00 to 300.00 Sq.mm., three core cable.

400.00 Sq.mm., three core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type three core HT cable straight through jointing kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., three core cable.

120.00 to 185.00 Sq.mm., three core cable.

240.00 to 400.00 Sq.mm., three core cable.

Supply including fitting and fixing of outdoor cable Junction Boxes IP 66 halogen free and weather proof for outdoor installation ( with metric knockouts for cable entry) on existing pole with clamp nut &bolts, including all accessories complete as specified and directed by the Deptt. cable size 2.5 sq.mm box size 88 x 88 x 53 all in mm

cable size4 sq.mm box size 98 x 98 x 61 all in mm

cable size 6 sq.mm box size 139 x 119 x 70 all in mm

cable size 10 sq.mm box size 167 x 125 x 82 all in mm

cable size 16/25 sq.mm box size 200 x160 x 98 all in mm

Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquar make) including necessary connection etc. as required complete and as directed by the Department. 25 Litre Capacity (Digital Model)

35 Litre Capacity (Digital Model)

Supplying including installation, connection as approved by the Deptt., testing and commissioning of JET PUMP SET (HORIZONTAL) complete as directed and specified by the deptt. 1 HP single Phase jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

1.5 HP Single Phase Motor jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying including installation, connection as approved by the Deptt., testing and commissioning of JET MONOBLOCK PUMP SET complete as directed and specified by the deptt. 2 HP single Phase jet monoblock two stage pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt. 0.5 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

2 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm A class insulation with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

3 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm A class insulation with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.5 TO 10 HP, 0.72 TO 20 A.

Fully Automatic citation Star delta Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) for 2.4 - 13.5 A 3 to 15 HP motor.

Fully Automatic citation Star delta Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) for 13 - 20 A 3 to 15 HP motor.

Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following capacity as specified and directed by the Department. (Texmo/ Crompton Greaves/ CRI/ Aqua sub make) Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.75HP/ 1HP

Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)1.5HP

Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)2 HP

Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)3 HP

Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)3 HP

MCB controlled Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)

Supplying fitting, fixing, testing and commissioning of following capacity motor (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) complete with necessary connection as approved, specified and directed by the Department 0.5 HP single phase 1420 rpm

1 HP single phase 1420 rpm

1.5 HP single phase 1420 rpm

2 HP single phase 1420 rpm

3 HP three phase 1440 rpm

3 HP three phase 960 rpm

Supplying including installation, testing and commissioning of Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KVA) Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer alternator. KVA- PHASE- Approx size- Approx Wt - COOLING 30- 1- 3130x1100x1680- 1440 Kg -A/C

Supplying installation, testing, programming and commissioning of Audio equipment, 4‐Channel Power Amplifier, 75 W per channel @ 8 ohms

Sri Sudhang Kr Brahma