SPECIAL REPAIRS TO BLDG NO 508 AND CERTAIN SANCTIONED WORKS UNDER AREA OF AGE B/R II AT AF STATION ADAMPUR.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and remove rubbish off the premises all as specified and directeded by Engineer -In-Charge

M & L for dark shade , Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and inluding 15mm thick cement screed bed or bedding layer in CM 1:4 etc complete all as specified and directed by Engineer -In-Charge

M & L for Vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in matching coloured polymer cement based grout to match light shade laid over and including 15mm thick cement screed bed or bedding layer in CM 1:4 etc complete all as specified and directed by Engineer -In-Charge.

M&L 9mm to 10m thick joint less vitrified tiles Ditto as per item no 03 but in Dado/Skirting laid over and including 10mm CM 1:4 thick rendeing complete all as specified and directed by Engineer -In-Charge

Dimantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and directed by Engineer -In-Charge

Taking down,Chowkhats or frames not exc. 1.5 sq. m each, but with shutters (without taking off shutters from the frames),etc complete all as specified and directed by Engineer -In-Charge

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm.complete all as specified and directed by Engineer -In-Charge

Taking down cement plaster any description on brick or stone walls, roof plater etc including raking out joints,hacking for key, scrubbing down with water etc.complete all as specified and directed by Engineer -In-Charge

M&L for 15mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement).complete all as specified and directed by Engineer -In-Charge

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed by Engineer -In-Charge.

Taking down rainwater, Soil waste and vent pipes (any size or pattern), including all fittings, & removed from site complete all as specified and directed by Engineer -In-Charge.

S & F for PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe 110 mm, etc complete all as specified and directed by Engineer -In-Charge

S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints, fixed to wall or laid in trenches, complete all as specified and directed by Engineer -In-Charge

S & F PVC( SWR ) bends 110mm dia in repair complete all as specified and directed by Engineer -In-Charge.

S & F Aluminium protectective self adhesive bituminous strip 1.5mm thick and 100 mm wide for water proofing to roof joint of galvalum sheet roofs,light domes,glass roofs, emergency sealing and delevery covering joints in roof gutters etc.as approved by GE,and application methodology by as per manufacturer's instructions(Super flash strip of STP or equivalent).complete all as specified and directed by Engineer -In-Charge

Supply only bituminous chaulking compound with mineral fillers in a Volatile solvent use for expansion,contraction,cracks/gaps or around holding hooks/ bolts in roofs etc. applying as per manufacturer"s instructions.(Tarplastic of STP or equivalent).complete all as specified and directed by Engineer -In-Charge

M & L preparation of plastered or unplastered by washing, rubbing down and stopping of distempered and painted surface complete removal of existing treatment etc and applying two coat of OBD walls to obtain uniform surfaces including making good the surface .complete all as specified and directed by Engineer -In-Charge

S&F 600X600mmX4mm Ceiling HPSC (high pressure steam Cured) pre laminated self embossed textured designer board E board classic fixed to GI snap grid frame powder coated with main runner 38X24X0.9mm thick and cross tee 28.6X24X0.9mm and wall angle 19X19X0.9 mm complete all including suspenders/ fastener 600mm c/c complete all as specified and directed by Engineer -In-Charge

Fixing only GI / Anodised aluminium snap grid frame work for false ceiling all as specified, etc complete, as specified and directed.complete all as specified and directed by Engineer -In-Charge

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc.complete all as specified and directed by Engineer -In-Charge

M & L Brick work built in cement mortar 1:6 with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed by Engineer -In-Charge

S & F for Anodised aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed by Engineer -In-Charge

S & F for Anodised aluminium powder coating door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,mortise lock, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc.complete all as specified and directed by Engineer -In-Charge

S & F for Anodised aluminium powder coating window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and directed by Engineer -In-Charge

M&L for 5.5 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, etc complete all as specified and directed by Engineer -In-Charge

M & L for 9 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, etc complete all as specified and directed by Engineer -In-Charge

S&F Aluminium Gril suitable for aluminium Window complete all as specified & directed by Engineer -In-Charge

S & F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed,etc complete all as specified and directed by Engineer -In-Charge

M & L applying two coats of cement based paint on old plasterd wall surface including preparation of surfaces complete all as specified and directed by Engineer -In-Charge

S & F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm,etc complete all as specified and directed by Engineer -In-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness and removing from site complete all as specified and directed by Engineer -In-Charge

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer -In-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed by Engineer -In-Charge

M&L Precast cement concrete 1:2:4, type B1, using 20mm graded crushed stone aggregate as in manhole and drain cover including necessary form work, placing the cover on drain or manhole complete all as specified and directed by Engineer -In-Charge

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer -In-Charge

S&F factory made PVC cabinet of required size 450mm depth fabricated by joining four 18mm thick PVC celuka ply fixed with each other using solvent cement adhesive and scew and 18mm thick PVC sheet as backing of cabinet fixed with solvent and screw including shutter, the shutter should made out of 18 mm thick PVC sheet one side pre lam sheet kitchen cabnet shutter, the 18mm thick sheet shutter bend at 90 degree and finish all edges at level for making edges lipping/ bending 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc complete including megnate catch lock, hinge, hasp,and staple as per direction of Engneer in Charge or manufacturers instruction.complete all as specified and directed by Engineer -In-Charge.

S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ref para 8-B.2, 8B.2.1 on page No 143 of SSR 2010 Part II and drawing shown on Page 156 of SSR 2010 part II etc complete all as specified and directed by Engineer -In-Charge

S & F Factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suplying & fixing in opening as per specification in SSR part-II 2010 Section-8,Clause 8B.3.2 on page No 145 and shown on & drawing,in page No 160 of SSR part-II 2010.complete all as specified and directed by Engineer -In-Charge

Factory made PVC shelf of 22mm thickness consisting of panel of hollow PVC profile of 12 mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mm X 12 mm inserted all around the hollow profile section and insert one 12 mm X 12 mm MS tube in the center of this section and lipped with 10mm (5mmX2) th and 12 mm wide on stiles and rails using solvent cement.The inner panelshallbe laminated with 5mm th termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel .The front side of the partition visible in the front of the cupboard to be edge bonded using 20mmX 1mm th plain PVC leeping on the both edge etc.complete all as specified and directed by Engineer -In-Charge.

S & F 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed,complete all as specified and directed by Engineer -In-Charge

S & F Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws,Size of hasp and staple 100 mm, complete all as specified and directed by Engineer -In-Charge

S & F for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, etccomplete all as specified and directed by Engineer -In-Charge.

S & F100mm long aluminium anodised,handle D type all as specified and directed.complete all as specified and directed by Engineer -In-Charge

Supply and Fixed, Convex Mirror 600mm dia, Polycarbonate reflected, outdoor type with hood ABS body including stand for fixing mirror, duty embeded in PCC 1:2:4 type B1 block of suitable size to bear self load and wind pressure complete all as per manufacturer's instructions, and directed. Make:- DARK EYE model : DA 110 (DHRUV) or equivalent in Tata BP Solar/ 3m.complete all as specified and directed by Engineer -In-Charge

S&F plastic speed breaker 1000mm (4 piece 350X20mm) make Alexis code No 1409 or eququlant in make TATA BP SOLAR/ DARK EYE complete all as specified and directed by Engineer -In-Charge by Engr in Charge.

Excavating in trenches, not exceding 1.5 m wide and not exceding 1.5 m in depth; for foundation, and getting out in soft /loose soil complete all as specified and directed by Engineer -In-Charge

M & L Cement concrete type B-2 1:2:4 using 40 mm graded aggregatein foundations, filling and mass concrete complete all as specified and directed by Engineer -In-Charge

S& F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wiremesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer -In-Charge

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates, Fe 410-W (Gde-E-250) quality-A,etc complete all as spd and directed.

S & F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and directed by Engineer -In-Charge

M&L two coat of synthetic enamel paint on new steel surface of any description and postion including preparation of surface and one coat of road oxide primer exe 10cm in width and girth. complete all as specified and directed by Engineer -In-Charge

Cutting existing steel tubing for alterations or additions (Each cut measured), Bore of pipes in 15mm, etc complete all as specified and directed by Engineer -In-Charge

M & L for GI pipe 15 mm, ''medium grade'' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed by Engineer -In-Charge

Supply and fixing of bib tap brass CP 15mm bore fancy type, chromium plated complete all as specified and directed by Engineer -In-Charge

Renewing tiles of any discription in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles, etc complete all as specified and directed by Engineer -In-Charge

Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required etc.complete all as specified and directed by Engineer -In-Charge

S&F steel plate rack made of stainless steel 1mm thick over all size 600mm X750mm complete all as specified and directed by Engineer -In-Charge by Engr in charge.

S&F Wash basins, Vitreous China (flat back or angle back type) any size550X440mm , including cutting for and pinning in ends of brackets or erecting stand but including fixing of waste coupling and waste pipe , etc complete all as specified and directed by Engineer -In-Charge

S&F sink with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and waste including beding in cement mortar to dwarf wall or including fixing cantilever brakets and connecting union to pipe, waste coupling and waste pipe overall size 915mm X460mm, bowl size 410X 330m X160mm etc complete all as specified and directed by Engineer -In-Charge

S & F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms), complete all as specified and directed by Engineer -In-Charge

S & F 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), etc complete all as specified and directed by Engineer -In-Charge.

S & F for Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), etc complete all as specified and directed by Engineer -In-Charge.

S & F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms), etc complete all as specified and directed by Engineer -In-Charge.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer -In-Charge

S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, including GI fixing etc complete all as specified and directed by Engineer -In-Charge

S&F 75mm dia PVC (SWR) bend any radius complete all as specified and directed by Engineer -In-Charge

M & L Cement concrete type D-2, 1:4:8 using 40 mm graded aggregatein foundations, filling and mass concrete complete all as specified and directed by Engineer -In-Charge

S&F MS (square/ Rectanagular hollow section) for roof trusses Fe-410 W(Gd-E-250) quality A (framed), trussed, purlins crane ganties rails and fastenings and heavy bracket framing (Beam,tee,angle,channel or flat section ) including distance pieces cleats etc .complete all as specified and directed by Engineer -In-Charge

Taking down shutters of any description exc 2.00sqm.complete all as specified and directed by Engineer -In-Charge

M & L Damp proof course 40 mm th. In PCC 1:2:4 type B-0 to horizontal or vertical surface.complete all as specified and directed by Engineer -In-Charge

M&L rendering 15mm thick in CM 1:4 using WPC on fair faces of brick or concrete, external surfaces of walls finished the surface fair complete all as specified and directed by Engineer -In-Charge

supply only integral water proofing compound as per manufacturer instructions.complete all as specified and directed by Engineer -In-Charge.

Excavating in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in exc 50m and making good surface.complete all as specified and directed by Engineer -In-Charge.

M&L Applying two coats of cement paint on newely plasterd wall surface including one coat of alkali resistant priming paint including preperation of wall surface complete all as specified and directed by Engineer -In-Charge.

M&L RCC 1:2:4 type B-1 nominal mix using 20 mm graded aggregate. in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed by Engineer -In-Charge.

Form work to the sides and soffits of floor or roof beam,beam haunchings girders bressmers lintel cantiliver shelves inc support over hang etc also splays between floors and beems flat rough finished surfaces complete all as specified and directed by Engineer -In-Charge

M&L mild steel TMT steel bars 6mm to 8 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required inluding cranking bending hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engineer -In-Charge

M&L 75 mm thick Plain Cement concrete type D-2 (1:4:8) (40mm graded aggregate) as in subbase of floor complete all as specified and directed by Engineer -In-Charge.

M&L 40 mm thickPlain Cement concrete type B-1, 1:2:4 (20 mm graded Aggregate as in floor finish finished even and smooth without using extra cement complete all as specified and directed by Engineer -In-Charge

E/M PORTION Taking down carefully old UNSV copper/aluminium point wiring for ((light, fan,socket or power) complete Including UNSV fitting such as switches, ceiling rose, holders, sockets etc. and making good disturbed surface on wall/floors & ceilling etc complete all as specified and directed by Engineer -In-Charge.

M & L for Concealed point wiring with and including single core, fire retardant, PVC insulated and unsheathed stranded copper conductor cable 1.5 Sqmm 1100 volts grade drawn through and including suitable size PVC Conduit and accessories with 3mm thick laminated top cover fixed on existing MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 Sqmm fire retardent PVC insulated and unsheathed stranded Green colour copper conductor cable as earth wire and connected to common earth duly and making good to the disturbed surfaces of wall , floor, ceilling etc to match with existing surface complete all as directed for the following :- (Note: Surface conduit shall be laid in ceiling portion only and The quoted Rate including for Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. in case of recessed or concealed conduit wiring complete all as Spd). Make : Plaza/Havells/Plycab Note :- Switch, Socket etc Shall be mesured & paid seperately

Light/fan/Exhaust&Wall mounted fan/mirror light point controlled by one 5 Amp switch .

Bell point controlled by one 5 Amp switch

One 5 pin 5 Amps switch socket out let on same board

One 5 pin 5 Amps switch socket out let on independent board

One light point controlled by two 2- way switches, with cables 1.5 sq. mm size

M & L for Concealed point wiring with and including single core, fire retardant, PVC insulated and unsheathed stranded copper conductor cable 2.5 Sqmm 1100 volts grade drawn through and including suitable size PVC Conduit and accessories with 2.8mm thick laminated top cover fixed on existing MS sunken box for housing of switch, socket, etc complete with and including 2.5 Sqmm fire retardent PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth duly and making good to the disturbed surfaces of wall , floor, ceilling etc to match with existing surface complete all as directed. (Note: The quoted Rate including for Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. in case of recessed or concealed conduit wiring all as complete). Make : Plaza/Havells/Plycab.

One light point or one fan point controlled by one switch

One 3 Pin 15 Amps switch socket outlet power point

S&F Switch piano 5 Amps SP one way 230 volts flush type. complete all as specified and directed by Engineer -In-Charge

S&F Switch piano 5 Amps SP 2- way 230 volts flush type. complete all as specified and directed by Engineer -In-Charge

S&F Bell push AC, 230 volt, 5 Amp, flush type.complete all as specified and directed by Engineer -In-Charge.

S&F ceiling rose, surface bakelite, three terminals AC 230 volts.complete all as specified and directed by Engineer -In-Charge .

S&F lamp holder, insulated body, with back plate for batten fittings fixed on wall/ceiling complete all as specified and directed by Engineer -In-Charge.

S&F switch socket combination 5 Amps, 5 pin multipurpose flush type, 230 volts.complete all as specified and directed by Engineer -In-Charge

S&F switch socket combination 15 Amps, 6 pin multipurpose flush type, 230 volts.complete all as specified and directed by Engineer -In-Charge.

S&F ceiling fan regulator AC, 230 volts, 450 watts electronic stepped type.complete all as specified and directed by Engineer -In-Charge

S&F Electric call bell AC 230 V single pole type. complete all as specified and directed by Engineer -In-Charge

S&F sheet metal enclosure MCB DB SPN 4 way single pole & neutral with 200 Amps rated bus bar 240 volt.complete all as specified and directed by Engineer -In-Charge

All as per item No 93 here-in-before but 8 way

S&F MCB SPN 40 to 63 Amps ruptering cap 415 V.complete all as specified and directed by Engineer -In-Charge

S&F in repair MCB SP 6 to 40 Amps 240 volts, 50Hz, 10 KA rupturing capacity complete connection and testing complete.

S&F sheet metal enclouser with two pin and earth plug socket and MCB SP 20 Amp. ccomplete all as specified and directed by Engineer -In-Charge

Supply, Fixing & connecting from existing ceiling rose with 3 core flexible copper wire of reqd length, 2x2 LED 42W recess mounting square LED Luminaries PMMA extruded diffuser giving glare free light and good aesthetic appeal all as directed. Make. Havells Cat No :VENUSNEOHE2X2PLR42WLED8XXS equivallent make of CG/Philips/Bajaj.

Supply, Fixing & connecting from existing ceiling rose with 3 core flexible copper wire of reqd length, 1'x1' LED 15W recess mounting square LED Luminaries PMMA extruded diffuser giving glare free light and good aesthetic appeal all as directed. Make. Havells Cat No :VENUSNEOHE2X2PLR42WLED8XXS or equivallent make of CG/Philips/Bajaj.

S& F Surface and wall mounted LED Batten with polycarbonate housing and integrated electronic Driver 1x 20 W complete including connector block etc and all accessories prewired and connection with three core copper fixiable cable 16/0.20 mm from ceiling rose to fitting complete all as specified and directed by Engineer -In-Charge. Make: HAVELLS, Cat part .LUMILINEBS20WLED865SPCWH/or equivallent make of CG/PHILIPS/BAJAJ

M&L for Submain wiring complete with and including 4 sq mm single core PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through in 2 including pvc conduit dia 25mm dia and including accessories and fixed on walls and 4 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing wiringcomplete all as specified and directed by Engineer -In-Charge.

M & L for Submain wiring complete with and including 2 x 6 sq mm single core PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through and including PVC conduit 25mm accessories and fixed on walls and 1x 6 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing wiring complete all as specified and directed by Engineer -In-Charge.

M & L for Submain wiring complete with and including 2x10 sqmm single core PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through and including Pre conduit 25mm accessories and fixed on walls and 1x10 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing wiring complete all as specified and directed by Engineer -In-Charge.

M & L for Submain wiring complete with and including 2x6 Sqmm single core PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through and including Pre conduit 25mm accessories and fixed on walls and 1x6 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing wiring complete all as specified and directed by Engineer -In-Charge.

M&L MS sunken box of size 100x100mm 1.6 mm thick with 3mm thick laminated cover complete with and including making good to disturbed surface of wall complete all as specified and directed by Engineer -In-Charge.

M&L MS sunken box of size 175x100mm, 1.6mm thick with 3mm thick laminated cover complete with and including making good to disturbed surface of wall complete all as specified and directed by Engineer -In-Charge.

M & L for Submain wiring complete with and including 4x10 sqmm single core PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through and including Pre conduit 25mm accessories and fixed on walls and 2x10 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing wiring complete all as specified and directed by Engineer -In-Charge.

M&L MS sunken box of size 200x250mm, 1.6mm thick with 3mm thick laminated cover complete with and including making good to disturbed surface of wall complete all as specified and directed by Engineer -In-Charge.

M&L MS sunken box of size 200x300 mm,1.6 mm thick with 3 mm thick laminated cover complete with and including making good to disturbed surface of wall complete all as specified and directed by Engineer -In-Charge.

M&L for pointing wiring with 4 Sqmm (Nominal area) PVC insulated, Per point unsheathed, multistrand, 1100 Volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit and its accessories including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6mm thick MS terminal box finished to wall with 3mm thick laminated hylam sheet top cover all as specified for :- Make plaza/havells /polycab

S&F Switch piano , flush type single pole , one way 15 Amps. Make :- Plaza/Fine/Anchor

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type Make :- Plaza/Fine/Anchor

S&F socket outlet 2 in 1, 3 pin, 5 Amps flush type Make :- Plaza/Fine/Anchor

S&F Endura linear NEO LED batten 18 watt 4000k wall mounted , extruded aluminium heat sink rovided for sufficient heat dissipation and integrated electronic driver complete including connection fromceiling rose to light fitting with twin core scale 23/0.0076 Sqmm complete all as specified and directed by Engineer -In-Charge. .Make: Havells cat pt No LHEXBQPINW018, or eqvt in CG/C&S

Supply and fix pluto Neo Panel 2'X2' recess mounting square LED luminairies 42 Watt White powder coated CRCA sheet steel housing with high power LED's mounted . Plane front frame with translucent cover fixed to the housing cat part No. LHEWEJP6PL1W042 make : Havells or Eqvt in GE Lightening / Phillips

S&F Sheet metal enclosure (DB) triple pole and neutral 4ways, 415 Volt with 200Aamps rate bus bar. Make : Legrand , (DX3)/SCHEIDER-(ACTI9)/Siemens-Betagard(10 KA)

Load Line TPN vertical distribution board 8 way double door dust protected powder coated inclusive of busbar neutral link blanking and comprising of following incoming (i) MCCB TP 160 Amps 25 KA -01 Nos, Legrand, (DX3)/SCHNEIDER-(ACTI9)/Siemens-Betagard (10KA)/Havells

S&F MCB TPN pole 63 Amps Legrand, (DX3)/SCHNEIDER-(ACTI9)/Siemens-Betagard (10KA)/Havells

S&F MCB SPN 40 Amps Legrand, (DX3)/SCHNEIDER-(ACTI9)/Siemens-Betagard (10KA)/Havells

S&F MCB SP 6-40 Amps 10 KA Make - Havells/Schneider/Legrand

Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by medium grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 3: 6 type C1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR-2009 (Part I) including dismantaling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

M/S GURBACHAN SINGH

AAR KAY BEE ENTERPRISES

M/s Sahib and Company

BHARAT ENTERPRISES