REPAIR TO HARDSTANDING, INTERLOCKING, PLINTH PAVEMENTS AND OTHER B/R ITEMS AND REPAIR MAINT OF ALUMINIUM JOINERY, VARIOUS PARKING SHEDS AND REPAIR TO INT DRAINS, CLEANING OF SEWAGE LINE, SOAK WELL, SEPTIC TANKS AT ZONE C AT CHCC UNDER GE E/M LUCKNOW

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, exceeding 1.5 m wide and exceeding 1.5 m not exceeding 3.0 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, exceeding 1.5 m wide and exceeding 3 m not exceeding 4.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified and directed.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Excavation in trenches in any type of soil n.exc 1.5 m wide & n.exc 1.5 m deep in any kind of soil: for foundation etc., or for shafts, wells, cesspits, manholes, pier holes,not exceeding 10 sq.m on plan and geeting out complete all as specified and directed. Note : The road/ pavements occured during alignment of sewer lines the cutting portion shall be make good with PCC 1:2:4, type B2,150mm thick over 150mm thick hardcore over rammed earth. The cost PCC and hardcore will be measured and paid separately.

M&L for PCC 1:5:10 type E2 (using 40 mm graded stone agrregate) as in foundation, filling, sunken floor & mass concrete etc finished surface fair and even complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone agrregate) as in foundation, filling & mass conrete, for hard standing etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in drains / surface channel complete all as specified and directed.

EXTRA FOR forming fair finished channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped ends complete all as specified and directed.

ADD/DEDUCT for each 25 mm girth or part thereof over or under 30 cm girth inner girth in cement concrete using extra cement incl forms, moulds mitred / stopped ends etc complete all as specified and directed.

Supply only integral water proofing compound powder ISI marked complete all as specified and directed.

M&L for Providing precast cement concrete with type B0 PCC 1:2:4 (using 12.5 mm graded stone aggregate) set in CM 1:4 louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L 150mm PCC 1:2:4 type B2 using 40mm graded aggregate laid over 150mm thick hardcore of broken boulders of gauge exe 63mm but n exe 100mm deposited, spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface over rammed earth as in road/pavement cutting complete all as specified and directed.

M&L for RCC M-25 Nominal Mix using 20 mm gradded stone aggregate in slabs supported on walls, beams and columns in floor,roof,landing etc complete all as specified and directed.

M&L RCC M30 design mix as in slabs suported on walls,beams and coluumns in floors, roofs, landings, balconies, canopuies, deck slabs and shelves and the like ans coumns fair finished in necessary provision for opening Man hole and precast cover slab, complete all as specified and directed.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and directed.

M&L 18-20 mm thick granite stone slab ( Black colour) , bedded over screed bed and jointed in cement mortar to match the colour of slab as in flooring , polishing and grinding complete all as specified and directed. (Note- Screeding bed shall be measured and paid separately)

M&L Formwork to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work for fair finished surface complete all as specified and directed.

M&L use and waste of form work to soffits os suspended slabs such as roof slabs, floor slabs, landings and similar work; not eceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L use and waste of formwork to faces of walls, retaining walls, aboutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc: vertical or to batter fair finished complete all as specified and directed.

Use and waste of timbering as planking and strutting for excavations in trenches in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal exc 1.5m & n exc.3m, complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, break in floors, window cills, horizental or sloping and similar exc 10cm but not exceeding 20 cm wide for fair finished surface complete all as specified and directed.

S&F 2nd class Hard wood SAL in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed.

M&L 30mm thick 2nd class hard wood (Sheesham) Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed.

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L glazed and skeleton shuitters 30m thick of 2nd class hard wood (Sheesham) open rebated and prepared to receive glass, gauage etc(with sash bars) but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers in window, ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L glazed and skeleton shuitters 35 mm thick of 2nd class hard wood (Sheesham) open rebated and prepared to receive glass, gauage etc(with sash bars) but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers in window, ventilators are provided with sytle and rails edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Taking down chowkat with shutter without taking of shutter from frame n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutter only n. exc 1.0 sqm each complete all as specified and directed.

Taking down shutter only exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications& drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as specified and directed.

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 of SSR part -II complete all as specified and directed.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B21, complete all as specified and directed.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Aluminium handles, cast type anodised, 100mm long complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring, complete all as specified and directed.

S&F 140mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regulated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed complete all as specified and directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.

Taking down hinges, all types of door fittings i.e handle,towerbolt,sliding bolt any type any size, complete all as specified and directed.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

S&F mild steel TMT bars 8mm dia and over, cut to length, bent to shape requred, including cranking, bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F 6 to 8 mm TMT bars in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed.

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed.

M&Lwire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or pea size gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

S&F in repair for Aluminium Anodised window, ventilator fixed type shutter, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw, complete all as specified and directed.

S&F in repair for Aluminium Anodised door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw, complete all as specified and directed.

M&L 20-25 mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over and including cement screed bed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L 20-25 mm thick machine cut Kota stone slab as in skirting /riser over and including rendering 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed. (Note : Rendering will not be measured and paid separately)

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone agrregate) as in sub base floor etc complete all as specified and directed.

M&L for 40mm thick PCC type B-1 1:2:4 ( 20mm graded agg) finished fair and even using extra cement complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using (12.5mm graded stone aggregate ) as in sunken floor mixed with water proofing compound finished surface even and smooth with and using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately.

M&L Plain Cement concrete Type B-0, 1:2:4 (12.50mm graded aggregate), 25 mm thick as in sub-base of floors complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 300x200 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and directed. (Note : Rending will not be measured and paid separately)

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick rendering in CM 1:3 complete all as specified and directed. (Note : Renering will not be measured and paid separately)

M&L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and incluing 15mm thick screed CM1:6 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L non-skid coloured ceramic tiles 300x300x7 mm in flooring, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.

M&L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed in CM1:6 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles (Dark Shade) 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over and including 15 mm thick screeding in CM 1:6 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L Chequered cement concrete coloured tiles 20 cmx20cmx20 mm thick with coloured cement and no pigment , set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:4 as in floors complete all as specified and directed. ( (Note : Screed bed will not be measured and paid separately)

M&L coloured/designed as approved wall tiles (extrior grade) 8 to 10 mm thick area of each tile exc 0.09 sqm but n.exc 0.25 sq m in vertical/horizontal surface set and jointed in neat cement slurry and pointed in white/colured cement and pigment to match over and including 10 mm thick rendering in CM 1:3 as in wall/floor complete all as specified and directed. (Note : Rendering will not be measured and paid separately)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L 60 mm thick PCC interlocking tiles (rubber laminated finish ) of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and directed. ( Note-Sand cushion shall not be measured and paid seperately.)

M&L 60 mm thick PCC interlocking tiles of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and directed. ( Note-Sand cushion shall not be measured and paid seperately.)

Rendering 15mm thick cement plaster in cement mortar 1:3 as in brick/concrete surface of sunken portion using water proofing compound complete all as specified and directed. (Note : Water proofing compound shall be measured & paid seperatly.)

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on ceiling surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster brick/stone wall, ceiling/facia (as in patch work) etc including racking out joint, hacking for key, scrubbing down with water complete including M&L for rendering plaster 10mm thick in cement mortar 1:3 on concrete surface of wall/ceiling/facia including one bonding coat with pidilite chemical and making good to match the adjecent surface complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

Taking down cement plaster on ceiling surface including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without extra cement, cement mortar mixed with WPC @ 3% of weight of cement complete all as specified and directed. Note: WPC shall be measured & paid for separately.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without extra cement, cement mortar mixed with WPC @ 3% of weight of cement complete all as specified and directed. Note: WPC shall be measured & paid for separately

M&L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M&L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

S&F glass pan ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified and directed.

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete all as specified and directed.

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads in repairs complete all as specified and directed.

S&f for 12 mm thick sheet glass odinary qulity and glazing with neosprene beading of any size any postition complete all as specified and directed.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated creosote treating small articles such as back of chowkats & hold fasts etc area n exc 0.10 sqm each, complete all as specified and directed.

All as per item 105 above but treating small articles such as hold fasts etc area n exc 0.10 sqm each by tar.

M&L for Two coats of black bitumenous paint over a coat of red oxide zinc chrome primer including preparation of new steel surface not exceeding 10 cm width/girth complete all as specified and directed.

Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of 15 mm bore complete all as specified and directed.

Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of 20 mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections of 15 mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections of 20 mm bore complete all as specified and directed.

Re-fixing old steel tubing of 15 mm bore in new or old position complete all as specified and directed.

Re-fixing old steel tubing of 20 mm bore in new or old position complete all as specified and directed.

S&F 20mm dia unplasticised PVC pipes of pressure tating 10 kgf/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and directed.

S&F 15mm dia unplasticised PVC pipes of pressure tating 10 kgf/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and directed.

Dismantling PVC water tanks exc 250 ltr but n. exc 500 ltr capacity and removing to store, complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store, complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy(fancy type), chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe, complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, fancy type,chromium plated screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repair CP Angle stop cock ( two way) long thread with wall flange, fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repair health faucet brass CP with 15 mm dia complete all as specified and directed.

S&F in repair white Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube, complete all as specified and directed.

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC OHT tanks complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) for 32/40mm dia complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S&F in repair CI 'P' or 'S' trap of 100mm size complete all as specified and directed.

S&F stack clamps made out from 50x5mm size flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to walls or roof for 100mm bore of pipe etc complete all as specified and directed.

Taking down pipes (any sizes) incl all fittings, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend with access door complete all as specified and directed.

M/L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed concrete to SGSW pipes of 300 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 300 mm bore dia incl packing under & completely surounding pipes with conrete complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & & completely surounding pipes with conrete complete all as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & & completely surounding pipes with conrete complete all as specified and directed.

Salt-glazed stone ware drain pipe grade 'A' 150 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed.

Salt-glazed stone ware drain pipe grade 'A' 200 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed.

Salt-glazed stone ware drain pipe grade 'A' 300 mm bore dia laid in trenches & jointed in CM 1:1 complete all as specified and directed.

Cast iron 150mm dia pipes S/S including specials Class LA supplied and laid and fixed in RCC Flush Out Tanks complete all as specified and directed.

Cutting salt -glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cemnet mortar 1:1 for 150mm dia SGSW pipes, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm white, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, antisyphonage pipe, etc (excluding flushing cistern and flush pipe) complete including making good to floor complete all as specified and directed.

S&F vitreous china Europeon Water Closet (one piece) of specified make with flushing cistern & white seat cover complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F in repairs vitreous china urinals, flat back of size 465mmX355mmX265mm, white with grating and union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints, suitable for 15mm dia GI pipe complete all as specified and directed.

S&F 32mm dia waste pipe of polythelene,flexible, for wash hand basin or urinals complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer -in-Charge

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section, complete all as specified and directed.

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as specified and directed.

M&L for false ceiling with GI powder coated frame work and mineral fibre ceiling tiles Dune Max RH 99 of Armstrong or equivalent of Everest, suspended with ceiling complete all as specified and directed.

S & F Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter complete all as specified and directed.

S & F washer for flushing cistern including taking down old washer complete all as specified and directed.

S &F door seal with aluminium 20 x 1.5 mm strips with wool complete all as specified and directed.

S&F PVC Syphon to PVC flushing cistern including taking down old syphon complete all as specified and directed.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified and directed. (Floor door springs where renewed shall be measured and paid separately under appropriate

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs,replacement of hinges,handle,lock of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 12 mm glass and making the door and shutter serviceable complete all as specified and directed.(Floor door springs where renewed shall not be measured & paid seperately it includes the rate of floor spring also)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified and directed. (Floor door springs where renewed shall be measured and paid separately under appropriate

S &F in repair aluminium partition with pre-laminated particle board at bottom panel and 5.5.mm thick glass on top panel including glazing clip and neosprene rubber beading complete all as specified and directed.

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL)

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL)

Temporarily blocking of sewage line with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed and taking out the blocking arrangements of inlet and making the system functional all as specified and directed for 150 mm bore size of pipe lines.

All as per Sl No 186 above but 250 mm bore.

All as per Sl No 186 above but 300 mm bore.

M/S AMARJIT SINGH