Interior, Renovation, Furnishing , Water Proofing and Allied work in M.P. Council of Science and Technology at Vigyan Bhawan, Nehru Nagar, Bhopal

Amount

Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required.Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. with solid poly propely ne made soft closing seat cover (Premium Range) Size 360 x 640 x685mm

White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 160x580x450 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Size 360x360x120mm

White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 475 X 315 X715 mm with15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range)

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE- PAPER HOLDER WITH FLAP - AQN-CHR-7753

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE -ANGULAR STOP COCK WITH WALL FLANGE - QQP- CHR-7053PM

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE -2-WAY BIB COCK WITH WALL FLANGE QQP-CHR-7041PM

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE- 3- Hole Basin Mixer without popup waste system QQP-CHR-7189PM

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE- WASTE COUPLING 32MM SIZE FULL THREAD WITH 130MM HEIGHT - ALD-CHR-705L130

PLUMBING CP FITTING - JAQUAR MAKE QUEENS PRIME RANGE- BOTTLE TRAP (WITH INTERNAL PARTITION) 32MM SIZE WITH BOTH 300MM LONG CONNECTING PIPES & WALL FLANGE - ALD- CHR-769L300X300

SOFA: Supplying and installing Sofa of Make Godrej/ Featherlite / CSPL/ Wipro/BTF having specification as under: Upholstery : PVC Frame Material : Tropical Solid Wood joined by means of hardened steel screws and steel bolts, as well as glue. Seat Foam : Slab stock foam along with recron sheet. Foam Density : 17 kg/ cubic cm. Back Foam : Slab stock foam with recron fill. Foam Density : 17 kg/cubic cm Webbing : S-spring with cross menbrane Inner frame basic structure: made of wooden and commercial ply 12 mm thick frame seat fome use 40kg/m3 in back 32kg/m3 leatherite 1mm+- 0.1 mm upholstery and leg stainless steel 202 grade flate size 90X10mm thick and pvc shoe is used in the bottom of the frame. Providing and placing sofa inner frame , basic structure made of wooden and commercial ply 12 mm thick frame seat fome use 40kg/m3 in back 32kg/m3 leatherite 1mm+- 0.1 mm upholstery with wooden leg. 2 Seater

providing and applying of crack seal wherever required for filling in cracks of horizontal roof and vertical walls of building. The substrate must be checked for its soundness using a small hammer. All cracks and damaged portions of up to 3 mm should be treated with smartcare Crack Seal.After applying crack seal on roof and walls and making the surface even Apply a self priming coat of smartcare Damp Proof there will be 3 coats of damp proof. Apply two perpendicular coats of SmartCare Damp Proof without dilution. While the material is wet insert a SmartCare Joint Tapes in all corners and joints. Achieve a forced coverage of 10 square feet per litre for the system and for vertical walls is 20-25 square feet per litre.

Wall Panelling:- Removing and replaceing, Taking the the existing Wall Panneling with accoustical wall panneling made out of GI section/Secondary wood frame, having infill of glasswool covered with 12 mm thick Ply dully laminated with 1mm thick laminatehave the below properties. ACOUSTIC FEATURES Pitch (mm) 2.9x2.9 Diagonal Hole diameter (mm) Ø 0.75 Hole depth (mm) 0.8 Perforated area (%) 2.9 Sound absorption Plenum 50mm αw 1.90 NRC 1.90 Plenum 200mm αw 0.90 NRC 0.85 Absorption class A Mineral wool behind 50mm 50kg/m3

Carpet :- Removing and replaceing, Taking the the existing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 6 mm and above with total mass of 4200g/m2 approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area.

Providing and fixing of Mineral Fibre Cloth Covered Acoustical Suspended Ceiling System with 16mm thick tegular edge tiles of size 595x595mm and Wooden ceiling system in mix design as approved by Engineer-in-charge, in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-charge. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled.

Providing and fixing decorative false ceiling with 100-150mm POP Cornice & Cove as shown in detail drawing.at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, as per direction of an architect & Engineer in Charge flat measurement of ceiling including cove & cornice to be considered. 12.5mm thick tapered edge gypsum moisture resistant board

Supply Installation Testing & Commissioning of 8" dia music speakers (6 to 8WATTS) (Bosch LBD8353 + B377/equivalent model of approved make). All speakers to be equipped with Line matching transformer for direct connection to 4 to 6 Watts 100 / 70 V output line.

ROLLER BLINDS:- Providing and fixing of roller blinds with Zebra pattren of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Dismentaling of existing wall panneling, removing of old, dismentaling of existing false ceiling.

Providing & Fixing of table dimension in Running Meter with 750mm Ht and 600mm width. Worktop shall be made of 18mm plyboard with 1mm thick laminate on top and backing laminate of 0.6mm All the exposed edges are finished with teak wood lipping pressed. Sides are made of 18mm plyboard dully laminated with 1mm thick laminate and inside to have .6mmm laminate. The table has to be aesthically designed sections .The table to have a provision charging points for computers with pop up charging inbuilt in table on the top. The above furniture should be as per specification and sample approved by client. Approved make: Godrej/ featherlite/ CSPL/ Wipro/ BTF.

LOW BACK MEETING CHAIR -Size: Height Overall/Seat max:1105/510mm, Min:750/440mm, Depth:660mm, Width:660mm, 5 Prong nylon base for stability. Twin wheel heavy duty castor for easy mobility under load. Hot pressed plywood with steel T Nuts for rigid fastening. Sturdy steel coloumn gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel coloumn. Lockable center tilt mechanism and with single peiece die castes PP arm rest. Quality leatherite upholstry with double stich. High density PU cushion. Approved make: Godrej/featherlite/CSPL/Wipro/BTF.

Providing and fixing of moterised screen for projector size 12'x 10'

Providing and fixing of overhead projector EB-1485Fi, Resolution full HD(1080P), white brightness 5000 ANSI lumens, Colour Brightness 5000 ANSI Lumens, contrast ratio over 2,500,000:1 , Light Source Life-20000 Hrs.

Providing and fixing of slat wall with the help of slot coloumns with their glass shelf fixed dully fitted on the paneling with 12mm thoughed glass on it of approved colour.

PANELLING WITH WPC PANELS -Providing and fixing WPC Panels of thickness 25mm with the help of Fasteners/Screws etc of approved quality edges to be sealed with macthing profile on the ends of the panels throughout sealing the panelling. Panel to be fixed in a jointless manner that no joints to be visible. Panels to be fitted from the floor to the top of the ceiling giving a asthetic look with necessary adhesives,Screw and Edge of approved Colour,quality ,texture and Make in approved Design and pattern.This work will include all material,hardware, adhesive, lead, lifts for all floor, handeling and labour etc complete and nothing will be paid extra for execution of the item. All work is to be executed as per the direction and approval of Engineer In charge.

WALL PAPER- Providing and fixing wall paper to be coated with a protective layer of vinyl and it should be resistant to moisture and easily cleaned of approved shade and make.

Supply, Installation, Testing & Commissioning of 24 Port CAT 6 Key stone patch panel 1U size suitable for receiving CAT 6 cable with all fixing arrangement and connections.(D-Link, Legrand, Molex, Systemax, Valrack, AMP Make) Note:- The Bidder Shall quote his own rates for item rates.(item 01 to 26)

Bidder Name

Amount

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)

Creating Space Private Limited(GSTN-23AAGCC3854R3Z5)

BONTON TECHNOMAKE PRIVATE LIMITED

BONTON TECHNOMAKE PRIVATE LIMITED