Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81.5 LAccepted-AOC | L1 | Accepted-AOC L1 is lower then L2 | |
| 2 | L2₹85.0 L+₹82,038.32 (0.97%)Rejected-AOC | L2 | Rejected-AOC L2 is Higher then L1 |
| Sl No | Description | Qty | Unit | Ravi Electricals L1 | T PAULKANNU & CO L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, Testing Commissioning and Handing over of 250 KVA Diesel Generator set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with Standard Control Panel of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity developing 310 BHP with acoustic enclosure water cooled clock wise rotating feed pump with 200 KW/250 KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and Standard Control panel as detailed below including transporting & unloading charges. (For full specification is see annnexuare IV of this Tender condition) | 2 | set | 27,12,150 ₹54,24,300 Lowest | 27,38,610 ₹54,77,220 |
| 2.00 | Supply and installation of Additional length of exhaust piping with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation.
(SR) (M-2085 ) | 12 | One Running Metre | 2,270 ₹27,240 Lowest | 2,293 ₹27,516 |
| 3.00 | Providing suitable concrete foundation with cement concrete 1:2:4 of height 5 feet with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation.
( MR ) | 2 | Job | 51,250 ₹1,02,500 Lowest | 51,750 ₹1,03,500 |
| 4.00 | Preparation of Site plan, physical layout electrical schematic diagram (10 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees and obtaining safety certificate from CEIG.
( MR ) | 1 | Job | 10,250 ₹10,250 Lowest | 10,350 ₹10,350 |
| 5.00 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. | 10 | Each | 3,045 ₹30,450 Lowest | 3,075 ₹30,750 |
| 6.00 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
( SD-76 ) | 100 | One Running Metre | 500 ₹50,000 Lowest | 505 ₹50,500 |
| 7.00 | Supply and laying of 3 ½ x 300 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
( SD-668 ) | 150 | One Running Metre | 2,084 ₹3,12,600 Lowest | 2,104 ₹3,15,600 |
| 8.00 | Supply and clamping of 3 ½ x 300 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
( SD-209 ) | 50 | One Running Metre | 1,887 ₹94,350 Lowest | 1,905 ₹95,250 |
| 9.00 | Supply and fixing of brass cable gland for 3 ½ x 300 sq.mm. PVC LTUG aluminium armoured cable with earth connection.
( SD-173 ) | 8 | Each | 944 ₹7,552 Lowest | 953 ₹7,624 |
| 10.00 | Supply and providing cable end termination of 3-1/2 x 300 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
( Data-A ) | 8 | Each | 721 ₹5,768 Lowest | 728 ₹5,824 |
Tender Value
₹86 L
EMD Value
₹53,000
Closing Date
13 Jun 2025, 11:00 amClosed
Joint commissioner /Executive officer
Joint commissioner /Executive officer Arulmigu Meenakshi Sundareswarar Temple, Madurai
Providing Two Numbers of 250KVA DG Set to the Newly Constructed Yathri Nivas Building at Madurai.
2025_HRCE_551340_1
2472/2022/D2
Open Tender
Electrical Works
Item Wise
MADURAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹53,000
27 Nov 2025
25 Apr 2025
13 Jun 2025
25 Apr 2025
13 Jun 2025
25 Apr 2025
25 Apr 2025 - 12 Jun 2025
Amount
Supply, Testing Commissioning and Handing over of 250 KVA Diesel Generator set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with Standard Control Panel of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity developing 310 BHP with acoustic enclosure water cooled clock wise rotating feed pump with 200 KW/250 KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and Standard Control panel as detailed below including transporting & unloading charges. (For full specification is see annnexuare IV of this Tender condition)
Supply and installation of Additional length of exhaust piping with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation. (SR) (M-2085 )
Providing suitable concrete foundation with cement concrete 1:2:4 of height 5 feet with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation. ( MR )
Preparation of Site plan, physical layout electrical schematic diagram (10 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees and obtaining safety certificate from CEIG. ( MR )
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. ( SD-76 )
Supply and laying of 3 ½ x 300 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. ( SD-668 )
Supply and clamping of 3 ½ x 300 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. ( SD-209 )
Supply and fixing of brass cable gland for 3 ½ x 300 sq.mm. PVC LTUG aluminium armoured cable with earth connection. ( SD-173 )
Supply and providing cable end termination of 3-1/2 x 300 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. ( Data-A )
Towards Charges for Transporting and unloading the DG Set at the site. ( MR )
Supplying and installation of Synchronizing Generator set Panel with the following Specifications:- 1. Panel with Siemens Grey Powder Coating 2. Base Channel 3. Outgoing Metering Chamber 4. RYB Indication Lamp 5. MFM Meter with RS485 6. 6A/3P MCB 7. TNC Switch 8. CT's (800/5A) CT's Wiring 9. Aluminum Busbar,1RX75X10mm Phase, 1RX75X06mm Neutral 1RX40X06mm Earth. 10. Busbar Support 11. Busbar Sleeves 12. Bolts & Nuts 13. Power Wiring 14. Control Wiring 15. Wiring Accessories ((For full specification is see annnexuare IV of this Tender condition)
Sub total
T PAULKANNU & CO (BID ID -1366021)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_658141.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .