1. Construction of Science Lab, Art Craft Room and Library Room at Govt High School Balgran, Zone Drabshalla, District Kishtwar

Amount

Construction of Science Lab, Art Craft Room and Library Room at Govt High School Balgran, Zone Drabshalla, District Kishtwar (Rs. 42.17 lacs)

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 60% all kinds of soil and 40% ordinary rock)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: ( 60% All kinds of soil and 40% ordinary rock)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed (including all lead, lift and carriages)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including all lead, lift and carriages)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (including all lead, lift and carriages)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including all lead, lift and carriages)

Extra for brick works in superstructure above plinth level upto V floor(By manual means)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all lead, lift and carriages)

Centering and shuttering including strutting~ propping etc and removal of form work for.foundations footings bases of columns.

Centering and shuttermg including strutting, propping etc. and removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centering and shuttering including strutting~ propping etc and removal of form work for columns, piers, abutments, pillars, posts, and struts

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position second class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm

Providing and fixing 35 mm thick wire gauge shutters using galvanised M.S wire gauge of average width for aperture 1.4 mm in both direction with wire wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws (second Class Deodar Wood)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (including all lead, lift and carriages)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

12 mm thick cement sand plaster in 1:6 mix (including all lead, lift and carriages)

6mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS: 3087 marked to frame, backing or studding with screws etc complete (Frames, backing or studding to be paid seperately) 12 mm thick

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all lead, lift and carriages)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate.Crushed 6mm thick (including all lead, lift and carriages)

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 (including all lead, lift and carriages)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 6 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Applying prinming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying cement based putty of average thicknes 2 mm of approved brand and manufacture over the plastered walls surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed. (including all lead, lift and carriages)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge

Providing and fixing plain eves boarding readymade G.I. Sheets including (250x32mm) second class kail wood

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand). (including all lead, lift and carriages)

Dry random rubble masonry with hard stone in foundation and plinth Using nallah stone without bond stone

Providing and fixing of almirahs for the display of art craft room items 9" deep using 19mm thick plywood and standard quality sunmica over shutters and glass paints including neccessary fittings and hardware items as will be directed by enginneering incharge complete job.

Construction of Art Craft Room at Govt High School Shirodh, Zone Drabshalla, District Kishtwar (Rs. 12.24 lacs)

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 60% all kinds of soil and 40% ordinary rock)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: ( 60% All kinds of soil and 40% ordinary rock)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed (including all lead, lift and carriages)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including all lead, lift and carriages)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. (including all lead, lift and carriages)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (including all lead, lift and carriages)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including all lead, lift and carriages)

Extra for brick works in superstructure above plinth level upto V floor(By manual means)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. (including all lead, lift and carriages)

Centering and shuttering including strutting~ propping etc and removal of form work for.foundations footings bases of columns.

Centering and shuttering including strutting~ propping etc and removal of form work for columns, piers, abutments, pillars, posts, and struts

Centering and shuttermg including strutting, propping etc. and removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (including all lead, lift and carriages)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

12 mm thick cement sand plaster in 1:6 mix (including all lead, lift and carriages)

6mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift and carriages)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hings bright finished of required size with necessary 35 screws.(Second Class Kail Wood)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all lead, lift and carriages)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate.Crushed 6mm thick (including all lead, lift and carriages)

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 (including all lead, lift and carriages)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 6 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying cement based putty of average thicknes 2 mm of approved brand and manufacture over the plastered walls surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed. (including all lead, lift and carriages)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge

Providing and fixing plain eves boarding readymade G.I. Sheets including (250x32mm) second class kail wood

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand). (including all lead, lift and carriages)

Dry random rubble masonry with hard stone in foundation and plinth Using nallah stone without bond stone

suvaini construction

M/S SUNSHINE CONSTRUCTIONS KISHTWAR