Construction of ITI building at Jalog in Tehsil Sunni District Shimla SH Providing electrical installation therein

Amount

Wiring for light point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C Light Point

Group C Fan Piont

Group C Exhaust Fan Piont

Group C Call Bell Piont

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing electrical switch board having 3 Nos.of 5 Amp.switcghes and socket on suitable size of metal box of 200X150X75mm deep(nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 Pin 5/6 amp.socket outlet & 5/6 Amp.piano type switch,connections, painting etc. as reqd. (For Light Plugs)

Providing and fixing following rating double pole switch disconnector fuse unit cubical type, 415/500 volts, with 2 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 32 A Category A.

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 32 A Category A.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 380 mm sweep

Exhaust Fan, Light duty, (Domestic) 225 mm sweep

Providing and installation of following type of ultra slim decorative LED batton with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required.with Two year warranty. Make:Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Batten Light 20 W 1200mm

LED Batten Light 10 W 600mm

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Fixed type wall bracket 150 dia, single lamp.(Category-A)

Providing, Installation,of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink,suitable for input voltage:AC 220-240 V,50/60Hz,including mounting in existing fixture,testing etc.as required complete in all respects.Make:Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED retrofit Lamp 8W

Providing, Installation,of following type of LED surface mounted square downlight with polycarbonate body and aluminium heat sink, suitable for input voltage:-AC 220-240V, 50/60Hz, including mounting the fixture, testing etc. as required complete in all respects with two year warranty. Make:-Philips, Twinkle, GE, or any other approved by Engineer-in-Charge.

Surafce 36 watt LED

Surafce 12 watt LED

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x6.0 Sq. mm.

2x10 Sq. mm.

2x16 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

315/400 Amp. -50 KA

160 Amp. -16 KA

100 Amp. -16 KA

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Double door-12 way

Double door-16 way

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

32 Amp. Category-A

63 Amp. Category-A

100 Amp. Category-A

400 Amp. Category-A

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. Each of cross-sectional area (38.10mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. Each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. Each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 450mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 4 sq. mm (twin core)

Armoured cable 6 sq. mm (twin core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 150 sq. mm (3.5 core)

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and coke for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 25mm x 5mm copper strip in 40 mm dia. G.I. pipe from earth electrode etc. as required.

Providing and fixing 25mm x 5mm G.I. strip in 40 mm dia. G.I. pipe from earth electrode etc. as required.

Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for earth connections etc. as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding Each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

450 mm deep (nominal)

Supplying and fixing of Encloser for MCCB 100 A, which should be suitable for 3P and 4P MCCB, also suitable for upto 125 A MCCB, 50 KA to best satisfaction of Engineer-In-Charge

Providing ,installing ,testing ,commissioning of classic steel poles made up of Mild steel tubes with cast aluminium embellisment, primer coated and painted with ployurethane paint.Suitable for single/double/triple /four side Post Top/Drop down luminaires. with service window at bottom comprising four way 25 amp connector terminal and a MCB compelete in all respects including testing & commissioning complete in all respect to the best satisfication of Engineer in-charge.

6 Meter long Classic Steel Pole

Providing ,installing ,testing ,commissioning of L-Bracket with Aluminium Embellishments suitable for single ,Twin,Triple and four Nos. Drop down/Post Top Mounting options. compelete in all respects including testing & commissioning complete in all respect to the best satisfication of Engineer in-charge.

L-Bracket Single Mounting 700mm

Providing ,installing ,testing ,commissioning of LED drop down fixture,made of spun aluminium body with Power LED's are mounted directly on inbuilt Heat Sinks.A UV stabilized P.C./PMMA diffuser is provided for Glare Free Lighting with high visual comfort . compelete in all respects including testing & commissioning complete in all respect to the best satisfication of Engineer in-charge. Make:- Philips/Twinkle/GE or any other approved by Engineer-in-Charge

CORBELL LED 40W

Providing and fixing of required sizes 15" anchor bolt for fixing of 6 mtr clasic steel pole in foudation.

Rajesh Kumar Jaswal