8390-REPAIR AND POLISHING, PAINTING AND REPLACEMENT OF ACESSORIES OF ALL TYPE OF MISC FURNITURE OF OTA, MH, 12 MADRAS AND OTHER UNITS UNDER GE STM

Amount

Repairs to Chair Dining by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-228/279

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Stiffener (Side)

Stiffener (Centre)

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 75 x 75 x 20mm thick to chair dining Fixing of bracket should be done with fevicol and suitable steel screws as per std workmanship.

Taking off existing U/S cane from chair dining and cleaning the rebated portions and re caning with new cane plastic 2 mm half round not recycled and perimeter with 3.5 mm half round cane as per Godrej pattern and all as shown on drawing.

Tightening the wooden members with bamboo pins where ever required in the chair to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly / rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw and complete all as specified in drawing and as directed.

Repairs to Chair Writing by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-250/280.

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Arm Rest

Stiffener (Side)

Stiffener (Centre)

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 75 x 75 x 20mm thick to chair writing and fixing of bracket should be done with fevicol and suitable steel screws as per std workmanship.

Taking off existing U/S cane from chair writing and cleaning the rebated portions and re caning with new cane plastic 2 mm half round not recycled and perimeter with 3.5 mm half round cane as per Godrej pattern and all as shown on drawing.

Tightening the wooden members with bamboo pins where ever required in the chair writing to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly / rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw and complete all as specified in drawing and as directed.

Repairs to Chair Easy by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drawing No FD-229

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Arm Rest

Side Rail of Back Rest

Upper/Lower Rail of Back Rest

Taking off existing U/S cane from chair easy and cleaning the rebated portions and re caning with new cane plastic 2 mm half round not recycled and perimeter with 3.5 mm half round cane to seat and back as per Godrej pattern and all as shown on drawing.

Tightening the wooden members with bamboo pins where ever required in the chair easy to made to existing shape all as directed and Preparing the surface of old and new members of chair dining by smoothly / rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw and complete all as specified in drawing and as directed.

Bed Plywood Top (Drg No FD-246)

Removing the existing UNSV ply wood from the head board and providing new one side teak face plywood 4mm thick of size 900x450mm for both sides including 12mm half cut teak wood beading at the front and back ply wood faces of the head board as shown on drawing.

All as per item No.9.01 here-in-before but for foot board of size 900x300mm

Removing the existing unserviceable stiffeners and S & F New stiffeners of II nd class hard wood of size 40 x 30 mm all as per drg.

Removing existing unserviceable 12mm thick plywood from Bed plywood top and Supply and fixing of new plywood 12mm thick BWR of size 1800 x 900mm conforming to IS 303 and as shown on drg.

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 100 x 100 x 25mm thick to bed hard. Fixing of bracket should be done with fevicol and suitable steel screws.

Tightening the wooden members with bamboo pins where ever required in the bed plywood top to made to existing shape all as directed and Preparing the surface of old and new members by smoothly / rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface complete uniformly upto glossy mirror finish, including providing of 04 Nos hard PVC shoe of heavy duty to the chair with steel screw and complete all as specified in drawing and as directed.

M&L for repairs to the following Tables by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing.

Legs for Table Dining 8 persons FD-239/273/376

Long Rail for Table Dining 8 persons FD-239/273/376

Short Rail for Table Dining 8 persons FD-239/273/376

Stiffeners for Table Dining 8 persons FD-239/273/376

Legs for Table Dining 6 persons FD-239/273/376

Long Rail for Table Dining 6 persons FD-239/273/376

Short Rail for Table Dining 6 persons FD-239/273/376

Stiffeners for Table Dining 6 persons FD-239/273/376

Legs for Table peg

Top Rail (Long) for Table peg

Bottom Rail (Short) for Table peg

Legs for Table centre FD-235/274

Top Rail (Long) for Table centre FD-235/274

Bottom Rail (Short) for Table centre FD-235/274

Legs for Teapoy FD-232/382

Long Rail for Teapoy FD-232/382

Bottom Rail (Short) for Teapoy FD-232/382

Legs for Table writing FD-249/275

Top Rail (Long) for Table writing FD-249/275

Top Rail (Short) for Table writing FD-249/275

Stiffener (Long) for Table writing FD-249/275

Stiffener (Side) for Table writing FD-249/275

Side/Back side ply 6mm thick commercial plywood for Table writing

M&L for replacement of existing u/s Door Shutter with piano hinge for Table writing with new door shutter made of 18mm thick prelaminated particle board exterior grade ISI marked as per existing size and shape including fixing of S/steel piano hinges ISI Marked and beading as per drg and provide S/steel D type handle to the door of approved quality as directed.

M&L for replacement of existing u/s Drawer for Table writing with new drawer as existing size and shape and provide S/steel D type handle to the drawer of approved quality as directed.

M&L for replacement of existing u/s Legs for Table 3'x2' with/without drawer FD-231/283/284 with new teakwood legs as per existing size.

M&L for replacement of existing u/s Long Rail (Top) for Table 3'x2' with/without drawer FD-231/283/284 with new teakwood long rail as per existing size.

M&L for replacement of existing u/s Short Rail (Top) for Table 3'x2' with/without drawer FD-231/283/284 with new teakwood short rail as per existing size.

M&L for providing Triangular TW Corner Brackets of size 75x75x25mm for Table 3'x2' with/without drawer, Teapoy, Peg table, table writing, centre table. Fixing of bracket should be done with fevicol and suitable steel screws.

M&L for providing Triangular TW Corner Brackets of size 100x100x35mm for Table dining 6 per & table dining 8 per and fixing of bracket should be done with fevicol and suitable steel screws.

M&L for replacement of existing u/s Drawer for Table 3'x2' with drawer FD-231/283/284 with new drawer as existing size and shape and provide S/steel fancy Knob as approved to the drawer.

M&L for removing the existing unsv table top of following tables and Supply and fix new top with s/steel screws to the following tables:- Table top shall be made of 18/19 mm thick prelaminated MDF board both side, exterior grade (grade-I, type-II) ISI marked with approved colour or shade as approved by GE with 2 mm thick PVC edging of matching colour all round on table top etc shall be fixed with strong bonded chemical through hot pressed machine to be provided as per standard workmanship. rest all as specified and shown on drg. Note: Hand pressed/manual pressed beading will not be accepted.

Table Dining 8 Person (1800 x 900mm)

Table Dining 6 Person (1500 x 900mm)

Table Dining 3' x 3' (900 x 900mm) steel/wooden

Table Dining 4' x 3' (1200 x 900mm)

Table Peg (450 x 300mm)

Table Centre (900mm x 450mm)

Teapoy (450mm x 600mm)

Table Writing (1150 x 600mm)

Table 900 x 600mm without Drawer/with drawer

Tightening the wooden members with bamboo pins where ever required in the following items to made to existing shape all as directed and Preparing the surface of old and new members smoothly / rubbing with 120 Gde or various sizes sand paper/ abrasive cloth or machine and clean off surface and applying sealer wherever required to fill and smoothen the surface and apply two coat of french polish to the entire external and visible surface of furniture complete uniformly upto glossy mirror finish, and complete all as specified in drawing and as directed by GE/Engineer in Charge:-

Book Case wooden FD-237,355

Hat Stand FD-233/361

Table 900x900x760

Table Centre FD-235/274

Table Dining 6 Pers FD-239/273/376

Table Dining 8 Pers FD-239/273/376

Table Dressing Gents FD-230

Table Dressing Ladies FD-251/378

Table Peg FD-236/277/384

Table 900x600x760mm with /without drawer FD-231/284/283/224

Table Writing FD-249/275

Teapoy FD-232/382

Chair Easy Cushioned FD-358

Table dressing ladies (Drg No FD-251 & FD-378, (FD/MAP/07) )

M & L for replacement of UNSV looking Mirror incl ply of size as per drg with new looking mirror 5mm thick electro copper plated with back of 6 mm thick ply wood commercial grade as per drg.

M&L for replacement of unsv Top of table dressing ladies with new top as per existing size made out of 18 mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 4 mm thick teak wood beading

M&L for replacement of unsv Sliding glass shutter with new glass shutter of size 270 x 300mm x 5mm thick complete.

M&L for replacement of unsv Aluminium Channel with new aluminium channel of size 12 x22 x550mm.

M&L for replacement of unsv Aluminium Channel with new channel of size 12 x22 x380mm

M&L for replacement of unsv Legs with new leg of size 45 x 45 x 150mm made out of 1 st class hard wood

M &L for Replacement of unsv drawer with new drawer as per existing size and provide D type s/steel handle to table dressing ladies & Table dressing ladies (MAP) as per drawing

M&L for replacement of unsv telescopic channel with new telescopic channel 12" long for drawer of table dressing ladies (MAP) as per drawing and as directed. Make : Hettich/Godrej/Link

M&L for replacement of unsv door shutter with new door shutter including stainless steel piano hinges of table dressing ladies (MAP) as per drg and complete all as specified.

M&L for replacement of unsv knob of shutter and drawer with new D type stainless steel handle of approved quality to be provided in table dressing ladies (MAP) as specified and directed by Engr-in-Charge

M & L for replacement of unserviceable cushion of stool dressing of table dressing ladies (MAP) with new 75mm thick 40 density cushion including upholstery of best quality tapestry cloth of approved colour and texture. Cost of tapestry should not be less than 350/- per meter.

M & L replacement of unserviceable caster wheel of stool dressing of table dressing ladies (MAP) with new heavy duty best quality caster wheel of approved quality as per drg and as directed.

Table dressing Gents (Drg No FD 230 & FD 379)

M&L for replacement of unsv Looking mirror with new mirror of size 760 x 380 x 5 mm thick electro copper plated mirror with back of 6 mm thick ply wood commercial as per existing size.

M&L for replacement of unsv Mirror frame with new mirror frame of size 20 x 25mm all around

M&L for replacement of unsv back ply with new back ply of 12mm thick plywood commercial, size of 300 x 900mm

M&L for replacement of existing u/s Drawer with new drawer as existing size and shape and provide S/Steel Knob as approved to the drawer.

Side Board (FD-26/FD-241)

Removing the existing unserviceable top/bottom of side board and supply & fixing new top/bottom of required size as per drg made out of 18 mm thick prelaminated particle board, exterior grade

Removing the existing unserviceable back of side board and supply & fixing new back of reqd size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed.

Removing the existing unserviceable door shutter of side board and S & F new door shutter of size 600x375mm made out of 18mm thick particle board exterior grade with suitable piano hinge and provide S/Steel D type handle to the door all as specified and as directed.

Removing the existing unserviceable side panel of the side board and supply and fixing new side panel of size 625x450mm made out of 18 mm thick particle board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed.

M&L for replacement of existing u/s Drawer for Side board with new drawer as existing size and shape and provide S/Steel D type handle as approved to the drawer.

M&L for replacement of existing u/s Leg for Side board with new leg made out of teakwood as existing size and shape and fixed with s/steel clamp and as directed.

Bin Lenin multipurpose MAP

Removing the existing unserviceable top/bottom of Bin Lenin and supply & fixing new top of size as per drg made out of 18 mm thick prelaminated particle board, exterior grade

Removing the existing unserviceable back of Bin Lenin and supply & fixing new back of size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed.

Removing the existing unserviceable door shutter of Bin Lenin and S & F new door shutter of size as per drg made out of 18mm thick particle board exterior grade with suitable piano hinge and provide S/Steel D type handle to the door all as specified and as directed.

Removing the existing unserviceable side panel of the Bin Lenin and supply and fixing new side panel of size as per drg made out of 18 mm thick particle board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed.

M&L for replacement of existing u/s Drawer for Bin Lenin with new drawer as existing size and shape and provide S/Steel D type handle as approved to the drawer.

M&L for replacement of existing u/s Leg for Bin Lenin with new leg made out of teakwood as existing size and shape and fixed with s/steel clamp and as directed.

TV trolley(FD/E6/MAP-04)

M & L Stainless steel "D" type handle of size 120mm of approved quality including removing the existing UNSV Handles of drawers of TV trolley and all as specified and directed.

M & L 18 mm thick Pre- Laminated particle board exterior grade ISI marked for Top of TV Trolley with 4mm thick teak wood beading duly polished all around as per drawing and as specified and as directed including removing the existing UNSV Top of TV trolley.

M & L 18 mm thick Pre- Laminated particle board exterior grade ISI marked for sides of TV Trolley with 4mm thick teak wood beading duly polished all around all as per drawing and all as specified and as directed including removing the existing UNSV Sides of TV trolley.

M & L 5 mm thick Glass shutter with magnetic catcher with accessories for TV Trolley as per drawing and all as specified and directed including removing the existing UNSV/Broken Glass shutter of TV trolley.

M & L Castors Wheels of best quality as approved all as per drawing and all as specified and directed including removing the existing UNSV/Broken Castors wheels of TV trolley.

Hat Stand With Mirror

M & L for Replacement of unserviceable back ply wood with new plywood 6 mm thick as per drg incl

M & L for Replacement of unserviceable front ply wood with new ply 4 mm thick teak face all as per drg

M & L for Replacement of unserviceable looking mirror with new looking mirror with beading of hat stand as per drg.

M & L for Replacement of unserviceable pegs of hat stand with new Brass pegs of size as per drg and as directed

M & L for Replacement of unserviceable teakwood edging with new teakwood edging of size 35x6mm thick around of hat stand and as directed

Table dining 4 person (MAP)(FD/MAP-II/03)

M&L for providing Triangular TW Corner Brackets of size 100x100x35mm for Table dining 4 per. Fixing of bracket should be done with fevicol and suitable steel screws.

M&L for replacement of existing u/s Leg for table dining 4 per with new leg made out of teakwood as existing size and shape and fixed as per drg and as directed.

M&L for replacement of existing u/s long rail for table dining 4 per with new long rail made out of teakwood as existing size and shape and fixed as per drg and as directed.

M&L for replacement of existing u/s short rail for table dining 4 per with new short rail made out of teakwood as existing size and shape and fixed as per drg and as directed.

LEO ENTERPRISES

SRI CHAKRA CABINETS

M/s KM Marimuthu Achary

SIVA ENTERPRISES

SREE GOWRISHANKAR ENTERPRISES