Electrification jobs of Block No.-128 at INRP Site, Tarapur.

Amount

Three phase 415V AC, 4 wire metal enclosed, comparmentalized, fixed type, free standing, front access Normal Lighting Distribution Panel fabricated out of Pregalvanised G. I sheet steel with IP-42 degree of protection complete with switchgears, busbars, wiring, terminals, powder coated with approved shade as per the attached SLD

Three phase 415V AC, 4 wire metal enclosed, comparmentalized, fixed type, free standing, front access Emergency Lighting Distribution Panel fabricated out of Pregalvanised G. I sheet steel with IP-42 degree of protection complete with switchgears, busbars, wiring, terminals, powder coated with approved shade as per the attached SLD

Design, Manufacturing, Supply, Installation and Testing of three phase 415V AC, 4 wire, PCC panels fabricated out of Pregalvanised G. I Sheet steel with IP 42 degree of protection with switchgears, busbars, wiring, and terminals powder coated with approved shade as per the drawings

Supply of following way, Prewired with HFFR copper wires, horizontal type, metallic Door, single pole and neutral, 2mm thick Pre - Galvanised G. I sheet steel of MCB distribution board with incoming and outgoing slots , IP54, suitable for surface mounting , complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder coated with RAL7032 shade including earthing etc. with one no of 2 pole, 240V rating DP ELCB in the input and SPN MCB of rating 16 / 6 Amps in each phase suitable for 240V rating, Type "C" curve, 10 kA breaking capacity with removable gland plate having required number of knock out holes, neoprene gaskets etc as required

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 18 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 12 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 8 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole MCB of rating 16A and Outgoing MCB of double pole 6 A of quantity 4 Nos

Installation, Testing and Commissioning of following way, Prewired with HFFR copper wires, horizontal type, metallic Door, single pole and neutral, 2mm thick Pre - Galvanised G. I sheet steel of MCB distribution board with incoming and outgoing slots , IP54, suitable for surface mounting , complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder coated with RAL7032 shade including earthing etc. with one no of 2 pole, 240V rating DP ELCB in the input and SPN MCB of rating 16 / 6 Amps in each phase suitable for 240V rating, Type "C" curve, 10 kA breaking capacity with removable gland plate having required number of knock out holes, neoprene gaskets etc as required

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 18 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 12 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole ELCB of rating 40 A and 8 nos of outgoing slots of SPN MCB of rating 16A

Incoming slots suitable for one no of double pole MCB of rating 16A and Outgoing MCB of double pole 6 A of quantity 4 Nos

Supply of 10 amps and 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 10amps and 20 amps "C" curve, SP, MCB, in pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Installation, Testing and Commissioning of 10 amps and 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 10amps and 20 amps "C" curve, SP, MCB, in pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Supply of 2 Nos of 6 amps, Single Pole MCB, 240 volts rated "C" curve, of breaking capacity 10 kA with pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting

Installation, Testing and Commissioning of 2 Nos of 6 amps, Single Pole MCB, 240 volts rated "C" curve of breaking capacity, with pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting

Supply of 4 Nos of 6 amps, Single Pole MCB, 240 volts rated "C" curve, of breaking capacity with pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting

Installation, Testing and Commissioning of 4 Nos of 6 amps, Single Pole MCB, 240 volts rated "C" curve of breaking capacity, with pre galvanised G. I sheet steel enclosure, preferably powder coated suitable for surface / recess mounting

Supply of 4 way modular type switch box with cover plate, with 1 No of plug socket of rating 6/ 20 A and 1 no of modular compatible DOL starter

Installation, Testing and Commissioning of 4 way modular type switch box with cover plate, with 1 No of plug socket of rating 6/ 20 A and 1 no of modular compatible DOL starter

Supply of 12 Way modular domestic type Switch box with cover plate, 3 nos of switches of rating 6 Amp and 3 no of sockets ( 6/20 Amps ), suitable for surface mounting as per attached technical specification

Installation of 12 Way modular domestic type Switch box with cover plate, 3 nos of switches of rating 6 Amp and 3 no of sockets ( 6/20 Amps ), suitable for surface mounting as per attached technical specification

Supply and Fixing of rotary hammer of type GBH 200 professional as per technical specification

Supply of Industrial LED Luminaires suitable for indoor and outdoor application as per the attached technical specification

18 Watt, 2400 lumens IP65 4ft Batten of type " WT201C LED 24S - 6500 PSU L 120 S2 1 X LED

40 Watt, IP 65 rated LED fixture of type BRP 409 LED 039 CW HO NR FG S1 PSU GR

132 Watt, High Bay LED Lighting fixture of type BY325P LED160S CW PSU GR FG WB XTFCL V1

6.5W LED Bulkhead with a nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have a color temperature of 6500K and CRI > 70. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should be made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 6.5W (including driver). (Equivalent to Philips Make VISTA GLOW BULKHEAD "WT140W LED7S CW PSU S1 PC")

4ft Functional Batten with 2x18W LED Tube with a nominal system lumen output of 4200 lumens and a minimum system efficacy not less than 100lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of white powder coated CRCA sheet steel. The total power consumption should not exceed 38W (including driver). Similar to Philips Make "TMC501 with 2x18W TLED 865"

Recessed mounted LED lighting fixture of type RC380B LED 36S 6500 G4 L60 W60 PSU OD with CRI greater than 80

110 V DC rated, surface panel type 1 X 18W LED fixture as per attached technical specification

90W LED lighting fixture of type BRP409 LED 110 CW M2 FG PSU GR V3

140W LED lighting fixture of type BRP340 LED 175 CW HO SLC S2 PSU GR

Installation, Testing and Commissioning of Industrial LED Luminaires suitable for indoor and outdoor application as per the attached technical specification

18 Watt, 2400 lumens IP65 4ft Batten of type " WT201C LED 24S - 6500 PSU L 120 S2 1 X LED

40 Watt, IP 65 rated LED fixture of type BRP 409 LED 039 CW HO NR FG S1 PSU GR

132 Watt, High Bay LED Lighting fixture of type BY325P LED160S CW PSU GR FG WB XTFCL V1

6.5W LED Bulkhead with a nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have a color temperature of 6500K and CRI > 70. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should be made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 6.5W (including driver). (Equivalent to Philips Make VISTA GLOW BULKHEAD "WT140W LED7S CW PSU S1 PC")

4ft Functional Batten with 2x18W LED Tube with a nominal system lumen output of 4200 lumens and a minimum system efficacy not less than 100lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of white powder coated CRCA sheet steel. The total power consumption should not exceed 38W (including driver). Similar to Philips Make "TMC501 with 2x18W TLED 865"

Recessed mounted LED lighting fixture of type RC380B LED 36S 6500 G4 L60 W60 PSU OD with CRI greater than 80

18W, 110 V DC rated, surface panel type LED fixture as per attached technical specification

90W LED lighting fixture of type BRP409 LED 110 CW M2 FG PSU GR V3

140W LED lighting fixture of type BRP340 LED 175 CW HO SLC S2 PSU GR

Earthing and Lightening Arrestor

Supply, Installation and Commissioning of Copper Earth Plate 600 mm x 600 mm x 3 mm thick of high grade quality including accessories and providing PCC enclosure with Chequered cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre length with charcoal / coke and salt as per IS 3043 standard, technical specification and drawing

Supply, Installation and Commissioning of Copper Earthing rod with 25mm diameter and 3000mm long including accessories, and providing PCC enclosure with cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as per IS 3043 standard, technicals specification and drawing

Supply of following size earthing conductor as per the attached technical specification

95 Sq. mm Stranded bare tinned copper conductor

10 sq. mm stranded bare tinned copper conductor

185 sq. mm stranded bare tinned copper conductor

120 sq. mm stranded bare tinned copper conductor

70 sq. mm stranded bare tinned copper conductor

50 sq. mm stranded bare tinned copper conductor

35 sq. mm stranded bare tinned copper conductor

25 mm HDPE pipe

Laying of following size earthing conductor at 1000mm below ground level including excavation, connection to earth pits, refilling the trench, etc. as required

95 Sq. mm Stranded bare tinned copper conductor

10 sq. mm stranded bare tinned copper wire in 25mm HDPE pipe

Laying of following size earthing conductor on surface/concealed including clamping/ cleating on structure/floor/ceiling/wall/tray, making chase, repairing the same,interconnection through brazing/ bolting, etc. as required

185 sq. mm stranded bare tinned copper conductor

120 sq. mm stranded bare tinned copper conductor

70 sq. mm stranded bare tinned copper conductor

50 sq. mm stranded bare tinned copper conductor

35 sq. mm stranded bare tinned copper conductor

10 sq. mm stranded bare tinned copper conductor in 25mm HDPE pipe

Laying of 10 sq. mm earthing conductor in 25mm HDPE pipe on surface/ concealed including clamping/ cleating on wall, making chase, repairing the same, etc. as required

Supply and fixing of 25mm x 6mm GI strip along tray using suitable size GI saddle/clamp including interconnection, hardwares, etc. as required

Earth Test link Boxes ( MOC: Hot Dip Galvanised with powder coating ) as per the attached technical specification

Supply of single bend Pre-galvanised perforated cable tray with dome cover of Pre-galvanised G.I sheet steel of thickness 2.0 mm (14 G) with suitable accessories such as Horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside) of following widths and side height

150 mm (W), 100 mm (SH)

Installation of single bend Pre-galvanised perforated cable tray with dome cover of Pre-galvanised G.I sheet steel of thickness 2.0 mm (14 G) with suitable accessories such as Horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside) of following widths and side height

150 mm (W), 100 mm (SH)

Supply of ladder type cable tray of following size fabricated out of 2.5mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dip galvanized, single length not less than 2.5mtr with two coupling/ joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment

300 mm (W), 100 mm (SH)

150 mm (W), 100 mm (SH)

Installation of ladder type cable tray of following size fabricated out of 2.5mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dip galvanized, single length not less than 2.5mtr with two coupling/ joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment

300 mm (W), 100 mm (SH)

150 mm (W), 100 mm (SH)

Supply and Installation of pregalvanised steel junction box of size 100mm x 100 mm x 50 mm and Thickness 1.6 mm with terminal blocks of size suitable for terminating 2 Nos of 3Cx 2.5 Sq. mm copper conductor

Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade B0 for cable tray supports, base frames for panels, anchor fasteners, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding, wire brush cleaning, supply of all consumables like gas, welding rods. After fabrication two coats of epoxy based primer and two coats of finish paint shall be applied

Supply of Power Cables upto working voltage 1.1 kV as per BIS: 7098 ( Part - 1 ) - 1998

Power cable (A2XWY (P)) of size 3.5C x 35 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power Cable (2XWY (P)) of size 3C x 2.5 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 ( P ) and ST2 (Y), 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power cable (2XWY (P)) of size 4C x 4 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power cable (2XWY (P)) of size 3C x 16 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

3C x 1.5 Sq.mm, copper conductor, multistranded, PVC insulated unarmoured flexible cable

Power cable (A2XWY (P)) of size 3.5C x 70 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

6.35/11kV( E ), 3C x 400 Sq. mm, XLPE insulated Aluminium Conductor cable suitable for 6.6kV resistance earthed system as per IS 7098( Part - 2 ) and technical specification

Power cable (A2XWY (P)) of size 3C x 120 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Laying and Dressing of Power cables over cable trays

Power cable (A2XWY (P)) of size 3.5C x 35 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power Cable (2XWY (P)) of size 3C x 2.5 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 ( P ) and ST2 (Y), 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power cable (2XWY (P)) of size 4C x 4 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power cable (2XWY (P)) of size 3C x 16 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

3C x 1.5 Sq.mm, copper conductor, multistranded, PVC insulated unarmoured flexible cable

Power cable (A2XWY (P)) of size 3.5C C x 400 Sq. mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Power cable (A2XWY (P)) of size 3.5C x 70 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

6.35/11kV( E ), 3C x 400 Sq. mm, XLPE insulated Aluminium Conductor cable suitable for 6.6kV resistance earthed system as per IS 7098( Part - 2 ) and technical specification

Power cable (A2XWY (P)) of size 3C x 120 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLS of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988

Supply of weather proof, Brass, double compression type cable glands suitable for cable of following sizes

3.5C x 35 sq. mm, multistranded round wire armoured, XLPE insulated, aluminium conductor

3C x 2.5 sq. mm, multistranded round wire armoured, PVC insulated, copper conductor

4C x 4 sq. mm, multistranded round wire armoured, XLPE insulated, copper conductor

3C x 16 Sq mm, multistranded round wire armoured, XLPE insluated copper conductor

3.5C x 70 Sq. mm, multistranded, round wire armoured, XLPE insulated aluminium conductor

3.5C x 400 Sq. mm, multistranded, round wire armoured, XLPE insulated aluminium conductor

3C x 120 Sq. mm, multistranded, round wire armoured, XLPE insulated aluminium conductor

3C x 400 Sq. mm, multistranded, round wire armoured, XLPE insulated aluminium conductor

Supply of Aluminium and copper Lugs suitable for cable / Conductor of following sizes

3.5C x 35 Sq. mm, Aluminium

3C x 2.5 Sq. mm ( Pin type ), copper

4C x 4 Sq. mm ( Pin type ), copper

3C x 16 Sq. mm, Copper

3.5C x 70 Sq. mm, (Al)

3.5C x 400 Sq. mm, Long barrel ring type(Al)

3C x 120 Sq. mm ( Al )

3C x 400 Sq. mm, Long barrel ring type ( Al )

Glanding and End Termination of power and control cable of following sizes

3.5C x 35 Sq. mm

3C x 2.5 Sq. mm

4C x 4 Sq. mm

3C x 16 Sq. mm

3.5C x 70 Sq. mm, (Al)

3.5C x 400 Sq. mm

3C x 120 Sq. mm ( Al )

3C x 400 Sq. mm

Excavation in all type of soils of width as specified in the technicals specifications as per the size and the no of runs and a depth of 1000 mm below ground level, sand bedding, laying of baked bricks on side and top, back filling, dewatering, consolidation shoring, disposal of excess earth. Item includes Supply of Manufactured sand and class - 1 bricks

Supply and Assembling of Fibre glass reinforced Plastic telescopic tilting ladder with Type IA duty rating of height 25 feet as per the attached technical specification

Supply and Installation of Vertical Air termination of length 1mtr, 25mm dia Copper rod with 5 Nos of spikes as per the attached technical specification and attached drawing

Konstelec Engineers Pvt. Ltd.

SARASWAT ENGINEERING SERVICES

Yogiraj Powertech Pvt Ltd.