ward no. 52 me Dadabadi school ke pass park, Dadabadi bada park, panchmukhi darbar ke samne park, moxdham park va vibhinn vikas karya

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

SADHANA CONSTRUCTION (GSTN-NA) BID ID -3086477

SHREE LAXMI CONSTRUCTION (GSTN-NA) BID ID -3085295

Description of Work / Item(s)

Amount

Construction of Hut/Gajebo/ as per following and enclosed photograph circular platform at ground level goving overall dia not less then 4.60 mtr with 1.5 mtr. Width in annular shape footpath- plinthlevel area 17 sqm (Dai of circulat paltform not less than4.66 mtr) plinth geight 0.60 mtr From Ground level shouldbe in three Equal steps having rise 15 cm with on side gentle slope ramp having width 1.0 mtr and with and with side reling- Ist roof level height shoulb be notless then 3 mtr from plinth level total covered area of Ist roof level not less than 21.50 sqm- Roof should be made in frustum of cone shape having frustum height 0.60 mtr and thickness of roof slab should not be less than0.125 mtr 2nd roof shoulbe be made not less than 2.0 mtr dia at vottom with 0.60 mtr cone geight at center difference of level between both roof should be not less than 1 mtr with 6 noc RCC (m-20) circular columan gaving dia 0.23 mtr with required reinforcement from plnth level of support Ist roof levle having load bearing capacity of both roofs with required foundation the hut shoulb be faciliated with 12 No. Round sitting bench of 0.45 mtr width and 0.10 mte thick should be made in RCCof M-20 RCC work should be complet in M-20 with required reinforcement (Not less then minimum) as per relevant look of wooden finishing with ornamental plaster in rich mortar using while cement oxide color and banboo/Ball Design with Fianl finished intouchwood color (two or more coats) as per photograph enclosed with giving asthetic look . The job work should be bomplete as per direction of engineer incharege and upto satisfaction of engineer incharge.

Making ornamental ralling as per following speciication design. 2 Nos. vertical pole should be made in 1.0 mtr. Distance and 1.0 mtr. Height and also of 100mm thickness 2 nos cross pole shoule be made as per above specification 4 Nos 8 mm size brs should be used.

Air Walker : The Air Walker made from “B” class Gi pipe. The center pipe is of 80mm NB made from “B” class GI pipe. The leg movement frame is of 40mm NB made from “B” class GI pipe. The handle frame is of 25mm NB made from “B” class GI pipe. The bent M.S. plate is used to join the center pipe & leg movement frame is of 8mm thickness. The foundation is provided by in built hole pass. The footrests is made from Aluminium casting material, its sizes are 0mm*300mm*5mm. For the support 50*50mm*2mm CRC square pipe is used. Closing caps is made from top quality FRP material with 2mm thickness. The pins used are made up of 25mm diameter bright bar. The bearings used are “6205” permanent lubricated sealed bearings of reputed make. The nut bolts used for assembly are made from S.S. material. The circlips used for ssembly are of 25mm diameter. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Standing & Sitting Twister: The Seating & Standing Twister made from “B” class GI pipe. The center pipe is of 100mm NB made from “B” class GI round pipe, and The bottom support of M.S. round plate of 250mm abd 10mm thickness is welded at bottom. The standing frame of seating twister is of 25mm NB, 32mm NB made from “B” class GI pipe. The handle frame of seating & standing twister is 32mm. The foundation used for fixing is consists of three equal items i.e. 90mm made from “B” class GI pipe, M.S. round plate of 250mm &10mm thickness & 25mm*25mm*3mm M.S. angle. The round plates 300mm*10mm thickness M.S material. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25 mm low carbon steel material. The bearings used are of “6205zz”, “6007zz” permanent lubricated sealed earings of reputed make (FAG/SKF). High tensile steel with galvanized nut bolts are used for assembly. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Arm & paddle Bike:Arm and Paddle Bike made from “B” class GI pipe. The center pipe is of 40mm NB made from “B” class GI pipe. The handle is made up of casted iron material with plastic holding grips. For foundation hole pass provision is provided. The footrests is made from aluminium casting material, its sizes are 130mm*300mm & 3mm thickness. For paddle Diameter 300mm with 8mm thickness M.S. plate is used. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm iameter harden low carbon steel. The bearing used is of “6205” permanent lubricated sealed bearing. The nut bolts used for assembly are made from S.S material. The powder coat is done by pure polyester powder with 60 to 70 micron thickness.

Back Extension:The Back Extension made from “B” Class GI pipe. The main frame of 60mm made from “B” Class GI pipe, and the footrest frame is of 32mm made from “B” class GI pipe. The Handle frame is of 32mm made from “B” Class GI pipe. The seats is fitting on the frame is made up of high quality FRP material of size 330mm*300mm of thickness is 3mm & M.S plate of thickness 3mm and size 250mm*200mm is used to support it. The foundation used for fixing is consist of 25mm*25mm M.S. angle of 3mm thickness. The footrests is made from aluminium casting material, its sizes are 130mm* 310mm*5mm. For the support 32mm made from “B” class GI pipe. Closing caps made from top quality FRP material with 2mm thickness. The powder coat is done by pure polyester with 60 to 70 micron thickness.

Chest Press:Seated Puller Equipment is made from “B” class GI pipe. The center pipe is of 100mm NB made from “B” class GI pipe with M.S. round Plate of 250mm diameter & 10mm thickness is welded at bottom. The remaining frame is made up of 25mm NB and 32mm NB “B” class GI pipe. Handle frame is of 32 NB “B” class GI pipe. The seat frame is of 32mm NB “B” class GI pipe, for the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 50mm solid bar is used. The foundation support made up of three equal items i.e. 100mm NB made from “B” class GI pipe, M.S. Round plate of 250mm diameter and 10mm thickness & 25mm*25mm*3mm M.S Angle. The seats are made of high quality FRP material of size 330mm*330mm of thickness 3mm & M.S plate of size 250mm*200mm*3mm is used to support it. Closing caps made from high quality FRP material which is of 2mm thickness. The pins used are made up of 17mm diameter solid bar. The bearing used are of “6203” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pregalvanised material. The circlip used for assembly are of 17mm diameter. The powder coat is done by pure polyester powder with 60 to 70 micron thickness

SHREE LAXMI CONSTRUCTION (BID ID -3085295)

SHREE LAXMI CONSTRUCTION (BID ID -3085295)

SHREE LAXMI CONSTRUCTION (BID ID -3085295)