Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹49.7 L+₹1.7 L (3.64%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹49.8 L+₹1.9 L (4.00%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹50.0 L+₹2.1 L (4.30%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹50.0 L+₹2.1 L (4.39%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
19 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
CERTAIN MINOR AND SANCTIONED WORKS IN DMRL, DLRL, DOIP, ASL CHESS SFLE UNDER GE (I) RND KANCHANBAGH HYDERABAD
2024_MES_648377_1
8753/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
Hyderabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹96,000
Yes
6 Jul 2024
29 Mar 2024
22 Apr 2024
29 Mar 2024
19 Apr 2024
12 Apr 2024
29 Mar 2024 - 5 Apr 2024
Amount
M&L for 75mm thick PCC as in sub base 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) including demolition of old concrete along with old tiles with sreed complete all as specified and directed.
M&L for Kota stone slab flooring over 20 mm thick screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.
M&L for Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
M&L for 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as directed by Engineer-in-charge.
M&L for Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) as directed by Engineer-in-charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) complete all as specified and directed.
M&L for MS Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position, in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works and applying a priming coat of approved steel primer using structural steel etc. as required all as specified.
MS work Hot finished welded type tubes in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc., complete all as specified and directed by Engr-in-Charge.
M&L painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/wall cladding etc, fixed with self tapping screws of any description complete all as specified
S&F Plain, galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 of any description complete all as specified.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil complete all as specified and directed.
M&L for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with dark shade pigment using ordinary cement to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: In 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
Providing and laying Polished Granite stone flooring Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed.
Demolition of stone masonary built in cement mortar including all quoins, arches, pillars, copings etc, complete all as specified and directed by Engineer-in-Charge.
M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:6), complete all as specified and directed by Engineer-in-Charge.
Complete as per item No. , but except stone complete all as specified and directed by Engineer-in-Charge.
Extra over Granite stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm complete all as specified and directed by Engineer-in-Charge.
Providing flush pointing to Random rubble masonary in CM (1:4), complete all as specified and directed by Engineer-in-Charge.
M & L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in coping, benching etc including necessary form work complete all as directed.
Framed brackets of angles or tees with web and flanges cut to, shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil
M&L Reinforced concrete pipes, class NP3, laid and jointed complete with collars 450 mm dia complete all as specified and directed by Engineer-in-Charge.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 inculding demolition of existing brick work complete all as specified and directed by Engineer-in-Charge.
M&L Cement concrete in 1:4:8 type D2 in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&l Providing, cement concrete 1:2:4 Type B1 in roof kerbs or mud stops, rounded or chamfered on edges , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L Concrete in 1:3:6 type C2 bed to drain pipes including packing under and completely surrounding pipes haunching with concrete after they are laid and tested; in 450 mm hume pipes
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.
M&L 3 coats of white wash on newly plastered surface including preparation etc. complete
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in hard/dense soil
M&L Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base 100 mm thick complete all as specified and directed by Engineer-in-Charge.
Supply & Fix sub main wiring with 2 run of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including one run of 4 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
Supply and fixing single pole sheet metal enclosure (20 Amps) with a two pin and earth plug and socket complete with one single pole MCB 25/32 Amps (240V) including removing the unserviceable sheet metal enclosure complete all as directed Make:- Legrand/Havells/ C&S / L&Tor its equivallent.
Supply and install inverter type hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ionizer and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2 TR with brackets and including with all connections as per site requirement complete. Model No.LS24I5FWXXX (for 2 Ton Model).
Supply and install inverter type hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ionizer and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR with brackets and including with all connections as per site requirement complete. Make : Voltas/Blue star/Daikin/Lloyd Model No.LS24I5FWXXX (for 1.5 Ton Model).
Supply and fix Voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4KVA
Supply and fix Voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5KVA
Supply & Fix sub main wiring with 2 run of 4 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including one run of 4 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
S&F in walls/roofs PVC Pipe 20 mm heavy duty for Condensing water line including making provision for fixing.
S&F in walls/roofs PVC Pipe 40 mm heavy duty for Condensing water line including fittings and making provision for fixing.
M&L for insulation only to copper tubing of split type AC of cap 1.5 TR/2.0 TR with heavy duty rubber foam insulation as per existing density and thermal conductivity including packing material, reflactor tape and pvc tie complete all as specified and directed. Make- Armaflex / Aeroflex / Thermobreak
S&F flexible type water drain out pipe suitable for indoor unit of split AC as per existing type/model complete all as specified and directed.
Supply only Copper pipes 1/4 to 1/2" dia, duly insulated with synthetic felt tube, for split / window type Airconditioner / refrigerator / water cooler including braking complete with taking out old unserviceable one
All as per item No 10 above but of size 3/8 to 5/8" dia
Supply only in replacement Brass flair nuts 1/2 to1/4" including taking out old unserviceable one.
All as per item No. above but of size 3/8 to 5/8" dia
Supply and fixing of AC Timer Change over switch for ACs installed at server /equipement room complete all as specified and as directed. Make : Dynamic, Model DIGI 2017
M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 4.0 sq mm Make:- Plaza/Polycab/Havells/Finolex
M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 2.5 sq mm Make:- Plaza/Polycab/Havells/Finolex
M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 4.0 sq mm Make:- Plaza/Polycab/Havells/Finolex
M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 2.5 sq mm Make:- Plaza/Polycab/Havells/Finolex
Excavation in Trenches for laying of GI tubing etc, getting out in soft/loose soil n.exc 1.5m wide and n.exc 1.5 depth complete all as specifited and directed.
M&L returning filling in trenches including spreading, leveling, watering and in layers n.exc 25 cms thick without damaging pipe/special fittings as in any type of soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Supply and laying in trenches steel water tubing galvanised medium grade and connection including like tee, bend, Socket, Elbow, short pieces connectors, plugs and unions etc, cutting threading the following sizes including taking down/up existing GI pipe all as specified and directed.
100 MM dia
50 MM dia
40 MM dia
25 MM dia
20 MM dia
S&F CPVC pipes SDR 11 & plain CPVC SDR 11 fitting in trencher/ floor of following sizes including taking down old GI pipe complete all as specified and directed.
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
100 mm dia
Supply and fix gun metal gate valve (ISI) marked with iron wheel head screwed both ends for iron pipe suitable for following bore of pipe including taking down old existing gate valve complete all as specified and directed.
50 mm bore pipe
40 mm bore pipe
25 mm bore pipe
20 mm bore pipe
15 mm bore pipe
Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for making good disturbed surface rod /payments/foot paths etc, complete all as specified and directed.
Taking down old defective non return valve and fix new CI foot valve heavy duty 50 mm dia with confirming IS-4038 of following size complete all as specified and directed.
Taking down old defective non return valve supply and fix new valve 50 mm dia with by pass arrangement working pressure 10 kg per sqmm confirming to IS-5312 including joining by means of rubber gasket 3 mm thick, MS nut bolt, washers complete all as specified and as directed.
Taking down the defective centrifugal pump and motor of 415 voltas 3 phase by dismantling the electrical connections removing the motor from bed by decoupling with pump transporting to workshop, dismantling it completely, removing the burnt out winding rewinding the same with super enameled copper wire of same back to site and with transporting with the pump necessary insulating material,warnishing backing and re- assembling the motor completly with all connections complete all as specified and directed for following capacity. Note:- (i) burnt out removed wire shall be property of contractor through schedule of credit.
Electric Motor 5 HP
Electric motor 3 HP
Servcing/ overhauling of centrifugal pump set by dismantling completely and replacing unservicable ball bearing, shaft sleeve, gland nack ring gland rope nut and belts etc, assembling back the complete pump and fixing alignment to the original position and coupling with pump and necessary alignment etc including scraping complete, testing and commissioning complete all as specified and directed. Note:- (i) Spares shall be measured and paid separatly under relavent items. (ii) Painting and writting the MES number with existing size eleemed to be included in the rated quoted. (a) Maintenance schedule :- (i) Checking for looseness of all the foundation and coupling nuts/bolts and rectification. (ii) Checking for proper functioning of all the voltmeter,Ammeter,starter, contactor etc and rectification. (iii) Checking for proper functioning of suction and discharge pressure gauges and rectification. (iv) Checking for leakage in gland packing,shifting base bushes sluice valves,gate valves etc and rectification. (v) Checking for any undue noise of motor pump and rectification. (b) Maintenance schedule :- (i) Checking for prope aligment and rectification. (ii) Checking for proper lubrication in bearing and lubrication. (iii) Checking all electrical panel using for pumping for cleanlines and rectification for any looseness burnt redressing etc,
S&F in repairs of the following DOL/star delta starter complete all as specified and as directed. Make :- L&T/ Havells /Seimens
DOL starter 3 phase suitable for 5 HP
Star delta starter suitable for 3 HP motor
Material and labour for spray painting of motor/pump, two coat enameled paint before one coat of red oxide paint including scraping and writing MES/Sm No complete all as specified and directed of the following capacities
Material and labour for taking up submersible pump set 5HP from bore well, 3 -phase 415 v, 50 Hz,AC, opening the motor,cutting and removing the burnt windings, cleaning the starter and rotor with cleaning agent. Rewinding the motor with approprlate gauge of super enameled copper wire of approved make insulating the winding with same class of insulation complete all as specified and directed.
Supply only alum granules of 25 Kilogram bags all as specified and suitable for drinking water purpose complete all as specified and as directed.
Painting to water supply pipe line of 50/40 mm bore from pump to sump and on OH tank and preparation of surface by scraping dust cleaning with brush and applying two coat of synthetic enamel paint of approved colour and forming the arrow showing direction of water flow complete all as specified and directed.
S&F stainless steel name sign board made out of wide angle cub corner micro prismatic grade sheeting type XI retro reflective and fixed over 2 mm thick aluminium sheet and back support fame of 25x25x3mm angle frame supported by 380D stainless steel pipe stainless vertical post grade 304 of size 900x600 mm (2 No's vertical post height of 2 mtr above GL) including letters writting both sides, necessary required PCC of size 600x600x600mm and including suitable LED light fitting all as specified and directed
S&F pressure pump motor, single phase, 230 volts, 50 Hz, of capacity 0.75 HP heavy duty complete of pressure pumps & system Model no 100B pressurejet including making connections complete all as specified and and directed. Make: Crompton / Havells/ KSP/ Shakti
M&L removing air look in entire pipe line with help of required tools all as specified and directed.
CSR CONSTRUCTIONS
PVRCS ENGINEERS
KR PADMAVATHI CONSTRUCTIONS
SRI SAI SIVA CONSTRUCTIONS
Anjana corporation
SUN LIGHT HOUSE
Bismi Engineering
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .