Miscellaneous Civil Work at MURP Colony

Amount

Earth work in excavation ( exceeding 30cm in depth 1.5 Mtr. in width or 10 Sq.m. on plan ) by mech/manual means including dressing of sides and ramming of bottoms, lift upto 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr. All kinds of soil

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.5m: All kinds of soil

Cleaning Jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth upto 30cm. Measured at a height of 1 m above ground level and removal of rubbish upto a distance of 2KM out side the periphery of the area cleared by your own vehicle.

Providing and laying in position Plain cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse : 6 Graded stone aggregates 20 mm nominal size) excluding the cost of centering, shuttering in foundation, footings, and bases of column as per specifications and drawings and direction of Engineer in charge.

White washing with lime to give an even shade : New work (three or more coats).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level .Grade:-1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work above plinth level .Grade:-1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying for Fixing steel reinforcement for reinforced cement Concrete work including transporting , decoiling, straightening, cutting, derusting bending, placing in position at all height and binding with binding wire etc. complete as per drawing, specification and instruction of the Engineer-in-charge.

Brick work with bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 Cement : 6 Coarse sand) .

Brick work with bricks of class designation 75 in superstructure with cement mortar 1:6 (1 cement : 6 course sand) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the Engineer-in-charge.

12 mm cement plaster of mix : 1: 6 (1 cement : 6 coarse sand ).

Providing neat cement punning about 1.5mm thick in wall, dado, window sills, plinth etc. and like at any level to anywhere as directed and specified by the Engineer-in-charge.

Removing white or color wash snowcem/distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with waterproofing cement paint of approved brand and manufacture and of required shade to give an even shade.New work (three or more coats)

Half brick masonry with bricks of class designation 75 in super structure above plinth level upto floor V Level.Cement mortar 1:4 (1 cement: 4 course sand).

Supplying and Painting with synthetic enamel paint/ aluminum paint of approved brand and manufacture Two or more coats in new work..Two or more coats in new work.

Demolishing of Cement conc. including disposal of material within 50m lead.1:3:6 or Richer Mix

Dismantling of old brick work including stacking of serviceable material and disposal of unserviceable material within 50m lead.In cement mortar.

Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.

Providing and fixing ridges and hips in fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. a) Corrugated serrated adjustable ridges

Dismantling of old plaster or skirting raking out joints and cleaning the surface of plaster including disposal of rubbish to the dumping yard with 50 mtr. lead.

Providing and laying for 40mm thick Cement concrete in flooring, in ratio 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate) finished with a floating coats of neat cement including cement slurry, but excluding the cost of nosing of steps etc.

Grading of roof for water proofing treatment with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12mm nominal size) mix with Sika Top Seal and Sikadur 32 in appropriate proportion.

Providing and laying for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (Internal work) free of cost.

a)15mm dia Nominal bore

a)20mm dia Nominal bore

Providing and manufacturing of M.S. door frame of standard specified section with M.S. cleat and making necessary holes for tower bolts and sliding bolts with 40 x 6mm M.S. hold faste of standard length and section and of required nos. including supplying, fixing up in position with wooden plug of 100mm x 115mm x 100mm and cement concrete block 15 x 10 x 10Cm size 1:3:6 ( 1 cement : 3 coarse sand : 6 graded aggregate) with necessary holes complete with a coat of approved primer as per direction of Engineer-in-charge. Including the cost of M.S.angle Including the cost of cement

Providing and laying Hire and labour rate for fixing centering shuttering for concrete works to anywhere at any level (including staging) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the Engineer-in-charge.(Material for shuttering to supplied by the contractor)

a)Suspended floors, roofs, landings, balconies and access Platform.

b)lintels Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying for finishing walls with Advanced Anti Alagal Weather Proof Emulsion Paint Brand:-APEX ULTIMA (Make:-Asian Paints) approved brand and manufacture and of required shade to give an even shade over 2(Two) coats professional primerwater thinnable(Make:-Asian Paints E7). Consumption rate2.50litre/ Sq.m.New work (three or more coats)

Providing and fixing factory made solid core, commercial flush door shutters non-decorative type, core of block board construction with well seasoned chemically treated timber of moisture content, not exceeding 12 per cent and side styles, top and bottom rails of main width as per I.S. Code, well seasoned hard wood chemically treated and well matched commercial ply veneering with vertical grains on cross bends on both faces of shutters, hot pressed and banded with phenol formaldehyde synthetic resin conforming to I.S./ 2202 (part –I) / 1930.

a) 35mm thick shutter with 100mm oxidized S.S. butt hinges with necessary screws for double or single leaf shutters complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.m including cutting the patches in proper shape, raking out joints and preparing and plastering( 1 :4 ) the surface of the walls complete shade including cost of all materials, labours, scaffolding, tools and tackles , disposal of rubbish to the dump yard with in 50 M lead excluding the cost of cement.

Providing and fixing 32 mm dia. P.V.C. flexible waste pipes for sinks and wash basins.

Providing and fixing heavy duty C.P brass bib cock of 15mm nominal bore as per approved sample (Brand:-Jaquar).

Providing and fixing heavy duty C.P brass stop cock (concealed) of 15mm nominal bore as per approved sample. (Brand:-Jaquar).

Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.

Providing and placing on terrace polyethylene water storage tank ISI: 12701 with cover and suitable locking arrangement and making necessary holes for inlet and outlets and overflow pipe but without fittings and base supports for tank.

Providing and fixing anodized aluminum tower bolt including necessary screws etc. complete.250 X 10mm

Providing and fixing anodized aluminum door handle including necessary screws etc. complete.a) 125mm

Providing and fixing anodized aluminum hanging floor door stopper (twin robber) with necessary screw etc. complete.

Providing and fixing aluminum. (Heavy type) sliding door bolts with nuts and screws etc. complete.a) 300 x 16mm

Providing and fixing anodized aluminum tower bolt (Heavy type) including necessary screws etc. complete. 150 X 10mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing bright finished brass casement window fasteners of minimum weight 200 grams to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing of glass panes, with putty and nails wherever necessary: Glass panes 4mm thick.

Providing and fixing bright finished brass peg stays 300mm long of minimum weight 330 grams. to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing soil, waste and vent pipes : 100 mm dia

Brick on edge flooring with bricks of class designation 7.5 on a bed of12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing heavy duty brass bib cock of approved sample. 15mm dia

Providing and fixing heavy duty brass stop cock of approved sample. 15mm dia

Providing and fixing heavy duty brass gate valve of approved brand with C.I. wheel. 25.mm dia

Lettering (minimum height 50 to 100 mm ) with approved brand blacked paint with white/ cream painted base.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. a) 10 lite capacity - white

VARUN ENTERPRISES

M/S AVINASH KUMAR

M/S. P.B ENTERPRISES

M/S A K ENTERPRISES

M/S SOLOCHANA ENTERPRISES