CONVERSION OF CONVENTIONAL LIGHTS INTO LED LIGHTS AT AF STN AGRA

Amount

Taking down carefully Aluminium/copper/flame proof point wiring(Light/Fan/Socket or power) complete incl fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making god disturbed surface of wall/ceiling etc., alla s specified and directed.

Taking down hangar light/Security light by disconnecting the electric supply all as directed at site.

Taking down main switch/MCB DB/AC enclosure/Three phase enclosure by disconnecting the electric supply all as directed at site.

Taking down old U/S sub main wiring aluminium/copper including batten/conduit and making good disturbed surface to match the existing surface.

Excavation in trenches n.exc 1.5m in depth and not exc 1.5m wide for laying of UG cables etc and getting out in soft /loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply & laying sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23cm (8cm under the cable & 15cm over the cable) and gently punned down to 18 cm thickness complete all as specified and directed. Note: Only punned down thickness to be measured and paid.

Supply and laying bricks(old size) for cable protection by using common burnt clay building bricks, sub-class 'B' designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks complete all as specified and directed.

S&F GI tubing light grade 40mm dia for protection of cable on wall, road crossing, floor etc complete all as specufied and directed by the Engr-in-Charge.

M&L for point wiring for hangar light complete with stranded coper conductor 2.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including steel conduit ISI marked not less than 20mm dia with including 2.5 Sqmm stranded copper conductor PVC insulated cable of green colour as earthg continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed for following:- (a) Two hangar light controlled by one MCB SP. Note:- (i) Average length of point wiirng for hangar lights is approximately 35 RM. (ii) The working height for Hangars Lights is Appx 21 mtrs abve ground level. Cost of Scafolding and other T&P shall deemed to be included in the unit rate quoted. No extra charge shall be paid for this purpose.

S&F 45 watt LED road way light fitting luminaires made up of pressure die cast housing with toughened glass and high power LED's with option of secondary optic with IP-65/IP-66 protection. Make:- Crompton Cat Part No LSTS-45-CDL-M/ Bajaj Cat part no. BRTFG-45LEDI/ Havells Cat part no. ENDUARAPEARLNEOSL45WLED757PASYTOPC.

S&F LED highbay light fitting of 150 watt complete with very high efficiency round highbay in PDC housing suitable for industrial application . Ingress protection of IP-65, complete all as specified and directed. Make:- Crompton Cat Part No CIP-320-150-57-60D-HL4-GL-NSR/ Bajaj Cat part no. BGPPH150LED/ Havells Cat part no. SAUCERPLUS HBP 150WLED85790 DTOLTG.

S&F LED flood light fitting of 150 watt with new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium housing IP-65 roadway luminaire with high power LED of capacity 150 Watt and fixed on walls/truss all as specified and directed. Make:- Crompton Cat Part No -LFLN-150-CDL/60-M/ Bajaj Cat part No. BJFL150WLEDI Havells Cat part No. JETAIRISFLS150WLED757PSYMLTG.

S&F LED flood light fitting of 250 watt complete with energy saving, environment friendly & robust open type verticle Highway/mediumbay LED luminaire with high power LED of 250/255 watt LED IP-65 luminaire, complete all as specified and directed. Make:- Crompton Cat Part No LSFO-250-CDL/60-M/ Philips Cat Part No: BVP410 LED 250 CW HE NB FG S4 XTFCL/ Wipro Cat Part No. LF 20-342-060-57-G2.

S&F LED flood light fitting of 350 watt complete with energy saving, environment friendly & robust open type verticle Highway/mediumbay LED luminaire with high power Decrete LED of 350 watt LED IP-65/IP-66 luminaire, complete all as specified and directed. Make:- Crompton Cat No LSFO-350-CDL/60-M/ Bajaj Cat Part No. BJFL 350 W LED / Havells Cat Part No. JETAVALOURFL350W3MLED757MODNBLTG with suitable control gear.

M&L for Sub main wiring complete with stranded copper conductor 2.5 Sqmm size (Nominal Area) PVC insulated unsheathed cable FRLS drawn in and including steel conduit ISI marked not less than 20mm dia including 2.5Sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitiing/fixtures, complete with all ccessories all as specified and directed. Note:- (For Item No. 12 to 18) The working height for Hangars Lights is Appx 21 mtrs above ground level. Cost of Scafolding and other T&P shall deemed to be included in the unit rate quoted. No extra charge shall be paid for this purpose.

Supply, laying and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core and laid in trenches/passing through pipe/ducts or on pole with fixing arrangement complete all as specified and directed.

Supply, laying and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core and laid in trenches/passing through pipe/ducts or on pole with fixing arrangement complete all as specified and directed.

Supply, laying and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core and laid in trenches/passing through pipe/ducts or on pole with fixing arrangement complete all as specified and directed.

S&F MCB TPN DB, 4 way vertical type, 440V, 3 phase with rated busbar 250 Amps, double door type suitable for MCCB as a incomer and MCB's as outgoing double door type, grouted in walls with fixing arrangements complete all as specified and directed. Make-Legrand Cat No.5077 50 or equivalent in L&T/ Schneider.

M&L for MCB DB of sheet metal enclosure double door type with IP-43 Protection, single pole and neutral 8 way with 100 Amp rated bus bar 240V and with fixing arrangements complete all as specified and directed. Make: Legrand/ L&T/ Schneider

M&L for MCB DB of sheet metal enclosure double door type with IP-43 Protection, single pole and neutral 4 way with 200 Amp rated bus bar 240V and with fixing arrangements complete all as specified and directed. Make: Legrand/ L&T/ Schneider

S&F MCB SP 6 to 32 Amp 240 Volts 'B' series 10 KA. Make : Legrand/L&T/ Schneider

S&F MCB SPN 40 to 63 Amp 240 Volts 'B' series 10 KA. Make : Legrand/C&S/Havells.

S&F MCCB DPX 160 thermal magnetic of 63 Amps 4 pole 16KA, 415 Volts 50 Hz complete including connecting all incoming and outgoing connection by means of suitable size of lugs/thimbles all as specified and directed . Make: Legrand Cat No 4207 13 or equivalent in C&S/Havells.

M&L for earthing with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earthpit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 m below the normal gound level with and including provision of earth test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled and screwed with and including 3 nos 8 mm dia 25mm long hexagonal head GI screw and necessary connection complete, connected to GI wire 4mm by means of boltes, nuts, check nuts and washers of GI or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earth wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC(1:4:8) type D-2 using 40 mm graded stone aggregate, coping shall be in PCC(1:3:6) type C-1 using 20mm graded stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM(1:4), funnel with wire mesh including 40mm thick cover of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinfrced with 8mm MS deformed bar @75 mm c/c both ways, charcoal dust and common salt all as shown in electrical plate no. 03 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n.exc 50m providing connection points with MS bolts & washres as required and cnnection from earth test point to earth electrod with same GI wire alongwith protection pipe(upto a distance of 7.5 mtr is included in unit rate) and testing on completion complete all as specified and as directed.

M&L for bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed for fixing switch board, DBs etc and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

KB PROJECTS

SANJEEV ENTERPRISES

SHARDA CONSTRUCTIONS

HARI CONSTRUCTION CO.

DEORA ELECTRIC WORKS

M/S Anil Enterprises

R D Bansal

AMIT BROTHERS

garg construction company

BHARATSHAH CONSTRUCTION CO