8362-PROVN OF OUTDOOR TREATMENT SHED FOR EQUINES AT EQTN SEC, PROVN OF GENTS/LADIES TOILETS FOR CIVILIAN DEFENCE EMPLOYEES, PROVN OF MOSQUITO MESH/SCREEN FOR MOSQUITO PROOFING FOR CADETS OF OTA CHENNAI UNDER GE STM

Amount

Excavation of trenches, n.exc 1.5 wide and n.exc 1.5 in depth for foundation etc, or for shafts, well , cesspits, manholes pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft loose soil.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete

M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with fair finishes of surfaces

M&L for RCC M30 (Design mix), using 20mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for RCC M30 (Design mix), using 20mm graded aggregate in columns, pillars, piers, posts and struts all as specified and as directed by the Engineer in charge.

M&L for RCC M30 (Design mix), using 20mm graded aggregate in Roof Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed by the Engineer in charge.

M&L for RCC M30 (Design mix), using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja etc and the like all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exec 25 cm.

Removing excavated material exc. 250m but n exc. 500 m and depositing where directed

M&L for Brick work with old size fly ash bricks, straight or curved on plan exec 6m mean radius built in CM 1:6

M&L for Brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exec 6m mean radius, built in CM 1:6 all as specified and as directed by the Engineer-in-Charge.

M& L PCC (1:3:6), Type C-1, (using 20 mm graded aggregate) as coping

Cutting into existing manholes/soak well for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm internal dia pipe all as specified.

Material and Labour for reinforced concrete pipes 150mm dia class NP-2 for following dia of pipe laid and jointed complete with collars all as specified and directed.

Material and Labour for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for 150mm pipe concrete bed to drain pipes of including packing under and haunching against the sides of pipe after they are laid and tested including necessary form work for the following bore of drain complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified.

Rendering in CM 1:4, 15mm thick on fair faces of brick or cement surfaces and finished even and smooth without using extra cement.

Material and Labour for providing pre-cast cement concrete as in cover slabs for manholes and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 including necessary form work complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on external surfaces of concrete and brick masonry using water proofing compound @ 3% by the weight of cement and finished the surfaces even and smooth without using extra cement all as specified and directed.

Supply only integral waterproofing compound.

M&L for 10 mm thick cement plaster in CM 1:6 on internal surfaces of concrete and brick masonry surface and finished the surfaces even and smooth without using extra cement all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling of roof slab and finished the surfaces even and smooth without using extra cement all as specified

M & L three coat of white wash on new plastered surfaces on ceiling including preparation of new plastered surfaces all as specified.

M & L preparation of newly plastered surfaces of wall and applying two coats of cement paints over a coat of alkali resistant priming pain all as specified.

M&L for two of coats distempering walls with distemper oil emulsion, white or tinted over a coat of chalk whiting primer including preparation of new surfaces all as specified and as directed by Engr-in-Charge.

M&L for Stone Hard core, broken to gauge n exec 63 mm

M&L 75mm thick cement concrete 1:3:6 type C-1 as in plinth protection, surface finished even and smooth without using extra cement.

M & L PCC 1:4:8 type D2 (40mm graded aggregate) 100mm thick as in sub base of floors all as specified.

M&L for providing 40mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in floors and pavings etc.

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed wiring, for grouting PVC conduit of any dia (for concealing the conduit for point/sub main wiring) etc., and making good, cutting not exec 10cm girth in brick wall all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel water Tubes, `medium grade', 15 mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel water Tubes, `medium grade', 20 mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by the Engineer-in-Charge.

Supply and laying steel water Tubes, `medium grade', 25 mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed by the Engineer-in-Charge.

Material and labour for Glazed ceramic colour tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick, backing coat of cement mortar (1:4) all as specified and as directed by the Engineer-in-Charge.

M&L PVC(SWR) multi floor trap with grating including jointing with solvent cement 75mm dia

S&F 75mm dia PVC SWR pipe single socketed in any length with rubber ring joints laid on ground all as specified.

M&L PVC(SWR) bends in 75mm dia any radius

M&L Dark shade vitrified ceramic tiles, 10mm thick (square/rectangular), polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:6 all as specified and as directed by the Engineer-in-Charge.

M&L Dark shade vitrified ceramic tiles, 10mm thick (square/rectangular), polished, as skirting in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick CM 1:4 all as specified and as directed by the Engineer-in-Charge.

Material and labour Non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 and n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed of CM 1:6 all as specified and as directed by the Engineer-in-Charge.

S&F for 2nd class hard wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F for 2nd class hard wood factory made panelled shutter 40 mm thick (2 panel) with lock rail and panel of 9mm BWP. Commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed by the Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed by the Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm thick wood grain printed PVC sheet used, reinforced with MS square tube supplying & fixing in opening as per specification & drawing as shown in SSR part II complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet used to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and as directed

S&F lock grade -I, 50mm cp brass type 2 levers all as specified and directed.

M&L Plywood, 12mm thick, grade BWP, type BB (No. of ply 7), fixed with screw to timber frame work all as specified.

M&L 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

M&L Second class hard-wood in scantlings, clean sawn, timber framed and fixed

Preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer.

M&L Second class hard wood plain fillets, square, rectangular or triangular in section wrought, secured with nails or breads of sectional area not exceeding 3 sq cm , complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) shall be 30mm, complete all as specified and directed.

S&F Hasp and staple, 150mm size safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long.

S&F 100 mm size Butt hinges, type B11, cast brass, with aluminium hinge pin, bright polished and fixed.

S&F 150 mm size aluminium anodised handles, cast type

S&F 300mm long aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast aluminium alloy and fixed.

S&F vitreous china wash down water closet (pedestal pattern ) white including connecting to trap and to flushing pipe, anti syphonage pipe, trap set, including provision of lime concrete bedding and making good to floor complete all as specified and as directed by the Engineer in charge.

S&F in repair vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonage pipe, trap set, including provision of lime concrete bedding and making good to floor complete all as specified and as directed by the Engineer in charge.

S&F PVC valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed by the Engineer in charge.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified.

Supply and fix vitreous China wash basin, flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and fining in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and as directed by the Engineer-in-Charge.

Supply and fix 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and as directed by the Engineer-in-Charge.

S&F low density 32mm polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 for WHB/urinal fixed complete to wall all as specified.

S&F Pillar taps, cast copper alloy with capstan heads, chromium platted screwed down high pressure with or without lettered HOT or cold with long screwed senates and fly nuts, Screwed for iron pipe and fixed for 15mm bore dia(Fancy type)

S&F Bib cock fancy type cp screwed down screwed for iron pipe or for brass ferrule and fixed 15mm bore dia .

S&F stop valves (angle valve) cast copper alloy screwed down high pressure with butterfly handle size 15mm dia bore (fancy type)

S&F 4.80mm thick Sheet glass, ordinary quality and glazing with oil putty in square exec 0.5 sq. m in each pane

S&F brass chromium plated Tubular towel rail 20mm dia D type 60cm long between flanges.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

Supply and Fixing 500 ltrs capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm brass ball valve all as specified and as directed by the Engineer-in-Charge.

S&F vitreous china urinal half stall type complete including providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe with grating union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms)

S&F in 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F Aluminium powder coated frame made out of hallow extruded aluminium section (minimum thickness of powder coating 50 micron) for windows/ventilators with one or more rebates including louvers (movable arrangement in pair) for ventilators with locking arrangement (any number of tracks) complete all as specified and as directed & approved by Engineer-in-Charge.

S&F powder coated anodised aluminium window and ventilators shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading , screw , anodised aluminium fittings such as peg stay 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle (1no) ., complete powder coated (minimum thickness of powder coating 50 micron). as specified.

S&F Figured glass, pin headed type 4mm thick fixed to aluminium louvers in strips width not exceeding 80mm all as directed.

M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, kneelers, apex stones, bed plates, levelling course, water troughs, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including form work all as directed.

Rendering 10mm thick in 1:4 cement mortar incl WPC (3% in weight of cement) on fair faces of concrete surfaces (Note : WPC will be measured separately.)

Preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS-702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyester non woven fabric 3mm thick weighing not less than 3.8 kg / sqm laid on primed surface by torch application complete all as specified and as directed.

S&F mild steel work in tubular trusses, purlins, post, distance pieces including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 grade St-240.

M&L for preparation of new steel surface over 10 cm girth & width and applying two coats of paint synthetic enamel over a coat of red oxide primer.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-metallic rigid PVC conduit PVC conduit fittings and conduit accessories concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telephone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed.

(a) One light point controlled by one switch.

(b) One Exhaust Fan controlled by One Switch

(c) One ceiling Fan controlled by One Switch and regulator

(d) One 3 pin 5 amps switch socket on independent board.

(e) One 3 pin 5 amps switch socket on same board along with other switches.

All as per item No.93 above but with 4 sqmm copper conductor cable with 4sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as specified and as directed.

Supply and fix Wall mounted LED 20 W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver all as specified and as directed.

Supply and fixing wall mounted LED batten, Extruded aluminium housing provided efficient heat dissipation with polycarbonate diffuser with integrated electronic driver high efficacy. short circuit & voltage cut off protection, wide operating voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed.

Supply and Fix Endura PEARL 30 W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminaries with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K all as specified and as directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated bus bar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated bus bar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply & Fix MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

S & F Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals all as directed.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed

S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and directed

S & F Modular Fan step regulator, 100W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.

Supply & Fix in replacement of 1200 mm sweep ceiling fan BLDC rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COMPLETE WITH CANOPY, suitable DOWN ROD all as directed.

Supply & Fix Wall mounted fan 300mm Plastic body, Copper winding, PVC Blade, Protection for Blade etc with complete set all as per OEM/ Manufacturer List.

Supply and fixing, ventilating (HEAVY DUTY EXHAUST FAN) fans of 300 mm sweep,1400 RPM Metallic Body ,Double Ball bearing single phase including necessary addn/altn for fixing of fans including making holes wall/windows all as per site requirement and making good the disturbed surfaces , matching with the existing wall all as specified and directed. Note: Old Unserviceable Fan to deposited to MES Store

Removing surplus excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed

Supplying and laying burnt brick sub class "B" standard size for protection of cable as directed.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed.

Supply & Lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes all as specified and as directed. Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly wherever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

2 core 10 Sqmm

2 core 16 Sqmm

S&F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in trenches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete, including taking down old u/s GI tubing all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth strip 25X4 by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

J L CONSTRUCTIONS