Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹27.2 L+₹3.0 L (12.5%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹27.6 L+₹3.4 L (14.3%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹32.4 L+₹8.3 L (34.4%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹32.7 L+₹8.5 L (35.3%)Rejected-Finance SR NO 165 OPPOSITE YASH HOSPITAL DP ROAD MALWADI PUNE MAHARASHTRA 411028 | PUNE | MAHARASHTRA | 411028 | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹30.3 L
EMD Value
₹60,600
Closing Date
26 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI PRAVEEN KUMAR, IDSE
GE KHADAKWASLA
SMART PERIODICAL SERVICES TO BLDGS AND OTHER MISC WK DURING POP MAY 2023 AT ZONE A AT NDA KHADAKWASLA
2023_MES_588444_1
8692/E8
Open Tender
Civil Works
Works
60 days
GE KHADAKWASLA
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE KHADAKWASLA
₹60,600
Yes
3 May 2023
6 Apr 2023
28 Apr 2023
6 Apr 2023
26 Apr 2023
21 Apr 2023
6 Apr 2023 - 20 Apr 2023
Amount
M&L for complete removal of existing treatment on wall to make the surface from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.
All as per item No 01 above but for Ceiling surface complete all as specified and as directed.
M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.
All as per item No 3 above but for Ceiling surface complete all as specified and as directed.
M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and as directed.
All as per item No 5 above but for Ceiling surface complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
All as per item No 7 above but for Ceiling surface complete all as specified and as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
All as per item No 9 but for Ceiling surface complete all as specified and as directed.
M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.
M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
M & L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specifed and directed.
M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP all as specified and directed.
M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.
M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing ( 1st quality) etc till the surface became fine glosy finish complete all as specified and directed.
M & L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M & L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M & L for one coat of cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.
M & L for one coat of cement based paint on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.
M&L for preparing surfaces of old roof tiles (manglore tiles / taylor tiles) of pattern as specified and applying one coat of water based exterior paint with approved make complete all as specified and directed. Note : (i) Area measured flat, no addition shall be made for corrugations, offsets, etc (ii) Rates quoted are deemed to be inclusive of scaffolding required upto height of 20mtr and safety equipment reqired as per safety norms.
M&L for preparing old surfaces of floor tiles and applying One coat of protective acrylic exterior emulsion paint of approved make ( Asian : Apex floor guard or equivalent as mentioned in makes list of CA ) complete all as specified and directed.
M & L for cleaning of external stone surface of walls/ steps at any height with pressure pump with clean water and by applying one part of cleaning solution of Asian or equivalent or other reputed brand as approved ) as per manufacturer's instructions. After thoroughly cleaning the surface the loose masonry joints to be properly pointed with (1;3) cement sand mortar mixed with W.P.C. complete all as specified and directed. Note: Necessary scafolding shall deemed to be included in the quoted rate. The scafolding shall be having ease of access for inspection purpose
M&L for preparation of old treated wall surfaces and applying one coat of luster paint complete all as specified and directed.
Ditto all as per item No 25 above but in ceiling surface etc , complete all as specified and as directed.
Taking down cement plaster on brick, stone walls, etc., incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:6) on concrete wall surfaces at any height fnished even & smooth w/o using extra cement complete all as directed.
M&L for 10 mm thick rendering in CM (1:4) on concrete surface of ceilling of roof chajjas, fins, beams etc at any height, surface finished even and smooth etc, complete all as specified and directed. Note for srl item no. 29 to 31: Rates quoted are deemed to be inclusive of scaffolding required and safety equipment reqired as per safety norms.
M&L for prepration of old painted concrete surface and apply one coat of Plastic emulsion paint on walls exc 10 cm width or girth etc complete all as specified and directed Note for Item No 1 to 15 & 32 to 34 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. emulsion Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Rates quoted are deemed to be inclusive of scaffolding required and safety equipment reqired as per safety norms.(c) Stage for Preparation of surfaces shall be got approved from GE before applying the finishes.(d) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M & L for preparation of old concrete surfaces of wall and applying one coat of synthetic enamel paint on surfaces of concrete exc 10 cm width or girth complete all as specifed and directed.
Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including dismantling of existing and making drainage opening wherever required complete all as specified and directed. Note : Size and shape of kerb stone as shown at site and directed
M & L for preparation of new concrete surfaces of wall and applying two coat of synthetic enamel paint on surfaces of concrete exc 10 cm width or girth complete all as specified and directed.
Complete Removal of existing Auto line retro reflective thermoplast paint on concrete and bituminous surfaces by brushing with wire brushes for removing cacked mud etc complete all as specified and directed.
M&L for providing through special applicator machine, auto retro-reflective thermoplastic road marking paint in yellow/white, pattern of specified strip, 2.5 mm thick and exc 10 cm, centre line, stop line dashes arrow, brackets similar work on bituminous / cement concrete road surfaces as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed. Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi)
S & F in repairs, Cats eye (Road studs), white / red colour reflective type, ABC Body, with both side reflectors and fixed with Nails and as well as epoxy resin as adhesive on bituminous surface, complete all as specified and directed
S & F in repairs solar stud with solar cell LED PCS, Ni-Cd Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer instructions or complete all as specified and directed. (Charge : TATA BP SOLAR OR DARK EYE)
S & F in repair 3M Vertical roadway reflective type delinator , one sided white and red ,1/CTN all weather visibility -2 Part constructed of highly engineered plastic that employs highest grade type 11 sheeting high impact strength, robust and light weight elegent eliptical shape, etc to be fixed in PCC 1:2:4 (300 mm X 300mm X 300 mm) type B1 Using 20 mm graded stone aggregate incl necessary excavation complete all as specified and directed.
All as per item No 44 above here-in -before but except delinator etc complete all as specified and as directed.
S & F in repair of 3 mm thick aluminium composite pannel (ACP) board of any size fixed on both sides as per site requirement . ACP board fixed (incl removal of old board) on steel frame / grid with SS screw / rivet as directed. The board shall be sheated with high intensity retro reflective sheett of blue colour or as approved, computerised designed writting letter/figures in (Block, Roman,Italic style or in indian languages where required)/index hand (natural size)/arrows/stops/commas/ short lines /dashes/ hyphens /bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour ladder, shape and sizes as reqd and approved by GE . letter not exc 200 Nos each face of the ACP Board. Each face to have a boarder line of 25mm wide white /red/golden or colour as specified high intensity retro reflective sheet/tape, complete all as specified and directed
Sunil Constructions
Bharekar Construction
Harish Enterprises
M/S P D TUPE
S G Enterprises
SONU ENTERPRISES
M/S JEELANI ELECTRICALS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .