Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-Finance | L1 | Accepted-Finance Lowest bid amount | |
| 2 | L2₹43.7 L+₹1.1 L (2.62%)Rejected-Finance | L2 | Rejected-Finance not L1 | |
| 3 | Rejected-Technical 57 58 ANAND NAGAR NEAR BIRLA MANDIR VRINDRAVAN ROAD MATHURA | MATHURA | MATHURA | UTTAR PRADESH | - | Rejected-Technical Technical Bid is not found ok |
Tender Value
Refer Docs
EMD Value
₹43,000
Closing Date
25 Sept 2024, 1:00 pmClosed
SE, EDC-II, Mathura
Near Kali Mata Mandir, Cant, Mathura
Electrification works of 11 KV Line and other associate works for issuing 11 KV connections two nos. for Jal Jivan Mission Plan in the area of EDD-III, Mathura under Deposit Scheme on semi turnkey basis
2024_DVVNL_950856_3
24/EDC-II(M)/2024-25
Open Tender
Electrical Works
Turn-key
90 days
Mathura
Please see tender documents
2 documents required · 2 mandatory
₹3,540
DVVNL, Agra
₹43,000
23 Oct 2024
19 Sept 2024
25 Sept 2024
19 Sept 2024
25 Sept 2024
19 Sept 2024
Amount
Supply of following material as per RESPO Drawings/standard technical specifications.
CROSS ARM HOLDING CLAMP WITH N&B for PCC Pole
CROSS ARM HOLDING CLAMP WITH N&B for STP 11 Mtr
F bracket FOR 11 KV with Bolts & Nuts
T-Off Channel
Holding Clamps with nut & bolts
STONE PAD 300X300X75 MM
Danger Plate with Clamp & Bolt
Barbed Wire G.I.
EARTHING COMPLETE by MS Earth rod 6 SWG Earth wire
COMPLETE STAY
11 kv cable jointing kit 3x120 sq mm I/C and/or outdoor
11 KV MS Angle 65x65x6x2700 mm Bracing Set with 4 no. Clamps
MS Top Channel (125x65x2240 mm)
Dropper Channel MS 100x50x2000 mm
11 KV D.O. Fuse set
G.I. Pipe 4/6 inch dia.
Clamp for G.I. Pipe 4/6 inch dia.
MS Bolts, Nuts and Washers
Number plate
Base Angle with nut and bolts
11 kv cable jointing kit 3x185 sq mm I/C and/or outdoor
Straight through joint for 11 kV (E) 120 mm² 3 -Core A2XCEFY Compact Aluminium
Indoor type cable termination for 11 kV (E) 120 mm² 3-Core AZXCEFY Compact
Heat shrinkable Busbar insulating tape of size 50 mm x 10 meter Long
140 mm OD PN-4 PE-80 Grade UV stabilized HDPE pipe as per IS: 4984 in 6 metre
Rigid PVC pipes: Siza 110 mm OD x thickness 6.1 mm x 2.5 metre Long
Hot Dip Galvanized Earthing pipe electrode of 1.5 dia
Hot Dip Galvanised Earthing Strip of size 50 mm x 6 mm x 2500 mm long
EPOXY Compound General Purpose
Hot Dip Galvanized cable support clamps for 120 mm² to 150 mm² 3-Core Cable
6 Dia RCC half round Muffs for HT Cables
PG Clamp
Erection,installation and commissioning of 11 KV 3ø overhead lines by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.
Erection of PCC Pole 8.5 Mtr long with all accessories and painting works etc.
Erection of ST Pole 11 Mtr long with all accessories and painting works etc.
Erection of ST Pole 11 Mtr long (Stud Pole) with all accessories and painting works etc.
CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.
EARTHING COMPLETE by MS Earth rod 6 SWG Earth wire
COMPLETE STAY
CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.
Laying of ACSR Rabbit conductor on pole
Laying of ACSR DOG conductor on pole
Laying of 11 KV 3X185 SQMM XLPE CABLE on Pole
fixing/installation of 11 kv cable jointing kit 3x185 sq mm
Installation and commisioning of VCB I/C and O/G
laying and commissioning of 11 KV 3x120 sqmm xlpe cable in the available trench
11 kv cable jointing kit 3x120 sq mm I/C and/or outdoor
Chemical earthing for VCB WITH ALL RAW MATERIAL, LABOUR ETC.
Guarding of 11 KV line 30 to 50 Mtr span
Centralized and decentralized materials mentioned below :-
PCC Pole 8.5 Mtr long
ST Pole 11 Mtr long
ST Pole 11 Mtr long (Stud Pole)
11 KV "V" TYPE X-ARM
CROSS ARM HOLDING CLAMP WITH N&B for PCC Pole
CROSS ARM HOLDING CLAMP WITH N&B for STP 11 Mtr
11 KV PIN INSULTOR with Pin & Nut
11 KV Disc Insulator with Fitting
F bracket FOR 11 KV with Bolts & Nuts
T-Off Channel
Holding Clamps with nut & bolts
STONE PAD 300X300X75 MM
Danger Plate with Clamp & Bolt
Barbed Wire G.I.
Painting of Pole with RED OXIDE PAINT
CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.
EARTHING COMPLETE by MS Earth rod 6 SWG Earth wire
CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.
ACSR RABBIT CONDUCTOR
11 KV VCB I/C CTR 300/150/5A 350 MVA
11 KV VCB O/G CTR 200/100/5A 350 MVA
COMPLETE STAY
11 kv cable jointing kit 3x120 sq mm I/C and/or outdoor
11 KV XLPE Cable 3x120 sqmm
Guarding of 11 KV line 30 to 50 Mtr span
11 kv cable jointing kit 3x185 sq mm I/C and/or outdoor
11 KV XLPE Cable 3x185 sqmm (double circuit line)
ACSR DOG CONDUCTOR
Chemical earthing for VCB WITH ALL RAW MATERIAL, LABOUR ETC.
Erection,installation and commissioning of Double pole structure for overhead line by completeing following works/jobs as per RESPO Drawings/Estimate with centralized and decentralized materials.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.
Erection of Double pole structure of PCC with all accessories and painting etc.
Erection of Double pole structure of STP with all accessories and painting etc.
Erection of Double pole structure of PCC for Yard with all accessories and painting etc.
CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.
EARTHING COMPLETE by MS Earth rod 6 SWG Earth wire
COMPLETE STAY
CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.
Centralized and decentralized materials mentioned below :-
PCC Pole 8.5 Mtr long
STP 11 Mtr long
11 KV "V" TYPE X-ARM
CROSS ARM HOLDING CLAMP WITH N&B for PCC Pole
11 KV PIN INSULTOR with Pin & Nut
11 KV Disc Insulator with Fitting
F bracket FOR 11 KV with Bolts & Nuts
Holding Clamps with nut & bolts
STONE PAD 300X300X75 MM
Danger Plate with Clamp & Bolt
Barbed Wire G.I.
CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.
EARTHING COMPLETE by MS Earth rod 6 SWG Earth wire
CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.
COMPLETE STAY
11 KV MS Angle 65x65x6x2700 mm Bracing Set with 4 no. Clamps
MS Top Channel (125x65x2240 mm)
Dropper Channel MS 100x50x2000 mm
11 KV D.O. Fuse set
G.I. Pipe 4/6 inch dia.
Clamp for G.I. Pipe 4/6 inch dia.
MS Bolts, Nuts and Washers
Number plate
PG Clamp
Erection,installation and commissioning work of Metering System as per RESPO Drawings/Estimate with following centralized and decentralized materials/works.Work Includes all cartage, carriage, T&P, raw materials and any other material/work which is required for completion of said work but not mentioned in this boq/Estimate.
ST Pole 11 Mtr long
11 KV PIN INSULTOR with Pin & Nut
11 KV Disc Insulator with Fitting
STONE PAD 300X300X75 MM
Danger Plate with Clamp & Bolt
CONCREATING OF SUPPORT WITH ALL RAW MATERIAL, LABOUR ETC.
CONCREATING OF STAY WITH ALL RAW MATERIAL, LABOUR ETC.
11 kv cable jointing kit 3x120 sq mm I/C and/or outdoor
11 KV XLPE Cable 3x120 sqmm
MS Top Channel (125x65x2240 mm)
Dropper Channel MS 100x50x2000 mm
Number plate
Base Angle with nut and bolts
3 Phase 4 wire Static TVM 11 KV
11 KV PILFER PROOF METERING CUBICAL
M/S S.P. & CO
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .