REPAIR TO PARKING SHEDS, SERVANT QTRS AND BATHROOMS/ TOILETS IN OFFICES, MD/ SINGLE ACCN AND CERTAIN UNITS IN THE AREA OF B/R-I GE (EAST) DELHI CANTT-10

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each, complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.

S & F MS framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified

S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F Factory made, Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.

S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE )

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : Unit quoted rates shall deem including cost of 4 mm thcik sheet Glass, wiremesh, partical board, ACP board etc)

S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately)

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, glass and wire mesh for panels complete all as specified and as directed.

S&F aluminum anodised powder coated grill section 5 to 6 mm of square/dimond shape having picth size of mesh 75x100 mm etc complete all as directed.

M&L for 12 mm thick white color GRG (Glass Fibre Reinforced Gypsum) Semi Perforated false Ceiling Tiles, Micro Tegular & Tegular edged, Size 595mm X 595mm, Fire Resistance BS-476-4:1970 (Certified), Humidity Resistance (RH) (Certified),including necessary GI frame/ GI T , cross , wall angle etc false ceiling grid (Ceiling Suspension System) in High Quality Zinc Coated Galvanized Iron with Pre Painted Hot Pressed White G I Coil. including centre to centre Hangers 6 mm dia. G.I. rod fully threaded (upto 1000mm long) fixed to roof slabs with galvanised M-6 desh fastener 50 mm long including galvanised MS L-type level adjuster 85 x 25 x 25 x 2 mm etc including taking down on existing ceiling completed all as specified and directed.

S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp. insulation etc) or insulation boards/ slabs/ blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty complete all as specified and directed.

M & L with fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/ etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards depths 45c, to 70 cms with white laminated colour on inside and all the outer faces to be covered with glossy laminate Color as approved by GE and including paste to all exposed edge by edge Banding Tape and auto soft closing hinges including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make : Action tesa or equivalent)

S&F Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

S & F for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing and including telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S&F Stainless steel plain basket of size 445mm x 485mm x 150 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing and inclduing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S & F in repair for Hettich soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : Godrej/ Hettich and make as per approved make list and as approved by GE).

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F 5 mm thick sheet glass, ordinary quality in square exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid moulded panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed.

S&f 150mm Size aluminium anodised handle cast tyoe anodised complete all as specified directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed.

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall with finials and bracket etc complete all as specified and as directed.

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Demolition of brickwork built in cement mortar/mud mortar including all quoins,arches,pillars etc complete all as specified and directed.

M & L for Brick work with sub class ‘B’ old Size bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 built in cement mortar including all quoins, arches, pillar etc, complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding as required etc, complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding as required etc, complete all as specified and as directed.

Taking down cement or cement lime plaster, grit plaster any description on brick or stone or rcc walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for Coloured Glazed ceramic tiles size 600mm x 300mm x 7-8 mm thick, in vertical surface such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and incl 10 mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and incl 15 mm thick avg screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisecomplete all as specified and directed.

M & L for Vitrified ceramic tiles (colour & design as approved by GE) 10mm thick (square/ rectangular) polished/ matt finished 1200x60mm as in skiritng ,dados etc sedt and jointed in neat cement slurry and pointed in white or coloured cement to match complete shade of the tiles laid over and incl 15 mm thick avg screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisecomplete all as specified and directed.

M & L for Vitrified ceramic tiles (colour & design as approved by GE) 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and incl 15 mm thick avg screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisecomplete all as specified and directed.

M & L for matte ceramic tiles (colour & design as approved by GE) 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and incl 15 mm thick avg screed bed in CM 1:6, complete all as specified and directed.

M & L for Vitrified ceramic tiles (colour & design as approved by GE) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and incl 15 mm thick avg screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.

Description all as per item No 43.00 above tiles but on vertical surface such as in skirting /dado etc over and incl backing coat of 10mm thick rendering CM 1:4, complete all as specifed

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed in CM 1:4, including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

M&L in repair vitreous china wash basin white flat back including full pedestal size 615x415x200mm exluding taps waste chain and plug and procelain stopeer complete all as specified and directed make cera, hindware and jaguar

S&F in repair full pedestal patten wash hand basin size of basin including full pedestal size 630x415x200mm exluding taps waste chain and plug and procelain stopeer complete all as specified and directed make cera, hindware and jaguar

S & F in repairs Vitreous china single Piece WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Jaquar / Marc/ Kohler

S&F Stainless CP Towel Rack of Size 600x350mm fixed with SS Screws fixed in repair complete all as speciifed and directed

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDH Quotation Attached board, both side laminated and front side melamine surface, Size of Vanity box 22 inch upto 26 inch including Wash hand basin with brass waste coupling. (Design, colour and patern as approved by GE). Make : Hindware or as approved by GE

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin, base made of HDH Quotation Attached board, both side laminated and front side melamine surface, Size of Vanity box 32 inch upto 36 inch including Wash hand basin with brass waste coupling. (Design, colour and patern as approved by GE) Make : Hindware or as approved by GE

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any position description complete.

Description all as per item no 54.00 but 500 Lts, complete all as specified and directed

S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S&F in Repair Ball Vakves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for ironpipe of 20 mm bore minimum weight 210gms complete all as specified and directed

S&F in repair 15mm angle valves chromium plated fancy type cast copper alloy, polished body screwed down, high pressure, fixed to pipe steel tubing complete all as specified & directed.

S & F in repairs 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. (Make : Hindware /Jaquar or equivalent approved by GE)

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed. (Make : Hindware /Jaquar or equivalent approved by GE)

S&F in repair Brass CP Basin Single mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Hindware Cat No - F330014CP/Jaquar Cat No 167 KNB or equivalent as approved by GE

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in make of list as approved by GE

S & F in repair CP shower rose fancy type 200mm x 200mm size with 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make : Hindware /Jaquar or equivalent approved by GE)

S & F in repair Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make - Jaquar /hindware or equivalent approved by GE

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified. Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list

S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed.

S & F in repair Stainless steel Grating dome 110/125 mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) 'S' Trap/P-trap, including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls and applying wall care putty as required on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls and applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coats of distempering with 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls/ ceilling , pillars, cornices by brooming down etc and applyinga layer of wall care putty to prepare the surface even & smooth using sand paper and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush complete all as specified and directed.

M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls/ ceilling , pillars, cornices by brooming down etc and applyinga layer of wall care putty to prepare the surface even & smooth using sand paper and applying two coats of external acrlyic emulsion having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.

M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall inclduing all necessary tee /bend/ socket completed all as specified and directed (Note : Pipe work executed in shaft area upto the 10 story building also )

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall inclduing necessary bend/tee/socket complete all as specifed and directed.(Note : Pipe work executed in saft area upto the 10 story building also )

Dismantling of mild steel work of any description and in any position complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of exisiting sheet complete all as specified

Demolition of concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above ground level)

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness over 25mm thick Sand filling under floors or in foundations including watering and consolidation M-40 Grade with grey cement and pigment complete all as specified and directed

M&L for repairing of spalled concrete from RCC surfaces such as ceiling, beam, column, parapet, chajja etc in the following stages (i) Preparation of exisitng surfaces like chipping of unsound weak/loose concrete with electric hammer/manually including tapping all edges, making square shoulders of cavity etc not exceeding 50mm thickness , removal of debris complete all as specifiedRemoving plaster & finishes from all exposed / damaged portion of facia, roof projection, parapet, chajjas, over hanging slabs, columns, slabs & beams (ii) Applying rust remover cum passivator sikka rust top 100 or equivalent at the rate of 0.2kg/sqm each coat as per manufacturer instructiosn to remove rust from exisitng reinforcementRemoving visible rust along the length of reinforcement using hand tools as approved. (iii) Mixing and applying two components epoxy reisn concrete bonding coat of sikkadur(R&B)42 or equivalent at the rate of 0.4kg/sqm (mixinbg prooprtion as per manufacturer instrucuion including preparation of surface by chipping and throughly cleaning of surfaces complete whether required over new reinforcement and as directed by engineer in charge the reinforcement shalll be measured seperaterly (iv) Applying a prebatched one component polymer modiifed cementitous patch repair mortar not excedding 50 mm in layer of 15mm thick each of product sikka monotop 122 F or equivalent as per manufaacturer instruction to match the exisiting surface Note :- This item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.

M&L for Outdoor Coloured ceramic heavy duty tiles 12 to 15mm thick square/ rectangular area of each tile not exc 0.16 swn in floors etc set and jointed in neat cemenmt slurry and pointed in white or colored cement to match over and including 15mm thick screed bed in CM 1:6, including taking down existing floor finishes, complete all as specified and directed.