Renovation of Hall Nos 19 and 21 at 1st floor of NTA, NSIC-MDBP Building Okhla New Delhi

S NO DESCRIPTION DSR AMOUNT NDSR AMOUNT

2.00 SANITARY/ PLUMBING WORKS 10,164.00 2,94,854.57

3.00 WATER SUPPLY WORKS 1,17,807.35

INTERNAL DRAINAGE (SOIL, WASTE

4.00 & VENT PIPES) WORKS 68,107.00

5.00 ELECTRICAL WORKS 397990.00

8.00 LIGHTING 76640.00

B Total (DSR +MR) 37,81,774.66

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2023/MR AMOUNT

1.00 DISMANTLING & DEMOLISHING

Dismantling/cutting & repairing of the i) Gypsum Partitions, ii) False

Ceiling (Suspended Ceiling Systems), iii) Flooring (Tiles, Carpets,

Wooden Floors, etc.) Measurement unit shall be sqm. the

elements from the existing structure, including the removal of

associated frames, related components as required, and the

dismantling work shall also include:

1.01 MR-1 Disposal of Unserviceable Material: All unserviceable surplus material Sqm 150 350.00 52500.00

shall be disposed of as per site conditions, environmental guidelines,

and regulations.

Stacking of Serviceable Material: All serviceable material, including

but not limited flooring, shall be neatly stacked

within a 50-meter lead from the site, as directed by the Engineer-in-

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading,

1.02 15.60 transporting, unloading to approved municipal dumping ground or as Cum 20 263.95 5279.00

approved by Engineer-in-charge, beyond 50 m initial lead, for all leads

including all lifts involved.

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063)

Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to

Designed to conceal screws. Seamless finish. Complete with Rubber/

PVC Jointers and Gasket.

2.02 MR-3 LUXURY VINYL TILE( LVT) Supplying and fixing of 3 mm Luxury vinyl

flooring Top layer of approved design & Pattern as per architects sqm 0.00 993.65 0.00

approval & Instructions

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

2.1 11.3 stone aggregate) finished with a floating coat of neat cement, including

cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 14.00 614.20 8,598.80

Half brick masonry with common burnt clay F.P.S. (non modular) bricks

2.2 6.13 of class designation 7.5 in superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 40.00 1,123.80 44,952.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at

every third course of half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of

single or half brick wall of mix.

2.5 13.4 12 mm cement plaster of mix

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to

2.6 MR-4 15mm thick POP Punning over cement plaster in line & plumb finished SQM 50.00 301.50 15,075.00

smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying : a) First layer of slurry of

cement @ 0.488 kg /sqm mixed with water proofing cement compound

@ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water

proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed

to air cure for 4 hours followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and sealing of all joints,

corners, junctions of pipes and masonry with polymer mixed slurry.

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the

Slab Sunk or Raised Areas as a Back fill or platform. Laying should be

2.8 MR-5 done in layers with pounding done at every level to ensure a proper CUM 1.00 4,500.00 4,500.00

cavity free installation without disturbing any existing services in the

area. Cost to also include haunching for plumbing pipes.

3 PAVING AND WET WORKS

Digitally signed by AMIT

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2023/MR AMOUNT

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the manufacturer),

of approved make, in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge, in skirting, risers

of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed

Ceramic floor tiles of size 300x300 mm or more (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622,

of approved make, in all colours, shades, except White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4

Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

pointing the joints with white cement and matching pigments etc.,

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10

kg of hardener and 0.20 kg of resin per kg), including filling / grouting

and finishing complete as per direction of Engineer-in-charge.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in

different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4

3.40 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joints with white cement and matching

4 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all

height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5

4.01 12.45 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings,

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095-

(Part I) :2011 (Board with BIS certification marks)

Digitally signed by AMIT

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2023/MR AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance ≥

85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T- Grid of hot dipped all round galvanized iron section of

0.33 mm thick level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick5x32mm of length 1200

mm and secondary intermediate cross T of size 15x32 mm of length

600 mm to form grid module of size 600x600 mm suspended from

ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm

long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully

threaded hanger rod up to 1000 mm length and L-shape level adjuster

of size 85x25x2 mm, spaced at 1200 mmcentre to centre along main

‘T’. The system should rest on periphery walls /partitions with the help of

GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick

sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm

centre to centre & 40 mm long dry wall S.S. screws. The exposed

bottom portion of all T- sections used in false ceiling support system

shall be pre-painted with polyester baked paint, for all heights. The work

shall be carried out as per specifications, drawings and as per directions

of the engineer-in- charge.

26.27.2 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC

5 PARTITIONS AND WALL CLADDING

GYPSUM PARTITIONING:- Providing and fixing partition upto

ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange

36 mm and 0.50 mm thick fixed vertically within flanges of floor

and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor fastener or

metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25 mm

long dry wall screws on studs, floor and ceiling channels at the spacing

of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs

using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm),

joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire

5.03 rated Glass Reinforced Gypsum (GRG) sqm 100 2,131.10 213110

plaster board conforming to IS: 2095:

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733

and IS: 1285, fixing with dash fasteners of required dia and size,

including necessary filling up the gaps at junctions, i.e. at top, bottom

and sides with required EPDM rubber/ neoprene gasket etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap

beading for glazing / panelling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50

Providing and fixing 8 mm thick toughened glass Partition & door

shutter (Door Harware to be paid separately)

Digitally signed by AMIT

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2023/MR AMOUNT

Providing and fixing 600 mmx25 mm H Type handle for Doors approved

make and designs as per engineer in charge

Providing and fixing minimium 100 kg capacity floor spring for

Doors approved make and designs as per engineer in charge

Providing and fixing Glass door lock approved make and designs as

per engineer in charge

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of

5.1 MR-10 approved make and model all complete as per the direction of Engineer- Each 8 2065.00 16520.00

Providing and fixing 12mm thick frameless toughened glass

door shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor spring type

fixing arrangement and making necessary holes etc. for fixing required

door fittings, all complete as per direction of Engineer in charge (Door

handle, lock and stopper etc. to be paid separately)

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs

or dash fastener shall be paid for separately).

5.13 9.1.1 Second class teak wood cum 0.2 142949.7 28589.94

INSULATION- Providing and fixing thermal insulation with Resin

Bonded rock wool conforming to IS: 8183, having density 48

5.14 12.62 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to sqm 40 322.50 12900.00

wall wirh screw, rawel plug & washers and held and in position by criss

cossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

5.15 9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Door Closer:- Providing and Fixing Door Closer For Toilet Door

9.97 TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI

5.18 marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or -

dyed to required colour or shade, complete:

9.82 DOOR STOPPER:- Providing and fixing bright finished brass hanging

type floor door stopper with necessary screws, etc. complete.

13.26 Providing and applying plaster of paris putty of 2 mm thickness

5.21 over plastered surface to prepare the surface even and smooth sqm 250 262.70 65675.00

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less than 50

grams/ litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour.

13.85 Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content.

13.85.1 With ready mixed pink or grey primer on wood work (hard and soft

wood) having VOC content less than 50 grams/ litre

Digitally signed by AMIT

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2023/MR AMOUNT

BLINDS Providing & supplying of Window Blinds as per the

approved sample in required shade and style consisting, of ZEBRA

BLINDS comprising of optima screen Fabric comprising of 22%

polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18- 19/cm, having fire resistance

standard – NFPA 701- 89 small testing ISO- 5659-2 .Thetear resistance

should be complying to ISO4674 & breaking resistance – ISO 5081. The

DRIVE UNIT shall be of clutch for quick, easy and safe installation,

moulded plastic with steel spring support and inserted into the tube end.

It shall be driven by a ball chain pulley with ball chain and can be

positioned at right side or left hand side of the Shade. The Shade when

lowering or raising, shall be automatically locked in position upon

release of the ball chain by means of a built in friction lock.Universal

5.26 MR-12 clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The sqm 10 1,650.00 16500

END PLUG shall be molded of plastic witha steel location pin.The plug

shall be inserted into the tube end.(Opposite to the Drive Unit) for ease

of installation. The SUPPORT BRACKETS shall be of coated steel &

provided with covers and used in right hand or left hand positions

differentiated by the acceptance of the of the rectangular drive unit

support or the round idler plug pin.Can beinstalled (a) On Face (b)

Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm

internal diameter & skin thickness of 1mm and shall incorporate a key

way integral with the tube to accommodate the spline. The BOTTOM

RAIL shall be a Flat Bottom made up of powder coated steel. The BALL

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl,

special CRYSTAL-effect film to reproduce Sand- blasting effect on

glass with customised designs, thickness of 2 mil (0.05mm)

without adhesive & 3mil (0.8)with adhesive having minimum tensile

strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after

5.27 MR-13 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, sqm 60 2,240.00 134400

Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct

sunlight) to 15yrs (indoors) must be endorsed. Contractors payment

wouldn't be released until &

unless he/she produces orginal warranty certificate from the

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

5.29 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Digitally signed by AMIT

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. DSR 2023 DSR Rate DSR

DESCRIPTION OF ITEMS UNIT Qty Rate (Rs.) Amount (Rs)

NO. /MR (Rs.) Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china

single trap syphonic pattern having back inlet, supporting chair, wall

hung water closet complete with all internal fittings/ accessories and CP

brass flush bend (European type) water closet with seat and lid, with

C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to

W.C., C.P. brass screwed washers including cutting and making good

the walls and floors wherever required and HDPE WC pan connector

including jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I

Supply, installation, testing and commissioning of concealed cistern

including flush plate and all internal fittings/ accessories including cutting

and making good the walls and floors wherever required complete in all

Supply, installation, testing and commissioning of glazed vitreous china

wash basin with R.S. or C.I. brackets painted white, 32mm C.P. brass

waste of standard pattern , C.P brass wall flange 32 mm dia. C.P. brass

bottle trap and union 32 mm dia C.P. pipes to wall flange. complete

including cutting and making good the walls wherever required. Table

Supply, installation, testing and commissioning of 15mm C.P. brass

5 MR-4 single hole wash basin mixer without popup waste system with 450mm Each 4 6058.39 24233.56

long copper pipes and brass nut

Providing & fixing toilet paper holding including cutting and making good

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid

7 MR-6 and brackets fixed to wooden cleats with C.P. brass screws. (Model Each 4 2500.00 10000.00

Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P.

Providing & fixing beveled edge mirror 5.5mm thick of superior quality

plate glass complete with 6mm thick marine ply sheet ground fixed to

wooden cleats with CP brass screws and washerswith 40 mm wide teak

wood frame as per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long

PVC tube and wall hook CP brass wall flange

Providing & fixing, testing and commissioning of storage type electric

water heater with automatic thermostatic control electric element,

11 MR-10 pressure release valve, brackets fixed to expansion fasteners with M.S. 0.00

nuts and bolts all complete including cutting and making good the walls

wherever required.

03 litres capacity (Horizontal /Vertical type1.5 kw electrical load).

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of

approved quality.

Providing and fixing of stainless steel finish Paper Towel Dispenser

14 MR-12 having capacity of 300-350 paper towels fixed to wooden cleats with Each 4 4820.00 19280.00

C.P. brass screws

15 MR-13 Providing and fixing of Bottale Trap Each 4 4465.00 17860.00

16 MR-14 Providing and fixing of Towel Rod Each 4 3635.00 14540.00

Providing and fixing C.P. bass angle valve for basin mixer and geyser

17 18.53 points of approved quality conforming to I.S:8931 a) 15 mm nominal 0.00

Providing and fixing unplasticised P.V.C connection pipe with PTMT

Nuts coller and bush of approved quality and colour.

20 18.74.2 15mm nominal bore with 45cm length Each 8 121.90 975.20 0.00

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

DESCRIPTION OF ITEMS UNIT Qty Rate (Rs.) Amount (Rs)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all (CPVC) plain &

brass threaded fittings including fixing the pipe with clamps at 1.00 m

spacing. This including jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of

engineer in charge. .

Internal Work - Exposed on Wall

18.7.4 32 mm nominal outer dia pipes. Metre 45 518.75 23343.75

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all CPVC plain &

brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.

2 18.8 This including jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the the same

including testing of joints complete as per direction of engineer in

Concealed work including cutting chases and making good the walls

18.8.2 20 mm nominal outer dia pipes. Metre 80.00 537.60 43008.00

18.8.3 25 mm nominal dia Pipes Metre 40 627.25 25090.00

18.8.4 32 mm nominal dia Pipes Metre 30.00 736.30 22089.00

Providing and fixing brass stop cock of approved quality complete.

18.16.1 15 mm nominal bore Each 0.00 353.25 0.00

18.16.2 20 mm nominal bore Each 4.00 379.20 1516.80

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end):

18.17.2 32 mm nominal bore Each 4.00 689.95 2759.80

Total 117807.35

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

Sl. NO. DESCRIPTION OF ITEMS UNIT Qty Rate Amount (Rs)

Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS :

13592 suitable for rubber ring joints, including all neccessary specials

and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints /

bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/

ceiling/ floor level supported by clamp & hangers etc. in concealed /

inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all

kind of soils, suspended from floor under false ceiling or embedding the

pipes laid under floors / building in 75 mm. alround 1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes

have been duly laid and tested. The rubber ring shall confirm to

The Pipes will be supported with threaded G I rods & U clamps with

nuts, washers etc on 50x50x5 mm slotted angle. The cost will include

2 all support arrangements. The work includes commissioning of all pipes

lines as per drawings and specifications and as directed by engg-in-

charge at site.

3 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 60 536.00 32160

4 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 60 416 24960

Providing, fixing, jointing and testing in position ISI marked (IS:4985) 0

UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from

fixtures to floor trap including reduces, enlarger, socket, couplers,

bends, tees etc including fixing at wall/ ceiling level supported by clamp

& hangers etc. cutting holes in wall/ floors/ slabs and making good the

same with cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with 0

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser 2144

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. 2904

grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with rubber 4004

10 MR-5 seal and flat round cover with screws and other required fitting EACH 4.00 1,001.00

complete as required.

Total 68,107.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO 2025/MR DESCRIPTION UNIT QUANTITY RATE

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with

1.5 sq.mm. FRLS PVC insulated copper conductor single core cable

etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated

A.2 copper conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

1.55 conductor single core cable etc as required. 0

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated 37300

copper conductor single core cable in surface/ recessed medium class

PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

1.24 Supplying and fixing following modular switch/ socket on the existing 0

A.4 modular plate & switch box including connections but excluding modular

plate etc. as required.

1.24.1 5/6 amps switch Each 40 121 4840

1.24.4 3 pin 5/6 amp socket outlet Each 40.00 136.00 5,440.00

1.24.5 6 pin 15/16 amp socket outlet Each 40.00 219.00 8,760.00

Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/module, GI box along with

A.6 1.27 Modular base & cover plate on existing modular metal boxes etc. as 0.00

Digitally signed by AMIT

S NO 2025/MR DESCRIPTION UNIT QUANTITY RATE

B SUBMAIN AND CONTROL WIRING 0.00

Wiring for circuit/ submain wiring alongwith earth wire with the

B.1 1.14 following sizes of FR PVC insulated copper conductor, single core 0.00

cable in surface/ recessed medium class PVC conduit as required

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 350 311 108850

Supplying and fixing of following sizes medium class PVC conduit aong

E.12 1.21 with accessories in surface/ recess including cutting the wall and 0.00

making good the same incase of recessed conduit as required

Total of Electrical items 3,97,990.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO DSR/MR Description UOM Qty Rate DSR Amount NDSR Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper

conductors for Connectivity of Hub room to End Point.High Speed METR

Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH E

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

3.00 MR-2 termination at Rack Side end Redantant . Keystone Unshielded Outlet, Nos. 10 359 3590

180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr

(7 feet) for information outlet (I/O) to end user Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow,

LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr

(7 feet) for information outlet (I/O) to Rack End Redantant device

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow,

LSZH, C6, 2M (Yellow)

Supply instllation testing and commissioning of Network Switch 24Port

PoE+, 10/100/1000Base-T, 4 x 1 1/10GbE, SFP/SFP+ Better than or

Equivalent to Juniper Networks EX2300-24P PoE+ Subtype Gigabit

Ethernet Ports 24 x 10/100/1000 (PoE+) + 4 x Gigabit SFP / 10 Gigabit

SFP+ Power Over Ethernet (PoE) PoE+ PoE Budget 370 Watt

Performance Switching capacity: 128 Gbps Throughput: 95 Mpps Jumbo

Frame Support 9216 bytes Authentication Method Extensible

Authentication Protocol (EAP), RADIUS, Secure Shell v.2 (SSH2),

TACACS+ Flash Memory 2 GB MAC Address Table Size 16000 entries

Authentication Method RADIUS, TACACS+, Secure Shell v.2 (SSH2),

Extensible Authentication Protocol (EAP) Power Over Ethernet (PoE)

PoE+ Encryption Algorithm MD5, TLS, PEAP, TTLS Routing Protocol

RIP-1, RIP-2, OSPFv3, static IPv4 routing, static IPv6 routing, RIPng,

CIDR Jumbo Frame Support 9216 bytes PoE Budget 370 W

ManufacturerJuniper Networks, Inc. as directed by the Engineer-in-

Supply instllation testing and commissioning of 24 port Patch Panel

(Make- CISCO/D Link)

Digitally signed by AMIT

S.No. Description Unit Qty. Rate Amount

LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120lm/Watt) Supplying of LED Recessed/

surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as

per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270

Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of

2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare

Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of

minimum 50000 Burning

Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K /

6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade

mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing

Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core

cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and

<120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature

shall not rise above 90°C) Powder coated die cast

/Extruded aluminium Body including trim with Aluminium Reflector 12 -15 watt

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying of Panel light 2x2 ft., of following

body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency

>85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95,

IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained

till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation

Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall

be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS,

PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all

testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that

LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body

(Thickness >1.20 mm) 36 watt

Total 76640.00

Digitally signed by AMIT