Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹25.0 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹27.7 L+₹2.8 L (11.0%)Rejected-AOC | ₹27.7 L+₹2.8 L (11.0%) | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 3 | L3₹28.0 L+₹3.0 L (12.2%)Rejected-AOC | ₹28.0 L+₹3.0 L (12.2%) | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 4 | L4₹28.4 L+₹3.4 L (13.7%)Rejected-AOC | ₹28.4 L+₹3.4 L (13.7%) | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| 5 | L5₹29.4 L+₹4.5 L (17.9%)Rejected-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | ₹29.4 L+₹4.5 L (17.9%) | L5 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | PAREEK AND COMPANY L5 | PACHAR BROTHERS L4 | AK CONSTRUCTION L2 | M/s BHUPINDRA ENGINEERING WORKS L1 | MAHIPAL CONSTRUCTION COMPANY L6 | BISHNOI BUILDERS L3 |
|---|---|---|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) If a bidder observes any item in the BOQ that appears to be "Freakishly Low" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date. (x) Any act by the contractor that is found to be against the interest of the Department,or commits misconduct or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark ("NO") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders. | |||||||||
| 1.00 | Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed by Engineer-in-charge. | 50 | Each | 150 ₹7,500 | 100 ₹5,000 Lowest | 150 ₹7,500 | 200 ₹10,000 | 150 ₹7,500 | 200 ₹10,000 |
| 2.00 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed by Engineer-in-charge. | 40 | Each | 150 ₹6,000 | 100 ₹4,000 Lowest | 200 ₹8,000 | 200 ₹8,000 | 150 ₹6,000 | 200 ₹8,000 |
| 3.00 | Taking down shutter of any description exc 1 sqm but not exc 2 Sqm complete all as specified and directed by Engineer-in-charge. | 100 | Per Leaf | 100 ₹10,000 | 100 ₹10,000 | 50 ₹5,000 Lowest | 100 ₹10,000 | 200 ₹20,000 | 100 ₹10,000 |
| 4.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 210 | Running Metre | 1,000 ₹2,10,000 | 700 ₹1,47,000 | 650 ₹1,36,500 Lowest | 900 ₹1,89,000 | 800 ₹1,68,000 | 777 ₹1,63,170 |
| 5.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).including dismantling existing wooden/Iron /stone chowkhats complete and making good existing disturbed surface with CM 1:3 complete all as specified and directed by Engineer-in-charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 100 | Running Metre | 1,000 ₹1,00,000 | 800 ₹80,000 Lowest | 1,100 ₹1,10,000 | 1,100 ₹1,10,000 | 1,100 ₹1,10,000 | 850 ₹85,000 |
| 6.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).including dismantling existing wooden/Iron /stone chowkhats complete and making good existing disturbed surface with CM 1:3 complete all as specified and directed by Engineer-in-charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 100 | Running Metre | 1,200 ₹1,20,000 | 900 ₹90,000 Lowest | 1,200 ₹1,20,000 | 1,200 ₹1,20,000 | 1,150 ₹1,15,000 | 900 ₹90,000 Lowest |
| 7.00 | S& F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 140 | Square metre | 4,200 ₹5,88,000 | 4,000 ₹5,60,000 Lowest | 4,800 ₹6,72,000 | 4,200 ₹5,88,000 | 5,700 ₹7,98,000 | 4,200 ₹5,88,000 |
| 8.00 | S& F for 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 70 | Square metre | 5,500 ₹3,85,000 | 5,500 ₹3,85,000 | 5,200 ₹3,64,000 | 4,400 ₹3,08,000 Lowest | 6,000 ₹4,20,000 | 4,700 ₹3,29,000 |
| 9.00 | S&F new 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat incl Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixed to wooden frame or welded to steel frame making suitable cut out in wall and making good in CM 1:4 (01 No in each shutter), stra, complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 50 | Square metre | 2,200 ₹1,10,000 | 2,000 ₹1,00,000 | 2,200 ₹1,10,000 | 2,000 ₹1,00,000 | 2,500 ₹1,25,000 | 1,900 ₹95,000 Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
15 Jun 2026, 6:00 pmClosed
GE (A) SURATGARH
GE (A) SURATGARH MIL STATION
REPAIR/REPLACEMENT OF JOINERY,DOORS,WINDOWS,CUPBOARDS AND OTHER CONNECTED B/R ITEMS IN VARIOUS BUILDINGS IN THE AOR OF AGE B/R-II UNDER UNDER GE(A) SURATGARH .
2026_MES_767610_1
GE(A)/SOG-TOKEN-09/2026-27
Open Tender
Civil Works
Item Rate
120 days
IN THE AOR OF GE (A) SURATGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(A) SURATGARH
₹60,000
Yes
28 Aug 2026
25 May 2026
17 Jun 2026
25 May 2026
15 Jun 2026
8 Jun 2026
25 May 2026 - 8 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed by Engineer-in-charge. | 50 | Each | - | - |
| 2 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed by Engineer-in-charge. | 40 | Each | - | - |
| 3 | Taking down shutter of any description exc 1 sqm but not exc 2 Sqm complete all as specified and directed by Engineer-in-charge. | 100 | Per Leaf | - | - |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 210 | Running Metre | - | - |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).including dismantling existing wooden/Iron /stone chowkhats complete and making good existing disturbed surface with CM 1:3 complete all as specified and directed by Engineer-in-charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 100 | Running Metre | - | - |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).including dismantling existing wooden/Iron /stone chowkhats complete and making good existing disturbed surface with CM 1:3 complete all as specified and directed by Engineer-in-charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 100 | Running Metre | - | - |
| 7 | S& F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 140 | Square metre | - | - |
| 8 | S& F for 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 70 | Square metre | - | - |
| 9 | S&F new 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat incl Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate fixed to wooden frame or welded to steel frame making suitable cut out in wall and making good in CM 1:4 (01 No in each shutter), stra, complete all as specified and directed by Engineer-in-charge including supply and fixing of following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia
(e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 50 | Square metre | - | - |
| 10 | S&F 30mm thick factory made solid core PVC door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in mild steel frame welded/ sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete, all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 3 Nos per leaf
(b) Aluminium anodised tower bolt of extruded section 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm
(c) Extruded aluminium Handles 125 mm-2 Nos per leaf.
Note : Rate for all above work is included in this item, Nothing extra shall be paid on this account. | 70 | Square metre | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_859656.xls
BOQ • 0.28 MB
T09.pdf
Tender Documents • 1.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .