Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8 LAccepted-AOC 20 VPO KALAYAT 136027 | KALAYAT | KAITHAL | HARYANA | 136027 | 1 | Accepted-AOC Found L-1 | |
| 2 | 2₹9.0 L+₹96,124.70 (12.0%)Rejected-Finance 62 KRISHNA CHAMBERS PHASE III AMRITSAR | AMRITSAR | AMRITSAR | PUNJAB | 2 | Rejected-Finance Rejected as found L-2 | |
| 3 | 3₹9.8 L+₹1.8 L (22.6%)Rejected-Finance | 3 | Rejected-Finance Rejected as found L-3 |
Tender Value
Refer Docs
Closing Date
7 May 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
M.D
The Kaithal Co.op Sugar Mills Ltd. Jind
Tender for construction of Room with Kitchen, Bathroom
2022_HBC_219147_1
Tender for construction of Room with Kitchen, Bath
Open Tender
Machineries/ Mechanical Engg Items
Works
90 days
Kaithal
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Exempted
25 Nov 2022
30 Apr 2022
8 May 2022
30 Apr 2022
7 May 2022
30 Apr 2022
90 days
Amount
CONSTRUCTION OF ROOM
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work below plinth level and up to Floor IV level : 1:4:8 ( 1 Cement : 4 Coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size )
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Suspended floors, roofs, landings, balconies
Lintels, beams, plinth beams, girders, and cantilevers
Providing and laying damp-proof course with cement concrete 1:1:2: 4 ( 1 cement : 1.5 coarse sand ( zone-iii): 3 graded stone aggregate 20 mm nominal size ) 40 mm thick
Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) (Derived Rate) (7.40-7.39)
Brick work with common burnt clay non-modular bricks of class designation 12.5 in super structure above plinth level up to floor four level in all shapes and sizes in : Cement mortar 1:6.
Half brick masonry with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level. Cement mortar 1 :4 ( 1 cement :4 coarse sand)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level , excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 ( 1 Cement coarse sand (zone-111) : 3 graded stone aggregate 20 mm nominal size).
Poviding and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 1 : 1 ½: 3 ( 1 cement : 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size).
15 mm thick cement plaster on the rough side of single or half brick wall of mix. Cement mortar 1:6( 1 cement : 6 fine sand)
12mm thick cement plaster of mix 1:6 on the brick wall 1:6 ( 1cement : 6 fine sand)
Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8 :16 and 100 mm sand or stone fillingRe-compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete
Painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kwrosene oil complete with residual type petroleum bitumen of grade VG- IO
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tiles bricks, grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by Weight of cement and finished neat : with common burnt clay non-modular brick tile of class sqm designation 12.50
Providing & fixing on wall face unplasticised Rigid PVC Rain Water pipe conforming to IS : 13592b Type A, including jointing with seal ring conforming to IS : 5382, 10 mm gap for thermal expansion, (i) Single sockted pipes. 110mm diameter
Providing & fixing on wall face unplasticised Rigid PVC moulded fittings/ accessories for Unplasticised Rigid Rain Water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, 10 mm gap for thermal expansion. pipes. Bend 87.5 degree 110 mm bend
Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand ) as per standard design : in 75x75 mm deep chase.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making finishing the outlet complete
Dismantling stone slab roofing over wooden karries or R.C.C. cum battens (dismantling karries and battens to be paid for separately), including stacking of serviceable material and disposal of unserviceable material within 50 metres lead Cement mortar.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.Cement mortar.
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respectNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more.
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned and chemically treated Hollock wood
Providing & Fixing in place door / Window frame of Section 170x58mm metre made of GPSP Sheet ( IS277) constructed from sheet thickness 1.2mm with a single rebate of 58mm duly filled with Puf and finished with Powder Coating In Regular RAL shades as desired by Engineer- In-Charge . Frame should be Coated with pure polyester/Epoxy Polyester powder coating having thickness of 60-80 micron and provided with 3mm thick hinge enforcement plates.
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISi marked Stainless Steel butt hinges with sqm necessary screws
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
CONSTRUCTION OF TOILET
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work below plinth level and up to Floor IV level : 1:4:8 ( 1 Cement : 4 Coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size )
Brick work with common burnt clay non-modular bricks of class designation 12.5 in foundation and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) (Derived Rate) (7.40-7.39)
Brick work with common burnt clay non-modular bricks of class designation 12.5 in super structure above plinth level up to floor four level in all shapes and sizes in: Cement mortar 1:6.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level , excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 ( 1 Cement coarse sand (zone-111) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Suspended floors, roofs, landings, balconies
Lintels, beams, plinth beams, girders, bressumers sqm and cantilevers
15 mm thick cement plaster on the rough side of single or half brick wall of mix. Cement mortar 1:6( 1 cement : 6 fine sand)
12mm thick cement plaster of mix 1:6 on the brick wall 1:6 ( 1cement : 6 fine sand)
Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8 :16 and 100 mm sand or stone fillingRe-compacting excavated soil in plinth under floors, including watering, amming, consolidating and dressing complete
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement:2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand ) as per standard design : in 75x75 mm deep chase.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making finishing the outlet complete
Providing & fixing on wall face unplasticised Rigid PVC Rain Water pipe conforming to IS : 13592b Type A, including jointing with seal ring conforming to IS : 5382, 10 mm gap for thermal expansion, (i) Single sockted pipes 110mm diameter
Providing & fixing on wall face unplasticised Rigid PVC moulded fittings/ accessories for Unplasticised Rigid Rain Water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, 10 mm gap for thermal expansion. pipes. Bend 87.5 degree 110 mm bend
Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade ( Two or more coats on)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing angle iron frames for door, windows and ventilators of mild steel Angle sections of sizes35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-charge
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tiles bricks, grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by Weight of cement and finished neat : with common burnt clay non-modular brick tile of class sqm designation 12.50
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) non – decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutter 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : sqm 235 368 603 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
CONSTRUCTION OF TOILET
80 mm PVC pipe. complete all items 10Kg
100 mm PVC pipe. complete all items 10 Kg
175 mm PVC pipe. complete all items 10 Kg
Cistern Cera oasis Silk/Dolphil complete all items
Wash Basen complete all items
English WC complete all items
Long nose
Bib Cock
1.5”,3/4”,1” G I pipe with all Accessories Elbow,tee socket,nipple etc.make Jindal B class
Water Tank Sintex 700 Ltrs complete all items
Main Hole complete all items
Flow trap 3”,4”
Sink Single
National Construction Company
THE HARYANA CO-OP LABOUR AND CONSTRUCTION SOCIETY LTD
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .