construction of building

Amount

CIVIL WORKS

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil) SD-22

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection using 1.0 Sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade with painting of suitable colour. SD-54A

Supply and clamping of 3 x 1.5 Sq.mm PVC LTUG armoured copper cable on post or on wall with MS clamps.(for Tube Fitting & street lights power supply)

Supply and clamping of 3 x 2.5 Sq.mm PVC LTUG armoured copper cable on post or on wall with MS clamps.(for power supply from Rolling shutter to rolling shutter)-IN SIDE & OUTSIDE

Supply and clarnping of 3 x 4 sq.mm PVC LTUG armoured copper LTUG cable on post or on wall with MS Clamps.(SD-215A)

Supply and fixing of brass cable gland for 3 x 1.5/2.5/ 4 Sq.mm PVC LTUG armoured copper. cable with earth connection.SD-183A

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make).SD-167

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.SD-133

Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box. SD-136

Supply and fixing of 6/8way- metal Box with six numbers of 6 to 32A SPMCB in sheet steel enclosure with flush with well siring earth connection for controlling of Light/plug points.(Light/ power point-power supply control used at inside of Godown Building near Rolling Shutter) SD-243B( MCB of L&T /Legrand make)

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make]SD-140

Supply and run of 3core of 2.5 sqmm FLEXIBLE COPPER CABLE of 1100V Grade with suitable connection from 20Amps DP Box to Godown inside Switch box etc complete (ISI make) SD-244

Supply and fixing of single box 4’40W flu fitting complete with copper choke and condenser with TW round blocks on wall of ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting with flu. Tubes(MAKE :CROMPTON) SD-88A

Supply and fixing of single box type 4'40 W flu fitting complete with Electronic choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.( crompton make)( for fixing Light fitting at 7M height-truss Godown)SD-88B

upply and fixing of 45/48Watts LED ( 6000K) street light fitting (Specification :- high power LED a light source with Electronic driver, Fitting of Versatile pressure de-cast Aluminium (IP66 )alloy LM-24 for housing (heat sink) for better heat transmission., fitting with Epoxy powder coated white after phosphochromate treatment.and optics is Asymmetric type)complete with 32mm dia GI pipe (Class ‘B’) with 1 No 32mm GI bend complete on the post or wall with necessary clamps with PVC unsheathed copper leads MS clamps and with control switches and as directed ( ISI standards) ( crompton/ similar make )SD-95A

Supply of Power supply-Extension box,consist of 3 Nos. 5Amps (3 Pin and 2 Pin) socket with control switches,one Indicator in suitable TW Box covered with Hylem sheet, with 15Meter of 3core- 1.5Sq.mm copper wire of flat flexible cable wire and 5A-3pin top.The extension box with all inner-connections, flat cable wire connections with 3pin top also.The cost includes all materials cost,incidental charges,transportation charges and the materials of ISI make and as directed at site.(power supply provision for Weigh-Machine & bag-closing machine inside godown usage).SD-139A

Earthing as per PWD standard with an earth electrode of 2 mt class ‘B’ GI pipe of dia not less than 32 mm, complete with necessary masonry work.(SD-234

Supply and run of 1 of No.8 SWG copper wire for earth connection..SD-74A

Supply and laying GI pipe of size -50mm dia for road crossing protect of UG cable including all incisdental charges.SD-246

Provision for Earth work using JCB machine for cable laying work at hard /rocky soil .The cost includes hire charge of machine,fuel charges and other incidental charges,etc completeSD-183D

Supply and laying of 2x16sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good. (SD-199)

Supply and clarnping of 2 x 16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-217)

Supply and fixing of brass cable gland for 2 x 16 sqmm PVC armoured LTUG cable with earth connection SD-183

Supply and laying of 4x10sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good. (SD-220)

Supply and fixing of brass cable gland for 4 x 10 sqmm PVC armoured LTUG cable with earth connection (SD-202)

Supply ,Fabrication and fixing of Clamp set with 1Meter -MS pipe Down rod arrangement(2no of pipe ) suitable for fixing Tube light set in Roof Truss bottom including bolt,nuts and washers,etc., complete and as directed .The cost include cost of MS flat clamp-size 25x3mm with suitable lenght,bolt,nuts,washer,fabrication charge ,welding charge, drilling charge and other incidental chages,transportation charge,etc complete.

Supply,fabrication and fixing of MS connector box with suitable clamp set of suitable size for 1.5Sqmm UG cable connection with Tube light terminal wire with 2way open type Backlite connector.The cost includes the cost of MS Box,suitable clamp set,backlite connector,bolts,nuts and other incidental charges and as directed

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp.SD-107

Supply and Fixing of 3nos 5Amps(3pin and 2 pin)combined flush with wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with earth connection(For computer plug Socket) SD-139

Supply and fixing of fancy glass shade and 11W CFL for BH point SD-80

Supply and fixing of Vetical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 63A 4 pole MCB isolater as incoming and 4 Nos. 32 A TP MCB as outgoing in surface type fitted with suitable angle frame in wall and making good of the concealed portion with earth connection and provision for taking up UG cable. The MCBDB and MCB's should be with the ISI mark (like standard make) SD-179A

Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(SD-68)

Supply and run of 4x6 Sq.mm PVC copper unsheathed wire in 32mm dia GI pipe (class-B) bend at both ends with necessary angle iron uprights and end supports for service mains (SD-73)

Supply and fixing of 3phase 63 A aerial fuse units (500A) on suitable MS sheet covered with hylem sheet on suitable angle iron work the tapping pole with necessary clamps.(SD-132A) --A

Supply and fixing of TNEB 63A Three Phase service connection Panel board fabirication and powder coating with complete internal wiring as per drawing and specification inclding matirials (panel box size 30"x10"x30") 1. 63A 4Pole on load change over switch -1, 2.63a TPN SWITCH+ FUSE HRC, 3. 32A Porceileain fuse 9Nos, and indication lamb RYB 3Nos, and internal wiring flex wiring 10Sq mm including materials.

Providing Liaison work with TNEB Department for getting new service connection by engaging TNEB registered license holder for the load calculation and registration of E.B. application with VAO certificates and land registration documents with sketch , wiring circuits ,etc, complete. The rate including cost of conveyance charges for conveying of poles to the site by hire vehicle and arranging inspection of site by AEE / AE / TNEB for Preparation of necessary estimate and getting advise letter from TNEB for arranging to paid Deposit and service connection charges . Engaging labour for Earth work in pole erection, stay erection , laying of conductors etc., complete including obtaining service connection from TNEB. for Providing E.I to the newly constructed Godown building

SRIRAM CONSTRUCTIONS