Renovation work of U.T. Bhawan, Chanakyapuri, New Delhi.

Civil Works

Civil Works Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm. in depth, consolidating each deposited layer by ramming and watering lead with the site complete.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforcement for R.C.C.work including straightening ,cutting bending placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer -in - charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.“ (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. All works up to Plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing machine cut, mirror / eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1cement : 3 oarse sand) laid and jointed with white cement slurry @ 3.3kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Decorative type door

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing expandable fasteners of specified size with plastic sleeves and galvanised M.S. screws including drilling holes innecessary masonry work /CC/ R.C.C. and making good etc. complete 50 mm long

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. 150x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing Aluminium body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete shown as per architectural drawing and direction of the Engieer-in-Charge

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mmshall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick pre laminated PVC door shutters

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.0 mm thick

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately

Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement

Sand stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,in average 3mm thickness.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make Kajaria or equivalent as per make list)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Making khurras 45x45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 1:6 (1 cement : 6 fine sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

White washing with lime to give an even shade: New work (three or more coats)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.

French spirit polishing : Two or more coats on new works including a coat of wood filler.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :Door chowkhats

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :Window chowkhats

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 5.5 mm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-chargeIn cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : (a) Thickness above 10 mm up to 25 mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.New work (Two or more coats)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (2.75Kg per Rmt)

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm. Top & Bottom side on both slabs

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sum. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.

Providing and fastening Rebar with Hilti HY 150 as per structural drawing, manufactures instructions and as instructed by Engineer-in-charge for anchoring of reinforcement bars. Rate to include cost of drilling by mechanical means in concrete, cleaning the drilled holes, insertion of Hilti Re500, placing rebar and allow adhesive to cure.Upto including 12mm dia

Providing and fastening Rebar with Hilti HY 150 as per structural drawing, manufactures instructions and as instructed by Engineer-in-charge for anchoring of reinforcement bars. Rate to include cost of drilling by mechanical means in concrete, cleaning the drilled holes, insertion of Hilti Re500, placing rebar and allow adhesive to cure. 16mm dia

Providing and fastening Rebar with Hilti HY 150 as per structural drawing, manufactures instructions and as instructed by Engineer-in-charge for anchoring of reinforcement bars. Rate to include cost of drilling by mechanical means in concrete, cleaning the drilled holes, insertion of Hilti Re500, placing rebar and allow adhesive to cure. 20mm dia

Providing and Laying 18 -20 mm thick pre-polished (mirrior/tin oxide) approved colour Italian marble stone slabs of approved shade and patternas per drawing in floors, skirting,wash basin counter,bath tub top, dado,jambs,surround,cladding, borders/strips etc. laid over a bed of 20 mm (average) thick cement mortar 1:4 (1cement: 4coarse sand) including laying slabs in cement slury pigmented to match the shade of the slabs, grouting joints using stone, marble or combinations of both complete as per specification Pl. Note:1. Basic rate = Landed cost = rate of stone/marble(without taxes) + loading & unloading charges + transprotation charges. 2. Rates are inclusive of chasing/ cutting in masonory/concrete, if any, to fix the marble at any location. 3. Nothing extra shall be payable for fixing the skirting,splash back,ledge etc. flush with the plaster or projecting out from plastered surface.4. Rates shall include re-polishing ( mirrior/ tin oxide) on pre-polished stone due to any undulation or improper slope. P/making full round (bull) nosing in Granite stone including mirror (tin oxide) polishing complete as directed. (make Mangla Stone or equivalent as per make list)

Frameless Toughned glass Door Shutter including fixed glass in Main Entry Door Providing and fixing 10 mm thick frameless Toughned glass door shutter with floor spring type fixing arrangement with weight carrying capacity up to 120 kg, minium 1.0 lakh turn and making necessary holes in glass with CNC machine for fixing required door fittings including fixed glass 10mm thickness both the sides with all accessories complete with required materials of approved make as per approved drawing and direction of Engineer-in-charge.(Basic Rate of 10mm thk glass Rs.180/Sqft) ( Make Glaasik or equivalent as per make list)

Hardware for Frameless Toughned glass Door Shutter Top Patch Fitting (Basic Rate of Patch Fittings Rs.2500/- Per Piece) (make Hafele or equivalent as per make list)

Hardware for Frameless Toughned glass Door Shutter1800mm high pull handle ,,Polished SS/BRASS/ANTIQUE FINISH,Pull Handle 1800 back to back adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =1000mmX40mmX20mm, (make Hafele or equivalent as per make list)

Hardware for Frameless Toughned glass Door Shutter DEAD LOCK SET, , Normal keys Half Euro profile cylinder with key operation standard length 45mm in SSS/gold finish with 3 keys.(make Hafele or equivalent as per make list)

Hardware for Frameless Toughned glass Door ShutterFloor Spring Door Wt. Capacity-270 kgs.(make Hafele or equivalent as per make list)

Hardware for Frameless Toughned glass Door ShutterTop Pivot (make Hafele or equivalent as per make list)

Providing and fixing in position 6mm thick mirror pasted over 12mm thick marine ply with the help of 3M tape.The frame of SS angle of size 20x20x2mm shall be fixed on all four corners of mirrior.The mirror should be fixed on wall surface with the help SS clamps. (Basic Rate of mirror Rs120/- Per Sqft) (make glaasik or equivalent as per make list)

Providing and fixing in position pelmet made out of 18mm thick MDF Board of approved make of 200mm size as specified in approved drawing. Base structure shall be made out of MS frame works consisting of MS angle 25x25x3mm and MS flat 25x3mm supported from the RCC slab ceiling with G.I. steel hanger 25x10x0.5mm fixed with dash hold fasteners, MDF board painted with plastic emulsion paint shall be fixed on it to receive blinds channel. The job shall include hanger and adequate arrangement with anchor fasteners from concrete/adjacent wall, MS members shall be finished with minimum two coats of synthetic enamel paint with under layer coats of suitable primer all complete with required materials of approved make for all floor heights, as per approved design and drawings and direction of Engineer-in-Charge (In place where motorized blind being used appropriate trap door to be made in pelmet to put the motor above false ceiling.)

Providing and fixing of Rubber flooring of approaved thickness between (4-8mm) and color as approaved by the Architect/ Client. The flooring shall have abrasion resistance of 165mm3 as per ISO 4649, residua; indentation of 0.08mm, shall be fire resistant rated Bfl- S1. Hardness shall be as per ISO 7619 and shall have an anti slip performance of ≥ 0.30 DS. (Basic rate of rubber flooring 1000.00 per sqm)

Providing and fixing 3M film or approved equivalent make in plain/ colored in approved compurised pattern over glass as per approved design, all complete with required materials of approved make, for all floor heights as per approved design, pattern and drawings and direction of Engineer-In-Charge.(Actual film area shall be measured in sqm up to decimal place for payment) Plain frosted film-Code-7725.314 of 3M or approved equivalent

Providing and Laying 25mm thick plaster of paris on suspended ceiling in one or more horizontal levels,vertical/horizontal boxing with GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling, screw fixed to wall with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using GI cleat and steel expansion fasteners, galvanised expanded metel mesh 10x30x1.6mm reinforcement fixed to GI Frame work as per the India Gypsum specifications including cutting/ opening for fixtures, AC grills etc.and providing additional hard wood or metel frame around openings & making good the same including repair to A.C. grills,opening for lights/fixtures etc. Including Cove Type POP false ceiling (as per the drawing attached) including GI framing work at all heights as per the specification same as above item including cutting/ opening for fixtures, AC grills etc.and providing additional hard wood or metel frame around openings & making good the same including repiar to A.C. grills,opening for lights/fixtures etc.as directed.

Supply and installation of approaximately 900 mm high satin finish stainless steel railing of 316 Grade made of 38mm dia SS pipe handrail modular including 12mm thick toughned glass and component based system having unified stem keys Hafele make or equivalent as per make list as connector between pipe rail and 12x54mm flat members to be fixed at a minimum distance of 1500mm aprox. as per drawing, complete with all necessary bands and joints and erected with epoxy grouts on the wall/floor.The entire job required to be completed in all respect as per drawings and specification also as directed by Project Manager/ Architect

Providing and fixing in position wash basin counter including Moulding in required shape and size,18mm thick approved granite stone (Single piece ) of approved quality in counter tops, facia, up-turn and ledges etc. with machine cut-edges as per required profile including making required shape in counter tops fixed on 19mm thick marine ply of approved make with silicone sealant GP of Dowcorning or approved equivalent, mixed with pigment to match the shade of White engineered stone including necessary back sets, edge moulding etc. and adequately fixing marine ply backing on the MS frame with suitable countersunk SS screws, all complete with required materials of approved make, as per approved drawing and direction of Engineer in charge. The job shall include cutting hole for sanitary fitting and fixtures,antitermite treatment,wood preserative paint with primer on ply and synthetic enamel paint with primer on MS Frame work. (Base Rate of granite Rs.1200 Per sqm.)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding window sash (60 mm X 44 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding interlock for window (1 verticle length in each shutter)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding, glazing bead (35 mm X 18 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding door two track, 2/4 shutters Two track sliding frame (67 mm X 52 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding door sash (80 mm X 44 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding interlock for door (1 verticle length in each shutter) (45.5 mm X 28 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Sliding, glazing bead (35 mm X 18 mm)

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash willbe mitered cut and fusion welded at all corners including drilling of holes forfixing hardware and drainage of water etc., making arrangement for fixing ofhardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to beinserted in required profile, frame will be fixed to the wall with 8 mm x 100 mmlong fasteners, all complete as per direction of Engineer‐incharge. (Glazing,hardware hinges and fitting etc. to be paid separately.) Two track sliding frame (67 mm X 52 mm) (make window magic or equivalent as per make list)Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.

Full height Storage /Cupboard (Ht.2100mm ) : P/F of storage unit 600mm deep consisting of double leaf openable shuttered finished with 1mm thick approved laminate of Century or equivalent as per make list on front faces over 19mm thick board frame on top ,bottom & sides and 6mm thk ply on back side of cabinet using approved board or equivalant including drawer units,shelves finished colour as per Interior dwg. with necessary hardwares of Hafele or equivalent as per make list like concealed Hinges, magnetic catcher,locks,handles, knobs complete etc. at all aspects. All internal sides shall be painted with enamel paint approved colour shade. All exposed surface to be treated with anti termite and fire reterdant paint before painting work complete etc. (Refer Arch. dwg.) (Make- Moreinside-FHCS01 or equvalent as per make list)

Half Storage /Cupboard (Ht.1200mm ) : P/F of storage unit 335mm deep consisting of double leaf openable shuttered finished with 1mm thick approved laminate of century or equivalent as per make list on front faces over 19mm thick board frame on top ,bottom & sides and 6mm thk ply on back side of cabinet using Approved make or equivalant including drawer units,shelves finished colour as per Interior dwg. with necessary hardwares of hafele or equivalent as per make list like concealed Hinges, magnetic catcher,locks,handles, knobs complete etc. at all aspects. All internal sides shall be painted with enamel paint approved colour shade. All exposed surface to be treated with anti termite and fire reterdant paint before painting work complete etc. (Refer Arch. dwg.) (Make- Moreinside-HHCS01 or equvalent as per make list)

Providing and fixing of storage unit consisting of double leaf openable shuttered finished with 1mm thick approved laminate all faces over 19mm thick board of century or equivalent as per make list frame on top ,bottom & sides and 6mm thk ply on back side of cabinet using Century ply’s or equivalant including drawer units,shelves finished as per Interior dwg. with necessary hardwares of Hafele or equivalent as per make list like concealed Hinges, magnetic catcher,locks,handles, knobs complete etc. All internal sides shall be painted with enamel paint approved colour shade. All exposed surface to be treated with anti termite and fire reterdant paint before painting work complete etc. (Refer Interior dwg.)(Kitchen)

P/F of open shelve display unit 335 mm deep comprises laminated surfaces in all internal faces finished with 1mm thick approved laminate of century or equivalent as per make list over 19mm thick board of century or equivalent as per make list frame on top ,bottom,sides and shelves and 6mm thk ply on back side of cabinet using approved or equivalant make as per Interior dwg.colour and design to match with the existing display shelves with necessary hardwares of Hafele or equivalent as per make list ,glues,nails,screws complete etc. at all aspects. The bottom of display unit in elevation should have 100mm high skirting match with floor finish. All exposed surfaces to be treated with anti termite and fire reterdant paint before painting work complete etc.(Refer Interior dwg.) (Make- Moreinside-BS02 or equvalent as per make list)

Providing and fixing of 12mm thk float glass partition with provision of glass door in the master toilet to be fixed in the wall both sides,filling with approved non staining silicon sealant including labour element for glass, stacking, carrying to all heights and fixing in appropriate locations etc complete is to be included in the rate.The glass partition having door opening with SS handle shown in the drawing entire process as given above to be adhered to & as per the architectural drawing and direction of the Engieer-in-Charge. (make Hafele or equivalent as per make list)

Providing and Fixing of 50mm X 19mm wooden band made out of a base of 19mm thick waterproof ply finished with 4mm thick veneer of Century or equivalent as per make list with duco paint finish at the bottom of mirror panelling to be fixed on brick wall as per the interior dwg and specs, necessary hardwares complete etc.

Providing and fixing of vinyl backed wall covering to be fixed on wall necessary hardware required complete etc.(Basic Rate Rs.1400/Sqm) Make Kaara or as equivalent make

Providing & Fixing decorative type 4.0 mm thick veener sheet of Archid ply or equivalent as per make list of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality etc complete.

Providing & Fixing of Automatic type Sensored glazed sliding door as per vendor specs, etc complete ( Hafele make or as equivalent)

Signages ( Stapers make or as equivalent ) Rooms

Signages ( Stapers make or as equivalent ) Directional

Providing & Fixing of decorative type wooden jali with LED light display shown as per interior drawings etc. complete(corridor)

Providing & Fixing translucent 4 MM thick Polycarbonate sheets of matching profile for roofing and cladding including required overlaps over the existing M.S frame on terrace shaft closing or wherever required as per drawing to be provided with GI chicken mesh or wire net 1 SWG 75mesh, equivalent self tapping screws, sealing joints, all necessary accessories etc. complete.

Providing & Fixing GI chicken mesh or wire net 1 SWG 75mesh, equivalent self tapping screws, sealing joints, all necessary accessories etc. complete.

Supply & Installation 24 KWP Grid Tie Solar Power Plant Polycrystalline PV Module of rating 315 -335 wp Make:Vikram/Lubee/Waree Hot Dip Galvanized MS Module Mounting Structure for PV panels Grid Tie Solar Inverter Rating: 24 kW Make: Thea or equivalent as per make list Warranty: 5 Years Lighting Arrestor Make: Standard or equivalent as per make list 3 meter long, 50 mm outer dia,terminal size 40x6 mm, gi earthing with 2x25 kg earth enhancement compound & poly plastic earthpit cover with installation. GI Strip from earthpit to IIP and module structure DC Cable for Module to Module Interconnection and for connecting the Inverter along with Conduit and dressing for the Power Plant as per electrical Standard , Make: Lapp, KEI or Polycab DC Solar Cable, Double Insulated, Weather proof, UV Protected for Panel to Junction Box and Junction box to Inveter. AC Cable for connecting the Inverters to the Input Panel and Output Panel, Maximum Length 30 mtrs from Inverters to GIP (AC junction box).:Lapp, KEI or Polycab. Civil structure foundation for Module Structure Mounting. Either fixed RCC & PCC or pre cast concrete cubes as per site conditions. Installation and Commisisoning of the Power Plant (make emerson or equivalent as per make list)

ECO STP KIT (20KLD) Supply and Installaction of ECO STP Kit including design and developing drawings, Rumen Digester Filter Media, Bacteria Inoculation, Civil engineer visits, Venturi Exhaust Vent and Tertiary Treatment

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements.110mm dia 6kg / sq.cm

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements.110mm dia tee 6kg / sq.cm

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. 150mm dia 6kg / sq.cm

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. 150mm dia tee

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. 110mm dia vent cowl

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. 300mm dia 10kg / sq.cm

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. RCC Manhole cover 600mmx600mmx75mm

Providing and fixing PVC pipes ISI marked 6kg/cm2 with solvent cement / rubber ring joints Including any cutting & making good of floors / walls that may be necessary clamps and stays as per requirements. Pedestal for ventilation pipes : brick work with plastered with CM 1:4 thickness 20mm

Stone Aggregates (Single size) 40mm nominal size

Stone Aggregates (Single size) 20 mm nominal size

Stone Aggregates (Single size) 10 mm nominal size

Cow dung slurry/ anaerobic activated sludge for developing an appropriate innoculum culture for settler and FBR chambers

PGF and Slow Sand Filter construction Filter media:- Stone Aggregates (Single size) 40mm nominal size

PGF and Slow Sand Filter construction Filter media:- Stone Aggregates (Single size) 20mm nominal size

PGF and Slow Sand Filter construction Filter media:- Stone Aggregates (Single size) Coarse sand 0.3mm to 0.5mm

110mm dia PVC pipe

110mm dia Valve

110mm dia End cap

110mm dia SSF outlet

50mm dia CPVC Pipe

50mm dia CPVC Pipe tee, union & elbow

50mm dia Ball Valve

Under Water Pump for PGF Inlet- KSB / Kirloskar - AMA Porter 1HP Under Water Pump with Control Panel (For Sewage Water)

Under Water Pump for SSF Inlet- KSB / Kirloskar - Open Well 3HP Under Water Pump with Control Panel (For Clear Water)

watre level indicator for PGF and SSF tanks

Automatic control panel for PGF and SSF tanks

Sensors for PGF and SSF tanks

Providing and fixing External cladding, decorative compact HPL laminate in 6mm thickness as per EN 438-6 type EDS/ EGS, specially treated acrylic resis under high pressure and temperature and hardened into sheet, thus provided all weather protection and UV resistance shade in sued finish size 8' X 4' in cluding installation charges etc .complete at all heights and level etc (Make: Fundermax or eq. as per make list)

All-inclusive comprehensive maintenance of detailed Designing, Engineering, Procurement, construction and renovation of Earth work, concrete works, R.C.C. works, Form works, wood and Pvc works, flooring, ceiling, marble and granite works, finishing works, dismantling and demolishing, road works, door and windows, Landscape works, electrical, solar system, HVAC, plumbing, kitchen, STP and other related interor works with their Operation and maintenance for the period of 03 years after1 year of Defect Liability Period for renovation works at UT Bhawan, Chanakyapuri as per Master Plan, Specifications, Codes and Practices contained in the Tender Document. The Design of facilities shall confirm to standard specified by NBC, CPWD, IS etc. wherever required and in conformity with ATM/CNS/IMD/BCAS regulations regarding permissible heights, locations requirements etc.Operation & Maintenance of all Civil and MEP works covered above, during first year after Defect Liability Period excluding the all equipment which is covered under manufaturesgurantees/warrenties.

All-inclusive comprehensive maintenance of detailed designing, Engineering, Procurement, construction and renovation of Earth work, concrete works, R.C.C. works, Form works, wood and Pvc works, flooring, ceiling, marble and granite works, finishing works, dismantling and demolishing, road works, door and windows, Landscape works, electrical, solar system, HVAC, plumbing, kitchen, STP and other related interor works with their Operation and maintenance for the period of 03 years after 1 year of Defect Liability Period for renovation works at UT Bhawan, Chanakyapuri as per Master Plan, Specifications, Codes and Practices contained in the Tender Document. The Design of facilities shall confirm to standard specified by NBC, CPWD, IS etc. wherever required and in conformity with ATM/CNS/IMD/BCAS regulations regarding permissible heights, locations requirements etc.Operation & Maintenance of all Civil and MEP works covered above, during second year after Defect Liability Period excluding the all equipment which is covered under manufaturesgurantees/warrenties.

All-inclusive comprehensive maintenance of detailed designing, Engineering, Procurement, construction and renovation of Earth work, concrete works, R.C.C. works, Form works, wood and Pvc works, flooring, ceiling, marble and granite works, finishing works, dismantling and demolishing, road works, door and windows, Landscape works, electrical, solar system, HVAC, plumbing, kitchen, STP and other related interor works with their Operation and maintenance for the period of 03 years after 1 year of Defect Liability Period for renovation works at UT Bhawan, Chanakyapuri as per Master Plan, Specifications, Codes and Practices contained in the Tender Document. The Design of facilities shall confirm to standard specified by NBC, CPWD, IS etc. wherever required and in conformity with ATM/CNS/IMD/BCAS regulations regarding permissible heights, locations requirements etc.Operation & Maintenance of all Civil and MEP works covered above, during thirdyear after Defect Liability Period excluding the all equipment which is covered under manufaturesgurantees/warrenties.

Execution of Third party testing of External Plaster sample from approved testing laboratory of ISO - 9001:2008 Certified Institute.The Ratio of Ingredient of OPC used in mixture, qyantity required for sample is 2Kg and test report to be published within 15 days of sample collection with the contractor's own cost. ( Shreeram laboratory, Delhi or as equivalent )

Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab,Provide weather-resistant and water proof coatings on stone flooring (Sealer of make: Ariston or equivalent) laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Base Rate of 18mm thick Italian Marble is Rs 4035 per Sqm)William Grey/ AlaskaGrey/Volakas/White Carrara Marble/ Valentino/ Australian White or as approved equivalent. (make Mangla stone or equivalent as per make list)

Inlay work in Italian Marble flooring on Ground floor

Inlay work in Marble flooring on First & Second floor

Sand blasting on Stone work on first floor.

Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab,Provide weather-resistant and water proof coatings on stone flooring (Sealer of make: Ariston or equivalent) laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Base Rate of Marble: Rs 8650 per Sqm. Book match Sattuario or as approved equivalent. ( Mangla stone or equivalent as per make list)

Supplying and fixing Mini Refridgeration of capacity 30 L Qube Personal Cooling Solution as per vendor specs and approved make Advanced Solid state electronic cooling technology, No Defrosting required Warranty: 1 year on product, Capacity :30L, Whisper Silent operation, Ease of maintenance and service,Runs on home inverter, Ideal for small room, bedroom, mini bar

Supplying and installation of 164 cm (65 Inches) 4K UHD LED Smart (VVIP/VIP Suites) Display: 65-inch Display | 4K |3840x2160 Screen Resolution|LED Screen Type|50Hz Refresh Rate| Ideal viewing distance of 8 - 12 ft Connectivity: 2 USB Ports|3 HDMI Ports|Bluetooth|Wi-Fi, LAN/Ethernet Sound output: 20W Speakers|DTS Virtual X: Immersive, surround-sound audio|Dolby Audio: Advanced audio formatting and signal processing to deliver enhanced sound Special features: Inbuilt Apps (Netflix, YouTube, Hotstar, Prime Video, etc.)|HDR Technology (Dolby Vision, HDR 10)|Voice remote| Screen Casting|Power Saving Mode|Gaming mode

Supplying and installation of 123 cm (49 inches) FULL HD LED Smart TV Resolution: Full HD (1920 x 1080p) | Refresh Rate: 60 hertz Display: HDR | Bright Pictures | Rich Colors | Natural Skin Tone & Crisp Details | Ultra Pix|Micro Dimming Pro Connectivity: 2 HDMI ports to connect set top box, Blu Ray players, gaming console | 1 USB port to connect hard drives and other USB devices Sound output: 40 Watts Output | Dolby Digital Plus Warranty: 1 year standard manufacturer warranty

Supplying and installation of 100 cm (40 Inches) Full HD LED Smart TV Resolution: Full HD (1920x1080) | Refresh Rate: 60 hertz Connectivity: 2 HDMI ports to connect set top box, Blu Ray players, gaming console | 1 USB port to connect hard drives and other USB devices Sound : 20 Watts Output Smart TV Features : Personal Computer | Live Cast | Screen Mirroring | Content sync & share |Mobile Set-up (Available in the Page) Display : LED Panel | FHD | Micro Dimming Pro | PurColour | Slim and stylish design Warranty Information: 1 year comprehensive and 1 year additional on panel provided by Manufacturer

Providing and laying Concrete stamping of approved color and pattern with coat of sealent at Entrance area including cost of PCC upto plinth level. (Unistone make or as equivalent )

Providing of scafolding to clean existing façade tiles with chemical in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge

PROVIDING AND FIXING OF WPC WOODEN FLOORING AS PER architectural drawing of approved make. (make Kaara or equivalent as per make list)

Variflex sliding and folding partition The partitions shall comprise of flat panels, plus 1 expanding panel (telescopic element) for closure. The sound coefficient (Rw) shall be 45dB. The sound insulation tests of the movable walls are carried out under German DIN standard with results measured in Rw. This is a standard test in a laboratory with so called flanking sound transmission. This test is the most realistic because itis a measurement under site conditions including sound transmission through ceiling, doors, walls etc.The panels shall stack at the end of the track in center stacking formation. The thickness of each panel is 85mm including 16mm thick MDF on both sides.The partition runs on a specially designed and firmly held track of heavy-duty aluminum in which a specially designed trolley on ball bearing runs smoothly and noiselessly. The closure of the spaces above, below and between the panels is done by a specially designed mechanism, which closes these gaps to prevent passage of sound. Installation:The track received from the manufacturer is affixed to this structure with suitable suspension arrangement after leveling and straightening.Also the longevity and ease of operation depends on the precision and level of track achieved before the partition is installed. Therefore the installation process is as important as the quality of the partition. As we have been in the business for the last 20 years we are well aware of the problems and take care of them before they cause any trouble.These panels are thereafter suspended in the track and checked for smooth operation, parallel horizontal movement and sealing all around. Sound Baffle/Barrier: Variflex sliding and folding partition with 45dB (MDF finish) measuring 6515mm(W) X 3000mm(H) with pass door including: Installation . (make Hafele or equivalent as per make list) After installation a sound barrier is erected between the false ceiling and the RCC ceiling using one/two 12.5 mm thick gypsum boards on each side of the track filled with a mineral wool mattress and fitted to a G.I. sheet framework. All cracks, joints, openings are caulked with special compound and taped over to form a solid wall of the same STC as of the partition. The efficiency in sound insulation of a partition depends on its installation, which has to be done in order to achieve the same insulation coefficient above the false ceiling as that of the movable wall. Levels: The bottom of the track level is on the same height as the false ceiling. For more efficient sealing of sound a hard stone floor is ideal. Carpet floors also can be used after allowance for it has been made and indicated to the manufacturer. Finish: Finish can be done at site to match the interiors of the hall.

Providing and fixing wall paneling comprises 25x25mm thick wooden battern fixed over the RCC /brick plastered surface. The frame shall be fixed @ 600mm C/c on wall as a base. The top finished suface shall be finished with 4mm thk veneer of make century or equivalent as per make list, base of 12mm thick BWP ply necessary hardware etc complete as shown in the drawing and direction of project in charge.

Creating design and creation of Artwork concept on wall with Handpainted mural including initial visit to site. Preparation of various designs with different patterns/color. Providing the Samples layout for approval ,improvisation in short listed creative and making of final layout for final production by enlargement of drawing as per ratio of actual size complete as per direction of Architect Artwork execution Making hand painting mural of approved design on the walls. The cost is inclusive of approved pigments, designing concept, preparation of layout, expert artist Supervision,& PU coating complete as per direction of Architect asper approved make.

Providing and fixing of canvas print pictures including all necessary hardware and frame for installation.

Providing and fixing of FRP jali of approved make.50mm thick as per design.

Half column-Providing and fixing of FRP column of approved make as per design.

Cornice Work-Providing and fixing of FRP cornice of approved make.

Providing & applying of exterior texture Paint of approved shade and colour of ICI Dulux / Asian Paints or equivalent make in minimum three coat , including wall putty and preparation of surface, scrapping, sand papering, scaffolding etc complete

Forms+ SurfacesDESCRIPTION: CUSTOM (HSN: 84313100) NUMBER OF CABS: 04 CAB SHELL MATERIAL: *TBD* CAB OPENING CONFIGURATION, SINGLE ENDED(REAR AND SIDE WALLS)= 3 WALLS/CAB DIMENSIONS: ACTUAL DIMENSIONS PER F+S APPROVAL DRAWINGS CAB: UP TO 2470MM W X 1925MM D X 2600MM H Rear Wall Total 04 Panels Including Base Panel Bronze Tinted Mirror, Standard Finish: 01 Panel Bonded Bronze, Dark Patina, Charleston Pattern: 02 Panels I Bronze Satin N4 Finish: Base Panel Left Side Wall 1 Total 04 Panels Including Base Panel Bronze Tinted Mirror, Standard Finish: 01 Panel Bonded Bronze, Dark Patina, Charleston Pattern: 02 Panels I Bronze Satin N4 Finish: Base Panel Side Wall 2 Total 04 Panels Including Base Panel Bronze Tinted Mirror, Standard Finish: 01 Panel Bonded Bronze, Dark Patina, Charleston Pattern: 02 Panels I Bronze Satin N4 Finish: Base Panel MINIMAL FRAME EXTRUSION MATERIAL/ FINISH: ALUMINUM / BLACK ANODIZED BACKER: FR PARTICLEBOARD WITH 0.025" ALUMINUM SEALER SHEET REVEAL STRIPS MATERIAL/FINISH: ALUMINUM /BLACK ANODIZE CEILING,CABFORMS,LEVEL-E,FSD,LG PASSANGER LIFT & VIP LIFT DESCRIPTION: (HSN: 84313100) NUMBER OF CABS:05 MODEL: 04 PANEL MATERIAL/FINISH: I BRONZE / SATIN N4 MOUNTING: TOP DESCRIPTION: SINGLE PANEL WITH POLYCARBONATE, FIRE-RATED BACKER ALSO INCLUDES EXIT PANEL, SINGLE CONDUIT BOX TO MOUNT TO CAB CEILING AND WIRING PANEL REVEALS: 1/8" MATTE BLACK EDGE EXTRUSION: BLACK ANODIZED LIGHTING: (4) 3*2W LED DOWN LIGHTS & LED EDGE PERIMTER INPUT VOLTAGE: AC 120-240V DIMENSIONS: UP TO 98"W X 70"D - ACTUAL DIMENSIONS PER F+S APPROVAL DRAWINGS EMERGENCY EXIT LOCATION: **TBD** PRODUCT: ELEVATOR HANDRAILS MODEL: 1.25" TUBULAR FLAT ENDS WITH INTEGRAL STANDOFFS DESCRIPTION: NUMBER OF CABS: 05 CONFIGURATION: CONTINUOUS WALLS: REAR WALL MATERIAL/FINISH: BRONZE/SATIN LENGTH: ACTUAL DIMENSION PER F+S APPROVAL DRAWINGS I BRONZE SATIN N4 PASSANGER LIFT & VIP LIFT PVC COATED ONE SIDE(Make Hydrox or Equivalent)

Providing of Aluminium Plain 300 mm wide x 30mm deep panel up to 6mtr, shall be roll formed out of 0.7mm thick Powder Coated The top coat of panel shall be 60 micron polyester coated finish. The panel shall be factory cut in up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cutout to hold on panel in a module of 300mm closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 300mm. 4mm dia galvanized rod with special height adjustment butterfly clips made out of SS steel sheet. The edge profile G.I. shall be matching with the panel.(Make Harsons Green or Equivalent)

Providing and fixing tiled false ceiling of approved materials of size 595x595mm in true horizontal level,suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized@120grams/sqm,both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet,spaced at 1200mm center to center and cross“T”of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600mm and secondary cross “T” of length 600mm and size24x25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of roved texture in the grid including, required cutting/making, opening for services like diffusers,grills,lightfittings,fixtures,smokedetectors. GIMetal Ceiling Lay in perforated Tegular edge global white color tiles of size595x595mm and0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100gms/sqm (both sides inclusive) and 20% perforation are a with 1.8mm dia holes and having NRC(NoiseReductionCoefficient) of 0.5, electrostatically polyester powder coated of thickness 60 microns(minimum),including factory paintedafterbendingandperforation,andbackedwithablackGlassfiberacoustical fleece.(Make Harsons Green or Equivalent)

Supply and installation of 6mm thick Max Compact Exterior grade ,F- Quality panels as per ASTM E84 & BS 476 part 7 standards . The panels shall be of standard size with Uni /Nature / Special finish with both side décor, Matt Finish. FunderMax Interior panels are duromer high-pressure laminates (HPL) as per EN 438-4 type EDF manufactured with norm conformity of EN 438-7 & testing methodologies as per EN 438-2 standards. The panels shall have Anti-Graffiti properties and are Thermally cured High Pressure Laminate Panels. Installation of Max Exterior panels shall be done by MBE Aluminum rivets ( with Fixed and sliding points)., with recommended Aluminum T Sections & L Sections held by Aluminum Wall brackets. The Aluminum Sections Shall be black anodized 20 micron thick. (Make: Fundermax or eq. as per makelist)

Supplying and installation of Pixel Pitch- P3.9mm LED screen 3500 X 2000 mm Material- Die Cast Aluminium Service Access- Front Magnetic Module Pixel Density- 65536 dots/M² Pixel Configuration- SMD2121Black Cabinet Dimension- (L) 500mm X (H) 500mm X (W) 60mm X 28 Nos Cabinet Resolution- 128 dots x 128 dots Module Dimension- 250mm x 250mm Module Resolution- 64 dots x 64 dots Viewing Distance- 3 Meter Cabinet Weight- 8.5kg/ cabinet Brightness- 1000 -1200 cd/M² Gray Scale- 16 bit (Depending on the system and IC configuration) Driver- ICN2053 (High refresh rate with high gray scale) Refresh Rate- ≥3840HZ Scan Rate- 1/8 Scaning, constant current Controller System- NOVASTAR Controller Software- NOVA Studio Viewing Angle- Horizontal ：120°, Vertical 120° Temperature Range (-/+)C°- 20 C° ~ 55 C° Humidity- 10 % ~ 95 % RH Life Span- 100000 Hours MTBF- 10000 Hours Power Consumption- Max : 600 w/m2 , Average : 200 w/m2 Input Voltage- AC110/220V , 50/60Hz Power Consumption- Max : 120 w/m2 , Average : 70 w/m2 Input Voltage- AC110/240V, 50/60 Hz.

Providing, fixing Installation & Fabrication of Thermopine Wooden Rafter size 42x140xR/L MM, & Finishing by exterior deck oil (Make- as per make list or eq. ) with all necessary hardwares as per the interior design and direction of the Atchitect

Providing & Fixing VENEER sheet of specified finish with reverse side of adhesive bonding quality including making of necessary groove and polishing with 3 coats of melamine polish complete including cost of adhesive of approved quality . The rate also icludes 50mmx50mm frame and 12mm thk water proof plyboard. (Make- Century or eq. as per make list)

Grease Separator EasyClean ground Standard NS 4, Based on Euro-Norm EN 1825-1,Manufactured from Polyethylene.For underground installation, installation depth 550 - 950 mm, with integrated sludge trap, polymer upper section, vertically adjustable, rotatable and tiltable up to 5°, cast iron cover in load class B based on EN 124, odor tight. Ø 110 in- and outlet according to DIN 19534,Sludge trap capacity: 400 l,Total separator capacity: 370 l,Fat storage: 160 l, Certification: Z-54.1-440, Weight: 130 kg,Dimension: 1470 x 1300 mm

Providing and fixing in position C.P.teak wood cornice of size 30cm high of various type of C.P. teak wood moulding fixed on 12mm thick BWP commercial ply of size 30cm and 15cm wide fixed on wall with the help of rawl plug/Dash fastner @ 30cm C.C. The 12mm thick BWP commercial ply is supported with 19mm thick BWP block 8 cm wide, 12mm thick commercial ply panelled with 120x12 mm moulding at centre and 75x25 mm moulding of C.P.teak wood below & above the centre moulding. this is further panelled with 25x12mm additional moulding of at top of 75x20mm moulding. The bottom edge shall be sealed covered with 20x20mm C.P.teak wood moulding. The cornice shall be finish with matt finish melamine polish in required shade & colour complete as per architectural drawings & direction of Engineer-in-charge.

Providing and fixing door profile made of laminate wood of required size and shape of Quick Step (New Classic Series)/ Pergo (Living Expression Series)/ Greenpanel wood floors (Premium Series) at edge of wooden Flooring at door entrance to eliminate level difference between existing Floor and wooden Flooring and to cover the edge of wooden Flooring with necessary nails and adhesive complete as per manufacturer's recommen dation complete.

Providing and fixing quarter round edge profile of Quick Step (New Classic Series)/Pergo (Living Expression Series)/Greenpanel wood floors (Premium Series) or equivalent) (sample will be approved by engineer in charge) on top of wooden skirting to hide edge of flooring plank of ajoining point of wall and flooring with necessary nails etc. complete and as per recommendation of manufacturer complete.

Providing & fixing Open cell (100x100mm) ceiling tiles onto 15mm Tee Grid. Access can be gained by simply lifting the tiles our of the grid. The new Lock-In system features open cell ceiling panelswith no frame or border around them. The panels simply connect to ach other with easy lock in system of main and cross. (Make- as per make list or equivalent)

Providing & fixing Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x 25 x 3600mm in Wood grain finish – Pradoo & Cabrueava. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm.( Baffle Spacing-150mm ) Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. (Make- as per make list or equivalent)

Providing & Fixing 25MMX25MM PINE WOOD BATTENS of specified finish with screws and polishing with 3 coats of melamine polish complete on 12mm ply board as per instruction of the Architect. (Make- as per make list or equivalent)

Supply , Installation, Testing and Commisioning of maintainance free Moss Wall of size 600 x 400 mm panel of natural light green color/ shade.The plant shall be for indoor use only and requires no Direct Sun Light orWatering / Spraying of water.The price is inclusive of installation of the panels on the wall, screws, and allaccessories required including back plate complete in all respect as per thesatisfaction of engineer in charge.Size 400X600mm (Price /sqft)

Curtains Providing and fixing Blackout Roller Blinds with Ball Chain Opration and Manual Fitting and Fixing with approved colour , shade & materials Item code- TOS- 03/ CHAMOIS-75MMTOS-02/ ASTORIA-75MM/ L-EBONY/ S-252-12 Size :2400 x 2400

Providing and fixing Blackout Roller Blinds with Ball Chain Opration and Manual Fitting and Fixing with approved colour , shade & materials Item code- TOS- 03/ CHAMOIS-75MMTOS-02/ ASTORIA-75MM/ L-EBONY/ S-252-12 Size:900 x 2400

Providing and fixing Sheer + Main Roman Blind With Value Addition On Main Roman Blind and Manual Fitting and fixing for Imported Roman Blind Mechanism with Ball Chain Operation Item Code- S-261-09/ S-252-12 Size :2400 x 2400

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs. Room Types (1st floor ) Suite type - 1 Item Code- S-261-12/ S-261-06/ S-252-12/ S-261-06/ S-252-11/ 241

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs. Room Types (1st floor ) Suite type - 2 Item Code- S-261-12/ S-261-06/ S-252-24/ 241

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs. Room Types (1st floor ) Suite type - 3 Item Code- S-252-12/ S-252-24/ 241

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs. Room Types (1st floor )Suite type - 4 Item Code- S-252-12/ 241

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Room Types (2nd floor ) Guest Bedrooms cum Twin bed Item Code- S-252-12/ S-252-24/ 241

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designsRoom Types (3rd floor ) Item Code- S-252-24Gent's Dormitory

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Ladies Dormitory

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Divers/Cook Room

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Group B & C

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Adjacent Building Dormitory Item Code- S-252-24.Male Dormitory

Stitching , Supply and Installing at site of heavy Sheer curtains APL, Main curtain APL + Blackout Lining + Quilted Border . Fullness to be 200% & Other Necessary Fitting Ect. Shade, Color & pattern design as per approved designs.Adjacent Building Dormitory Item Code- S-252-24.Female Dormitory

Supply of cushions - 100% polyfill with poly cotton. Cushion cover with Lining & Ykk Zip. Design, shade & Color as per the approved design. Cushion 18"x18"

Supply of cushions - 100% polyfill with poly cotton. Cushion cover with Lining & Ykk Zip. Design, shade & Color as per the approved design. Cushion cover 18"x18"

Supply of cushions - 100% polyfill with poly cotton. Cushion cover with Lining & Ykk Zip. Design, shade & Color as per the approved design. Cushion 24"x24"

Supply of cushions - 100% polyfill with poly cotton. Cushion cover with Lining & Ykk Zip. Design, shade & Color as per the approved design. Cushion cover 24"x24"

Bed Side Table Providing and supply of bed side table dimension- 1'-10" x 1'-4" wooden side table made of 3/4" thick ISI mark board (Century or . eq) with one drawer with 1mm thick laminate (Century or . eq) as per architect sel. pasted on outer surface & inside. laminate as per architect sel. to be approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-ST01 or equvalent as per make list)

Carpet/ Rug: Providing & installation of 8' x 4' size knotted pile carpet of bright self pattern, 3500 gsm & color, approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Kaara or equivalent as per makelist)

Coat Stand: Providing a coat hanger made of cylindrical wooden rod with 8 arms at different levels to be used for hanging clothes with a wooden circular base as a stand. Finish as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-CH04 or equvalent as per make list)

Pantry Counter- (PC1) Providing & fixing wooden pantry made in 3/4" thick board (isi mark) with Pu polished -Veneer on outside & laminate inside (century or eq.). Hardware & fittings shall be of SS (Make-Hafele blum or eq.) Pantry counter top shall have Corian finish (Dupont or Eq.). The design & detail of the cabinets & drawers shall be as per the approaved make, design & drawing by the arch./client. The pantry besides wood work shall have provision for refrigerator. The pantry shall be complete in all respect catering to all above mentioned & other necessary items and shall be exactly as per the approved make, design and detail florish by the architect/client. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-MK08 or equivalent as per make list)

Outdoor seating table: Providing & supply of Interblocco or eq wicker outdoor table with metal frame base & handwoven synthetic fiber and 8mm thick clear glass on top. Color approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make interblocco- LUNAR or equivalent as per makelist)

Outdoor seating chair: Providing & supply of Interblocco or eq. - wicker outdoor chair with metal frame base & handwoven synthetic fiber and 4" thick waterproof foam for chair seat. Color approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make interblocco- FUBE or equivalent)

Library book shelf: Supplying & keeping in place of customized book shelf. The book shelf shall be made in 3/4" thick board (Century or eq.) (isi mark) finished with PU polished Veneer (Century or eq.) on outside and laminate inside as per architect sel. The shelf shall be complete in all respect with all necessary hardwares & fittings approved as per the make & as per approved design by the architect/client. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-BS02 or equvalent as per make list)

Conference room chairs: Providing & Supplying High Back revolving chair upholstered with Leatherite. The seat and back are made up of 1.2cm thick hot pressed plywood upholstered with leatherite and moulded Polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 550mm (W) x 570 mm(H). SEAT SIZE: 500mm(W) x 500mm(D). Overall Height of chair is 990mm .The seat and back are Joined together. The armrest assembly comprises of Chrome with cushion on top which is connected and bolted to both seat and back . The chair has TORSION BAR MECHANISM. The Chair base is made of Chrome Polished finish and is fitted with 5nos. twin wheel castors. The colour of Leatherite shall be as per instructions of Architect approval. The work shall be carried out under the guidance and instructions from Architect and Engineer Incharge.( Make- HNI or eq. as per makelist)

Administrator cabin main chairs: MAIN CHAIR- SENATOR H/B IN PREMIUM LEATHER EURO NAPPA CENTRE COURT (AS PER SAMPLE). (Make Stanley)

Administrator cabin chairs: VISITOR CHAIR FOR ADM CABIN ROOM- SENATOR L/B IN PREMIUM LEATHER EURO NAPPA CENTRE COURT (AS PER SAMPLE). (Make Stanley)

Administrator- desk AFC-044 or equivalent :- (Main Desk - 2100X900X750 MM+ Side Table 1200X450X750 MM + Pedestal + Back Unit- 2100X450X750 MM) Top shall be of 36 mm thick prelaminated particle board with veneer finish. GABLE ENDS :- shall be of 25mm thick prelaminated particle board with veneer finish. MODESTY:- shall be of 18mm thick prelaminated particle board with veneer finish. WIRE CARRIER :- Powder coated wire carrier to be provided for arranging wires for electricity & data . WIRE RISER:- Powder coated wire riser to be provided for raising wires form floor FLAPPER:-Powder coated flapper flushed with top MOVABLE DRAWER SIZE - 400x450x680mm :- 18mm thick PLPB board with veneer finish.

RECEPTION/ GYM- main chair Providing and supplying High Back Chair with head rest .The curvature Corresponds to natural curves of spine and supports lumber assuring supreme comfort and no upper - body strains.This is a High back chair with Mesh Back with back tilt tension adjustable . The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair has 1-D adjustable armrests . Seat size is 500 mm W x 515 mm D and the Chair Height 1135mm - 1225mm . Overall size of the chair is 640mm W x 665mm D x (985 mm- 1220mm) H . The PU foam used for chair seat is fire retardant . The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years. The work shall be carried out under the guidance and instructions from Architect and Engineer Incharge. (Make- HNI or equvalent as per make list)

OFFICE WORKSPACE- chair Providing and supplying Medium Back Chair with Curvature Backrest.The curvature Corresponds to natural curves of spine and supports lumber assuring supreme comfort and no upper - body strains. This is a Medium back chair with Mesh Back with back tilt tension adjustable . The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair comes with 1-D adjustable armrests . Seat size is 500 mm W x 515 mm D and the Chair Height 975 mm - 1070 mm . Overall size of the chair is 640mm W x 665mm D x (975 mm- 1070mm) H . The PU foam used for chair seat is fire retardant . The chair has Pneumatic Gas Lift with Stroke=85 mm . . Chair carries a warranty of 5 years. The work shall be carried out under the guidance and instructions from Architect and Engineer Incharge. (Make- HNI or eq. as per makelist)

Seminar Hall- Chairs Make- AFC-137 or eq. as per makelist Castor Nil Base Powder Coated Mechanism Nil Arm Rest Metal with Cushion Tapestry Leatherite

4 Seater Dining Table (VIP Rooms) Providing 4 seater dining table dimension 4'-0" x 2'-6" with 12mm thick Dupont or eq. Acrylic Solid Surface/Veneer in High Gloss PU top & 2" X 8" thick wooden legs in teak wood with top coating- sirca sealer with sirca pu-gloss finish on top, also with wooden legs as shown in image. PU Color to be approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-DT11 or eq. as per make list)

Dining Chair(VIP Rooms) Providing and supply of dining chair internal structure in flexible teak wood with 40 density feather foam upholstered at inner & outer side & 1.5" thick wooden leg in teak wood, leg coating is sirca sealer with sirca PU-High Gloss finish. Leatherite of Imporio or eq. approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-DC24 or eq. as per make list)

Sofa Side Table: Providing wooden circular side tables dimension 1'-10" x 1'-10" x 2'-0" in teak wood, with 4 mm thick Veneer (Century or eq.) as per architect sel. pasted on top. Veneer as per architect sel. shade approved as/ Architect - - complete in all respects with High Gloss PU Polish. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-SST04 or eq. as per make list)

Suite/Deluxe - Single seater Providing and supply of single seater fully upholstered sofa as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF22 or eq. as per makelist)

Suite/Deluxe Sofa- 2 seater Providing and supply of two seater fully upholstered sofa as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF26 or eq. as per makelist)

Suite/Deluxe Sofa- 3 seater Providing and supply of three seater fully upholstered sofa as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF28 or eq. as per makelist)

Study table including pencil drawer unit Providing and supply of teak wooden study table of dimension- 3'-6" x 1'-8" x 2'-6" made of solid teak wood with veneer (Century or eq.) as per architect sel. finish on top with one drawer in Veneer as per architect sel. finish inside. laminate (century or eq.) as per architect sel.- 1mm thick approved as/ Architect - - complete in all respects with High Gloss PU Polish. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-ST20 or eq. as per makelist)

Study table/ TV unit: Providing and supply of teak wooden study table of dimension- 9'-3" x 2'-6" x 2'-6" made of solid teak wood with veneer (Century or eq.) as per architect sel. finish on top with one drawer in Veneer as per architect sel. finish inside. laminate (century or eq.) as per architect sel.- 1mm thick approved as/ Architect - - complete in all respects with High Gloss PU Polish. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-ST26 or eq. as per makelist)

Study Chair: Providing and supply of dining chair internal structure in flexible teak wood with 40 density feather foam upholstered at inner & outer side & 1.5" thick wooden leg in teak wood, leg coating is sirca sealer with sirca PU-High Gloss finish. Leatherite of Imporio or eq. approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make- Moreinside-DC24 or eq. as per make list)

Suite/Deluxe- Centre Table 48 INCHES BY 36 INCHES BY 13 INCHES . in solid teak wood , veneer of approved make (Century or eq.) and ply / High Gloss polish The work shall be carried out as per guidance and instructions received from Engineer Incharge and the prodect should be from BIFMA/ ISO 14001 certified company. (Make: Moreinside-CT11 or eq. as per makelist)

Administrator Sofa- Single seater Providing and supply of single seater fully upholstered sofa as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF11 or eq. as per makelist)

Administrator Sofa- 2 seater Providing and supply of two seater fully upholstered sofa as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF21 or eq. as per makelist)

Bedroom Couch: Providing and supply of two seater fully upholstered couch as per more design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-SF14 or eq. as per makelist)

Administrator- Centre Table 48 INCHES BY 36 INCHES BY 13 INCHES . in solid teak wood , veneer of approved make (Century or eq.) and ply / High Gloss polish The work shall be carried out as per guidance and instructions received from Engineer Incharge and the prodect should be from BIFMA/ ISO 14001 certified company. (Make: Moreinside-CT14 or eq. as per makelist)

Console: Providing Console table dimension 4'-6" x 1'-0" x 3'-0" in 3/4" board (isi mark) with mdf & veneer pasted on top, as per design refernce shown, coating is sirca sealer with sirca PU-matt finish. Pu color approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-CON09 or eq. as per makelist)

Dressing Table: Providing Dressing table dimension 4'-6" x 1'-0" x 2'-0" in 3/4" board (isi mark) with mdf & veneer pasted on top, as per design refernce shown, coating is sirca sealer with sirca PU-matt finish. Pu color approved as/ Architect - - complete in all respects with 6mm extra clear Mirror (Make: Glaasik or eq.) pasted on Ply (Make: Century or eq.). The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside- DT21 or eq. as per makelist)

Reception desk: Providing of reception table of SIZE-2000X600X1150 to made in 19mm Commercial board and finished with corian (Dupont or eq.) .the company's logo to be CNC cut in corian and back lit as per Architect approval and as per interior drawing.The rate to include providing and fixing Stainless steel handles, knobs, locking arrangements, magnetic catchers, slow motion hinges etc. complete in all respect. (Make: Moreinside-RE17 or eq. as per makelist)

Dining counter size as per interior drawing Providing cafeteria counters of size 4000X750MM with top in 3/4" thick board (isi mark) in laminate as per architect sel. finish & legs in MS with black powdercoating. laminate as per architect sel. approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge

Dininng table-2 seater Providing 2 seater dining table dimension (610 x 750 x 760)MM with 12mm (Dupont or eq. ) corian on top made & wooden base in teak wood frame covered with 12 mm ply & mdf outer with coating is sirca sealer with sirca pu-matt finish. PU Color to be approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-DT22 or eq. as per makelist)

Dininng table-4 seater Providing 4 seater dining table dimension (1220 x 750 x 760)MM with 12mm (Dupont or eq. ) corian on top made & wooden base in teak wood frame covered with 12 mm ply & mdf outer with coating is sirca sealer with sirca pu-matt finish. PU Color to be approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-DT27 or eq. as per makelist) this is wot has been

Executive Dininng Chair-1 seater Providing and supply of single seater fully upholstered Chair as per Architect design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden leg in teak wood,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-DC29 or eq. as per makelist)

Dining Sofa: Providing and supply of 3 seater fully upholstered Continous Sofa as per Architect design, internal structure is in teak wood section 2" x 2.5" , with 40 density of feather foaming, wooden base bax in teak wood Ply of 19mm,with sirca black high gloss PU Polish coating ,Fabric (Make- Harley or eq.) approved as/ Architect - - complete in all respects with cushions upholstered. The work shall be carried out as per guidance and instructions received from Engineer Incharge (Make: Moreinside-CS20 or eq. as per makelist)

Dining Chair: Providing and supply of Dining chair internal structure in teak wood with 40 density feather foam upholstered at inner & outer side &1.5"x 1.5"wooden base & leg in teak wood, leg coating is sirca sealer with sirca PU-matt finish. Fabric/Leatherite approved as/ Architect - - complete in all respects. The work shall be carried out as per guidance and instructions received from Engineer Incharge. (Make: Moreinside-DC32 or eq. as per makelist)

Dining POS table: Providing and fixing wooden reception counter size 2000X1150X800 MM for Dining POS, made out of 19MM BWR Board (Century or eq.) all over in structure i/c 4 MM thk veneer (Century or eq.) fixed over 12 MM thk MDF to get groove design as directed. Counter top is furnished with 12 MM thk solid acrylic base (Dupont or eq.) surface at 750 MM and 1150 MM level. item include all necessary hardwares. nails, screws, adhesives, telescopic channel i/c melamine polishing over veneer and laminate to be fixed on all internal surfaces complete. (Make: Moreinside RE07 or eq. as per makelist)

Sports Treadmill: Console Feature:- Motor :3.0 HP Ac Motor, Speed Range :1~18KM, Incline Range :Front Power Incline / 0 - 15 Level, Computer Display:Multi -LCD 6.5" window for time, speed, incline, distance, program, calories, pulse Computer Programs :Manual, 9 Programs (P1-P9), 2 User,2 HRC, Muscleman, Heat rate bar,5 Quick keys for Speed, 5 Quick Key for Incline, Quickly Buttom :Speed - 2, 4, 6, 8, 10 ; Incline - 2, 4, 6, 8, 10, Black Light: YES, Hand Pulse: YES, Speed / Incline Toggle Switch :YES, FAN :YES, Frame:- Folding :NO, Moving Wheels :2 x Moving Wheels, Running Surface :560 *1525 MM, Cusion Deck :YES / 6 Cushion Pads, Xtra Soft Cushion :YES, Running Mat:Anti- Static / 1.6 mm, Product Size :1960*895*1365 MM, Carton Size:2070*920*440 MM, Product Weight N.W :98 KGS, Product Weight G.W :108.2 KGS, Max User Weight :150 KGS. (Make: Afton or eq.)

Indoor bike: Set up size: 125.5*62*131.5CM (L*W*H), Frame:Steel tubing with matt black finish, Plastic cover: Matt black plastic with neon green highlights, Flywheel: Φ468mm/20kgs, Drive system: Smooth and quiet belt drive (PK5), Resistance:Magnetic with variable-resistance control knob, Crank: 3 piece chrome-plated crank, Stand cap: Front: Transportation wheels & height adjustableRear: Height adjustable, Seat Velo: VL-6100M -Gel-filled memory foam. Black&neon green, Pedal Well-go : LU-934. Deluxe model with toe cages and straps, Bottle rack: Adjustable, fork-mounted aluminium holder, Base tube: Matt black finish, Front stabilizer: Neon green paint/ matt black plastic caps, Rear stabilizer: Neon green paint/ matt black plastic caps, Handlebar height: Chrome-plated steel pipe with a pulland turn adjustment knob, Handlebar: EVA grip with aero riser and bar ends, Seat post: Chrome-plated steel pipewith vertical and fore-and-aft adjustment. (Make: Afton or eq.)

Dumbbell rack-4' -LWH:1372X473X869 mm (54X18.6X32.4 in) -N.W.: 41 kgs

Dumbell Rack 2.5 kg x2 Nos =5 kgs 5 kg x 2 Nos = 10 kgs 7.5 kg x 2 Nos = 15 kgs

Olympic bench -LWH:1438X1264X1468 mm (56.6X49.8X57.8 in) -N.W.: 61 kgs

Half cage Smith attachment IFHCS half cage smith attachment -LWH: 1946X300X1727 mm (76.6X11.8X68 in), N.W. - 42 kgs

PVC yoga mat 6mm

KITCHEN FIXTURES, EQUIPMENTS & APPLIANCES WORK TABLE WITH UNDER SHELF-18X30X34 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top in Stainless Steel 18 gauge 304 grade and Under shelves in Stainless Steel 20 gauge 304 grade and legs made of 40x40mm Square SS pipe of 304 grade with with nylon height adjuster provided. (Make- Singh refrigeraton SRW-T02 or equivalent as per make list)

S.S. TANDOOR_Charcoal-30X30X34 inch Specification:-Frame work in 35x35x5mm MS angle. Top made of 18 gauge 304 grade SS and cladding in 20 gauge J-4 grade SS. Unit shall be mounted on heavy duty castors. (Make- Singh refrigeraton SRW-TN02 or equivalent as per make list)

S.S. EXHAUST HOOD WITH FILTER - 72X36X20inch Specification:- Made of Stainless Steel 20gauge J-4 grade and all baffle filters shall be in 20 & 22 GA 304 grade SS with oil collection trays and provision for hanging. (Make- Singh refrigeraton SRW-EX06 or equivalent as per make list)

SINGLE SINK UNIT - 24X24X34+6 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Sink bowls , top along with 6” high splash made of 16GA 304 grade SS. legs made of 40x40mm SS 304 grade Square and cross bracing in 32x32mm SS square of 304 grade with nylon height adjuster provided. (Make- Singh refrigeraton SRW-S2 or equivalent as per make list)

TWO BURNER INDIAN RANGE - 48X24X34 inch Specification:-Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top made of Stainless Stell 18 GA 304 grade and Under shelf Stainless Steel 20gauge 304 grade and dip tray made of Stainless Steel 20 gauge 304 grade. Vertical support shall be in 40x40mm SS square of 304 grade with with nylon height adjuster provided. Detachable type heavy duty cast iron of 18”x 18”, 2 No. heavy duty Model – M-50 burner and 2 Pilot burner along with individual gas control valves of Indian Oil companies approved brand. (Make- Singh refrigeraton SRW-BN01 or equivalent as per make list)

STOCK POT STOVE - 24X24X24 inch Specification:-Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top made of 18 GA 304 grade SS and paneling and dip tray made of 20 GA 304 grade SS. Legs and cross bracing shall be in 40x40mm and 25x25mm SS square of 304 grade. Detachable type heavy duty cast iron of 18”x 18”, 1 No. heavy duty Model – M-50 burner and 1 Pilot burner along with individual gas control valves of Indian Oil companies approved brand. (Make- Singh refrigeraton SRW-BN24 or equivalent as per make list)

S.S. EXHAUST HOOD WITH FILTER - 84X30X20 inch Specification:- Made of Stainless Steel 20gauge J-4 grade and all baffle filters shall be in 20 & 22 GA 304 grade SS with oil collection trays and provision for hanging. (Make- Singh refrigeraton SRW-EX07 or equivalent as per make list)

WORK TABLE WITH UNDER SHELF - 36X24X34+6 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top in Stainless Steel 18 gauge 304 grade and Under shelves in Stainless Steel 20 gauge 304 grade and legs made of 40x40mm Square SS pipe of 304 grade with with nylon height adjuster provided. (Make- Singh refrigeraton SRW-T08 or equivalent as per make list)

2+1 CHINESE RANGE - 60X30X30+18 inch Specification:-Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top made of Stainless Stell 16 GA 304 grade. Top along with 18” high splash Stainless Steel 16gauge 304 grade and Under shelf Stainless Steel 20gauge 304 grade and dip tray made of Stainless Steel 20 gauge 304 grade. Vertical support shall be in 40x40mm SS square of 304 grade with with nylon height adjuster provided. Detachable type heavy duty cast iron of 18” dia-2 No. & cast iron 8"x8"-1 No. heavy duty Model – T2-2Nos and T1-1Nos burner and 3Nos Pilot burner along with individual gas control valves of Indian Oil companies approved brand. (Make- Singh refrigeraton SRW-BN27 or equivalent as per make list)

S.S. EXHAUST HOOD WITH FILTER - 66X36X20 inch Specification:- Made of Stainless Steel 20gauge J-4 grade and all baffle filters shall be in 20 & 22 GA 304 grade SS with oil collection trays and provision for hanging. (Make- Singh refrigeraton SRW-EX05 or equivalent as per make list)

WORK TABLE WITH UNDER SHELF - 18X45X34+6 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top in Stainless Steel 18 gauge 304 grade and Under shelves in Stainless Steel 20 gauge 304 grade and legs made of 40x40mm Square SS pipe of 304 grade with with nylon height adjuster provided. (Make- Singh refrigeraton SRW-T02 or equivalent as per make list)

DEEP FAT FRAYER _ TABLE TOP - 5 LTRS. Specification:-Unit made SS 304 grade sheet with shall three side covering 22 SWG sheet . Electrical Element 2 Kw thermo state & Rotary switches indicator provided. (Make- Singh refrigeraton SRW-HEF-6L or equivalent as per make list)

MICROWAVE OVEN _IMP ITEM. (Make- Singh refrigeraton CE1041DSB2/TL or equivalent as per make list)

SANDWICH GRILLER - Single Specification:-Volt-220V-240V/50-60Hz, Weight-13.8, Power-1.8 Kw (Make- Singh refrigeraton HEG-811 or equivalent as per make list)

MEAKLINE UNIT - 60X30X34 inch Specification:-Frame work 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Inner body in Stainless Steel 24 Gauge 304 grade, exterior body in 20 GA 304 grade SS. Work top made of Stainless Steel 18 gauge 304 grade with Top Cold Bainmarie 100mm deep. PUF insulated Spring loaded self closing doors with built-in handle. High density PU insulation, Kirloskar Copeland make cooling unit. Vertical support 40x40mm Sqr Pipe with nylon height adjuster provided. (Make- Singh refrigeraton SRW-MK03 or equivalent as per make list)

G.N. PAN WITH LID FOR MEAKLINE UNIT - 1/6*100mm Specification":- Made of Food Grade Stainless Steel 22gauge 304 grade. (Make- Singh refrigeraton or equivalent as per make list)

DOUBLE OVER HEAD SHELF - 60X12+18+12 inch Specification:- Shelf Stainless Steel 20 gauge 304 grade and Vertical Support 1" dia SS Pipe with Electrical Element 2 Kw thermo state & Rotary switches indicator provided. (Make- Singh refrigeraton SRW-OV878 or equivalent as per make list)

UNDER COUNTER REFRIGERATOR - 60X24X34 inch Specification:-Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Inner body in 22 GA 304 grade SS, exterior body in 20 GA 304 grade SS. Work top made of 18 GA 304 grade SS. PUF insulated Spring loaded self closing doors with built-in handle and lock. High density PU insulation, Kirloskar Copeland make and cooling unit.(Make- Singh refrigeraton SRW-UN03 or equivalent as per make list)

DOUBLE OVER HEAD SHELF - 60X12+18+12 inch Specification:- Shelf Stainless Steel 20 gauge 304 grade and Vertical Support 1" dia SS Pipe with Electrical Element 2 Kw thermo state & Rotary switches indicator provided. (Make- Singh refrigeraton SRW-OV878 or equivalent as per make list)

TWO DOOR REFRIGERATOR - 30X30X82 inch Specification: Double walled made of Stainless Steel 20 swg J4 grade sheet with puff insulation with Kirloskar Copeland compressor. Side & back is covered with 22 swg ss sheet ss door with insulation, handle gasket & hinges. Inner tank made of 24 swg ss304 sheet having ss rod shelves. A Compressor unit is in the upper part of the machine with ss grill & the control panel with thermostat. (Make- Singh refrigeraton SRW-TW22 or equivalent as per make list)

DISH LAINDING TABLE WITH GARBAGE CHUTE - 54X18X34 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top in Stainless Steel 18 gauge 304 grade and top 9 inch dia cut-out for garbage. legs made of 40x40mm SS 304 grade Square and cross bracing in 32x32mm SS square of 304 grade with nylon height adjuster provided. (Make- Singh refrigeraton SRW-DT02 or equivalent as per make list)

THREE SINK UNIT - 60X24X34X+6 inch Specification:-Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Sink bowls, Top along with 6” high splash made of Stainless Steel 16gauge 304 grade. legs made of 40x40mm SS 304 grade Square and cross bracing in 32x32mm SS square of 304 grade. (Make- Singh refrigeraton SRW-T47 or equivalent as per make list)

WALL SHELF DOUBLE - 60X12X24 inch Speification:- make of Stainless Stell 20gauge 304 grade. (Make- Singh refrigeraton SRW-WL01 or equivalent as per make list)

WIPPING TABLE WITH UNDER SHELF - 30X18X34 inch Specification:- Frame work: 35x35x5mm MS angle coated with high quality corrosion resistant metallic primer and paint. Top in Stainless Steel 18 gauge 304 grade and Under shelves in Stainless Steel 20 gauge 304 grade and legs made of 40x40mm Square SS pipe of 304 grade with with nylon height adjuster provided. (Make- Singh refrigeraton SRW-T22 or equivalent as per make list)

CLEAN DISH RACK_ 5 SHELF - 36X18X72 inch Specification:- Uprights of the unit shall be in Stainless Steel square Pipe 40x40mm 18GA 304 grade and shelves in 18 GA 304 grade SS. All the shelves shall have additional supports with SS channels. (Make- Singh refrigeraton SRW-CR05 or equivalent as per make list)

FOUR DOOR REFRIGERATOR - 48X30X82 inch Specification: Double walled made of Stainless Steel 20 swg J4 grade sheet with puff insulation with Kirloskar Copeland compressor. Side & back is covered with 22 swg ss sheet ss door with insulation, handle gasket & hinges. Inner tank made of 24 swg ss304 sheet having ss rod shelves. A Compressor unit is in the upper part of the machine with ss grill & the control panel with thermostat. (Make- Singh refrigeraton SRW-TW24 or equivalent as per make list)

DEEP FREEZER _IMP - 330 LTRS. (Make- Singh refrigeraton SRW-CD03 or equivalent as per make list)

S.S. STORAGE RACK - 36X18X72 inch CLEAN DISH RACK_ 5 SHELF Specification:- Uprights of the unit shall be in Stainless Steel square Pipe 40x40mm 18GA 304 grade and shelves in 18 GA 304 grade SS. All the shelves shall have additional supports with SS channels. (Make- Singh refrigeraton SRW-CR08 or equivalent as per make list)

FRESH AIR SYSTEM - CROMPTON Motor:- 5 H.P./ 960 RPM. III Phase. 8000 CFM Foundation from client site Double Skin Packaged type air washer having capacity complete with 1 No. Motor 7.5 HP, 1 No. Centrifugal blower Forward Curved, SS Tank, pre filter, evaporative cooling pad, 1 Nos.Monoblock pumps and its all required accessories like common base frame, fan pulley, motor pulley- belts, Vibration isolator etc. (Make- Singh refrigeraton SRW-FA029 or equivalent as per make list)

SCRUBBER HEIGHT 4 FEET WIDTH UNIT-SS TANK 20 SWG 304 GRADE WITH WATER PUMP - CROMPTON Motor:-7.5H.P./ 960 RPM. III Phase.10000 CFM Foundation from client site Fabricated out of heavy mild steel sheets & Plates, reinforced with angle irons for sturdy and smooth performance. Fan directly mountain on motor shaft for better performance, specially designed for kitchen exhaust. (Make- Singh refrigeraton SRW-SC24 or equivalent as per make list)

Sheet Size 8*3 feet per sheet: GI Ducting Work Complete with MS Frame, Bracing, Support and Rods for Exhaust & Fresh Air. (Make- Singh refrigeraton SRW-05 or equivalent as per make list)

As per Duct Size: Aluminium Double Deflection Air Grille (Make- Singh refrigeraton SRW-AL05 or equivalent as per make list)

As per Duct Size: MS Damper (Make- Singh refrigeraton SRW-D08 or equivalent as per make list)

Jindal / TATA make C-Class LPG PIPE LINE with Accessories Cost (Make- Singh refrigeraton SRW-LP or equivalent as per make list)

5+5 CYLINDER MS ANGLE FRAME WORK WITH TWO DOOR LOCKABLE FOR GAS BANK (Make- Singh refrigeraton SRW-CY-10 or equivalent as per make list)

AUTOMATION Supply, Installation, Testing of PIR 360 Degree Ceiling Mounted Presence Motion detector - with 1 NO & NC Contact of 230 Vac, Detetction range of 7 meter at height of 2.5 meter height

Supply, Installation, Testing of DALI Controller 3 Loop, every Loop can control of 64 DALI Ballast/Fixture. Max 16 Zones per Loop

Supply, Installation, Testing of 12 Channel Relay for Power Up Lights

Supply, Installation, Testing of PIR 360 Degree Ceiling Mounted Multi Sensor having Occupancy/Motion and Daylight sensing programmable type Sensor

Supply, Installation, Testing of 6 Button Automation Keypad for Scene Control/ Mood Control with Communication Module

Supply, Installation, Testing of Power Supply 1.5A DC to prower up Sensor and Keypad

Supply, Installation, Testing of 2 x 1.5 sqmm wire for DALI Signal

Supply, Installation, Testing of Cat 6 Wire to connect Automation Components

Supply, Installation, Testing of Automation DB with Protection Devices, MCB DP, ELCB DP, Surge Arrestor DP (All 1 no each) and SP MCB 12 nos

Supplying and stacking of well decayed cattle manure at site including royalty and carriage

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.

Supplying & planting of healthy Palm , (ornamental trees) free from diseases & of specified type & height/caliper at required spacing as per drawing. Washingtonia filifera (+2.5 meter stem height )

Supplying & planting of healthy Palm , (ornamental trees) free from diseases & of specified type & height/caliper at required spacing as per drawing. specimen plant, having 45 to 50 fresh and healthy leaves, having 30cm to 35cm circumfrance of base stem well developed in cement pots. Cycas revolta (+0.5 meter stem height )

Supplying & planting of healthy Palm , (ornamental trees) free from diseases & of specified type & height/caliper at required spacing as per drawing. Zamia palm (+ 40 leaves stems )

Providing and Displaying Nolina plant well developed , 3-5ft height. Round ball having dia +70cm Cement/E. Pot as per the direction of the officer-in-charge.

Providing and Displaying Raphis palm well developed in cement pots with 30 to 35 suckers. 4 ft and above height as per direction of the officer-in-charge.

Providing and Displaying Furcaria variegated plant well developed with fresh & healthy foliage 8 to 10 leaves in cement/ Earthen Pot as per direction of the officer-in-charge.

Supplying & planting of healthy shrub saplings, free from diseases & of specified type & height at required spacing as per drawing Dinella variegated

Supplying & planting of healthy shrub saplings, free from diseases & of specified type & height at required spacing as per drawing Asparagus sprengerie

Supplying & planting of healthy shrub saplings, free from diseases & of specified type & height at required spacing as per drawing Seaforthia Palm

Supplying & planting of healthy shrub saplings, free from diseases & of specified type & height at required spacing as per drawing Ficus black 4-5 ft height

maintenance period complete 1 year.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-In- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-In-charge).

INDOOR LANDSCAPING- Spathiphyllum • An adaptable houseplant (indoor) that will do well in both light shade or brightly lit spaces. • Average Temp 15 - 21 Deg. • Height - 45cm

Areca Palm • Indoor plant • Height - Approximately 12 inches in overall height, from bottom of pot to top leaf and 4-6 inches spread. •Air Purifier: Yes (One plant in 6 to 8-inch diameter containers can clean the air in roughly 100 square feet of floor space)

Aglaonema • Indoor plant •Height & Spread - 10″ to 3′ tall, similar spread •Light - Low to moderate, can tolerate short periods of bright indirect light

Seaforthia Palm • Indoor plant •Manageable sized palm with a slim, columnar trunk ringed with leafs •Height - 3' - 6'

Golden Pothos or Money plant : • It is a vining plant that is super easy to care for. They easily grow and spread over a wide length of the wall. • Botanical name: Epipremnum aureum • Light and temperature: money plant prefers indirect light and will tolerate low light; thrives better in humid areas such as bathroom walls and various indoor spaces. • Soil: grows best in fertile loamy soil of pH range 6.0 7.5; • Water: watering every 5 to 7 days when the top 2 inches of soil is dry.

Peace lily: • Peace lily is used in a vertical garden owing to its quickly growing ability. Easy to grow as they are tolerant to lower light and low humidity. • Botanical name: Spathiphyllum wallisii • Light and temperature: bright to medium light; 65 80 degrees F temperature • Water: water at least once a week and spritz the leaves with distilled water throughout the summer growing season • Flowers: white • Height - 45cm

Chinese Evergreens: • It is a highly decorative plant that is super easy to care for. Generally it comes in two colour pink and white. • Botanical name: Aglaonema • Light and temperature: variegated plant prefers indirect light and will tolerate low light; thrives better in humid areas. • Soil: grows best in fertile loamy soil of pH range 6.0 7.5; • Water: watering every 5 to 7 days when the top 2 inches of soil is dry. • Height - Max 3'-0"

Lacy tree philodendron : • It is easy to take care of, because if you watch the signals, the plant will tell you exactly what it needs. They are comfortable both as indoor and outdoor plants. • Botanical name: Philodendron scandens • Light and temperature: bright indirect sunlight; 23 31 degrees C. • Soil: a soil of pH 6.0 6.5 is ideal for philodendron • Water: while watering philodendron plants, allow the top inch of the soil to dry out between watering • Height - Max 3'-0"

Syngonium: • It is a elegant and versatile plant that is super easy to care for. They easily grow and spread over a wide length of the wall. • Botanical name: Syngonium podophyllum • Light and temperature: money plant prefers indirect light and will tolerate low light; thrives better in humid areas such as bathroom walls and various indoor spaces. • Soil: grows best in fertile loamy soil of pH range 6.0 7.5; • Water: watering every 5 to 7 days when the top 2 inches of soil is dry. •Height - Max upto 4'-0"

ELECTRICAL WORKS : WIRING IN STEEL & PVC CONDUIT Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 1 or 2 Module (75 mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 3 Module (100 mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 4 Module (125 mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 6 Module (200 mmX75 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 8 Module (125 mmX125 mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 12 Module (200 mmX150 mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.12 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6 mm thick steel conduit, aluminium cast back plate and brass holder complete, including wiring the down rod with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 run of cable

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

DISTRIBUTION BOARD, RACEWAY & CABLE TRAYS Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 kA,TPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 kA,TPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 600 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 600 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.600 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and fixing Ladder type prefabricated hot dip galvanised G.I. cable tray complete with bend/tee joints, coupling plate and nuts, bolts, washers etc. with central rungs of size 15mmx30mmx2.0mm thick at 250mm c/c and including the cost of providing loop earthing with 2 nos. 25 mm x 6 mm GI earth strips complete as per specifications, as required, and as below. 300 mm (50mmx2.0mm thick )

Supplying and fixing Ladder type prefabricated hot dip galvanised G.I. cable tray complete with bend/tee joints, coupling plate and nuts, bolts, washers etc. with central rungs of size 15mmx30mmx2.0mm thick at 250mm c/c and including the cost of providing loop earthing with 2 nos. 25 mm x 6 mm GI earth strips complete as per specifications, as required, and as below.450 mm (50mmx2.0mm thick )

GI Raceway & Junction boxes Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with internal partition/compartmentized of the following sizes including providing removable 3 mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per specification and site requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick) 200 mm wide x 40 mm deep raceway

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with internal partition/compartmentized of the following sizes including providing removable 3 mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per specification and site requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick) 150 mm wide x 40 mm deep raceway

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with internal partition/compartmentized of the following sizes including providing removable 3 mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per specification and site requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick) 100 mm wide x 40 mm deep raceway

Providing and fixing 250 x 250 x 40 mm deep 2 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 200 x 200 x 40 mm deep 1.6 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 40 mm deep 1.6 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification.

Supply and installation of following RCC (NP-2 class) Hume pipe under paved areas, including providing 75 mm thick cement concrete all around pipe 1:3:6 (1 cement, 3 coarse sand and 6 crushed stone aggregate). 150 mm dia ID

Supply and installation of following RCC (NP-2 class) Hume pipe under paved areas, including providing 75 mm thick cement concrete all around pipe 1:3:6 (1 cement, 3 coarse sand and 6 crushed stone aggregate). 300 mm dia ID

Providing and fixing of the following size medium class GI pipe sleeves.150 mm. dia.

Providing and fixing of the following size medium class GI pipe sleeves.250 mm. dia.

Supply and making of the following sizes of Brick masonary Manholes & Cable trench from class-A brick complete with 40mm thick PCC (1:4:8) base, plastering with 8 mm thick (1:6) cement mortar with cement coat of inside of the trench, including providing of prefabricated 75 mm thick RCC cover with corner of the cover protected with ISA 35, complete with excavation & removal of surplus soil.600mm (W) x 1000mm (D) trench

Supply and making of the following sizes of Brick masonary Manholes & Cable trench from class-A brick complete with 40mm thick PCC (1:4:8) base, plastering with 8 mm thick (1:6) cement mortar with cement coat of inside of the trench, including providing of prefabricated 75 mm thick RCC cover with corner of the cover protected with ISA 35, complete with excavation & removal of surplus soil. 900mm (W) x 900mm (D) trench

Supply and making of the following sizes of Brick masonary Manholes & Cable trench from class-A brick complete with 40mm thick PCC (1:4:8) base, plastering with 8 mm thick (1:6) cement mortar with cement coat of inside of the trench, including providing of prefabricated 75 mm thick RCC cover with corner of the cover protected with ISA 35, complete with excavation & removal of surplus soil. 750mm x 750mm x 1000mm deep Manhole

Supply and making of the following sizes of Brick masonary Manholes & Cable trench from class-A brick complete with 40mm thick PCC (1:4:8) base, plastering with 8 mm thick (1:6) cement mortar with cement coat of inside of the trench, including providing of prefabricated 75 mm thick RCC cover with corner of the cover protected with ISA 35, complete with excavation & removal of surplus soil.450mm x 450mm x 600mm deep Manhole

EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run).

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and laying of 100mm dia GI 'B" Class earthing pipe with 2 Nos. 32 x 6 mm GI tape form earth electrode to inspection chamber, 50mm dia medium class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 450 x 450 mm with concrete base CI manhole cover having locking arrangement with frame painted with bitumastic paint and packing with mixtures of charcoal and common salt around plate electrode including digging of pit upto permanent moisture level but not less than 3 meter and black filling as required and as per IS 3043-1987.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required

Supplying, installation, testing & commissioning of fault isolator complete with base as required

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

PUBLIC ADDRESS SYSTEM Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required

Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm).

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

CABLING AND CONDUITING FOR TELEPHONE, DATA & TV SYSTEM Supply and fixing of the following sheet steel clad wall/recess/floor mounting telephone tag block of Krone make constructed from 14 SWG sheet steel, finished with red oxide coating of two coats of paint, with hinged gasketted door and complete with adequately rated and sized telephone terminal block to receive incoming and outgoing wires. The cost shall be complete with fixing arrangements, foundations etc as required 100 pair Tag block

Supply and fixing of the following sheet steel clad wall/recess/floor mounting telephone tag block of Krone make constructed from 14 SWG sheet steel, finished with red oxide coating of two coats of paint, with hinged gasketted door and complete with adequately rated and sized telephone terminal block to receive incoming and outgoing wires. The cost shall be complete with fixing arrangements, foundations etc as required 20 pair Tag block

Supply, fixing, testing & commisssioning of Modular RJ-11 telephone outlets with grid & cover plate in suitable size of 16 SWG GI box. Single outlet face plate with RJ-11 jack

Supply, installation, testing and commissioning of 8 SWG GI conductor fish wire.

Supply and fixing of 1.6 mm thick MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware. 20 mm dia

CABLING AND CONDUITING FOR DATA SYSTEM Supply and installation of flush mounted Enhanced Category 6 T 568 A or B) outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring. Single outlet faceplate with RJ-45 jack with information outlet

Supply and fixing of 1.6 mm thick MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware. 20 mm dia

CABLING AND CONDUITING FOR TV SYSTEM Supply and fixing following signal outlets with grid plate in 1.6 mm thick GI box complete including cutting, chases, fixing of GI boxes and making good. (Cover plate shall match the colour, size and make of wiring accessories to be used in the project).TV Signals outlet

Supply, erection, testing and commissioning of spliter with boxes. Four way (S 4)

Supply and fixing of 1.6 mm thick MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware. 20 mm dia

Supply and fixing of 1.6 mm thick MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware. 25 mm dia

SWITCH SOCKETWiring for 20 Amp power outlet with 4.0 Sqmm 660/1100V FRLS PVC insulated multistranded copper conductor wires in recessed/ surface PVC conduit including cost of cutting and filling chases supply and fixing of 3 pin 20Amps shuttered modular switch socket, switch plate with internal wiring in 1.2mm thick box, earthing of 3rd pin with PVC insulated, green colour 2.5 Sqmm copper wire, complete with all accessories as required.

Wiring for 25 Amp power outlet with 6.0 Sqmm 660/1100V FRLS PVC insulated multistranded copper conductor wires in recessed/ surface PVC conduit including cost of cutting and filling chases supply and fixing of 3 pin 25Amps shuttered modular switch socket, switch plate with internal wiring in 1.2mm thick box, earthing of 3rd pin with PVC insulated, green colour 2.5 Sqmm copper wire, complete with all accessories as required.

Wiring for the MCB controlled Primary light points with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 2 mm thick MS conduit but controlled by existing MCB provided in D.B. including earthing of fixtures with 2.5 sq.mm insulated copper wire

Supply, installation, testing and commissioning of following junction boxes for connecting of dimmer’s circuits including providing terminals for looping of circuits as per site requirement, junction box, fabricated out of 16 SWG CRCA sheet steel enclosure of suitable size and painted with approved paint shade (size of junction box shall be matched with dimmer panel). Junction box suitable for upto 24 circuits

Wiring for 250 volts single phase and neutral 32 amps polycarbonate splash proof (IP-66) 3 pin industrial plug and socket outlet with 32 amps DP interlocked rotary switch in polycarbonate enclosure of approved size and design with 6 sq. mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 1.6 mm thick MS conduit, including providing and fixing of 3 pin industrial plug and socket and earthing of third pin of the socket outlet with 6 sq. mm PVC insulated copper conductor stranded flexible FRLS wire.

Wiring for 250 volts single phase and neutral 16 amps single phase kitchen equipment having free cable at equipment end including providing 16 amps 2 pole MCB isolator in IP 66 enclosure at switch location as indicated in the drawing in polycarbonate enclosure of approved size and design with 3 x 4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 1.6 mm thick MS conduit including earthing of the equipment with 4 Sq. mm PVC insulated copper conductor stranded flexible FRLS wire (Outlet)

RECEIVING OF FIXTURES Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. All type of surface,recessed, wall mounted or cove mounted 1x10W15W/20W LED luminiare.

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. All type of surface,recessed, wall mounted or cove mounted 1x10W LED luminiare.

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing.All type of recess mounted 4x14 / 2x36 W grid mounted LED luminiare .

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing.All type of Recessed LED Down Lighter

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. All type of Chandalire, Pendant, & henging light fitting

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. Cupboard Light in furniture Complete with door switch.(Guest Rooms)

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. All type of Cove Lighting LED Strip Fitting

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. All type of bulkhead light complete as required.

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing.All types of Call bell

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. Ex. Fan complete with Cutting of Wall , grouting of fans & making good of the same with plaster as per satisfaction of Project Manager. 300 mm dia. Fan

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing.Ex. Fan complete with Cutting of Wall , grouting of fans & making good of the same with plaster as per satisfaction of Project Manager. 450 mm dia. Fan

Receiving, storing, assembling, fixing, testing(before and after installation) and commissioning of following fans & Light fittings with high frequency, electronic with THD<10 % starter, control gears, lamps holder, power factor 0.99 for LED lamp & 0.95 for LED for improvement, etc. as called for, including chasing of walls, grouting of fitting and making good of the same as required, complete with providing of all necessary hardares like raw plugs, hangers, support plates etc. and flexible wires as required for fixing. Brick Light Fitting complete with Cutting of Wall , grouting of Box & making good of the same with plaster as per satisfaction of Project manger

FLOOR PANEL ( Ground Floor ) INCOMER 1 No. 160A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos160/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 200 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 7 Nos. 63A TPN MCB (10 KA) 9 Nos. 40A TPN MCB (10 KA) 4 Nos. 32A TPN MCB (10 KA) Supply of FLOOR PANEL ( Ground Floor ) as described above

FLOOR PANEL ( Ground Floor ) INCOMER 1 No. 160A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos160/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 200 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 7 Nos. 63A TPN MCB (10 KA) 9 Nos. 40A TPN MCB (10 KA) 4 Nos. 32A TPN MCB (10 KA) Receiving, fixing, testing & commissioning of FLOOR PANEL ( Ground Floor ) as described above

FLOOR PANEL ( First Floor ) INCOMER 1 No.125A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 125/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse.BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 160 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 6 Nos. 63A DP RCBO (30 mA) 3 Nos. 40A DP RCBO (30 mA) 6Nos. 32A DP MCB (10 KA) Supply of FLOOR PANEL ( First Floor ) as described above

FLOOR PANEL ( First Floor ) INCOMER 1 No.125A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 125/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse.BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 160 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 6 Nos. 63A DP RCBO (30 mA) 3 Nos. 40A DP RCBO (30 mA) 6Nos. 32A DP MCB (10 KA) Receiving, fixing, testing & commissioning of FLOOR PANEL ( First Floor ) as described above

FLOOR PANEL ( Second Floor ) INCOMER 1 No.100A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 100/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 125 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 13 Nos. 40A DP RCBO (30 mA) Supply of FLOOR PANEL ( Second Floor ) as described above

FLOOR PANEL ( Second Floor ) INCOMER 1 No.100A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 100/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 125 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 13 Nos. 40A DP RCBO (30 mA) Receiving, fixing, testing & commissioning of FLOOR PANEL ( Second Floor ) as described above

FLOOR PANEL ( Third Floor ) INCOMER 1 No. 160A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos160/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 200 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 3 Nos. 63A TPN MCB (10 KA) 3 Nos. 40A TPN MCB (10 KA) 2 Nos. 32A DP RCBO (30 mA) 10Nos. 32A DP MCB (10 KA) Supply of FLOOR PANEL ( Third Floor ) as described above

FLOOR PANEL ( Third Floor ) INCOMER 1 No. 160A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos160/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 200 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 3 Nos. 63A TPN MCB (10 KA) 3 Nos. 40A TPN MCB (10 KA) 2 Nos. 32A DP RCBO (30 mA) 10Nos. 32A DP MCB (10 KA) Receiving, fixing, testing & commissioning of FLOOR PANEL (Third Floor) as described above

FLOOR PANEL ( Third Floor Adjacent Building ) INCOMER 1 No.100A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 100/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 125 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 3 Nos. 63A TPN MCB (10 KA) 4 Nos. 40A TPN MCB (10 KA) 3 Nos. 40A DP RCBO (30 mA) Supply of FLOOR PANEL (Third Floor Adjacent Building) as described above

FLOOR PANEL ( Third Floor Adjacent Building ) INCOMER 1 No.100A 4P MCCB (25 KA) as per PRTM as mentioned in Preamble. METERING & INDICATION 1No.Multifuncion meter with 485 port & 3 nos 100/5A CT's 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. Class / Type – II, three phase AC Power line Surge Protection Device / Transient Voltage Surge Suppressor as per specification, with inbuilt fuse. BUS-BAR 1 Set Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 125 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity. OUTGOINGS 3 Nos. 63A TPN MCB (10 KA) 4 Nos. 40A TPN MCB (10 KA) 3 Nos. 40A DP RCBO (30 mA) Receiving, fixing, testing & commissioning of FLOOR PANEL (Third Floor Adjacent Building ) as described above

CCTV SYSTEM Supply, Installation, Testing & Commissioning of 1 /3" 4 MP Progressive Scan CMOS sensor;Built-in ICR Filter module & Smart 15m IR ;3.6mm;Angle of view:(H) 90(V) 46 ;Minimum illumination: Color 0.05Lux, IR ON 0 Lux;Digital zoom : 10x;IP66 weatherproof housing ;2D and 3D DNR;WDR, HLC,BLC;ROI : 8;Smart defog;Time stamp and Customized text overlays;privacy mask zones : 4;Configurable image size, quality, frame rate, VBR/CBR;H.265 Support,Resolution(2592x1520/2560x1440/2304x1296/1920x1080);30FPSSupport;PPPoE,UPnP,RTP/RTSP/RTCP,Multicast,ONVIF compliant;Administrator and user group protection,HTTP and RTSP authentication,HTTPS encryption for web access hardware watchdog,Remote client access control;Remote Management and Mobile Support;Motion detection,Alerts to SMTP client,Event notification and uploading of snapshots via e-mail,Multiple event notifications on mails;Built-in Microphone,1ch Audio in & 1ch Audio out,1ch Alarm in & 1ch Alarm out,BNC Output,Micro SD/ SDHC/ SDXC Slot:max 128GBPower Consumption : 5W (IR LED OFF); 7W (IR LED ON) ;Operating Temp : -30°C ~ 60°C ;CE UL, & FCC; (Make- as per make list or equivalent.)

Supply, Installation, Testing & Commissioning of 16CH Professional Network Video Recorder;DC-in jack,One HDMI , Two 2.0 USB Host,2 Bays (Min 8 TB)Audio input & output ;Throughput - Minimum 160Mbps,One VGA ,IEEE 802.3/u/z;SATA II, III;Two RJ45 10/100/1000M;Min. 4 channel playback;4MP Resolution Support;Control and manage up to 64 channels with CMS;Power fail recovery recording;Auto recycling when disk storage is full;DDNS client support;Events - Motion Detection, Video loss, Disk space full;Multiple Language GUI;Alert - Email. (Make- as per make list or equivalent.)

Supply, Installation, Testing & Commissioning of 4 TB Surveillance Hard disk. Approved Makes:-(Make- as per make list or equivalent.)

Supply, Installation, Testing & Commissioning of 32'' Flat Screen HD led (24X7) with Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc complete as reqd. Approved Make:- (Make- as per make list or equivalent.)

Client work statuion, Processor Core i7-7700 3.6 8M 4C ,8GB DDR4-2400 nECC (1x8GB) RAM, 1TB, Intel HD Graphics 630, Windows 10 Pro 64-bit INDIA, DVDRW with 20" Monitor, Keyboard, Mouse

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 300 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 95 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 70 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3.5 C x 50 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 35 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 25 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 16 sq. mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3 C x 16 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 10 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3 C x 10 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 6 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3 C x 6 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 25 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 16 sq. mm.

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 10 sq. mm.

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 6 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3 C x 10 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 2 C x 6 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 3 C x 6 sq.mm

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing, trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. 4 C x 2.5 sq.mm control cable

Cable Laying : Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25 sq. mm but not exceeding 120 sq. mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as requirement.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with providing of Anchor fastners and all necessary hardwares as required for fixing, including cutting, bending, welding, drilling, bolting etc. as per design as required and painted with one coat of primer and two coats of enamel paint of approved shade.

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3.5 C x 300 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3.5 C x 120 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3.5 C x 95 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3.5 C x 70 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3.5 C x 50 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 4 C x 35 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 4 C x 25 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 4 C x 16 sq. mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 4 C x 16 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3 C x 16 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium3 C x 10 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Aluminium 3 C x 6 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 4 C x 25 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 4 C x 16 sq. mm.

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 4C x 10 sq. mm.

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 4 C x 6 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 3 C x 10 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 2 C x 6 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 3 C x 6 sq.mm

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 4 C x 2.5 sq.mm control cable

Cable end termination of the following XLPE insulated PVC sheathed aluminium/copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.Copper 12 C x 2.5 sq.mm control cable

Power Cable (3 core) - 2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. 16 A TPN

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Erection of RCC/ PCC pole strut in brick ballast and ramming the foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

HVAC: Supply of Variable Refrigerant Volume (VRV) type airconditioning units complete with indoor and outdoor unit, should be aircooled 100% scroll compressor invertor technology base microprocessor controlled, with eco-friendly refrigerant R410A. Each system shall be capable of performing both cooling as well as heating function suitable for operation on 415+/- 10%- volts, 50 Hz. 3 Ph AC supply and shall be comprise of invertor scroll compressor and aircooled condenser, fan with motor and complete in all respect, of following capacities : 12 HP (Side Discharge)

Supply of Variable Refrigerant Volume (VRV) type airconditioning units complete with indoor and outdoor unit, should be aircooled 100% scroll compressor invertor technology base microprocessor controlled, with eco-friendly refrigerant R410A. Each system shall be capable of performing both cooling as well as heating function suitable for operation on 415+/- 10%- volts, 50 Hz. 3 Ph AC supply and shall be comprise of invertor scroll compressor and aircooled condenser, fan with motor and complete in all respect, of following capacities : 8 HP (Side Discharge)

Supply of ceiling mounted 4 way Cassette Type Indoor Unit with Round Flow design for 360 degree airflow, sophisticated decoration panel treated with dirt repellant coating and with motorised louvres, 3 step airflow control, Dx type, electronic control valve, dual suction fan, statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and acti-bacterial treatment , drain pump, PID Control, corded remote control, of following capacities : 3.2 TR

Supply of ceiling mounted 4 way Cassette Type Indoor Unit with Round Flow design for 360 degree airflow, sophisticated decoration panel treated with dirt repellant coating and with motorised louvres, 3 step airflow control, Dx type, electronic control valve, dual suction fan, statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and acti-bacterial treatment , drain pump, PID Control, corded remote control, of following capacities : 2.0 TR

Supply of High Wall type Indoor Unit, sophisticated decoration panel treated with dirt repellant coating and with motorised louvre, Dx type, electronic control valve,statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and acti-bacterial treatment , corded remote control, of following capacities :1.6 TR

Supply of Remote controllers suitable for above indoor units to operate, monitor, ON/OFF, temperature setting, 3 step air flow changing etc. The remote controller shall be corded type suitable for wall mounting with bracket

Supply of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control, of following capacities : 4.0 TR

Supply of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control, of following capacities : 3.0 TR

Supply of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control, of following capacities : 2.0 TR

Supply of High Wall type Split Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control, of following capacities : 1.8 TR

Supply of High Wall type Split Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control, of following capacities : 1.5 TR

Supply of High Wall type Split Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control, of following capacities : 1.0 TR

SECTION 2 : Installation, Commissioning & Ancillary Work For Airconditioning Units :- Installation & Commissioning of Variable Refrigerant Volume (VRV) type airconditioning units complete with indoor and outdoor unit, should be aircooled 100% scroll compressor invertor technology base microprocessor controlled, with eco-friendly refrigerant R410A. Each system shall be capable of performing both cooling as well as heating function suitable for operation on 415+/- 10%- volts, 50 Hz. 3 Ph AC supply and shall be comprise of invertor scroll compressor and aircooled condenser, fan with motor and complete in all respect. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc of following capacities : 12 HP (Side Discharge)

SECTION 2 : Installation, Commissioning & Ancillary Work For Airconditioning Units :- Installation & Commissioning of Variable Refrigerant Volume (VRV) type airconditioning units complete with indoor and outdoor unit, should be aircooled 100% scroll compressor invertor technology base microprocessor controlled, with eco-friendly refrigerant R410A. Each system shall be capable of performing both cooling as well as heating function suitable for operation on 415+/- 10%- volts, 50 Hz. 3 Ph AC supply and shall be comprise of invertor scroll compressor and aircooled condenser, fan with motor and complete in all respect. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc of following capacities : 8 HP (Side Discharge)

SECTION 2 : Installation, Commissioning & Ancillary Work For Airconditioning Units :- Installation & Commissioning of Variable Refrigerant Volume (VRV) type airconditioning units complete with indoor and outdoor unit, should be aircooled 100% scroll compressor invertor technology base microprocessor controlled, with eco-friendly refrigerant R410A. Each system shall be capable of performing both cooling as well as heating function suitable for operation on 415+/- 10%- volts, 50 Hz. 3 Ph AC supply and shall be comprise of invertor scroll compressor and aircooled condenser, fan with motor and complete in all respect. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc of following capacities : Indoor Units (VRV) Installation & Commissioning of 4 way ceiling mounted Cassette Type Indoor Unit with Round Flow design for 360 degree airflow, sophisticated decoration panel treated with dirt repellant coating and with motorised louvres, 3 step airflow control, Dx type, electronic control valve, dual suction fan, statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and acti-bacterial treatment , drain pump, PID Control, corded remote control, supports/ fixtures etc, of following capacities :3.2 TR

Installation & Commissioning of 4 way ceiling mounted Cassette Type Indoor Unit with Round Flow design for 360 degree airflow, sophisticated decoration panel treated with dirt repellant coating and with motorised louvres, 3 step airflow control, Dx type, electronic control valve, dual suction fan, statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and acti-bacterial treatment , drain pump, PID Control, corded remote control, supports/ fixtures etc, of following capacities : 2.0 TR

Installation & Commissioning of High Wall type Indoor Unit, sophisticated decoration panel treated with dirt repellant coating and with motorised louvre, Dx type, electronic control valve,statically and dynamically balanced , cooling coils of seamless copper tubes, cleanable type filters with anti-mould and anti-bacterial treatment , corded remote control, supports/ fixtures etc, of following capacities : 1.6 TR

Installation & Commissioning of Remote controllers suitable for above indoor units to operate, monitor, ON/OFF, temperature setting, 3 step air flow changing etc. The remote controller shall be corded type suitable for wall mounting with bracket

Installation and commissioning of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities : 4.0 TR

Installation and commissioning of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities :3.0 TR

Installation and commissioning of 4 way Cassette type Split Airconditioning Units (Non VRV), Invertor type with Heating & Cooling function, Ecofriendly refrigerant R32/R410A, Dx type, Cooling coils od seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities : 2.0 TR

Installation & Commissioning of High Wall type Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities : 1.8 TR

Installation & Commissioning of High Wall type Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities : 1.5 TR

Installation & Commissioning of High Wall type Airconditioning Units (Non-VRV), Invertor type with Heating and Cooling function, Ecofriendly refrigerant R32/ R 410A, Dx type, cooling coils of seamless copper tubes, with cordless remote control. Lifting/ shifting, MS base framework with one coat of primer and two coats of black enamel paint, Vibration Isolation pads, refrigerant gas charge, supports/ fixtures, etc, of following capacities : 1.0 TR

Supply, installation & commissioning of Interconnecting copper refrigerant pipe for VRV Airconditioning Units of size 16 Gauge upto 19.1 mm O.D and below this 20 Gauge work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping shall be properly supported as per the specifications and requirement. 28.6 mm O.D.(insulation : 19 mm)

Supply, installation & commissioning of Interconnecting copper refrigerant pipe for VRV Airconditioning Units of size 16 Gauge upto 19.1 mm O.D and below this 20 Gauge work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping shall be properly supported as per the specifications and requirement. 19.1 mm O.D.(insulation : 13 mm)

Supply, installation & commissioning of Interconnecting copper refrigerant pipe for VRV Airconditioning Units of size 16 Gauge upto 19.1 mm O.D and below this 20 Gauge work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping shall be properly supported as per the specifications and requirement. 15.9 mm O.D.(insulation : 13 mm)

Supply, installation & commissioning of Interconnecting copper refrigerant pipe for VRV Airconditioning Units of size 16 Gauge upto 19.1 mm O.D and below this 20 Gauge work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping shall be properly supported as per the specifications and requirement. 12.7 mm O.D.(insulation : 13 mm)

Supply, installation & commissioning of Interconnecting copper refrigerant pipe for VRV Airconditioning Units of size 16 Gauge upto 19.1 mm O.D and below this 20 Gauge work with (19 mm / 13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping shall be properly supported as per the specifications and requirement. 9.5 mm O.D.(insulation : 13 mm)

Supply, installation & commissioning of control cum transmission wiring for VRV Airconditioning Units of copper in suitable size of shielded 2Cx1.5sqmm/ 2.0sqmm as per manufacturer's specification in PVC conduit for looping of Indoor & Outdoor Units :

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV 4 way Cassette Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : 4.0 TR

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV 4 way Cassette Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : 3.0 TR

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV 4 way Cassette Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : 2.0 TR

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV High Wall Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : For 1.8TR

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV High Wall Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : For 1.5TR

Supply, installation & commissioning of interconnecting copper refrigerant pipes for Non -VRV High Wall Airconditioning Units as per manufacturer's specifications, in pair length, with closed cell nitrile tubular insulation of both refrigerant lines in a circuit, interconnecting electrical wiring in PVC conduit, all piping shall be properly supported as per requirement, suitable for following capacities : For 1.0TR

Supply, installation and comissioning of UPVC piping complete with fittings, supports as per specifications and duly insulated with 13 mm thick nitrile rubber insulation as per specification and drawings. 40 mm dia

Supply, installation and comissioning of UPVC piping complete with fittings, supports as per specifications and duly insulated with 13 mm thick nitrile rubber insulation as per specification and drawings. 32 mm dia

Supply, installation and comissioning of UPVC piping complete with fittings, supports as per specifications and duly insulated with 13 mm thick nitrile rubber insulation as per specification and drawings. 25 mm dia

Mechanical Ventilation System : Supply, installation and commissioning of factory fabricated Single Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-plasticized / pre-coated Galvanised steel sheet with DIDW blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. The fan Motor shall be of efficiency class IE2. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 1200 CFM,Total static pressure of 20 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 1050 CFM,Total static pressure of 20 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 900 CFM,Total static pressure of 20 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 750 CFM,Total static pressure of 20 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 600 CFM,Total static pressure of 20 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. Extruded Aluminium powder coated Exhaust Air Louvre with Birdscreen. 450 CFM,Total static pressure of 20 mm WG

Supply, installation and commissioning of factory fabricated Single Skinned circular inline fans section made out of extruded aluminium section with 1.0mm pre-plasticized / pre-coated Galvanised steel sheet with DIDW blower, blower section and blower motor TEFC type suitable for operation on 220 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. The fan Motor shall be of efficiency class IE2. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. 600 CFM,Total static pressure of 10 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. 450 CFM,Total static pressure of 10 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. 300 CFM,Total static pressure of 10 mm WG

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. 150 CFM,Total static pressure of 10 mm WG

Supply, fabrication, erection and commissioning of site fabricated rectangular ducts using G.I Sheets.The price shall include flanges, turning vanes, supports (full threaded rod & G.I slotted channel), sealent (neoprene gasket), hangers, access door etc. 24 gauge galvanized sheet steel (0.63mm)

Supply, installation and balancing of square/ rectangular extruded aluminium powder coated grilles with 4 side flange for exhaust air 150mmx150mm (neck size)

Supply, installation testing and commissioning of duct acoustic insulation. Material shall be open cell nitrile rubber 10 mm thick based with 140-180 Kg/m3 density, Fire Grade Class O and all accessories as per specification. Note-Minor civil works of making opening and finishing them as required :Chasing and making up of Walls/ surfaces for running of refrigerant piping, drain piping and interconnecting electrical wiring as per requirementProviding and making up of Wall openings with sleeves for running of refrigerant piping, drain piping and interconnecting electrical wiring as per requirement

Fire Fighting System :-Providing, laying, jointing, testing & commissioning of Mild Steel class `C' (Heavy Class) pipes conforming to IS-1239 part-1 with all accessories like all fittings including tees, elbows, reducers, union, flanges, screwed adopter, rubber gaskets. All hangers, clamps, brackets etc or as required / directed at site including cutting chases & filling the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Welding of any kind on the galvanized support / hanger shall not be permitted. G.I nuts, bolts, washer including taking connection from existing pipes, fixing the pipe on floor / wall / ceiling with clamps, hangers using anchor fastners as per technical specification. cutting holes by core cutting machine and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. The rate shall include painting of the pipeline with one coat of primer and two or more coats of synthetic enamel paint of approved shade. (Vertical Pipes)25 mm dia

Providing, laying, jointing, testing & commissioning of Mild Steel class `C' (Heavy Class) pipes conforming to IS-1239 part-1 with all accessories like all fittings including tees, elbows, reducers, union, flanges, screwed adopter, rubber gaskets. All hangers, clamps, brackets etc or as required / directed at site including cutting chases & filling the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Welding of any kind on the galvanized support / hanger shall not be permitted. G.I nuts, bolts, washer including taking connection from existing pipes, fixing the pipe on floor / wall / ceiling with clamps, hangers using anchor fastners as per technical specification. cutting holes by core cutting machine and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. The rate shall include painting of the pipeline with one coat of primer and two or more coats of synthetic enamel paint of approved shade. (Vertical Pipes)80 mm dia

Providing, laying, jointing, testing & commissioning of Mild Steel class `C' (Heavy Class) pipes conforming to IS-1239 part-1 with all accessories like all fittings including tees, elbows, reducers, union, flanges, screwed adopter, rubber gaskets. All hangers, clamps, brackets etc or as required / directed at site including cutting chases & filling the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Welding of any kind on the galvanized support / hanger shall not be permitted. G.I nuts, bolts, washer including taking connection from existing pipes, fixing the pipe on floor / wall / ceiling with clamps, hangers using anchor fastners as per technical specification. cutting holes by core cutting machine and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. The rate shall include painting of the pipeline with one coat of primer and two or more coats of synthetic enamel paint of approved shade. (Vertical Pipes)100 mm dia

Providing and fixing of First aid fire hose reel wall mounting swinging type complete with drum, bracket, 25 mm dia ball valve and 20 mm dia x 36 meter long high pressure hose reel tubing as per IS 444 & ISI marked with shutoff nozzle having 5mm dia orifice. The hose reel shall strictly conform IS: 884-1985. It shall also be provided with 25 mm dia installation and isolation valve.Notes :Pipes upto and including 50 mm dia shall be threaded joints, above 50 mm shall be welded joints. II) For Pipe up to and including 50 mm dia standard threaded forged steel fitting and Pipe above 50 mm dia standard M.S fitting with welded joint shall be used. Steel Structural Supports are included in this item. M.S pipe sleeve of suitable higher size shall be provided wherever the pipe are crossing the wall /floors and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's requirement.

Providing and fixing MS fire hose cabinet of approximate size 750x600x250 mm deep fabricated from 2.0mm thick with single or double glazed front door and pad locking arrangement, painted Fire Red with Stove enamelled paint Fire Hose written on front including necessary supports complete. (For hose reel) PCC (1:2:4) pedastals / supports for Under ground / above ground pipesNotes :Pipes upto and including 50 mm dia shall be threaded joints, above 50 mm shall be welded joints. II) For Pipe up to and including 50 mm dia standard threaded forged steel fitting and Pipe above 50 mm dia standard M.S fitting with welded joint shall be used. Steel Structural Supports are included in this item. M.S pipe sleeve of suitable higher size shall be provided wherever the pipe are crossing the wall /floors and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's requirement. Notes :Pipes upto and including 50 mm dia shall be threaded joints, above 50 mm shall be welded joints. II) For Pipe up to and including 50 mm dia standard threaded forged steel fitting and Pipe above 50 mm dia standard M.S fitting with welded joint shall be used. Steel Structural Supports are included in this item. M.S pipe sleeve of suitable higher size shall be provided wherever the pipe are crossing the wall /floors and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's requirement.

Providing and fixing Cast Iron wafer type butterfly valves of C.I disc, Nitrile/EPDM rubber lining of PN-16 pressure rating complete with bolts, nuts, 3.0 mm thick compressed asbestos gasket, companion flanges as per table 'E' complete in all respects. Notes :Pipes upto and including 50 mm dia shall be threaded joints, above 50 mm shall be welded joints. II) For Pipe up to and including 50 mm dia standard threaded forged steel fitting and Pipe above 50 mm dia standard M.S fitting with welded joint shall be used. Steel Structural Supports are included in this item. M.S pipe sleeve of suitable higher size shall be provided wherever the pipe are crossing the wall /floors and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's requirement. 100 mm dia

Providing and fixing Cast Iron Swing Type with Natural Rubber Flap non return valves conforming to IS : 5312-1984 (Part-I) of PN-16 pressure rating with flanged ends to IS : 1538 including washer, nuts bolts, 1.5 mm thick copressed asbestos gasket companion flanges as per table "E" complete in all respects. Notes :Pipes upto and including 50 mm dia shall be threaded joints, above 50 mm shall be welded joints. II) For Pipe up to and including 50 mm dia standard threaded forged steel fitting and Pipe above 50 mm dia standard M.S fitting with welded joint shall be used. Steel Structural Supports are included in this item. M.S pipe sleeve of suitable higher size shall be provided wherever the pipe are crossing the wall /floors and sealing the sleeves with glass wool in between and fire sealant compound at either end all as per Project Manager's requirement. 100 mm dia

Supplying, installing, testing & commissioning of electric driven automatic fire booster pump set consisting of the following : Horizontally mounted centrifugal end suction type fire booster pump suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ ± 5% AC supply. The pumps shall be made of CI casing, bronze impeller (hard finished and dynamically balanced) and stainless steel (306) shaft with mechanical seal capable of delivering 450 ltrs/minute against a total head of 35 metres approx and connected by a flexible coupling to Squirrel cage induction motor as per IEC standard. The pump shall be complete with arrangement for testing of the working of the pumping set as required. Synchronous speed of pump is 2900 RPMas per Manufacture recommendarion with degree of protection Conforming to IP 55 and class of insulation "F". Coupling guard for motor & pump. Common bed plate for pumps and motor fabricated from mild steel or cast iron type channel. Suitable cement concrete pump foundation with cushy foot, MS bolts, washers as required. System shall includes pipes, valves, strainers, Electrical control panel and cable for pump.

Providing and fixing double flanged vertical air vessel fabricated with shell 8 mm thick & dished ends 10 mm thick M.S.plate, 450 mm dia and 2.0 m high complete with five pressure switches to operate jockey and main pumps at drop of pressure as given in the specifications.

Providing and fixing Cast Iron 'Y' type strainer of 16 kg/cm2 pressure rating with Stainless Steel (304) perforated screen (flanged) including rubber gaskets, flanges, nuts, bolts and washers etc. complete as required. 100 mm dia

Providing & fixing of heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete in all respects.100 mm dia

Providing & fixing of heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete in all respects.80 mm dia

Providing & fixing dial type pressure gauge (dial diameter 100 mm, caliberation 0-15 kg/sqcm) with ball valve and pipe at hydrant station.

Providing and fixing Fire Extinguishers (ABC & Co2 Type ) complete with all accessories as per manufacturers specifications. Capacity 5 Kg (Co2 Type)

Providing and fixing Fire Extinguishers (ABC & Co2 Type ) complete with all accessories as per manufacturers specifications.Capacity 6 Kg (ABC Type)

Providing and fixing Fire Extinguishers (ABC & Co2 Type ) complete with all accessories as per manufacturers specifications.Capacity 9 Kg(ABC Type)

Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14 kgf/cm2 and temperature rating of 225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :-1000 mm

Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14 kgf/cm2 and temperature rating of 225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :- 1500 mm

Dismantling Work :-Dismantling & rework of MS fire pipes manually / by mechanical means removing support clamp as per direction of engineer in charge.

Dismantling of sluice/Butterfly valve including stacking of useful materials as per direction of engineer in charge Up to 150 mm diameter

Dismantling of sluice/Butterfly valve including stacking of useful materials as per direction of engineer in charge Above 150 mm diameter

Dismantling of fire hydrant including stacking of useful materials within 50 metres lead.

Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14 kgf/cm2 and temperature rating of 225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :- 1000 mm

Providing, fixing, testing and commissioning of Sprinkler Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14 kgf/cm2 and temperature rating of 225oF UL/ FM Listed. The length of Flexible Sprinklers Pipe shall be :-1500 mm

Fire Supression System Supplying and Fixing of Aerosol Fire Extinguishing Generator DYNAMECO 2000 TA having a height of 250 mm and dimension of 200 mm weighing 7.530 kg for protecting a volume of 20.00 -25.00 cubic metre.And functioning temperature -40 deg C to 85 deg C i/c is fixing arrangement of drilling, clamping the aerosol , connetcted with thermal chord etc as required

Supplying and Fixing Of Optical Type Smoke Detector with imported base.

Supplying and Fixing of Triggering Circuits

Supplying and Fixing of 2 Zone Fire Control / Gas Release Panel complete as reqd

Supplying and Fixing of Electronic Hooters complete as reqd.

Supply and drawing of copper Armoured 3 C X 1.5 Sq mm cable, Complete with termination and testing as per requirement.

Supply and drawing of copper flexible cable/wire Complete with termination and testing as per requirement.

INTERNAL & EXTERNAL COLD WATER SUPPLY :-Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15mm dia nominal bore

20mm dia nominal bore

25mm dia nominal bore

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.40mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.50mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 65mm dia nominal bore Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 32 mm diameter pipe

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 40 mm diameter pipe

Providing and fixing polyshield outer mechanical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) for terrace & external water pipes as per manufacturers specification. 65 mm dia (19 mm thickness of insulation)

Providing and fixing polyshield outer mechanical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) for terrace & external water pipes as per manufacturers specification. 50 mm dia (13 mm thickness of insulation)

Providing and fixing polyshield outer mechanical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) for terrace & external water pipes as per manufacturers specification. 40 mm dia (13 mm thickness of insulation)

Providing and fixing polyshield outer mechanical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) for terrace & external water pipes as per manufacturers specification. 32 mm dia (13 mm thickness of insulation)

Providing and fixing polyshield outer mechanical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) for terrace & external water pipes as per manufacturers specification. 25 mm dia (13 mm thickness of insulation)

Providing and fixing in position of approved quality high pressure rated Gun Metal Float Valve with copper ball float and brass rods of required length suitable for test pressure of not less than 15 Kg/sqcm of the following sizes: 32 mm dia

Providing and fixing in position of approved quality high pressure rated Gun Metal Float Valve with copper ball float and brass rods of required length suitable for test pressure of not less than 15 Kg/sqcm of the following sizes: 40 mm dia

Providing and fixing 3.0 HP Vertical Hydropneumatic System-Varibale Speed VFD No of Pump 1working & One Stand By Equipped Cantrol Panel For operation in Fixed Speed (Make-KSB Movitech10B or eq. as per makelist)

Pressure Tank 100L

INTERNAL HOT WATER SUPPLY: Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia nominal bore

Providing and Fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia nominal bore

Providing and fixing nitrle rubber insulation on hot water supply / return pipes. 20 mm dia (9 mm thickness of Insulation)

Providing and fixing nitrle rubber insulation on hot water supply / return pipes. 15 mm dia (9 mm thickness of Insulation)

INTERNAL DRAINAGE Soil, Waste and Rain Water Pipe Providing and fixing soil, waste and vent pipes : 100 mm dia, Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing plain bend of required degree.100 mm dia Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree 100x100x100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors Sand cast iron S&S as per IS: 3989

Providing, fixing, jointing, testing and commissioning of UV stabilised UPVC pipes, Type B as per IS:13592 for soil, waste and vent, including all fittings with or without access i.e bends, junctions, cowls, offsets, couplers, connectors, heavy duty Metal pipe clamps with rubber seal/clips//holders etc. and jointing with heavy duty solvent cement, complete as per manufacturer's specifications including cutting holes in walls and floors, wherever required and making good the same, complete as directed by the Engineer-in-Charge. (vertical pipes can be jointed through rubber O rings) 110 mm dia

Providing, fixing, jointing, testing and commissioning of uPVC pipe as per IS 4985, Class-3, 6Kg/cm2 with cement solvent joint, complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals and sinks & balcony drainage, as directed by the Engineer-in-charge. 63mm dia

Providing, fixing, jointing, testing and commissioning of uPVC pipe as per IS 4985, Class-3, 6Kg/cm2 with cement solvent joint, complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals and sinks & balcony drainage, as directed by the Engineer-in-charge. 40mm dia

Providing & fixing in position uPVC full bore P / S trap with 50 mm water seal of following sizes for embedded area, making proper connection with M seal ,including cutting chase / hole in floors /slabs and bringing the same in proper condition and shape after placing the trap in right position complete as required. 100 mm inlet and 100 mm outlet.

Providing, fixing, testing and commissioning of uPVC pipe inlet fittings with maximum 3 inlets 40, 50 & 63mm OD size fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/rubber ring joint complete .

Providing and fixing uPVC floor drain consisting of PVC reducing elbow 110 x 63mm (Grating and pvc pipe to be paid separately), complete as directed by the Project Manager.

Providing and fixing heavy duty S.S. Floor grating with frame of approved design including setting in floor with cement motor to match with floor finish as per architect requirement. Size 150 mm x 150 mm or 125 mm dia

Providing and fixing heavy duty S.S. Floor grating with frame of approved design including setting in floor with cement motor to match with floor finish as per architect requirement. Size 100 mm x 100 mm or 100 mm dia

Providing and fixing PVC COP /FCO with suitable insert keys for opening as per approved sample, properly jointed to soil and waste pipe as per requirement, complete as per instructions of the Engineer in charge. For 110 mm dia pipe Providing and fixing PVC COP /FCO with suitable insert keys for opening as per approved sample, properly jointed to soil and waste pipe as per requirement, complete as per instructions of the Engineer in charge.

Providing and fixing in position G.I. pipe and fittings of class `C' (heavy class) conforming to IS:1239 for waste pipe from individual fixtures to floor trap / floor drain & vent pipe Including fixing at wall / ceiling level supported by galvanized clamps and hangers providing two coats of synthetic enamel paint of approved shade as per pipe colour code over a coat of primer or cutting & chasing in wall & floors, providing protection to embedded GI pipes & fittings by wrapping of polythene sheet (400 microns) over two coats of bitumen including proper overlaps in joints complete as required and making good the chase by using 1:1 cement mortar. (For Main Kitchen Drainage ) 50 mm dia

Providing and fixing in position G.I. pipe and fittings of class `C' (heavy class) conforming to IS:1239 for waste pipe from individual fixtures to floor trap / floor drain & vent pipe Including fixing at wall / ceiling level supported by galvanized clamps and hangers providing two coats of synthetic enamel paint of approved shade as per pipe colour code over a coat of primer or cutting & chasing in wall & floors, providing protection to embedded GI pipes & fittings by wrapping of polythene sheet (400 microns) over two coats of bitumen including proper overlaps in joints complete as required and making good the chase by using 1:1 cement mortar. (For Main Kitchen Drainage ) 40 mm dia

Providing, fixing, jointing, testing and commissioning Centrifugally Cast (Spun) Iron spigot and socket pipe for soil, waste & vent pipes installation conforming to IS:3989 cut to required lengths including all necessary fittings and specials such as Bends, junctions, offsets, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. duly epoxy coated. Making proper connection with drip seal PJS joint or pig lead joint of required depth as per manufacturer. Cutting, chases/holes in floors / walls / slab. (For Basements Ceiling ) 150 mm Dia

Providing and fixing G.I. inlet hopper with two or three inlets fittings to receive waste pipes from fixtures waste. The hopper shall be fabricated from 100 mm dia 800 mm to 1000 mm long or Suitable as per site of G.I. class 'C' (heavy class) pipe and welded G.I. sockets, fixed to C.I. trap with lead joint / drip seal and support through galvanized steel support from slab or set in cement concrete mix 1:2:4 complete as required. The hopper shall be hot dip galvanized after fabrication and fixed to CI trap / pipe with drip seal joint.

Providing and fixing G.I clean out plug, socket, elbow, extension piece caulked to pipe and cast brass plug with suitable inlet key for opening male threaded joint with GI class C pipe & socket. Including lead / drip seal caulked to C.I pipes complete as required. For 150 mm dia pipe

Providing and fixing G.I clean out plug, socket, elbow, extension piece caulked to pipe and cast brass plug with suitable inlet key for opening male threaded joint with GI class C pipe & socket. Including lead / drip seal caulked to C.I pipes complete as required. For 100 mm dia pipe

Providing and fixing floor drain consisting of GI reducing elbow, complete as directed by the Project Manager. 100mm x 50mm GI elbow (Heavy duty)

Rain Water Drainage Providing and Fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm diameter

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing of Point drain Upper section in ABS with recessed polymer cover for on-site tiling 110 mm x 110 mm, Rim in stainless steel with tile thickness 10 mm, with locking system. System 100 Manufacturer: KESSEL Article number: 27211 with Multistop as an odor, foam, rodent and insect stop System 100 Manufacturer: KESSEL Article number: 43500 or eq. as per makelist.

Providing and fixing of multistop for drain as an odor, foam, rodent and insect stop System 100 Manufacturer: KESSEL Multistop 43500 odor, foam and rodent stop, System 100 or eq. as per makelist.

SANITARY FIXTURES & FITTINGS: Providing and fixing wall hung water closet of approved shape & make including providing & fixing concealed cistern with dual flush fitting, of flushing capacity as per the approaved make, including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Make - KOHLER WC - MODEL No. 20217IN-S-O CISTERN MODEL No. - 77027IN-N-NA FACE PLATE MODEL No. - 8857IN-M-CP

Providing and fixing wall hung water closet of approved shape & make including providing & fixing concealed cistern with dual flush fitting, of flushing capacity as per the approaved make, including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Make - KOHLER WC - MODEL No. 18131IN-S-O CISTERN MODEL No. - 77027IN-N-NA FACE PLATE MODEL No. - 4177IN-N-CP

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Make - KOHLER MODEL No. 12927IN-CP

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Make - KOHLER MODEL No. 98100IN-CP

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin with a 15 mm CP Brass single hole basin mixer Make - KOHLER BASIN MODEL No. 75374IN-1-0 MIXER MODEL No. 72275IN-4ND-CP

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin with a 15 mm CP Brass single hole basin mixer. Make - KOHLER BASIN MODEL No. 75374IN-1-0 MIXER MODEL No. 16027IN-4ND-CP

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin with a 15 mm CP Brass single hole basin mixer. Make - KOHLER BASIN MODEL No. 2211IN-0 MIXER MODEL No. 198827IN-4ND-CP

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Make - KOHLER 8"ABS square Shower head Model No. - 73199IN-CP Shower Arm MODEL NO. - 16347IN-CP

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 200mm rain shower round. Make - GROHE SHOWER MODEL No. - FFASS025-006500BCO SHOWER ARM MODEL No. - FF163505050

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. Make - KOHLER MODEL No. - 16359IN-A-CP Hand Shower Bracket Model No. - 9040IN-CP

Providing and fixing white vitreous china with integrated sensor urinal shall have pre & post flushing with water, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Make - KOHLER Model No. - 16321IN-SS-O

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Providing and fixing towel ring with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colourweighing not less than 88 gms. Make - KOHLER. MODEL No. - 5631IN-CP

Providing and fixing towel rail with toowel shelf complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Make - KOHLER MODEL No. - 17529T-CP

Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Make - KOHLER. MODEL No. - 17521TCP

Providing and fixing toilet paper holder :Make - KOHLER MODEL No. - 5633IN-CP

Providing and fixing soap Dish Holder of approaved make with concealed fitting arrangements,weighing not less than 106 gms. MAKE - GROHE MODEL No. - FFAS0482-908500BF0

Providing and fixing soap Dish Holder of approaved make with concealed fitting arrangements,weighing not less than 106 gms. Make - KOHLER MODEL NO - 5634IN-CP

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length ,15 mm nominal bore

Providing and Fixing liquid soap container of approaved make, 112mm distance from wall with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less that 105gms. Make - KOHLER Model NO - 10712D-CP

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.

Providing and fixing backlit mirror with all desired fittings as per the approaved make & model. Mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Make - KOHLER Model NO - 23265IN - NA

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and Fixing C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw complete as required.

Providing and Fixing, testing and commissioning of C.P. brass wall / counter mounted sink mixer with C.P. wall flange, overhead swinging spout complete as required and making good.

Providing and Fixing fully automatic "NO TOUCH" hand drier suitable to operate on 220 volts, single phase 50 Hz, A.C power supply and directly plugged to power point complete.Make - KOHLER MODEL No. - 5486T-B-OP

Providing and Fixing of CP bath Tub supply and shower fitting comprising of single lever mixer with concealed divertor (for hand shower), CP bath spout, CP shower head with flexible tube including cutting and making good the walls where required complete. make - Kohler BATHTUB MODEL No. - K-18212T-G1-0

Providing, fixing, Testing & Commissioning of storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled MS jacket, thermostatically controlled inner heater with pilot neon lamps,complete as required. 25 Liters

Providing, fixing, Testing & Commissioning of storage type water heater of approved shade with copper container, glasswool insulation,stove enamelled MS jacket, thermostatically controlled inner heater with pilot neon lamps,complete as required. 50 Liters

Providing & fixing Shower spouts including diverter & receesed trim of approaved make with all desired fittings. Make - KOHLER Shower Spout MODEL No. - 10386IN-CP Trim MODEL No. - 99472IN - 4FP-CP Diverter MODEL No. - 882IN-CP

Providing & fixing wall mounted metal lever with adjustable floew rate limiter& automatic diverter of approaved make. Make - GROHE MODEL No. - 123198000

EXTERNAL SEWRAGE,STORM WATER DRAINAGE & IRRIGATION SYSTEM : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kind of soil Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm size P type

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :with common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 mm deep with SFRC Cover and frame (heavy duty , HD- 20 grade designation) 560 mm internal dia confirming of to I.S 12592 total weight of cover and frame not less than 182.Kg. fixied in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone agggregate 20 mm nominal size ) including centering shutering all complete.(Excavation,foot rest and 12 mm thick plaster at the external surface shall be paid for separately)Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm diameter

Providing, fixing, jointing, testing and commissioning structured wall plastic pipe confirming to IS: 16098 cut to required lengths including all necessary fittings, including excavation in all kind of soil (hard / soft), dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required. 160 OD pipe (SN-8)

Constructing Grease Trap of size as mentioned below of 1500mm liquid depth in brick work of class 75 with cement mortar (1:6), inside plastering 16 mm thick with cement mortar 1:3 with floating coat ofneat cement and rough plaster on outside. Including aluminium bucket as per detail to collect the grease. RCC top slab with 3 nos. 600 mm dia medium duty, double seal manhole covers with frame (weight of covers & weight of frame 75 Kg), necessary 150 mm thick foundation concrete (1:2:4). '2000X1200

Providing, Installing & fixing UPVC (Unplasticized polyvinyl chloride) Irrigation water supply pipes, conforming to IS : 4985 Pipe Class 'C' 10 kg/Sqcm cut to required lengths inclyding all necesssary fittings and specials such as bends, junctions, offsets etc including connection between UPVC & metal pipe/GI i.e. alsoEarth Work in Excavation of all kinds of soil required width for Irrigation water supply pipes including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil and then returning the soil as required in layer not exceeding 20 cms in depth including consolidating each deposited layers by ramming, watering etc. and disposing of surplus excavated soil as directed within project site complete in all respect as per technical specifications, drawings and instructions of Project Manager. (For Irrigation purpose)40 mm dia

Providing, Installing & fixing UPVC (Unplasticized polyvinyl chloride) Irrigation water supply pipes, conforming to IS : 4985 Pipe Class 'C' 10 kg/Sqcm cut to required lengths inclyding all necesssary fittings and specials such as bends, junctions, offsets etc including connection between UPVC & metal pipe/GI i.e. alsoEarth Work in Excavation of all kinds of soil required width for Irrigation water supply pipes including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil and then returning the soil as required in layer not exceeding 20 cms in depth including consolidating each deposited layers by ramming, watering etc. and disposing of surplus excavated soil as directed within project site complete in all respect as per technical specifications, drawings and instructions of Project Manager. (For Irrigation purpose)25 mm dia

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

L-1 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised LED Profile 20Watts with Rigid Strip 2000Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised LED Profile 20Watts with Rigid Strip 2000Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-2 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Customised Hanging light Complete with LED lamp & Power supply ,4000K .

Suspended System Kit

L-3 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: customised glass hanging light Complete with lamp,3000K

L-4 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-5 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only) (Toilet 1& 2)

L-6 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) ) (Toilet 1& 2)

L-1 GROUND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 GROUND FLOOR - CHIEF ADMINISTRATORS CABIN: Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-1 GROUND FLOOR - 8 SEATER VIP DINNING HALL Customised LED Profile 20Watts with Rigid Strip 2000Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-4 GROUND FLOOR - 8 SEATER VIP DINNING HALL Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-8 GROUND FLOOR - 8 SEATER VIP DINNING HALL Customised Workstation FLOW light 10W/ft strong aluminum profile design inbuilt driver Complete with LED lamp, BWF Diffuser,4000K.

Suspended System Kit

Non Dimmable Power Supply

L-1 GROUND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 GROUND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 GROUND FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

GROUND FLOOR - 40 seater dinning hall Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

GROUND FLOOR - 40 seater dinning hall Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-5 GROUND FLOOR - 40 seater dinning hall Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 GROUND FLOOR - 40 seater dinning hall Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-9 GROUND FLOOR - 40 seater dinning hall Customised WOODEN Hanging light Complete with LED lamp & Power supply,3000K

L-5 GROUND FLOOR - TOILET 1575X2230 Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-4 GROUND FLOOR TOILET 1575X2230 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-8 GROUND FLOOR - 65 SEATER SEMINAR HALL Customised Workstation FLOW light 10W/ft strong aluminum profile design inbuilt driver Complete with LED lamp, BWF Diffuser,4000K.

Suspended System Kit

Non Dimmable Power Supply

L-8 GROUND FLOOR - 65 SEATER SEMINAR HALL Customised Workstation FLOW light 10W/ft strong aluminum profile design inbuilt driver Complete with LED lamp, BWF Diffuser,4000K.

Suspended System Kit

Non Dimmable Power Supply

L-8 GROUND FLOOR - 65 SEATER SEMINAR HALL customoised Spot for linear Honeycom complete with LED lamp & Power supply,3000K

GROUND FLOOR - 40 seater dinning hall Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-5 GROUND FLOOR - TOILET Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-4 GROUND FLOOR TOILET Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-9 GROUND FLOOR - BUFFET TABLE Customised WOODEN Hanging light Complete with LED lamp & Power supply,3000K

L-5 GROUND FLOOR -BUFFET TABLE Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 4000K,Diffused. (For indoor use only)

L-10 GROUND FLOOR - KITCHEN Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-7 GROUND FLOOR -CONFRENCE ROOM Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-7 GROUND FLOOR -CONFRENCE ROOM : Customised SKYlight Fabric Ceiling 4000K (Frame for light to be provided by contractor)

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (LIVING/DINNING) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (LIVING/DINNING) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-4 FIRST FLOOR - (SUITE TYPE - 1) X 2 (LIVING/DINNING) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-11 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Study Table ) Concrete Hanging light with LED bulb , base concrete holder & color wire ,3000k

L-5 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-12 FIRST FLOOR - (SUITE TYPE - 1) X 2 (BED SIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

OPTION L-12 FIRST FLOOR - (SUITE TYPE - 1) X 2 (BED SIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

L-5 FIRST FLOOR - (SUITE TYPE - 1) X 2 (BEDROOM) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 4000K,Diffused. (For indoor use only)

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-5 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUITE TYPE - 2) X 6 (LIVING/DINNING) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - ((SUITE TYPE - 2) X 6 (LIVING/DINNING) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-4 FIRST FLOOR - (SUITE TYPE - 2) X 6 (LIVING/DINNING) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-12 FIRST FLOOR - (SUITE TYPE - 2) X 6 (BED SIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

L-12 FIRST FLOOR - (SUITE TYPE - 2) X 6 (BED SIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

L-5 FIRST FLOOR -(SUITE TYPE - 2) X 6 (BEDROOM) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 4000K,Diffused. (For indoor use only)

L-1 FIRST FLOOR - (SUITE TYPE - 2) X 6 BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUITE TYPE - 2) X 6 (BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-5 FIRST FLOOR -(SUITE TYPE - 2) X 6 (Toilet ) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 FIRST FLOOR - (SUITE TYPE - 2) X 6 (Toilet ) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 FIRST FLOOR - (SUITE TYPE - 2) X 6 (Toilet ) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - (SUITE TYPE - 2) X 6 (Toilet ) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUIT TYPE - 3) X 2 (Ceiling Cove) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUIT TYPE - 3) X 2 (Ceiling Cove) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUIT TYPE - 3) X 2 (Spot) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-11 FIRST FLOOR - (SUIT TYPE - 3) X 2 (Study Table ) Concrete Hanging light with LED bulb , base concrete holder & color wire ,3000k

L-5 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 FIRST FLOOR - (SUITE TYPE - 1) X 2 (Toilet ) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - (SUIT TYPE - 4) (Ceiling Cove) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUIT TYPE - 4) (Ceiling Cove) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - (SUIT TYPE - 4) (Spot) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-5 FIRST FLOOR - (SUITE TYPE - 4) (Toilet ) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,Diffused. (For indoor use only)

L-6 FIRST FLOOR - (SUITE TYPE - 4) (Toilet ) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 FIRST FLOOR - (SUITE TYPE - 4) (Toilet ) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 FIRST FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-1 FIRST FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 FIRST FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 FIRST FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-1 SECOND FLOOR - Guest bedroom (1 TO 21 ) (BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 SECOND FLOOR - Guest bedroom (1 TO 21 ) (BEDROOM) Customised LED Profile 10Watts with Rigid Strip 1100Lumens , aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-12 SECOND FLOOR - Guest bedroom (1 TO 21 ) (BEDSIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

OPTION L-12 SECOND FLOOR - Guest bedroom (1 TO 21 ) (BEDSIDE) Decorative table lamp complete with LED Lamp . 3000K,(For indoor use only)

L-5 SECOND FLOOR - Guest bedroom (1 TO 21 ) (BEDROOM) Downlight Deep Recessed PANEL 9W LM900 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 4000K,Diffused. (For indoor use only)

L-4 SECOND FLOOR - Guest bedroom (1 TO 21 ) (ENTRY) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-4 SECOND FLOOR - Guest bedroom (1 TO 21 ) (TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-4 SECOND FLOOR - Guest bedroom (1 TO 21 ) (Study Table) Concrete Hanging light with LED bulb , base concrete holder & color wire ,3000k

L-1 SECOND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 SECOND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 SECOND FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-1 SECOND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 SECOND FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 SECOND FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-4 THIRD FLOOR - (GENTS DORMITORY) X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR (GENTS DORMITORY) X 2 Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - (GENTS DORMITORY) X 2 (TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-6 THIRD FLOOR (GENTS DORMITORY) X 2 (TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - (LADIES DORMITORY) X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR (LADIES DORMITORY) X 2 Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - (LADIES DORMITORY) X 2 (TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-6 THIRD FLOOR (LADIES DORMITORY) X 2 (TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - (DRIVER /COOK) X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR (DRIVER /COOK) X 2 Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - (DRIVER /COOK) X 2 ((TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-6 THIRD FLOOR (DRIVER /COOK) X 2 ((TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - ROOM FOR GROUP 'C' DOMITORY - 1 X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR ROOM FOR GROUP 'C' DOMITORY - 1 X 2 Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - ROOM FOR GROUP 'C' DOMITORY - 1 X 2 (TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-4 THIRD FLOOR - ROOM FOR GROUP 'C' DOMITORY - 1 X 2 (TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - (ROOM FOR GROUP 'C' DOMITORY - 2) X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR (ROOM FOR GROUP 'C' DOMITORY - 2) X 2 Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - (ROOM FOR GROUP 'C' DOMITORY - 2) X 2 (TOILET) Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-4 THIRD FLOOR - (ROOM FOR GROUP 'C' DOMITORY - 2) X 2 (TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - (ROOM TYPE 4 )X 2 Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-4 THIRD FLOOR - (ROOM TYPE 4 )X 2 (TOILET) Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-1 THIRD FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 THIRD FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 THIRD FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-1 THIRD FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-1 THIRD FLOOR - 1500 MM WIDE PASSAGE Customised LED Profile 10Watts with Rigid Strip 1100Lumens, aluminium anodisd ,3000K Diffused LED .

Non Dimmable Power Supply

L-7 THIRD FLOOR - 1500 MM WIDE PASSAGE Downlight Deep Recessed Ring LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply. ,PKW, 3000K,36°. (For indoor use only)

L-4 THIRD FLOOR - MALE DOMITORY 9 BEDS Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR MALE DOMITORY 9 BEDS Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - MALE TOILET Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-6 THIRD FLOOR MALE TOILET Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

L-4 THIRD FLOOR - FEMALE DOMITORY 8 BEDS Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-10 THIRD FLOOR FEMALE DOMITORY 8 BEDS Downlight Recessed 2X 2 PANEL LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,4000K,PKW,Diffused (For indoor use only)

L-4 THIRD FLOOR - FEMALE TOILET Downlight Deep Recessed EVO 70 with honeycom Louver & Double Hosuing , Tiltable LM1200 IP20 Complete with LED lamp& Non-Dimmable Power supply,PKW, 3000K,36°. (For indoor use only)

L-6 THIRD FLOOR FEMALE TOILET Downlight Deep Recessed Mini EVO LM500 IP20 Complete with LED lamp& Non-Dimmable Power supply,,PKW, 3000K,36°, (For indoor use only) )

OUTDOOR Wall Mounted Bulkhead Light LM1000 Complete with LED Lamp & Non Dimmable Power supply .

Spike Light LM1000 Complete with LED lamp & Non Dimmable power supply.

Customised Bollard light complete with LED lamp & Non Dimmable Power supply..

Wall mounted Up & down Light LM1000 Complete with LED lamp & Non Dimmable power supply

Customoised Pole Light