PERIODICAL SERVICES TO MARRIED AND OTM ACCN AT VARIOUS BUILDINGS AT AVADI AND ZONE C AREA( KALPAKKAM AND VELLACHI), MAINTENANCE OF E/M INSTALLATIONS (CIVIL WORKS) IN VARIOUS LOCATIONS IN CHENNAI UNDER AGE(I) NAVY CHENNAI

Amount

M&L for preparation of old decorated plastered/ unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated plastered/ unplastered surfaces of ceilings and applying one coat of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls and applying one coat of cement based paint for walls complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick with CM 1:4 on walls, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of cement based paint for walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash for walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted wood and wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for washing rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered wall surfaces and applying one coat of weather proof exterior emulsion over acrylic water based primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls and applying one coat of colour wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old treated surfaces of any description over 10cm width or girth and applying under coating varnishing complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames)exceeding 1.5 sqm but not exceeding 4.00 Sqm each

Taking down wooden shutter of any description not exceeding 1.0Sqm each and refixing the same opening resecuring and adjusting etc complete

Taking down wooden shutters of any description not exceeding 1.0 sqm but not exceeding 2.0 sqm each and refixing the same opening resecuring and adjusting etc complete

Taking down wooden shutters of any description but exceeding 2.0 sqm and refixing in the same opening complete

S&F 4mm thick plain glass panes including hacking out old brocken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing clips, channel

Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside

S&F 5.50 mm thick plain glass panes including hacking out old brocken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing clips, channel

S&F figured glass pin headed type 4mm thick including hacking out old brocken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing clips, channel

S&F PVC water tanks rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres complete as in fixed in repairs

S&F PVC water tanks rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 750 litres complete as in fixed in repairs

PVC water tank Cover with fittings suitable upto 1000 litres capacity as in repairs

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) and fixed as in repairs of bore of pipe 20mm

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) and fixed as in repairs of bore of pipe 25mm

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 500 litres and not exceeding 1000 litres complete

Taking up or down steel tubing 15mm dia and connections including clearing for refixing etc and refixing for refixing etcand refixing old steel pipes and connection in new orold position( Wals, ceiling, floors etc.)

All as per Sl item No. 29 above but 20mm dia

All as per Sl item No. 29 above but 25mm dia

S&F steel watertubing 15mm dia and connectios including all fitting and fixed complete to walls and ceiling or laid in floors as in fixed in repairs

S&F steel watertubing 20mm dia and connectios including all fitting and fixed complete to walls and ceiling or laid in floors as in fixed in repairs

S&F steel watertubing 25mm dia and connectios including all fitting and fixed complete to walls and ceiling or laid in floors as in fixed in repairs

S&F second class hard wood palin, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, etc, complete.

S&F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density of thickness 35mm in second class hard wood

All as per item above but 30mm thick in windows without sash bar

S&F 30mm thick flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides.

Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 100mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed inrepairs coplete

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed inrepairs coplete

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repairs

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed of size 75mm complete all fixed in repairs

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed of size 100mm complete all fixed in repairs

S&F 100 mm Aluminium handles, cast type, anodised etc all as fixed in repairs complete

S&F 75 mm Aluminium handles, cast type, anodised etc all as fixed in repairs complete

Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames as in repairs

S&F MS angle in mild steel works as in hold fasts and similar small articles etc complete

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as hold fast, kerb stone etc.

M&L Plain cement concrete 75mm thick, type C1, 1:3:6, using 20mm graded stone aggregate, as in plinth protection complete

Taking down cement plaster any description, on brick or stone walls or ceiling , etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L Rendering 15mm thick in cement mortar 1:6 on concrete /Brick surfaces complete all as specified and as directed.

M&L Rendering 10mm thick in cement mortar 1:3 on fair faces of concrete surfaces of wall finished fair anf even complete all as specified and as directed.

Preparing plastered or unplastered new decorated surfaces of walls and applying two coats of cement based paints including finishing with putty in narrow widths, bands, cornices pilasters etc,. all as specified .

Preparing newly plastered surfaces of walls and applying three coats of white wash on plastered ceiling surfaces including in narrow widths, bands, cornices, pilasters etc.,

S&F 15 mm dia Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe as in repairs complete

S&F 20 mm dia Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe as in repairs complete

S&F 32mm Waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts,as in repairs complete

PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

Vitreous china squatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests with "P" or "S" trap, fixed as in repairs complete

PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle, including brackets and connections

PVC 32 mm dia fllush pipe for low level fulsh tank fixed including all joints as in repairs complete

S&F Vitreous china wash basin, white, flat back, size 550mm x 400mm but including brackets and fixed in reapirs

PVC waste hose pipe with 32mm dia as waste pipe to WHB/urinal/sink as in repairs complete

S&F 40 mm dia chromimun plated waste coupling fixed in sink as in repairs

Dismantling of PVC drain pipe up to 150 mm dia including all fittings such as bend, Tee and single 'Y' etc.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete.

S& F PVC SWR pipes 75 mm single socketed in any length with rubber ring joints fixed to walls

S&F 110mm PVC (SWR) bends any redius complete.

S & F of 110 mm dia PVC (SWR) junction single door T equal or unequal

S&F PVC SWR vent cowl 110mm

S&F 75mm PVC (SWR) bends any redius complete.

S&F PVC SWR Junction single door T equal or unequal 75mm dia.

S&F PVC SWR vent cowl 75mm

S&F PVC 75 mm size (SWR) floor trap plain with grating including jointing with solvent paint

Sri Sankar Enterprises