SPECIAL REPAIRS TO BLDG NO. P-880 SINGLE MEN BARRACK OF CERTAIN AREA AT MIL STN JAISALMER OF GE (A) JAISALMER

Amount

Taking down cement or cement lime plaster from stone walls etc including racking out joints hacking for key scrubbing down with water etc & removing rubbish out side MD land all as directed.

Dismantling floor, hearth or wall tiling including cement mortar, removeing and rubbish off the premises.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land all as directed by Engineer-in-charge.

M&L for joint less (vertical joints)ceramic coloured tiles with mat finish and area of tiles exc 0.11 Sqm but n.exc 0.18 Sqm by 7-8mm thick grade B-II (a) superior quality confirming to IS 13755 as in floors set & jointed in neat cement slurry and pointed in coloured cement to match the tiles and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L for joint less (vertical joints)ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L for glazed ceramic drak shade tiles in vertical surfaces 350x250x7mm or 450x350x7mm set and jointed in neat cement slurry and pointed in coloured cement incl boarder tiles with 15mm thick rendering as in backing coat of CM 1:6 all as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 10 mm thick on concrete surface in cement mortar 1:6 & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 & finished the surface even & fair without using extra cement all as specified.

M&L Preparation of plastered surfaces and applying three coats of white wash on ceiling surfaces all as directed

M&L for Preparation of old plastered surfaces and applying one coat of white wash on walls all as directed

S&F flush pipe of polyethylene of low or high density of PVC 32mm dia for low level flushing cistern / WHB.

S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs. (Make:-Cera Cat No S3010102 , Hindware Cat part No - 20042)

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.(Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird)

S&F in repair 600 x 450 mm x 6 mm thick glass mirror with double coat for protaction and longevity grounded edges for safety and siliver plating on the back for better reflection all as specified.(Make:-Prayag Cat part No BLM-01,Cera Cat part No B3510112,Swastic,Modi Guard, Saint Gobin)

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Taking down shutters exc 1.00 but not exceeding 2.00 Sqm each

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete.

S&F 150 mm long Aluminium handles, cast type, anodised complete.

S&F Butt hinges 100 mm including necessary welding if required all as directed by Engr- in -Charge.

S & F MS Pressed handle 150mm size oval type stove enameled black

S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed

S & F mild steel tower bolts 150 mm long stove enameled black with bright bolt complete all as specified and directed.

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel all as directed by Engineer-in-Charge

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc all as specified and as directed.

S&F factory made solid PVC moulded masonic door shutter 28 to 30 mm thick (style) with 2, 4, 6 raised panel design with 2 mm moulded PVC sheet on the front face and2 mm moulded PVC sheet on back face supply and fixing in the frame at site as per specification with particle board core complete all as specified and directed.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame exc 1.5 sqm including punching or drilling out old glazing pins/ springs clips and providing and fixing new ones.

S & F 4 mm thick plain glass and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

M&L Squared rubble walling jodhpur type ,brought up to coursesd ,well bonded ,bedded solidly hearted & builted in CM 1:6

M&L Squared rubble walling jodhpur type ,brought up to coursesd ,well bonded ,bedded solidly hearted & builted in CM 1:6 but except stone

M&L for preparation of old surface of wall and ceiling by complete removal of existing treatment .

Extra over Sand stone walling for hammer dressing to face stones and dressing of face beds and joints with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm , as specified, of squared rubble walling, brought up to courses

M&L for Preparing newly putty surfaces and applying two coats of oil bound distemper over one coat of primer on walls.

S&F GI tubing (ISI) marked) medium grade with all fitting including taking down old pipe and fixed complete to wall ceiling or laid in floors of inclduing taking down existing steel tubing following sized :-

(a) 15 mm bore

(b) 20 mm bore

S&F bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia fixed in repairs.

S&F stop valve 15 mm bore CP fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repairs.

S & F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls all as directed by Engineer-in-Charge.

M&L for PCC 50 mm thick type C1 1:3:6 (20 mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even & fair without using extra cement& filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L Preparation of old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint

S&F Precast Reinforced Cement concrete Type B0 (Using 12.5 mm graded stone aggregate) in 35 mm thick Jallies or louvers including all mouldings complete and set in Cement Mortar 1:4

S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks

S&F of 15mm dia bore of pipe Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Preparing old plastered or un plastered surfaces and applying one coats of cement base paint on surfaces of walls.

M & L for machine cut kota stone slab flooring 550x550x18 to 20mm thick laid over cement screed bed jointed & pointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing including over a screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes all as specified.

M & L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing including over a screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes all as specified.

M&L for granite slab of any type of 18mm thick machine cut bedded and jointed with grey cememt slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and plishing complete all as specified and directed.

M&L for applying two coat of distemper oil emulsion over a coat of primer over putty surface complete all as specified and as directed by Eng-in-Charge.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded but without glazing bars

S & F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290-Gde-E-165

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S & F tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc.

S & F 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane

Taking down carefully old copper/Aluminium point wiring , fitting and fixtures complete such as switches,ceiling rose, pendenent, regulators, sockets etc , removing unserviceable materials from site and making good disturbed surface etc complete as per arrounding and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. in and inciuding medium grade, PVC conseled conduit and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FR LS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan point controlled by one switch 5 Amp one way

(b) One fan point controlled by one switch 5 Amp one way

(c) One socket outlet 3 pin 5 amps same board

(d) One socket outlet 3 pin 5 amps Independent board

-Ditto- all as per item No 74 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F of Lamp holder,PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified

S & F ceiling rose three terminal 230 volt Make : ANCHOR

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 54 IK*09 complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . Make - Legrand cat part No. 507735or equivalent make in L&T/ ABB or WIPRO etc

S&F MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 8 way double door type complete all as specified.

S&F MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 4 way double door type complete all as specified.

Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

Supply and fixing MCB's SPN 6 to 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve,Make : Legrand ,C&S,Indo Asian

S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 125 Amps with extended terminals complete all as specified.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

S & F bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers,painting complete as specified.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conceled conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete including taking down old unserviceble sub main wiring all as specified.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable one run of PVC conceled conduit shall be paid as one unit length)

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including taking down of old unsv earthing of any type and testing on completion complete all as specified and directed.

AMBEY MAA CONSTRUCTION COMPANY

JASOL MAA ENTERPRISES

GEMRARAMCONTRACTOR

Leelashah Enterprises

M/s Shri Inder Construction Company

S K TRADER