ADDITION ALTERATION AND SPECIAL REPAIRS TO CERTAIN BUILDINGS AT MEG CENTRE AT BANGALORE

Amount

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demoltion of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down shutters of any description area n exc 1.00 Sqm each etc complete all as specified and as directed

M&L for 100 mm thick cement concrete 1:4:8, type D2 (using 40mm graded agg) as in sub base for path etc complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in levelling course of flooring etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:2:4, type B-1, using 20 mm graded aggregates as in plinth protection etc, finished fair surface complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for Virified Ceramic tiles 8 to 10 mm thick coloured tiles (square/ rectangular) polished, area of each tiles area not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 10 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for M-Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size PU moulded confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed .

M&L for Glazed ceramic coloured tiles 350X250X7mm/ 450X350X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in CM 1:3 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for pre-cast Cement concrete Type C1 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 incl raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed

M&L for Reinforced Cement Concerete 1:2:4 (nominal mix) Type B-0 as in damaged Chajja (soffits)/ down ward Facia/ Vertical Surface by complete removing of damaged portion including removing the rusted portion of steel iron incl form work etc complete all as specified and as directed Notes : Reinforcement shall be measured and paid separately

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4 (nominal mix) Type B-1 as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed Notes : Reinforcement shall be measured and paid separately

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified and as directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface including removal of debris outside the MD land, etc. complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) first layer and rendering 5 mm thick second layer in CM(1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacturers instruction fair finished, etc. complete all as specified and as directed. Notes : WPC shall be measured and paid seperately

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. including taking down existing treatment including PCC as in sunken protion of WC and removing debris beyond the premises of site. The following are included in the rate quoted and procedures to be adopted during the execution of work :- (i) 20mm thick rendering at bottom surface in cement mortar 1:4 mixed with liquid water proofing compound. (ii) 15mm thick rendering at side wall surface in cement mortar 1:4 mixed with liquid water proofing compound. (iii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iv) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (v) Provide 40mm dia light grade GI spout at the lowest point with 20cm projection beyond the out face of the wall. (vi) Cement concrete 1:4:8 type D2 using 40mm graded stone aggregates as in sunken portion of WC. Note:- Plan area only will be measured for payment purpose.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for screed bed 10mm thick in CM 1:3 over concrete surface mixed with water proofing compound as per manufacturers instructions complete all as specified and as directed.

M&L for APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.40 Ltr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacture's instruction and applying a coat of solar reflective aluminum paint on top @ 0.10 litre/Sqm including removing of existing roof treatment along with cement screed and removal of debris to outside MD land complete and removing of all loose gravel,dirt,oil,grease and foreign materials by jet or dry air,cleaning the surfaces mechanically or by grinding to make it smooth complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C0 (using 12.5mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, etc. complete all as specified and as directed.

S&F 35mm thick flush shutter solid core construction block board with decorative choice lamination 0.9mm thick both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including painting in two coats of synthetic enamel paint over a coat of pink primer, etc. complete all as specified and as directed.

S&F in repairs 18/19MM thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,fixed in kitchen Cabinet or cupboards complete all as specified and as directed.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or beads of second class hard wood fixed to cupboard shutter not exc 6sqcm cross section area complete all as specified and as directed.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter exc 6 sqcm but not exc 13 sqcm cross section area complete all as specified and as directed.

S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass,polished complete all as specified and as directed.

S & F in repairs 30 mm width of flap (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanised etc complete all as specified and as directed.

S & F for solid PVC frame (Single Rebated) of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete as sepecified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification:- (a) Alu frames of size 45x45x1.5mm (b) Rail & Stile 45x45x1.5mm thick (c) 4.80mm thick frosted sheet glass Note:- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers complete all as specified and as directed.

Supply and fix Aluminium powder coated Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter complete all as specified and as directed. (a) Aluminium frame size 92x31.75x1.5mm (b) Aluminium shutter weight not less than 0.55 Kg/Rm

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as specified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick butt hinges, medium weight, Stainless steel and fixed etc complete all as specified and as directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.

S&F Aluminium 100 mm Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick 304 grade kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmetc complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S&F in repairs vitreous china hand wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed.

S&F in repair 15mm Bib taps Fancy type, Chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repair 15mm bore dia of pipe CP Mixer for mixing hot and cold water screwed down for iron pipe etc complete all as specified and as directed.

S&F in repair 15mm dia Angle / Stop / Concealed cock, Fancy type cast copper alloy, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.

S&F in repairs 15 mm Centre hole Basin mixture without Pop Up all as specified and as directed. Cat No 6850 Marcus series of Prayag or equivalent make as specified in CA.

S&F in repairs 15 mm Sink mixture with regular spout wall mounted all as specified and as directed.(Cat No 6855 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs 100 mm overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed.

S&F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed.(Cat No-BEA-41 of Prayag or equivalent make as specified in CA)

S&F in repairs Soap dish chromium plated brass complete all as specified and as directed. (Cat Part No BA-45 of Prayag or equivlaent make as specified in CA)

S&F in repairs looking mirror 600x450x5-6mm thick with frame complete all as specified and directed. (Cat No BLM-01F of PRAYAG or equivalent make as specified in CA)

S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall complete all as specified and directed.

S&F in repairs Stainless steel plate rack of size 914.0mmx914.00mm 0.85mm thickness including fixing to wall Cat no P-350 of Prayag or equivalent make as approved by GE complete all as specified and as directed.

S&F in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed.

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed. (Cat no BA-41 of Prayag of equlavent make specified in CA)

S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1) complete all as specified and directed.

S&F in repairs peg set of six fixed in wall complete all as specified and directed. (Cat No BEA 30 of Prayag or equivalent make specified in CA)

S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified and directed.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed.

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve complete all as specified and directed.

S&F PVC connection 600mm long 15mm dia complete all as specified and directed.

S&F 6 feet x 4 pipes pully operated cloth drying system consisting of anodised aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm. Pulleys made up of delrin with rope guide mounted on channel pair of lengh 24 inches (distance between two pipe is adjustable). Locking system to hide rope knot . Channel to be mounted or fixed with self-tapping screws provided in kit .Rope will be polyester braided undyed of 3-4 mm dia complete all as specified and directed.

S&F in repairs 75 mm dia of PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed.

S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed on walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed.

S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floors incl dismantling of existing pipe line and fittings etc complete all as specified and directed.

S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed on walls incl dismantling of existing pipe line and fittings etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) Junction (Single-T) equal or unequal etc complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) Junction (Single-T) equal or unequal with access door etc complete all as specified and as directed.

S&F 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed.

S&F 75mm PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed.

S&F 75mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed.

S&F 110 mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

S&F 75mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed.

S&F in repairs 110 mm dia bore PVC (SWR) vent cowls complete all as specified and as directed.

S&F 75 mm dia bore PVC (SWR) vent cowls complete all as specified and as directed.

Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for preparing of old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for preparing of new plastered suface of walls and applying two coats of acrylic distemper, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L for preparing of old plastered suface of walls and applying two coats acrylic distemper, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L for preparing new/old previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M&L for preparation of new/old or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, etc. complete all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod (including bracket) of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed.

S&F in repair brass chromium plated designer bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc including dismantling of Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed.

Dismantling of timber scantlings unframed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section description complete all as specified and directed.

M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

Dismantling of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

S&F in position suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using and including 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6,Type C1,using 20mm graded stone aggregate,exc 10cm in width and setting in CM 1:4 complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete all as specified and directed.

M&L for laying of DWCPE Sewage pipes line 150 mm inner dia bore of pipe class SN-8 including sealing of joints, fittings etc complete with collars complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested complete all as specified and directed.

M&L for TMT bars 6mm dia to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No above here-in-fore but 12mm dia bars for handles conforming to Fe290Gde E-165 complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of cable/pipes etc. and n exc 1.5 m in depth and getting out any type of soil complete all as specified and directed.

Excavation in trenches,not exceeding 1.5m wide and exceeding 1.5m and not exc 3.0m in depth and getting out in any type of soil type of soil complete all as specified and directed.

Returning,filling including, spreading, levelling , watering and well ramming in layers not exceeding 25 cm in any type of soil

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

E/M ITEMS

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multi stranded copper conductor confirming to IS-694 1990 wih ISI marked (for phase, neutral and earth) in and including non-metalic rigid PVC conduit medium grade with ISI Mark of minimum 20mm dia and all conduit accessories concealed including cutting/ chases in wall / ceiling / fixed to roof/ truss/ columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets, fan regulators etc. of suiable size modules and the earth wire of size 1.5 sqmm to be connected to common earth dolly complete all as specified and directed for the following:-

One light / fan/ Exhaust Fan point controlled by one switch

One light controlled by two way switch

One 3 pin socket out let 5 Amps on independent board

one 3 pin socket out let 5 A on same board

one Bell / Buzzer Point controlled by bell push

M&L for Point wiring complete all a specified with 1100 Volts grade 2.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS 694 1990 with ISI marked (for phase, neutral and earth)in and including non-metallic rigid PVC conduit medium grade ISI Mark of minimum size 20mm dia all accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes for fixing modular sockets of suitable size modules and the earth wire of size 2.5sqmm to be connected to common earty dolly all as specified and as directed for One three pin modular switch socket 16 amps outlet on independent board complete all as specified and as directed.

S&F of Modular switch 1 way 6A,1 module complete all as specified and as directed.

S&F of Ding Dong bell AC 230 volts single pole complete all as specified and as directed.

S&F of Modular Bell push 6A 1 module complete all as specified and as directed.

S&F of modular type Fan step regulator, 120W - 2 module complete all as specified and as directed.

S&F of Modular switch 2 way 6A,1 module complete all as specified and as directed.

S&F of modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F of Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F of Modular Type shuttered Socket outlet,3 pin 6/16 Amps, 230 volts Two modules with ISI mark complete all as specified and directed.

S&F angle holder PVC/ Polycarbonate type complete all as specified and directed.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F in replacement of RCBO 2-Pole volts 100mA 40 Amps complete all as specified and as directed.

S&F in 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) SPN and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB DB SPN 12 way, 240 volts double door with locking system complete all as specified and as directed.

S&F MCB DB TPN 4 way double door for provision of MCB TPN as incoming, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed. Note :- MCB shall be measured and paid separatly.

S&F 415V, 10 KA 'B' curve miniature circuit breaker (MCB) TPN and current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals complete all as specified and as directed.

Disconnecting the power supply from the mains taking down the sub main wiring 2/3/5 core and of sizes up to 10 sq mm Aluminum/copper conductor all as spcified and as directed.

M&L for Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed. Note : three runs of cable and one run of conduit shall be measured as one unit.

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on complete all as specified and as directed.

S&F LED building Security light fitting 18-22 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including connecting the fitting and connector with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down fan, sealing cable end,dismantling blades and removing& deposit fan and blades to store & re fixing after cleaning/painting in the same location complete all as specified and as directed.

S&F in replacement GI Bracket made out of GI tubing medium grade 40 mm bore, approx length 0.75 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers for Kitchen of Md Accn complete with required fasteners for fixing at holes in wall as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with blades,louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m toilet of Md Accn complete with required fasteners for fixing at holes in wall as specified and directed.

M&L for making / drilling hole to brick wall of any thickness for fixing exhaust fan of 300/250mm dia and fixing of precast RCC circular frame of suitable dia 40mm thick and filled gap with PCC (1:2:4) incl plastering, white washing etc for making good and match to existing wall surface complete all as specified and as directed.

S&F TV Coaxial Socket for Cable TV complete all as specified and as directed.

M&L for Rigid non-metallic PVC conduit 25 mm dia exclusive of teriminal boxes but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc (For carrying Telephone wire/Data cable) complete all as specified and as directed.

S&F decorative wall mounting champange gold finish fixture with plastic body suitable for and including with 9 watt LED lamp B-22 base complete all as speciied and as directed.

S&F electric water heater,storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece (hot and cold brass connection pipe), etc. complete all as specified and directed.

S&F Bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm dia complete all as specified and directed.

S&F 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittingsfixed complete to walls, ceilings or in floors etc.of size 15mm dia. complete all as specified and directed.

M&Lfor fine seived excavated dry Soil (riddled earth) laid to the required width of trench at botom and top of cable as cushioning complete all as specified and directed.

Supply and lay well burnt sub class B bricks as mechanical protection to underground cables laying with length of the trench complete all as specified and directed.

Supply and lay Galvanised iron pipes light grade of dia 40 mm including fittings in trenches/wall/poles including dismantling and taking out of old unserviceable existing pipe, etc. complete all as specified and directed.

Supply, lay and test cable XLPE insulated,Screened PVC beded galvanised steel strip or wire armoured electric power cables (Heavy Duty) with stranded aluminium conductor, 1100 volts (1.1 KV) grade of size 3.5 core 35 Sqmm including dismantling and taking out of old unserviceable existing cable, etc. complete all as specified and directed.

Supply, lay and test cable XLPE insulated,Screened PVC beded galvanised steel strip or wire armoured electric power cables (Heavy Duty) with stranded aluminium conductor, 1100 volts (1.1 KV) grade of size 4 core 25 Sqmm including dismantling and taking out of old unserviceable existing cable complete all as specified and directed. Note for item no 167 & 168 :- Earthwork excavation will be measured and paid separately.

M/S POTHIRAJ AND CO (BID ID -3382393)

Sai Ram Builders (BID ID -3382689)

PRACHANIVA CONSTRUCTIONS (BID ID -3381772)

bholanath bera (BID ID -3382903)

Shanthi Construction (BID ID -3381250)

B5BUILDING SOLUTIONS (BID ID -3376448)

D NAGI REDDY (BID ID -3382480)