REPAIRS TO INTERNAL WIRING ETC IN VARIOUS BLDGS AT MUTAGA NORTH AND SOUTH CAMP AT ATS BELGAVI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc.all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. all as specified and directed.

Material and labour for concealed point wiring with 1.5sqmm PVC insulated and unsheathed copper cable FRLS 1100V grade multistranded drawn in concealed PVC conduit of suitable size and incl provn of PVC insulated and unsheathed, 1.5sqmm copper conductor cable as earth continuity conductor including suitable terminal boxes and white cover plate with frame for fixing switches, sockets regulator etc for one light / bell / fan point controlled by one switch. (Note: Rate for cutting and chassing and making good with cement mortar 1:3 is not included in the unit rate considered and the same is measured and paid separately under relevant items).

One light point / fan point controlled by one switch

One 3 pin switch socket outlet, 5 Amps, independent

Material and labour for concealed point wiring with 2.5 sqmm PVC insulated and unsheathed copper cable FRLS 1100V grade multistranded drawn in concealed PVC conduit of suitable size and incl provn of PVC insulated and unsheathed, 2.5sqmm copper conductor cable as earth continuity conductor including suitable terminal boxes and white cover plate with frame for fixing switches, sockets regulator etc for one 3 pin socket outlet 15 Amps independent (Note: Rate for cutting and chassing and making good with cement mortar 1:3 is not included in the unit rate considered and the same is measured and paid separately under relevant items.)

Material and labour for cutting chasses, pinning in brick Masonry and making good the disturbed surfaces to match the existing surfaces where required and pointing in cement mortor 1:3 to ends for concealed wiring etc. all as specified and directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping of suitable size not less than 25mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing / distempering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as specified and directed.

One light/fan/bell point controlled by one switch

One 3 pin switch socket outlet, 5 Amps, independent

One 3 pin switch socket outlet, 5 Amps on the same board with other switches

One light point controlled by two 2-way switches on independent board.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 2.5 sq mm size FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping of suitable size not less than 25mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing / distempering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 2.5 sq mm size FRLS copper Cable as earth continuity connected with common earth dolly complete for one 3 pin socket outlet 15 Amps on independent board all as specified and directed.

Supply and fix switch piano, flush type single pole, one way 5 Amps all as specified and directed.

Supply and fix bell push, flush type, 5 Amps all as specified and directed.

Supply and fix switch socket outlet 2/3 pin 5 Amps flush type all as specified and directed.

Supply and fix switch socket combination multipurpose 2 in 1, 3 pin 5 /15 Amps universal type controlled by one switch all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type 100 to 180 Watt surface type all as specified and directed.

Supply and fix electric call bell Ding-Dong type AC 230 volts single pole including taking down old unserviceable bell all as specified and directed.

Supply and fix Ceiling rose, surface type PVC, 50x25mm, three terminals complete all as specified and as directed.

Supply and fix switch piano flush button single pole two way 5 amps all as specified and directed.

Supply & fix regal batten with LED tube 20 watt for fixing LED tube 20 watt all as specified and directed.

Supply & fixing in repairs LED tube 20 watt all as specified and directed.

Supply and fix in repair Photon ultra bright LED PL-L with very high effcacy suited for installation in existing 2G11 lamp holderall as specified and directed.

Supply & fix in repair PLUTO NEO PANEL 2x2 enviromental freindly, new generation, asthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for ceiling of size 600x 600 mm all as specified and directed.

Supply & fixing in repair TITANIA SLEEK NEW T5 LED tubelight (double side connection ) ultra bright LED tube light with aluminium heat sink & polycabonate diffuser having high efficacy suited for installation in existing T-5 fitting with G5 lamp holders, LED driver out side all as specified and directed.

Supply & fixing in repairs 9/10 watt LED LUMILINE surface and wall mounted LED batten with polycarbonate housing and integrated electrnic driver all as specified and directed.

Supply and fix 10 Watt environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs all as specified and directed.

Supply and fix in repair LED Bulb 5 Watt all as specified and directed.

Supply & fixing in repairs CFL lamp holder PVC Batten / pendent / bracket type all as specified and directed.

Supply and fix in repair INTEGRA GRAND recess mounted down lighter with pressure die cast aluminium heat sink & PC diffuser in white powder coated finish with intrigrated driver of ceiling cut out 175 mm dia and 92 mm height all as specified and directed.

Supply and fix socket outlet 2/3 pin 5 Amps flush type all as specified and directed.

Repairs to ceiling fitting square type consisting 3/2 Nos of CFL lamps of 36 W each including replacing all the unserviceable parts such as , choke, starters, starter holders, lamp holders all as directed. Note :-(i) The unit rate quoted shall be deemed to include for replacement of worn out bolts, nuts, screws, repair to wiring etc wherever required. (ii) Spares such as bipin/4 pin holder, bipin/4 pin holder base and ballast shall be measured and paid separately.

Repairs to tube light fittings patty type or box type 1x40w / 2x40w / 1x20w / 2/4x20w /1X28 w including replacement of fluorescent tubes and spares such as choke, starter, holder, bipin holder and holder base including repairs to internal wiring / connections etc where ever required at location without removing and taking down all as directed. Note :-(i) The unit rate quoted shall be deemed to include for replacement of worn out bolts, nuts, screws, repair to wiring etc wherever required. (ii) Spares such as bipin holder, bipin holder base, starter holder, starter and ballast will be paid for separately

Taking down, dismantling and repairing the light fittings any type including fully rewiring the fitting with twin twisted flexible wire and refixing back in position complete all as specified and directed. Note :-(i) The unit rate quoted shall be deemed to include for replacement of worn out bolts, nuts, screws , wires etc wherever required. (ii) Spares such as bipin holder, bipin holder base, starter holder, starter and ballast will be measured and paid for separately

Supply only bipin/4 pin holder for 28 watt/36 watt/20 watt fitting to replace for repairing the light fitting.

Supply only starter holder to replace for repairing the light fitting.

Supply only base for bipin holder to replace for repairing the light fitting.

Supply only starter 40 /20 Watts 230 V.

Supply only Ballast 20, Watts 230 V.

Supply only 4 pin holder suitable for CFL 36 watts.

Supply only Ballast 36 Watt VPIT suitable for CFL 36 watts .

Supply only ballast 40 w electronic type suitable for Fluorescent tube light fittings 36 watts.

Supply only ballast 28 w electronic type suitable for Fluorescent tube light fittings 28 watts.

Supply and fix in repair double door DB 12 way SPN with 200 Amps rated bus bar 240 Volts with double door all as specified and directed.

Supply and fix in repair double door DB 08 way SPN with 200 Amps rated bus bar 240 Volts with double door all as specified and directed.

Supply and fix in repair double door DB 04 way SPN with 200 Amps rated bus bar 240 Volts with double door all as specified and directed.

Supply and fix in repair double door DB 04 way TPN with 200 Amps rated bus bar 240 Volts with double door all as specified and directed.

Supply and fix in repair MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity all as specified and directed.

Supply and fix in repair MCB Single pole & neutral 240 volts 6 to 32 Amps, 10KA rupturing capacity all as specified and directed.

Supply and fix in repair MCB triple pole & neutral 415 volts 16 to 32 Amps 10KA rupturing capacity all as specified and directed.

Supply and fix in repair MCB triple pole & neutral 415 volts 63 Amps 10KA rupturing capacity all as specified and directed.

Supply and fix in repair MCB triple pole 415 volts 32 Amps 10KA rupturing capacity all as specified and directed.

Supply and fix in repair MCB triple pole 415 volts 63 Amps 10KA rupturing capacity all as specified and directed.

Taking down sub main wiring with PVC conduit / CTS of size 2.5/4 sq mm including GI wire all as specified and directed.

Material and labour for sub main wiring two single core PVC insulated and sheathed cables with copper conductor 1100V grade, 2.5 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed on walls / roofs, including one run of 2.5 sqmm PVC insulated and sheathed cable and connecting up complete all as specified and directed. Note:- 3 run of cable along with earth wire and PVC conduit / casing & capping will be measured as one unit length.

Material and labour for sub main wiring two single core PVC insulated and sheathed cables with copper conductor 1100V grade, 4.0 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed on walls / roofs, including one run of 4.0 sqmm PVC insulated and sheathed cable and connecting up complete all as specified and directed. Note:- 3 run of cable along with earth wire and PVC conduit / casing & capping will be measured as one unit length.

Material and labour for sub main wiring four single core PVC insulated and sheathed cables with copper conductor 1100V grade, 4.0 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed on walls / roofs, including two runs of 4.0 sqmm PVC insulated and sheathed cable and connecting up complete all as specified and directed. Note:- 6 run of cable along with earth wire and PVC conduit / casing & capping will be measured as one unit length.

Supply and fix in repair PVC Presto plast box of size 8x10 inch including provision of cutting board for housing P/T Switch/ regulator or socket. Note -P/T switch/ regulator / socket will be measured and paid seprately

Supply and fix in repair PVC Presto plast box of size 4x6 inch including provision of cutting board for housing P/T Switch/regulator or socket. Note -P/T switch /regulator / socket will be paid & measure seprately

Taking down ceiling fan of any size, type and make after disconnecting the electrical connections and refixing back (after cleaning and servicing/ repairing / painting / rewinding) including connecting up with 3 core 0.5 sqmm copper flexible cable from ceiling rose to the fan all as specified and directed. Note:- The cost of cleaning and servicing/ repairing / painting / rewinding work and 3 core 1 sqmm copper flexible cable from ceiling rose to the fan will be measured and paid separately under relevent items of this BOQ.

Repairing of ceiling fan 1200/1400mm sweep cleaning and oiling / greasing and replacing all the unserviceable parts such as bearing, gunmetal bushes, capacitors, bolt/nuts, split pins, rubber reels, mounting clamps etc. all as specified and directed. Note:- (i) Cost of all spares replaced will be measured and paid separately as supply only. (ii) Cost for taking down & refixing where ever required will be measured and paid separately.

Supply only ball bearing suitable for ceiling fans 1200 / 1400mm sweep.

Supply only Capacitor 2.5 mfd for ceiling fans .

Supply only three core flexible wire 0.5 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan etc.

Supply only gun metal bush suitable for ceiling fan.

Supply only rubber reel suitable for mounting ceiling fan

Supply only mounting clamps suitable for ceiling.

Supply only zinc coated bolt / nuts suitable for ceiling fan with suitable hole for inserting split pins.

Supply and replace down rod using 450 mm long 15 mm outer dia MS pipe for ceiling fans duly painted with synthetic enamel paint complete all as specified and directed.

Repairing the unserviceable ceiling fans including transporting to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 1200/1400mm sweep and rewinding by using same gauge of copper wire insulating and varnishing and depositing back to MES store complete all as directed

Taking down Exhaust fan of any size, type and make after disconnecting the electrical connections and refixing back (after cleaning and servicing/ repairing / painting / rewinding) including connecting up with 3 core 0.5 sqmm copper flexible cable from ceiling rose to the fan all as specified and directed. Note:- The cost of cleaning and servicing/ repairing / painting / rewinding work and 3 core 1 sqmm copper flexible cable from ceiling rose to the fan will be measured and paid separately under relevent items of this BOQ.

Repairing of heavy duty exhaust fan of 300mm /380mm /450mm sweep cleaning and oiling / greasing and replacing all the unserviceable parts such as bearing, capacitors, bolt/ nuts, rubber pads, mounting brackets, louvers etc all as specified and directed. Note :(i) Cost of all spares replaced will be measured as supply only under the revelent items of this BOQ. (ii) The labour cost for replacement of the spares is deemed to be included in the quoted rate.

Supply only ball bearing suitable for Exhaust fans 300/380 mm sweep.

Supply only ball bearing suitable for Exhaust fans 450 mm sweep.

Supply only Capacitor 4 mfd for Exhaust fan.

Supply and fixing in repair louvers made out of 18 SWG MS sheet suitable for 300 /380 mm sweep exhaust fan including fixing on wall all as directed.

Supply and fixing in repair louvers made out of 18 SWG MS sheet suitable for 450mm sweep exhaust fan including applying two coats of synthetic enemal paint over a coat of primer and fixing on wall using suitable bolts / nuts etc. complete all as specified and directed.

Repairing the unserviceable heavy duty exhaust fans including transporting to local work shop, opening the motor and taking out the old burnt out copper winding wire from the fan of 300mm sweep and rewinding by using same gauge of copper wire, insulating and varnishing and depositing back to MES store complete all as specified and directed.

Repairing the unserviceable heavy duty exhaust fans including transporting to local work shop, opening the motor and taking out the old burnt out copper winding wire from the fan of 380mm sweep and rewinding by using same gauge of copper wire, insulating and varnishing and depositing back to MES store complete all as specified and directed.

Repairing the unserviceable heavy duty exhaust fans including transporting to local work shop, opening the motor and taking out the old burnt out copper winding wire from the fan of 450 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing and depositing back to MES store complete all as specified and directed.

Taking down heavy duty Air circulars of any size, type and make after disconnecting the electrical connections and refixing back (after cleaning and servicing/ repairing / painting / rewinding) including connecting up with 3 core 0.5 sqmm copper flexible cable from ceiling rose to the fan all as directed. Note:- The cost of cleaning and servicing/ repairing / painting / rewinding work and 3 core 1 sqmm copper flexible cable from ceiling rose to the fan will be measured and paid separately under relevent item of this BOQ.

Repairing of heavy duty Air circulators of 650 mm sweep cleaning and oiling / greasing and replacing all the unserviceable parts such as bearing, capacitors, bolt / nuts, mounting brackets, etc. complete all as specified and directed. Note : (i) Cost of all spares replaced will be measured as supply only under the revelent items of this BOQ. (ii) The labour cost for replacement of the spares is deemed to be included in the quoted rate.

Supply only ball bearing suitable for Air circulators 650 mm sweep.

Repairing the unserviceable Air circulators including transporting to local work shop, opening the motor and taking out the old burnt out copper winding wire from the fan of 650mm sweep and rewinding by using same gauge of copper wire insulating and varnishing and depositing back to MES store complete all as specified and directed.

Taking down wall mounting fans of any size, type and make after disconnecting the electrical connections and refixing back (after cleaning and servicing/ repairing / painting / rewinding) including connecting up with 3 core 0.5 sqmm copper flexible cable from ceiling rose to the fan complete all as specified and directed. Note:- The cost of cleaning and servicing/ repairing / painting / rewinding work and 3 core 1 sqmm copper flexible cable from ceiling rose to the fan will be measured and paid separately under relevent items of this BOQ.

Repairing of wall mounting fan of 600 mm sweep cleaning and oiling / greasing and replacing all the unserviceable parts such as bearing, capacitors, bolt/nuts, mounting brackets, etc. complete all as specified and directed. Note : (i) Cost of all spares replaced will be measured as supply only under the revelent items of this BOQ. (ii) The labour cost for replacement of the spares is deemed to be included in the quoted rate.

Supply only ball bearing suitable for wall mounting fan 600 mm sweep.

Supply only Capacitor 4 mfd for wall mounting fan.

Repairing the unserviceable wall mounting fans including transporting to local work shop, opening the motor and taking out the old burnt out copper winding wire from the fan of 400 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing and depositing back to MES store complete all as directed

Painting of ceiling fans of size 1200/1400 mm sweep complete including down rod and blades with two coats of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc, after cleaning all dust complete all as directed and writing MES No. with black enameled paint complete all as specified and directed.

Painting of exhaust fans of size 300 mm to 450 mm sweep complete including mounting frame and blades with two coats of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc, after cleaning all dust complete all as directed and writing MES No. with black enameled paint complete all as specified and directed.

Painting of air circulators of 650 mm sweep complete including blades with two coats of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc, after cleaning all dust complete all as directed and writing MES No. with black enameled paint complete all as specified and directed.

Painting of wall mounting fans 600 mm sweep complete including blades with two coats of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc, after cleaning all dust complete all as directed and writing MES No. with black enameled paint complete all as specified and directed.

Supply and fix in repair hyleum sheet of size 4"x4" including cutting for fixing P/T switch, socket, regulator etc, complete all as specified and directed. Note - P/T switch / regulator /socket will be measured seprately

Supply and fix in repair hyleum sheet of size 4"x6" incl cutting for fixing P/T switch ,socket, regulator etc. complete all as specified and directed. Note -P/T switch / regulator /socket will be measured seprately

Supply and fix in repair hyleum sheet of size 10"x8" incl cutting for fixing P/T switch ,socket, regulator etc. Note -P/T switch/regulator /socket will be measured seprately

Supply and fix in repair hyleum sheet of size 10"x12" incl cutting for fixing P/T switch ,socket, regulator etc. complete all as specified and directed. Note -P/T switch/regulator /socket will be measured seprately

Supply and fixin repair Plug Top 5 Amps complete all as specified and directed.

Supply and fix in repair flexible pipe 15 mm dia complete all as specified and directed.

Supply and fix in repair ISI marked heavy duty electric alarm bell system suitable for school with minimum audaiable range of 250 metre including all minor accessories such as bolts etc complete all as specified and directed.

DHAIRYASIL RAMAKANT DESAI

M/s. VIJAY ELECTRICALS

ASHIRWAD ELECTRICALS