COMPREHENSIVE REPAIR / MAINT TO BLDG NO C-1, C-2, C-3 OF MES IB AND NGR COMPLEX, O-12 OF ECOM COMPLEX SM-82, O-18, SM-86 OF AOI COMPLEX AND OTHER CONNECTED BLDGS OUTSIDE VIJAY DURG UNDER GE (FW) KOLKATA

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Height)

Material & Labour preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surface of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for any height of the building complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module

Material & Labour for complete removal of existing treatment applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.(Up to 0-4 floor Height)

M&L for applying one coat of synthetic enamel paint on old Painted wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamel paint on old Painted steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying one or more coat of French polish on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as directed by Engineer-in-Charge.

M&L for applying two or more coat of french polish including preparing, cleaning the new surface and applying wood filler on new wooden surfaces of any description over 10cm width or girth complete all as directed by Engineer-in-Charge.

M&L complete Removal of existing treatment and applying two coat of plastic emulsion paint over a coat of primer to old decorated surfaces of wall over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L complete Removal of existing treatment and applying two coat of plastic emulsion paint over a coat of primer to old decorated surfaces of ceiling over 2mm thick wall care putty including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L preparing old painted surface and applying one coat of plastic emulsion paint to old decorated surfaces wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L preparing old painted surface and applying one coat of plastic emulsion paint to old decorated surfaces of ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of oil emulsion distemper to old decorated surfaces of wall including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer and over a coat of putty (2 mm thick) to old decorated surfaces of wall complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two or more coats of oil emulsion distemper over one coat of primer over a coat of putty (2mm thick) to old decorated surfaces of ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of oil emulsion distemper to old decorated surfaces of ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, efflorescent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer over a coat of putty (2 mm thick) all as specified and as directed by Engineer-in-Charge.

M&L applying two coat of plastic emulsion paint over a coat of primer to new plastered surfaces of wall over 2mm thick wall care putty including preparation surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L applying two coat of plastic emulsion paint over a coat of primer to new plastered surfaces of ceiling over 2mm thick wall care putty including preparation surfaces complete all as specified and as directed by Engineer-in-Charge.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L Preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of over a coat of putty (2 mm thick) primer all as specified and as directed by Engineer-in-Charge.

M&L for Providing and applying shall urethane BTD, UV resistant , high performance , water based , cold applied , single component elastomeric in situ liquid membrane for water proofing conforming to ASTM D 6083 on top of concrete roof in two coats @ 9 Kg/10 Sqm for 500 microns dft . one coat of self -priming of elastomeric water proofing liquid (dilution in water in the ratio of 1:1 ) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application /system as per direction of engg-in -charge ) .The operation shall be carried out after scrapping and properly cleaning the surface remove loose particles with wire brushes, complete in all respect as specified and directed.

M&L for painting of exposed brick surface including surface preparation by hand operated or power operated tools i.e. scrappers, wire brushes, sand papers, pumice stone etc. painting should be downer in two coats of thickness of 100 microns each by anti corrosive bituminous black paint tank mastic 100or similar conforming to is;9862 as approved by engineer-in-charge @ 2.50ltr/10 sqm with interval of 8 hours between two coats. the rate is inclusive of all contractor's own labour, materials, tools and plants, leads, lifts, transportation, taxes, octroi etc.. complete as per approved drawing and as directed by the engg-in-charge

M&L for extra addition of polymerised acrylic polymer with 47% solid content shalicrete 47 of step or similar make as approved by GE in cement plaster \ mortar in weight ratio of 50:5 for cement and polymerised acrylic polymer used in cement mortar as per directions of engg-in-charge.

M&L for Application & finishing with UV Resistant Elastomeric Anti-Carbonation Exterior Acrylic WP coating with 2 coats of Shalicryl ( R) 215 of M/s STP Ltd or similar as approved GE @ 3.08 litre/10 Sqm at all locations & levels, prepared and applied as per manufacturer's specifications including preparation of surface by filling of pin holes with cement putty, honey-combing, grinding of edges (if required any)etc. complete. Grinding of excess loose materials in grooves of segment joint and filling of putty in these grooves to make the entire span length monolithic. The coating should be applied over a primed coat of Shaliprime (R) WB of m/s STP Ltd or similar as approved by GE @ 1.25 litre/10 Sqm diluted in the ratio of 1:0.5 to achieve even shade and colour , all complete as per manufacturer's specifications and as per directions of Engineer-in-charge. The rate is inclusive of all contractor's own labour.

Disconnecting exiting water storage Tank of capacity exceeding 1000 lt but not exceeding 2000liters for cleaning of water tank, removing of mud siudge etc and flushing with chlorine water including supply and fixing of any damage accessories for water Tank and writing MES No Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re connecting and refixing all connections complete all as directed by the Engg- in- Charge.

Disconnecting exiting water storage Tank of capacity exceeding 500 lt but not exceeding 1000liters for cleaning of water tank, removing of mud siudge etc and flushing with chlorine water including supply and fixing of any damage accessories for water Tank and writing MES No Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re connecting and refixing all connections complete all as directed by the Engg- in- Charge.

Disconnecting exiting water storage Tank of capacity exceeding 250 but n exc 500 litres for cleaning of water tank, removing of mud siudge etc and flushing with chlorine water including supply and fixing of any damage acces

Supply and fixing PVC casing/capping of size 25 mm with all accessories all as directed by Engr-in- charge .

Supply and fixing PVC casing/capping of size 20 mm with all accessories all as directed by Engr-in- charge .

S&F GI tubing medium grade of size 15 mm dia incl painting and making hole for extension of fan hook in high roof ceiling complete all as specified.

M&L coloured glazed ceramic tiles in vertical surfaces 600 x 300 x 7-8 mm thick / 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.11 sqm but n.exc0.18sqm (400 X400 X 7-8 mm), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:4 complete all as specified and directed by Engineer-in-charge.

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06Sqm buy n. exc 0.11 sqm (300X300X7-8mm),as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bedding in CM 1:4 complete all as specified and directed by Engineer-in-charge.

S&F in repair 12 mm thick toughended glass Door and partition and jointed with adhesive including fixing Connections old one all as specified and as directed by Engineer-in-Charge.

S&F over head shower 100 mm round shape single flow ( Abs body chrome plated with grey face plate ) with rubit cleaning system with arm (Make : Jaquar Cat No- OHS-CHR-1789 , ( Ess-Ess ) Cat No OH -103A (HAWK) all as specified and as directed by Engineer-in-Charge.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, coloured tiles as in floor etc set and jointed in cement mortar screed bed 15 mm thick in cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

Supply only MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed. Cat No 408587-95, make: Legrand or equivalent make specified in tender.

M & L Vitrified colour (light shade) Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 20mm thick CM 1:4 all as directed (conforming to IS).

M & L 18-20mm thick granite slab (table rubbed and polished)in pillars, window cills, cooking platform, stair steps etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 15 mm thick CM 1:4 complete all as specified and directed by Engineer-in-charge.

S&F in repair fancy type CP wall mixer 3 in-1 with provision for over head shower & telephonic shower arrangement screwed for iron pipe including taking down old complete all as specified and directed by Engineer-in-charge..(Make : Jaquar Cat No. KUP-35125PM and CERA Cat no- F2004403 (chrome) or equivalent make specified in tender.

S&F in repair CP waste coupling 32mm bore full threaded (chrome) all as specified

S&F 15mm angular stop cock chromium plated with wall flange as in repair complete all as specified and directed (Make : Jaguar cat no- CHQ-CHR-23059 and Ess Ess cat No. C-204 ) or equivalent make specified in tender.

S&F in repair CONCEALED stop cock with flange CP for 15mm bore pipe complete all as specified and directed .(Make : Jaguar cat no- ALD-083FT and Ess Ess Cat No. C-253A) or equivalent make specified in tender.

S&F In repair CP bottle trap casted heavy 32mm/190mm pipes (Chrome) complete all as specified and directed

All as per Ser Item No 121 above but 20 mm bore

S&F in repair toilet paper holder chromium plated complete all as specified and directed ( Make : Jaquar Cat No: A CN :1153N and CERA cat no- F5001109 (Chrome) or equivalent make specified in tender.

S&F in repair Towel ring round shape chromium plated complete all as specified and directed (Make : Jaguar cat no- CAN-CHR-1121BN and Ess Ess Cat No.AC-502)(Chrome) or equivalent make specified in tender.

S&F Chromium plated brass central hole basin mixer with pop-up- waste system with 450 mm long copper pipe and brass nut etc fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed. Make- Jaquar Cat no-KUP-35011BPM and CERA cat no- F9050452 or equivalent make specified in tender.

S&F in repair 15mm bore bib cock with wall flange for 15mm bore pipe chromium plated complete as specified and as directed. (Make : Jaquar cat no - CON-CHR-047KN and Ess Ess Cat No. T-103D)(Chrome) or equivalent make specified in tender.

S&F in repair 15mm dia shower health faucet chromium plated with 01 meter long flexible tube and suitable wall hook complete as specified and as directed .(Make : JAQUAR Cat No. ALD 587 and CERA cat no- F8030102 (chrome) or equivalent make specified in tender.

S&F in repair Chromium plated soap dish complete as specified and as directed (Make : Ess Ess Cat No. AC703 and Parryware cat no- T6503A1 (Chrome) or equivalent make specified in tender.

S&F Vitreous china wash hand basin white, flat back, size 550X400mm including cutting for and pinning in ends of brackets or erecting stand including fixing with full height pedestal for wash basin but exclusive of fixing of supply and waste pipe all as spd and directed by Engr-in-Charge.

S&F in repair Special designed Acrylic shelf of size (56Cmx13Cm) with CP wall flange all as directed by Engineer-in-Charge(Make - Ess Ess) Cat No. AC-107 or equivalent make specified in tender.

Removing carefully of aluminium doors, partitions and glass partitions and disconnect all members and fixed to the same position and same opening all as directed by Engineer-in-Charge.

S&F in repair towel rack with lower hanger 610mm long chromium plated complete as specified and as directed (Make : Ess Ess Cat No. AC-708(Chrome) all as specified

sories for water Tank and writing MES No Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re connecting and refixing all connections complete all as directed by the Engg- in- Charge.

All as per Ser Item No 121 above but 25mm bore.

S&F in repair 12 mm thick commercial type face plywood BWR grade type BB fixed with screws/nails to timber frame work all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge.

S&F corner glass shelf incl taking down old one complete as specified and as directed Make:- Ess Ess -S2CS101) or equivalent make specified in tender.

All as per Ser Item No 124 above but 20mm bore.

S&F in repair chromium plated tumbler holder with wall flange in repair all as directed by Engineer-in-Charge (Make : Ess Ess ) Cat No.AC-704 or equivalent make specified in tender.

S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge.(Make: Jaquar -ALD-803AB or equivalent make specified in tender.

S&F in repair CP towel rail 610mm long complete as specified and as directed. (Make : Ess Ess ) Cat No. AC-701 or equivalent make specified in tender.

All as per Ser Item No 124 above but 25mm bore.

All as per Ser Item No 127 above but 2000 ltrs capacity.

All as per Ser Item No 127 above but 500 ltrs capacity.

S&F in repair 15mm bore two in one bib cock with wall flange chromium plated complete as specified and as directed.(Make : Jaguar cat no- FLR-CHR-5041N and ( Ess Ess) Cat No.T-103E(Chrome) or equivalent make specified in tender.

S&F in repair 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to including any sunk or raised moulding including in step design in one, two or three layer below roof or in any desired design. Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including taking down old false ceiling and snap grid and applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces of false ceiling including taking down old false ceiling and snap grid complete all as specified and as directed.

S&F in repair False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 595 mm x 595 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)

S&F in repair PVC wall paper of approved design with CMC powder and a base of 6 mm ply (over 3mm thick wall care putty) on the background fixed with adhesive and a design bit of 38 mm on the ply complete all as specified and as directed .

Dismantling of structural steel work including doors and gates excluding framed trusses etc all as specified.

S&F Brass decorative bracket for fixing curtain rod fixed to wall with screw, nails etc complete all as specified and directed.

S&F in repair 18-19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screws/nails to timber frame work all as specified.

S&F for wall mounted bath room cabinet mirror ( size 14 " x 18 ") all as specified and as directed by Engineer-in-Charge.

S&F stain less brass handle 100 mm long decorative type complete all as specified and directed.

S&F cupboard magnets heavy duty complete all as specified and directed.

S&F brass finish tower bolt 75 mm long, heavy duty complete all as specified and directed.

S&F in repair solid PVC wall lining 5mm thick plain/designed coloured PVC sheet inclusive of solvent cement and fixed at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and direction complete all as specified and directed.

S&F in repair False ceiling 'E' board "Classic", reinforced, designer series, board with HPSC of size 595 mm x 595 mm x 4 mm thick fixed on existing aluminium snap grid to support the boards/files complete all as specified and directed.

S & F 200 mm long Brass Finish anodised barrel tower bolt of extrued section complete all as specified and directed.

All as per Ser Item No 81 above but 150 mm long complete all as specified and directed.

S&F 250 mm long Brass Finish decorative type sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as. Fixed as in repair complete all as specified and directed.

S&F 300 mm long Brass Finish anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specified and directed.

S&F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and directed.

All as per Ser Item No 85 above but 75 mm long complete all as specified and directed.

S&F 150 mm extruded Brass Finish handle fabricated type anodised complete all as specified and directed.

S&F in repair Solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions all as specified and as directed by Engineer-in-Charge.

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and rivets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing etc all as specified including taking down old one.

S&F in repair classic Cylindrical lock made of brass complete all as specified and directed.

Supply and fix pressure booster pump with 1 HP 50-60 HZ,VOLTAGE 220V,single phase, discharge capacity 0-6 m3/hr,25 mm dia delivery pipe(of length 5.00 meter ) pressure switch of dynfos ,pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge.

Cutting holes in brick wall exc. Half brick work but not exc one brick work built in cement mortar for inserting hold fast and making good to dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 typeB1 as required.

Supply and fix pressure booster pump with 0.50 HP 50-60 HZ,VOLTAGE 220V,single phase, discharge capacity 0-3 m3/hr,25 mm dia delivery pipe(of length 5.00 meter ) pressure switch of dynfos ,pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 5.5mm thick looking mirror, any size of over AC building board or commercial ply wood and fixed with PVC/wooden plugs with CP brass screws and cup washer including taking down old one complete all as specified and directed.

M & L preparation of horizontal or vertical surfaces for water proofing treatment with providing 3 mm thick, APP based polymeric membrane weighing minimum 3.0 Kg/Sqm reinforced with polyster non wove fabric (weight not less than 150 gm /Sqm over a coat of blown grade hot bitumen 85/25 @ 1.20 Kg / Sqm, in repair all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads.

Supply only integral water proofing compound (ISI grade only)

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

Taking down shutter and re-fixing in the same opening after necessary repair like easing etc. area exc 1 sqm but not exceeding 2 sqm each completed all as specified and directed.

S&F double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel cover governing pirot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.

S&F Coloured cascade type seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed by Engineer-in-charge.

S&F Coloured (any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed by Engineer-in-charge. MAKE: Parryware, cat no C 8071 or equivalent make specified in tender.

S&F Stainless steel

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F for 2nd class HW, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

M&L 10 mm thick cement plaster on brick or concrete walls in CM 1:6 complete all as directed.

M&L 15 mm thick cement plaster in CM (1:4) on fair faces of brick work incl finished even and smooth without using extra cement.

M&L 5mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as directed.

Repair only to cascade type flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

wire clothe 0.36 mm nominal dia of wire and average width of apertures 1.40 mm and fixed with stain less steel wire staples complete all as specified and directed.

S&F 25 mm dia brass decorative type curtain rod alongwith and supports and rings at a gap of 4"complete all as specified and directed.

S&F in repair Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) brass hinges ,SS, bright finish or electro galvanised, width of flap 40 mm complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions.

S&F 150 mm Extruded brass handles, fabricated type polished decorative type complete all as specified and directed.

S&F brass multi purpose cupboard lock , size 75 mm , 4 lever complete all as specified and directed.

S&F in repair 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair CP 32 mm waste coupling for stainless steel sink complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

Mel for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

S&F cascade type Rimless Single Piece WC floor mounted water closet with flushing cistern with floor trap, PVC seat cover and connecting pipe and Fixing Accessories and Cistern Fittings etc as in repair complete all as specified and as directed. Make- Jaquar ,Cat no. - OPS-WHT-15853S300UF and Equivalent make specified in tender.

Taking down shutter and re-fixing in the same opening after necessary repair like easing etc. area exc 1 sqm but not exceeding 2 sqm each completed all as specified and directed.

M&L for preparation and applying solar reflective bituminous aluminium paint exceeding 10 cm in width or girth over APP membrane @ 0.20 kg/sqm complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85-90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- restive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 35mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.

S&F in repair of 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including suitable float valve fixed with GI pipe complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window / ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made solid PVC Moulded Door Shutter, with particle board core 28mm to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as per specified and as directed.

Supply and fixing factory made uPVC white colour Sliding window Three track, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 no's, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.10 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no

extra payment on this account shall be made.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F powder coated anodised aluminium partition frame, door frame, window frame with one or more rebates including necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar in two or three track window or in fixed type ventilator , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement for both sliding shutter etc with 4 mm thick glass ordinary quality. complete all as specified.(NOTE: Glass and wire mesh shall be paid separately )

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

Taking up GI water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.

S&F in repair CI bends of 100mm dia with ducks foot or heel rest (ISI Marked)

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, in each door, anodised aluminium snap beading screws etc with 4.80 mm thick glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Glass shall be paid separately )

S&F in repair heavy duty Door closer hydrau- locally regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed and fixed including taking down old one all as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, of 100mm internal dia complete all as specified.

One light point or one fan point or bell point controlled by one switch or bell push

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

Providing Skilled labour services for day to day minor repair and maintenance of daily complaints for plumbing and carpentering works including fixing of MES store items for Officers living accn of JSA complex , Single officer Accommodation area at O-12 and C-6 complex and other offices, in one shift per day except on Sunday & holidays by employing 01 Fipe fitter/carpenter to GE (FW) Kolkata and all as specified here -in-above all as specified & directed. Note :- (a) The contractor has to depute 1 no skilled labour for above mentioned job for Zone-II area daily from 8:30 AM to 5:00 PM. (b) All tools & plants required for job to be provided by contractor

M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches, sockets, fan regulators etc for the following [Note: - Modular switch boards shall be measured and paid separately]: -

One light point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent [Note: - Modular switch boards shall be measured and paid separately]

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply only clamp with buckle for hanging ceiling fan including nut and bolts complete set all as specified and directed.

S&F in repair Mortice latch lock with two levers (vertical type), mild steel body and fixed in aluminium door complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes 100mm in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F for bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F in repair CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. For 100mm dia pipe complete all as specified and directed.

S&F in repair 100mm bore cast iron cowls complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket outlet 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed.

S & Fin repair LED Ceiling light fitting 35/36 W recess type as in repair, minimum colour temperature 6500K, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Crompton LCTLSN-36-CDL or equivalent make specified in tender.

Supply only MCB 'C' series single pole and Neural 32 Amps, breaking capacity 10KA, complete all as specified and directed.Make Cat No 408587-95, of Legrand complete all as specified and directed

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Musical Call Bell as per sample approved and directed by Engineer-in-Charge.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Modular type Metal Flush box 8 module complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation.

E/M Portion Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge

All as per Srl. Item No. 33 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 33 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15

cm girth

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S & F Bell , AC, 230 Volts, single pole complete all as specified and directed.

S & F stepped type electronic fan regulator flush type complete all as specified and directed.

Material and labour for concealed point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below: -

M & L for point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC casing & capping terminated in and including PVC block 50 mm deep (sunken) for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent .

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair LED tube light fitting 10 watt, mirror type /mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed.

S & F in repair Recess mounting 1X1 LED Luminaire ceiling light fitting 15 W as in repair, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Havells PLUTO1X1PLR15WLED857S or equivalent make specified in tender.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with 200 amps rated bus bar complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with 200 amps rated bus barcomplete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.