Supply of new 5 Cs Pumps with allied electro mechanical accessories for flood protection work of village Baghot under flood scheme in M.Garh W.S. Mech. Division, Narnaul

Supply, Erection & Commissioning of 5 Cs existing V.T. axial flow pump of 1440 rpm having static lift 15 ft including MS Delivery pipe, bend & support of bend as per site requirement & specification approved by technical committee

Supply, Erection & Commissioning of induction motors of 30 HP Solid Shaft suitable for 5 Cs VT axial flow pumps,22 KW, 1440 RPM, 440/415V voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications .)

Supply, erection and commissioning of LTDB of capacity With the main incomer MCCB of 300 Amp and 3 No outgoing of 125 Amp each. including 02 No fully automatic ATS starter 30 HP with degree of protection IP-54, with suitable size MCCB/MCB/contactors of sufficient capacity and MCB 30 amp for lighting loads and main contactor of sufficient capacities, indicators, relays, voltmeters, ammeters, power factor meter, Push buttons, timers, bus bars, suitable capacitor bank including suitable size capacitor bank with cable and Thimbles, Nut and Bolt lugs etc. suitable for operation of 2 No. Motors of capacity of 30 HP.LTDB will be installed on MS stand 1 feet from ground including all left over items if any as per site requirement and approved by the technical committee.

Supply and laying of LT Armoured PVC Alluminum cable of size 95 sqmm 3.5 core confirming to IS 7098-1995 as per approved make

Supply and laying of LT Armoured PVC Alluminum cable of size 70 sqmm 3 core confirming to IS 7098-1995 as per approved make

Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia made of 6 mm thick MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required).

Providing & fixing by making required size /length at site in pair of MS cross Girder (ISMB) of size 300mmx140mm for foundation of 5 CS VT Axial Flow pump i/c supply, fixing & welding on bottom side of ISMB through out length with MS flat of 140mmx10 mm thick. Both end of ISMB shall be grouted into RCC wall by making arrangement of PCC block of suitable size as per weight of pump set of 5 Cs capacity nut/bolts/washers etc fitting with ISMB member. Including Material & Labour for applying primer coat with metal primer on new steel or iron work including preparation of surface and Material & labour for painting two coats excluding primer coat with ready mixed paint (Epoxy paint) for metallic surface in all shades on new steel or iron work. MAKE: TATA/JINDAL/SAIL/VAIZAG.