Construction of DDL Factory to Chohra road km 3/00 to 8/00 under NABARD RIDF XXXI

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, cutting and trimming of side slopes and level as shown in the drawing and as directed by engineer-In-Charge at site according to the MORD technical specification section 300 and 1600 and transportation of useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour if required. Any loss to the public, private / property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases including carriage of matereials within all leads and lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-In-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing and laying concrete Mechanically mixed and vibrated 1:6:12 (one cement: six sand : twelve graded stone aggregates 40 mm (forty millimetre) nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification section 800, 1200 and 1600 curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

roviding and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement isto four sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar workscomplete for all heights/ depths including the cost of form work as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and laying mechanically mixed and virbrated plain cement concrete in open foundation for all type of road structure using of plain cement concrete grade M-10 (M Ten) nominal mix 1: 3: 6 ( One cement isto Three sand isto Six graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size complete for all heights/ depths including the cost of form work in drain as per drawings and M.O.R.D. technical specification section 800, 900, 1200,1300 and 1600 as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidental. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing weapholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 700 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP2 (Non Pressure-two) of 900 (Nine hundred )milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and erecting "W" metal beam crash barrier comprising of 3 mm comrising 3 mm thick corrugated sheet metal beam rail 70 cm above road / ground level fixed on ISMC Channels series channels vertical post 150 x 75 x 5 mm spaced 200 cm C/C 1.80 mtrs height 1.10 mtrs below ground level all steel parts and fitments to be galvanised by hot clip process all fittings to conform to IS:1367 metal beam rail to be fixed on the vertical post with a spacer of Channel section 150 x 75 x 5 mm , 330 mm long complete as per MORTH clause 810 and as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Construction of granular sub-base 150mm (one hundred fifty milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 401 for grading-I material, as per the entire satisfaction and directions of Engineer-In-Charge. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm ( sixty three millimetre to forty five millimetre) Grading-II 75mm ( seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to one hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.20 cum ( zero point two zero cubic metres) per ten square metres and binding material at the rate of 0.06 cum ( zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. Technical Specification Clause 405. and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III 75mm( seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 405 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer at the rate 1.00 Kg. One point Zero Zero kilogram) per square metre using one part of bitumen emulsion SS-I by mechanical means as per M.O.R.D. technical specifications section 502 as per the entire satisfaction and directions of Engineer – in- Charge including carriage of materials within all leads,lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding .Malkana, toll tax or any other taxes imposed by the Government but excluding GST.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kgs (Zero decimal Two Seven Five kilogram) per square metre on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per MORD Technical Specification section 503.2 as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental . The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with logo as per latest MORD specifications and drawing. Three MS plates of 1.6mm thick top & middle plate duly welded by the MS flat iron frame of 25*25*5 mm size on back edge. The angle iron frame of the lowerr most plate and flat iron plate will welded to 2 No's 75 mm *75 mm of 12 SWG sheet tubes posts duly embeded in cement concrete M-15 grade blocks of 450*450 *600 mm , 600mm below ground level. The top most diamond plate will be welded to middle and printing arrows borders etc. will be painted with ready mix synthetic enamel paint of superior quality on both sides as per drawing caluse 1701 & annexure 1700. including all incidental charges and carriage of all labour and equipments in all leads and lifts through all modes of transportation or as per the direction of Engineer - in Charge.

Providing and erecting direction and place identification retro reflective cautionary mandatory and informatory sign board as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 2mm thick with area not exceeding 0.90 sqm Supported on anmild steel posts duly embeded in cement concrete M-15 grade blocks of 450*450 *600 mm , 600mm below ground level as per drawing caluse 1701 . including all incidental charges and carriage of all labour and equipments in all leads and lifts through all modes of transportation or as per the direction of Engineer - in Charge.

Reinforced cement concrete M-15 (M-fifteen) grade 5th Km (Fifth Kilometre) Stone (Precast) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and technical specification clause 1703 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and technical specification clause 1703 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.including all incidental charges and carriage of all labour and equipments in all leads and lifts through all modes of transportation or as per the direction of Engineer - in Charge. The rate is excluding GST, but including octroi, royality, Malkhana, toll tax, and any other taxes imposed by the Government.

Routine maintenance after completion of construction work including hauling /carriage of all labour equipments and materials to various locatios of site through all mode of transportation in all ieads and lifts to the entire satisfaction of Engineer in charge For 1st Year (Excluding GST)

For 2nd Year (Excluding GST)

For 3rd Year (Excluding GST)

For 4 th Year (Excluding GST)

For 5th Year (Excluding GST)