REPAIR MAINT OF FLOORING ROOF SHEETS CEILING AND OTHER CONNECTED WORKS OF SINGLE MD OFFRS ACCN IN NEW CANTT UNDER GE GANGTOK

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4.0 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

All as item No 2 here-in before but n.exc 1.5 Sqm each.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement plaster/terrezzo cast in situ of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of precast concrete block walling/brick wall built in cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling old PGI/CGI/AC sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed.

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and as directed.

M&L for plain, framed, panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats omplete all as specified and directed.

S&F of flush shutters 30 mm thick, solid core construction, with particle board and plywood faces panels commericial type on both sides complete all as specified and directed.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, ild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020) complete all as pecified and directed.

S&F in repairs of 18 / 19mm thick prelaminatedparticle board , interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to screw to timber frame complete all as specified and directed.

S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed.

All as per item No.20 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete all as specified and as directed.

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and directed.

M&L for 150 mm size aluminium anodised cast type handles.

M&L for 100 mm size mild steel pressed handles, oval types, stove enameled black complete all as specified and directed..

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section.

S&F of 100mm long aluminium anodised,barrel tower bolt of extruded section.

S&F of 100mm size mild steel butt hinges medium weight.

S&F of 75mm size mild steel butt hinges medium weight.

S&F continuous ( piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and directed.

S&F in repairs door closer of aluminium (extruded section) body hydraulically regulated universal type ,suitable for door shutters of 701 to 850 mm in width and of weight between 36kg to 60 kg and fixed.

S&F in repairs floor door stopper of aluminium alloy body and tongue ,anodised,with hard drawn steel spring fixed in floor having overall length 150 mm complete all as specified and directed.

S&F in repairs of vitreous china wash down water closet pedestal pattern white with all fittings fixed as in repairs (excluding flushing cistern and flush pipe) including plastic water closet seat,white closed pattern with flat bottom and cover and MS CP aluminium/ PVC hinging device complete all as specified and directed.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete of complete all as specified and directed.

S&F in repairs for wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets,Indus Basin (white) or equivalent including 32 mm dia waste pipe with or without padestal all as specified and directed.

S&Fin repairs PVC connections 15 mm size with PTMT nuts/brass nuts of length 600 mm complete all as specified and directed.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc complete (overall size 915mmx460mm with bowl size 410mmx330mmx160mm) Make: Nirali/Supreme or equivalent or approved by GE.

S&F in repair 15mm bore bib taps one/two way cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed of

S&F in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore of complete all as specified and directed.

S&F 15 mm bore angular stop cocks fancy type, chromium plated reduce body screwed down high pressure screwed both ends for iron pipe or for union etc as in repair complete all as specified and directed.

S&F in replacement 15mm bore chromium plated brass mixer for mixing hot and cold water for wash basin screwed down for dia iron pipe complete all as specified and directed.

S&F in repair for 15 mm bore concealed stop cock fancy type chromium plated with long shank and cup complete all as specified and directed.

S & F repair CP towel rack, size 600 mm long with lower hanger type complete Make : Jaquar OR equvalent complete all as specified and directed.

Supply and fix in repair designer corner glass shelf 25 x 25 cm with CP Steel frame complete all as specified and directed.

S&F in repairs decorative type 25mm dia curtain rod, Chromium plated with fixing brackets, stops,and complete fitments all as specified and directed by Engr-in-Charge.

Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed of following bore:-

Bore tubing 15mm

Bore tubing 20mm

M&L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following.

15 mm bore

20 mm bore

All as per item No 47.01 here-in-above but fixing only.

All as per item No 47.02 here-in-above but fixing only.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and directed.

M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed/rendering of CM (1:4) as in wall all as specified and directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for Dark/Light shade virtified tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 20mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and directed.

All as per item No 54 here-in-above but in skirting with 8-10 mm thick backing coat in CM ( 1:4) complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in hardstanding/flooring and finishing the surface even and fair etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/path etc (75mm thick) finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.

M&L for factory made chequered cement conc. Tiles 200mm x200mm x 25 mm/ 300 X300 X 25 mm thick set jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 20 mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed .

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC @ of 3% by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only).

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound.

M&L for applying two coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and directed.

M & L for applying two coats of OBD over a coat of primer applied over 1mm thick super fine Birla or altek wall care putty finish including including complete removal of existing treatment and preperation of old/new surfaces preparing the surfaces even and smooth complete all as specifred and diredted.

Material and labour for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing surfaces including scafolding upto 15M ht and preperation of old/new surfaces all as specified and directed.

M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.

Dismantling water tanks exc 250 ltrs to 500 ltrs capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity complete all as specified and directed

Dismantling water tanks exc 500 ltrs to 1000 ltrs capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity complete all as specified and directed

S&F in repairs ball valve brass 20 mm dia high pressure with polythene float and fly nut complete secrewed for iron pipe or brass ferrule etc all as specified.

Taking down eaves gutter and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan, necks etc,including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repair for PVC(SWR) half round 150mm dia with round edges incl all accessories like bend ,T etc complete all as specified and directed.

S&F in repair for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints,fixed to wall/laid under trenches complete all as specified and directed.

S&F in repair for PVC (SWR) bends (Bore of pipe 110mm) any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified and directed.

S&F in repair for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

S&F in repair for 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

S&F in repair for 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F in repair for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

S&F in repair for PVC(SWR) 50mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee all as specified and directed.

M&L in repairs for PVC floor/Nahani trap with steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair complete all as specified and as directed.

S&F in repairs grating 100 mm dia with hole of PTMT/CP ( medium weight 25 gms) complete all as specified and directed.

S&F of G I steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed..

All as per item No 86 above but fixed in repairs complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws/L type or J hooks complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws /L type or J hooks complete all as specified and directed.

S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 all as specified and directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete.

S&F 5-6mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed with hidden screws incl steel/wooden frame work complete all as specified and as directed.

S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.30mm thick, cross tee shall be 24mm x 23mmx0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.

S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595x595 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

M&L Plywood, grade BWR, type BB, 6 mm thick fixed with nails to timber frame work as in wall/ceiling etc complete all as specified and directed.

Dismantling timber as in fillets, rails etc under 40 sqcm in section complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section and in any position in section complete all as specified and as directed.

M&L 2nd class hard wood as in timber scantling ,clean sawn, and fixed unframed work etc complete all as specified and directed.

M&L for 2nd class hard wood plain fillets,square,rectangular, or triangular in section clean sawn, secured with nails, cross sectional area exc 03 sqcm & n.exc 6 sq.cm in section complete all as specified and directed..

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed.

M&L PCC type D-2 1:4:8 using 40 mm graded stone aggregates on in foundation, filling and mass concrete complete all as specified and directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed.

M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick in rough finished surfaces complete all as specified and directed.

M &L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Slabs supported on walls including necessary form work complete all as specified & as directed. NOTE : Re-inforcement shall be measured and paid separately.

M&L for pre cast cement concrete hollow block masonery exc 10cm in width and setting in CM 1:6 (Type 1:3:6 using 16mm graded aggregate)

Taking down carefully old aluminium anodised door frame/door shutter fixed type window complete and refixing it after repairing of door frame/door shutter, pintal hinges including removing and refixing of door closer incl all hinges and all fittings, glass, ACP sheet, pre laminated particle board complete all as specified and directed.

S&F in repairs for aluminium anodised, aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F in repairs aluminum door shutters , aluminum section weighing 0.55 Kg/m including necessary joining cleats, galzing clips, rubber neoprene packing, handles 02 Nos in each door hinges anodised aluminium snap beading screws etc. Complete all as specified and directed.

All as per items No 113 above but ventilators complete all as specified and directed.

M/S S. S CHETTRI AND SONS

M/S ANIL KUMAR THAKUR

KAMLESH ENTERPRISE

RAAJ BANGAR

SANJAY KAUSHIK

KARMA SHERPA

KARMA TSETEN BHUTIA

DHARMINDER SINGH

M/S MANOJ VERMA

MAHENDRA KHAWAS