ADDN/ ALTN TO EXISTING AFNET STORE ROOM AT BUILDING NO. P-178 AND PROVN OF ISOLATION TRANSFORMERS IN SRE, OMC, GIC, LOGISTIC SITE AND PROVN OF CERTAIN REVENUE WORKS AT AIRFORCE STATION TAMBARAM

Amount

B/R PORTION :

M&L Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified and as directed

M&L Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed

S&F Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

All as per Sl.item No.03 above but in skirting/ Dado vertical surfaces all as specified and as directed.

M&L Rendering 10mm thick in cement mortar 1:4 as in backing coat of skirting/dado etc complete all as specified and as direccted

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

Taking down shutter of any description exc 2 sqm each and refixing in same opening after making necessary cutting for easing etc. complete all as specified and as directed

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing fair and even complete all as specified and as directed

M&L Complete removal of existing treatment of walls and applying 3mm thick wall care putty complete all as specified and directed

M&L Preparation of new surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L Preparation of old surfaces of wall and applying one coat of oil bound distember on walls complete all as specified and as directed

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

M&L Complete removal of existing treatment of ceiling and applying 3mm thick wall care putty complete all as specified and directed

M&L Preparation of new surfaces of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc.1.5 sqm and not exc 4 sqm each complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc.1.5 sqm each complete all as specified and directed

S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed second class hardwood complete all as specified and as directed

S&F Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including vision panels or peepholes, square or rectangular including lipping for fixing magic eye and the like etc., complete all as specified and as directed

S&F Glazed and skeleton shutters 35mm thick, using second class hardwood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed

S&F Tinted sheet glass 4mm thick,ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and as directed

S&F Magic eye, brass, wide angle fixed in door comple all as directed

M&L Preparation of new wooden surfaces and applying one coat of primer and two coats of synthetic enamel paint complete all as specified and as directed

S&F Aluminium anodised,150mm long barrel tower bolts of extruded section and fixed

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Floor door stopper size, 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section) body and fixed complete all as specified and as directed

S&F Expanded metal not exc 4.00 Kg/Sqm, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4, complete all as specified and as directed

M&L RCC type A1,1:1.5:3 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed

S&F formwork to soffits of suspended slabs (flat/curved) such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, one brick wall thick in honey combing walls ,built in CM 1:4 complete all as specified and as directed

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including screed bed in CM 1:6, 20mm thick complete all as specified and directed

Rounding to edges of granite stone etc. slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

S&F Steel almirah large size with shelves fixed permanently on floor including provision of nut, bolts, channels, welding and the like etc., complete all as specified and as directed at site. Drg No. FD-351/1031/67/243

M&L Rendering 15mm thick in CM 1:6 on fair faces of brickwork /stone masonry or concrete surfaces finishing fair and even complete all as specified and directed

M&L Plain cement concrete type D- 2, 1:4:8 using 40mm graded stone aggregate, 150mm thickness as in sub floor complete all as specified and as directed

S&F Powder coated Aluminium anodised window sliding shutter without sash bars, aluminium section 45.2 x 35 x 1.30mm (for frame, Jindal section No. 20664) and 37.5 x 15 x 1.60mm (for shutter, Jindal section No. 20597) of make JINDAL or equivalent from list of makes mentioned here in after including rubber packing anodised aluminium snap beading etc, with 4mm thick plain glass including necessary locking arrangement and all fittings such as hinges, handles, stays etc, complete all as specified and as directed. Note :- If Aluminium section size specified above is not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S&F Powder coated Aluminium anodised grills (Pattern DG-104) bull nosing and polishing of edges 10mm thick with weight not less than 2.5 Kg/sqm for windows, ventilators etc., including 'F' section of size 23.4 x 15.3 x 1.4mm thick, joining cleats etc., complete all as specified and as directed

M&L Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finished fair and even complete all as specified

M&L Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

M&L Preparation of new surfaces of walls and applying two coat of oil bound distember over a coat of primer including provn of 3mm thick wall care putty on walls complete all as specified and directed

M&L Complete removal of existing treatment of external walls and applying one coat of primer and two coats of cement based paint complete all as specified and directed

M&L Preparation of new plastered surfaces of walls and applying one coat of primer and two coats of cement based paint complete all as specified and directed

M&L Rendering 10mm thick in CM 1:4 with water proofing compound @ 3% by weight of cement over RCC slab, parapet and the like etc. finishing fair and even complete all as specified and as directed (Note: WPC will be measured and paid sepertely)

Removing existing water proofing treatment any type including plastering, PCC, APP membrane etc., including removal of debris, old APP membrane etc.to outside MOD land and provn of new roof treatment over plastered RCC roof slab/parapet after cleaning the surfaces by removing dust, dirt etc., by applying water proofing treatment on horizantal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm including minimum 10cm side lap and 15cm end lap with torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane , finally finished with solar reflective bituminous aluminium paint @ 0.10 Kg.Sqm over the membrane etc., complete all as per manufacturers instruction and as directed (Note: Plastering will be measured and paid seperately)

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and directed

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out hard/dense soil all as specified and as directed.

M&L Plain cement concrete, 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed

M&L Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L Plain cement concrete, 75mm thickness, type D2, 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified and as directed

M&L Plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregates as in floor finishes, 25mm thickness complete all as specified and as directed

M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L Joint free Glazed coloured ceramic tiles in vertical surface area of each tiles exc 0.06 but not exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed

M&L Reinforced cement concrete 1:1.5:3 , type A1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.fair finished flat surfaces all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide , fair finished flat surfaces complete all as specified and as directed

S&F TMT steel bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

All as per Sl.item No. 64 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L Applying water proofing treatment on horizantal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm including minimum 10cm side lap and 15cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.10 Kg.Sqm over plastered RCC roof slab/parapet including rendering 10mm thick cement mortar 1:4 with WPC after cleaning the surfaces by removing dust, dirt etc., complete all as per manufacturers instruction and as directed

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Powder coated aluminium window and ventilator shutters, side hung type wthout sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed

S&F Frosted glass 5.5mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specifeid and directed

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame at site as per specification & drawing complete all as specified and directed

S&F Aluminium anodised,200mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

S&F PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,flush pipe 600mm long, grating and Union for discharge pipe etc complete all as specified and as directed

S &F vitreous china wash basins angle back,size 600x480mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene fush pipe, PVC connections 15mm size with PTMT nuts of length 600 mm, waste pipe screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

S&F Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F Stop valves 15mm bore, cast copper alloy,fancy type, chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F Tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F Soap dish, vitreous China white, approximate size 160x 160x 90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 15mm bore all as specified and as directed

S&F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore all as specified and as directed

M/L 150mm dia salt glazed stoneware drain pipes laid in trenches and joints as specified complete all as specified and as directed

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 using 40mm graded stone aggregate for 150mm dia pipes complete all as specified and as directed

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching for 150mm dia as required all as specified and as directed

S&F rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified ans as directed

S&F 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

S&F PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as speccified and as directed

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S&F PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed

S&F PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S&F PVC (SWR) branch piece,75mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S& F PVC (SWR) junction single,(Single T) 110mm bore with access door equal or unequal complete all as specified and as directed

S& F PVC (SWR) junction single,(Single T) 75mm bore with access door equal or unequal complete all as specified and as directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed

M&L Plain cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in coping, benching and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed

M&L Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed

Demolition of plain cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L Plain cement concrete, 75mm thickness, type C2, 1:3:6 using 40mm graded stone aggregate as in plinth protection including necessary formwork finishing even and smooth without using extra cement complete all as specified and as directed

Supply only Integral water proofing compound

M&L Plain cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregae as in damp proof course to horizontal or vertical surfaces including WPC etc., 25mm thickness complete all as specified and as directed

M&L Reinforced cement concrete , type A1,1:1.5:3 , using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M&L Reinforced cement concrete type A1, 1:1.5:3 , using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L Reinforced cement concrete type A1, 1:1.5:3 , using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces complete all as specified and as directed

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finished surfaces complete all as specified and as directed

S&F powder coated Aluminium anodised doors standard JINDAL or equivalent section of size 63.5 x 38 x 1.6mm for frame and section size 47.62 x 44.45 x 1.18mm for vertical style section size 46.72 x 44.45 x 1.4mm for top and central rail section size size 99.25 x 44.25 x 1.16mm for bottom rail, section size 19 x 17.3 x 0.80mm for glazing clip for shutter including faabrication to required size and partly panelled with 12mm thick both side prelaminated particle board and partly glazed with 5mm thick dark tinted glass including fitting etc including pivot, handle, mortise lock heavy duty complete all as specified and as directed Make: Jindal/ Hindalco Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

M&L Antitermite treatment ,treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed

M&L Antitermite treatment ,treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed

M&L Antitermite treatment ,treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed

M&L Cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L Loose filling with broken bricks,size of gauge 80 to 150 mm in soakage pits, soakage wells and the like etc., complete all as specified and as directed

Removing excavated material exc. 250m and not exc 500m depositing where directed complete all as specified and directed

E/M PORTION :

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as directed and specified.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed by Engr-in-Charge.

(a) One light/fan point controlled by one switch.

(b) One socket point on Independent board

(c) One socket outlet 5 Amps 5 Pin on same board

All as per item No 126 above but with 2.5 sqmm including earth continuity coductor 2.5 sqmm for power point 15 amps

Switch flush type, 5 amps 240 volts single pole one way all as directed and specified.

Ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts all as directed and specified.

Supply and fix socket outlet 2/3 pin 5 amps 240 volts flush type all as directed and specified.

S&F Switch socket combination 2 in 1 multipurpose 5/15 amps 240 volts universal type all as directed and specified.

S&F LED fitting 4 feet long with light source 18 Watt general purpose and wall mounted led Batten with polycarbonate LED channel & integrated electrinic driver. (Make - Bajaj Cat Part No-BCLSB 18 WH) or equivallent) all as directed and specified.

M&L Sub main wiring 2x6.0 Sqmm single core FRLS PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through with 20mm PVC conduit and conduit accessories fixed surface/concealed with suitable clamps/saddles including one run of 6.0 sqmm FRLS PVC insulated copper cable for continuous earth conductor connected to common earth dolly all as specified and as directed.

Supply & fixing of Sheet metal enclosure with distribution board Double Door 230 volts SPN 8 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections all as specified and as directed.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed

S & F in replacement of MCB's 6-32 amps, 10 KA , SP 240V B Curve including connection complete all as specified and as directed.

S & F Isolator SPN 40 amps, 10 KA , 240V B Curve including connection complete all as specified and as directed.

Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 4mm GI wire means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion

Supply and fix wall mounted fan 400 mm sweep along with speed control complete with all accessories incl mounting fabricated MS flat and anchor fastner nuts and bolts all as per design given by Engr-in-Charge all as directed.

Supply and installation of isolation transformer of capacity 5 KVA, Single phase, 230 V Copper wound including provn and connection with suitable size of copper wire, testing on completion complete all as specified and directed. (Make : Volt On or equivalent as approved)

Supply and installation of isolation transformer of capacity 15 KVA, Three phase, 415 V Copper wound including provn and connection with suitable size of copper wire, testing on completion complete all as specified and directed. (Make : Volt On or equivalent as approved)

Supply and installation of isolation transformer of capacity 20 KVA,Three phase, 415 V Copper wound including provn and connection with suitable size of copper wire, testing on completion complete all as specified and directed. (Make : Volt On or equivalent as approved)

Supply and install hi wall split units indoor/outdoor of capacity 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity including outdoor and indoor fixing materials like clampset and fastner bolts, testing on completion complete all as specified and directed.

Supply, install, connecting, testing and commissioning of voltage stabiliser for automatic operation of capacity 5KVA naturally air cooled indoor type, single phase, designed for input variation between 170 V to 250 V with output voltage stabilized at 230-250V AC complete all spedifide and directed.

Supply and fix wall mounted LED 20 Watt batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electonic driver as per cat part No.ENDURALINEARNEOBS20WLED865SPCWH of Havells make or equivalent in Phips/Bajaj all as specified and as directed.

Supply and fix wall mounted LED 10 Watt batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electonic driver as per cat part No.ENDURALINEARNEOBS10WLED865SPCWH of Havells make or equivalent in Phips/Bajaj all as specified and as directed.

Supply and fix heavy duty Exhaust fan 300 mm sweep 900 RPM, Turbo force SP with louver shutter and connecting including making holes for Exhaust Fan and provision of 3 core cable of 0 .5 sqmm from ceiling rose to fan all as specified and as directed.

S&F MCB distribution board, double door, made of 1.2 mm thick special grade CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, fixed in switch boards/wall at various places of capacity 415 volts 4 way TPN MCB DB. DBS shall conform to IS 38 protection all as specified and as directed.

Circuit/Sub main wiring two run of 2.5 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 2.5 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly all as specified and as directed.

S & F 1200 mm sweep ceiling fan complete with fixing arrangements complete with all connection all as specified and directed.

Supply and lay bricks sub class 'B' laid across the trenches for protection of UG cable all as specified and directed.

Supply & Lay in trenches fixed on wall (or) passing through pipes/in floors connecting up testing and commissioning of PVC insulated armoured LT UG electric cable with aluminium conductor 1100V grade of size 16 sqmm 2 core all as specified and directed.

M & L GI tubing 40mm dia light grade laid in trenches or fixed on pole with suitable cllamps and jointing complete all as specified and directed.

S&F MCB distribution board, double door, made of 1.2 mm thick special grade CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, fixed in switch boards/wall at various places of capacity 240 volts 4 way MCB, DB,DBS shall conform to IS 38 protection all as specified and as directed.

Banyan Engineers and Contractors

kcs builders