REPAIR TO FLOORING TILING, SANITARY FITTING, JOINERY WORKS, PVC DOORS, KITCHEN CUP BOARD, DRAPERY RODS AND MISC WORKS IN ZONE-I UNDER AGE B/R-III OF GE(S) MEERUT CANTT

Amount

Taking down of chowkats or frame with shutters (without taking off shutters from the frames) n exc. 1.50 Sqm each complete all as specified & directed.

Hacking out old broken glass (any thickness, quality, size or description) from wooden or steel frames and preparing frames for reglazing complete all as specified & directed.

Dismantling of floor tiling including cement mortar bedding and removing the rubbish off the premises complete all as specified & directed.

Taking down / removal of wall tiling, terrazzo topping, plaster and kota stone from vertical surface any type incl cement mortar bedding upto brick surface for new tile work and removing rubbish off the premises complete all as specified & directed.

Taking down cement plaster of any description from brick wall or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified

Material & labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as sub base finished surface fair and even complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B0 (using 20 mm graded stone aggregate) as in floor surfaces finished even smooth using extra cement complete all as specified and directed.

Material and labour for rendering, 15 mm thick on any surfaces of brick work or concrete surfaces in cement mortar (1:6), surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on concrete surface as in ceiling of chajjas, facia etc in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified & directed.

Materials & labour for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified & directed.

M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick JK/Birla wall care putty complete all as specified and directed

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, over a coat of cement primer complete all as specified and directed

M&L for Solid PVC door frame of size 50mmx47mm made out of 5mm PVC plain colour sheet reinforced with MS square tube suitable for solid PVC door suppling & fixing in opening as per specification & drawing shown on page No 160 of SSR Part-II 2010, complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for to rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to getter with solvent cement, in the frame at site as per specification and drawing on Srl Page No 156 of SSR Part-II 2010, complete all as specified and directed.

Supply and fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in steel widows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12x5mm complete all as specified and as directed. (Note : Removal of steel window shutter incl refixing in same location where necessary will also included in quoted rate.

S&F 3mm thick sheet glass ordinary quality n.exc .50 Sqm each panes and glazing with oil putty and glazing dips or fixed with wooden beads in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in doors and windows complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade wih grey cement & pigment laid over and including 50mm thick stone dust cushioning bed complete all as specified and directed

M&L plain cement concrete type D2 (1:4:8) using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material & labour for 12mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balance with white colour lamination fixed with screws to timber frame work such as in kitchen/bath cabinets etc. including 1mm thick PVC lipping fixed in repair including taking down of old unsv board , fitting and fixtures etc complete all as specified and directed.

S&F continuous (piano) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

Supply and Fix 40mm dia cupboard knobs of brass, polished, fixed with nut, screw and washer complete all as specified and directed.

Material and Labour for 18/19 mm thick particle board grade commercial water proof plywood fixed with screws to timber frame work for cabinet, both sides covered with 0.80mm thick decorative laminates, "Mica" type 1 of surface finished, colour and pattern as approved fixed with approved adhesive as per manufacturer's instructions including taking down old unsv boarding of any descriptions complete all as specified and directed.

Supply and fix in repair auto hinges for cabinet case complete all as specified and directed.

Supply and fixin in repair stainless steel plain basket of size 42cmx50cmx15cm complete all as specified and directed.

Supply and fix in repair stainless steel partition of size 42cmx50cmx15cm complete all as specified and directed.

Supply and fix in repair stainless steel cutlery of size 42cmx50cmx15cm complete all as specified and directed.

Supply and fix in repair stainless steel grain trolly with stand of size 52cmx42cmx25cm complete all as specified and directed.

Supply and fix in repair stainless steel cup of soucer, trolly of size 42cmx50cmx10cm complete all as specified and directed.

Supply and fix in repair stainless steel plate basket of size 42cmx50cmx15cm complete all as specified and directed.

Supply and fix in repair 50cm long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed.

Supply and fix in repair 0.80mm thick laminated sheet (Mica) paste on board/plywood with glue adhesive complete all as specified and directed.

Supply and fix in repair 150mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

S&F 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S & F 150mm long extruded aluminium anodised handles fabricated type complete all as specified and directed.

S&F aluminium anodised barrel Tower bolt of 200mm long complete all as specified and directed.

Supply & fix butt hinges medium weight cold rolled mild steel 100mm size , ISI marked all as specified and directed.

Supply and fix 200 mm long 16mm aluminium anodised, sliding door bolts, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

Supply & fix in repair 25mm dia stainless steel curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

S&F in repairs 25mm dia PVC sheet coated metalic fancy type curtain rod incl brackets and fancy type end knobs & rings etc compelte all as specified and directed.

Dismantling of fiber cement Asbestos cement (corrugated semi corrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling of wooden fillet,rails, post, rafter, purlin etc unde 40 Sqcm in section unframed work complete all as specified and directed.

Dismantling timber scatling 40 Sqm and over in section in any postion unframed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

M&L fibre sheet cement 6mm thick corrugated or semi corrugated fixed in roofs with J or L hooks including bitumen washer complete all as specified and directed.

M&L fibre sheet cement 6mm thick two piece adjustable serrated ridge for corrugaed or semi corrugated sheets fixed in roofs with J or L hooks and bitumen washer complete all as specified and directed.

S&F 0.50 mm (total thickness) pre painted galvalume aluminium zinc coating (as specified in clause 11.3 of SSR Part-I 2009) GI based corrugated steel sheet any colour in roof covering having tensile strenght of 550Mpa fixed with self tapping screws neoprene and EPDM washers complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.

Dismantling wall/ceiling boards (fibre insulated) of any description and any thickness including cover fillets complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building oard (1200mmx1200mm or 1200mmx1800mm) fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Material and labour for provision of Aluminum anodized frame work (snap grid) as in false ceiling consisting of followings and all as directed:-i) Aluminum sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25mm x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 mm thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified.

Supply and Fix 4 mm thick Board of size 60cm x 60cm as in ceiling fixed to aluminium snap grid with screws as per manufacturer’s instructions complete all as specified and directed.

Material and labour in repair 2mm thick fiber glass reinforced transulant plain sheet fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Supply and fix structural steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st - 240 complete all as specified and directed.

Supply and fix mild steel work for roof trusses ( framed ) , purlin, rafter , fastening , distance pieces, cleats etc (incluidng fixing independently vertical post) complete all as specified and directed.

Supply and fix of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete all as specified and directed.

Supply and fix joist, channel, angle or tee sections fixed independently, without connecting plates complete all as specified and directed.

Material and Labour for mild steel framed work as in frame for sun shade at any height up to double storey incl all necessary scaffolding and cement work required for fixing of frame to wall complete all as specified and directed.

S&F clean sawn second class as in scantling complete all as specified and directed.

M&L for 5mm prelam semi solid PVC sheet in strips & channel feathred at the edge for fixing on semi solid PVC wall linning, insulated wall lining and semi solid PVC partitions inclusive of solvent cement complete all as specified and directed.

M &L for glazed ceramic coloured tiles (premium quality) of size 450X300X7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for non skid glazed ceramic coloured tiles (premium quality) of size 400X400X7-8mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L for Vitrified Light shade tiles 10 mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floor laid over and ioncluding 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slury and joints filled with white cement mixed with colour pigment to match complete all as specified and directed

M & L for Vitrified Light shade tiles 10mm thick (Square/rectangular) polished on vertical surface as in skirting/dado laid over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and joints filled with white cement and pigment to match with complete all as spfd and directed.

M&L for skirting with 400x100x7-8 mm thick glazed ceramic coloured tiles set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm screeding in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, of size 300 x 200 x 6 to 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 10 mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of edges and drilling hole for gas pipe etc complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 72.00 above but as in skirting/dado over and including 15mm rendering in CM (1:6) complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls with necessary fittings such as clamp made out of flat iron of size 25mmx3mm including nuts and bolts etc complete all as specified & directed.

S&F in repair PVC (SWR) bends of 110 mm bore dia complete all as specified & directed.

S&F in repair 110mm bore PVC (SWR) Junction single, (Single T) Equal or unequal complete all as specified and directed.

Supply & fix in repairs 75 mm bore PVC (SWR) pipe in any length fixed to walls with clamps or laid in floors etc. complete all as specified and directed.

Supply & fix in repairs PVC bends, any radius suitable for 75 mm dia PVC pipes complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) Junction single, (Single T) Equal or unequal complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius in half thick brick wall built in CM 1:4 complete all as specified and directed.

Supply & fixing in repairs vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe), including connections to trap, and to flush pipe, anti -syphonage pipe, etc. complete including making good to floor to match the existing complete all as specified & directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor to match the existing complete all as specified & directed.

Supply and fix in repair of PVC low level flushing cistern 10 Ltr capacity white with inlet, ball valve, float and handle incl brackets incl 32 mm dia PVC flush pipe for low level cistern complete all as specified and directed.

Supply and fix in repair rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling existing PVC water storage tank complete all as specified and directed.

Supply & fixing in repair PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

Supply and fix in repair 20 mm bore, PVC ball valves, high pressure with polyethylene float and fly nut, including epoxy coated aluminium rod, screwed fixed to iron pipe 15/20 mm bore complete all as specified and directed. ( Min Wt:- 210 Gms) Make: Prayag/Pearl.

S&Fin repair stop valve cast copper alloy high pressure fancy type chromium plated with long shank and cup (concealed type) 15mm dia complete all as specified and directed.

Supply & fixing in repair brass chromium plated shower roses125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

Supply and fixed in repair angle valve, 15mm dia, cast copper alloy CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supply & fixing in repair long body bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore dia of pipe complete all as specified & directed.

S&F in repair 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.

Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Supply and fixing in repair PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repairs 20 mm Gun metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Material & labour for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Supply & fixing in repair steel CP grating 100/125 mm dia incl waste hole where required at site complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore and removing from site complete all as specified & directed.

Taking up or down steel tubing and connections 20 mm bore and removing from site complete all as specified & directed.

Cutting chases in brick walls incl pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, concealed water tubing , and making good to match the existing cutting not exc 10 cm girth complete all as specified & directed.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified & directed.

S&F 20 mm bore tubes medium grade, galvanized with all fittings and fixed to walls , ceiling or laid in floors complete all as specified & directed.

Supply and fix in repair vitreous china, wash hand basin, white, flat back, size 550x400mm cutting for and pining in ends of brackets PTMT waste fitting complete all as specified and directed. Make Cera/Hindware/Parryware

Supply and fix in repair 0.80mm thick stainless steel plate rack of size 750mm x 600mm includifng shelves rod for putting plates etc complete all as specified and directed.

Supply and fix in repair, sink with drain board made of stainless steel 1.00mm thick for kitchen with plug, washer, chromium plated brass waste fitting and PVC waste pipe including bedding in cement mortar on to dwarf wall or fixing on cantilever brackets and connecting union to pipes, overall size 915mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.

Supply and fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x250mm chromium plated steel brackets complete all as specified and directed.

Supply and fix in repair plastic seat cover water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply & fix in repair chromium plated ABS jet health fauset with 1.00m long Easy flex PVC tube & wall hook complete all as specified and directed.

Supply & fix in repair 15mm bore single lever centre hole basin mixture of superior quality with capstan heads, chromium plated cast copper alloy with hot and cold arrangements with long shank and cup, screws for iron pipe complete all as specified and directed.

Supply & fixing in repair brass chromium plated wall mixer (three in one) with provision for both hand shower and overhead shower complete with long bend ,connecting legs ,wall flange including telephonic shower round shape single flow, face plate stainless steel & ABS body in chrome finish and with easy flex tube in chrome finish 1.50 m long with nuts complete all as specified & directed.

Supply only glass dividing strips 38mm wide and 3 mm thick all as specified and directed.

Material & labour for cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) as in coping, benching, cills, lintels, band, filling around hold fast, filling in chowkats etc complete all as specified and directed.

Madan Lal Jain and Sons

Tayal Builders

Punit Jain

Shivam Construction Co.

jitendra AND Co

Jain Engineering Works

SHAKTI CONSTRUCTION CO

M/S AMAR ELEKTRO CENTRE

P K ASSOCIATES

Rajneesh Jain

m/s gupta construction

Anil Kumar Gupta