Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹20.0 L+₹98,179.80 (5.17%)Accepted-Finance | L2 | Accepted-Finance Accepted | |
| 3 | Rejected-Technical | - | Rejected-Technical Original EMD not submitted |
Tender Value
₹16.3 L
EMD Value
₹32,503
Closing Date
24 Aug 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Office of the Executive Engineer CD APWD Campbell Bay
Construction of Sub Division Office for Sub Division No II under APWD, Campbell Bay. Sub Work Development of Site.
2023_APWD_11329_1
DB-TN/CD/CB/2023-24/ 1541
Open Tender
Civil Works - Others
Item Rate
90 days
Executive Engineer CD Campbell Bay
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹32,503
28 Aug 2023
18 Aug 2023
25 Aug 2023
18 Aug 2023
24 Aug 2023
18 Aug 2023
Amount
CONCRETE WORK
Centering and shuttering including strutting, propping etc. and removal of form work for :
Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
REINFORCED CEMENT CONCRETE
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :
1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
STEEL WORK
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
Providing and fixing bolts including nuts and washers complete.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
ROOFING
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
FINISHING
12 mm cement plaster finished with a floating coat of neat cement of mix :
1:4 (1 cement: 4 fine sand)
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Non Schedule Items
Providing and laying hollow cement block walling upto floor level 200 mm thick consisting of using hollow block of size 400x200x200 mm of mix 1:3:6(1 Cement : 3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) having a crushing strength of 3.50N/mm at 28 days as per IS 2185(Part-I)1979 laid in cement Mortar 1:6 (1 Cement : 6 Coarse sand).
Providing and laying Polythylene septic tank for 10-15 flushing/day made of polythylene i.e is a single moulding with 3 chambers and 3 manholes, the high wal/thickness of septic tank should withatand load and pressure of the earth to a great extent, fullfilling the technical specification of Type-I united Polytylene septic tank or equivalent capacity of flushing per day should be of 10-15,diameter of tank 750mm,length 2500mm, minimum thickess 10mm, number of chamber 2, number of manhole 2 of size 300mm dia and air vent pipe of 50mm dia etc all complete laid as per the direction of the Engineer-in-charge. (Eartwork in excavation,cement concrete bed and vent pipe shall be paid separately).
Constructing soak pit 1.20x1.20x1.20m filled with building rubbish,deolished concrete waste materials including UPVC pipe 110mm dia and1.20m long complete as per standard design
Providing and fixing PVC Pipe as Weep Hole as Per direction of engineer in charge. With 50 mm dia PVC Pipe
Providing and fixing in position facia and eaves board with 18mm thick wooden plastic compound(WPC) board 30 cm wide sheet including fixing with nuts and bolts etc complete.
Constructing cement concrete manhole 15cm hick wall with 1:3:6(1 cement:3 Coarse sand : 6 Graded stone aggregate 20mm nominal size)RCC top slab 10cm thick 1:1.5:3 (1 cement : 1.5 Coarse sand : 3 Graded stone aggregate 20 mm nominal size) 15 cm thick foundation concrete 1:4:8 ( 1 cement : 4 Coarse sand : 8 Graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 Coarse sand finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 Cement :2 Coarse sand : 4 graded stone aggregate 20mm nominal size) finished with floating coat of neat cement including earthwork excavation complete or as per the direction of Engineer-in-charge. a) Inside 90x80 cm 45 cm deep including C.I cover with frame (light duty) 455x610mm internal dimension,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg).
Providing and fixing pre-painted galvalume (PPGL) steel profile sheet az-150 of brand TATA Bluescope steel, EVerest Industries Ltd, JSW steel ltd; Jindal India Ltd, or equivalent (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with aluminium zinc coating 150gms per sqm as per IS:277,in 240 mpa steel grade,5-7 micron epoxy primer on both side of the sheet and polyster top coat 15-18 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge.The steel shall be fixed using self drillling/self tapping aluminium screws (Xylan) of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,raffers, trusses and including cutting to size and shape wherever required.
Providing and fixing pre-painted (PPGL) steel profile sheet AZ150 of brand TATA Bluescope steel, Everest Industries Ltd, JSW steel Ltd., Jindal India Ltd., or equivalent roofing accesoles 0.50mm (+o.o5%) total coated thickness,zinc coating 120gms per sq as per IS:277, in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the steel and polyster top coat 15-28 microns using self drilling/self tapping screws complete. a) Ridges plain (500-600mm).
Providing and fixing soil, waste and vent UPVC pipe conforming to HSN code 3917 single socket type-B, including solvent joint.
a) 110mm diameter
b) 75mm diameter
Providing and fixing UPVC moulded fittings/accessories conforming to HSN Code 3917 including joint with solvent.
a) Plain bend of required degree 110mm
b) Door bend of required degree 110mm
c) Terminal guard 75 mm dia
D JAYARAMAN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .