Khagaria Water Supply scheme under AMRUT 2.0

Financial Sheet

Name of work Khagaria Water Supply Scheme under AMRUT 2.0

Address of Bidder

Part - A (SOR Items), BOQ attached with the Bid Document Amount (In Rs.)

1 Khagaria Water Supply Scheme under AMRUT 2.0 1461264750

Quoted rate in Percentage (In Figure)

Quoted rate in Percentage (In Words)

ABOVE / BELOW / ESTIMATED COST

Total Quoted Amount after Above/Below (Part A)

Part - B (Non- Schedule Items) Unit Qty Rate Quoted Amount (In Rs.)

1 Detailed Survey, Engineering Design and Preparation of Drawings for Khagaria Water Supply Scheme Job 1

2 Scada System Job 1

3 Supply,installation,testing and commissioning of Vertical turbine pump sets with allied equipment as under-

Supplying ,erecting and commissioning of Vertical turbine pump sets (make: Kirloskar/WPIL/ Mather & Platt) as per IS 1710, capable of discharging 9794 LPM against a head of 43 m, consisting of bowl assemblies, bronze impellers, column assembly ,stainless steel pump shaft,line shaft,etc.with all accessories coupled with energy efficient (IE3) squirrel cage induction motor confirming to IS:325 and IS:12615, having 10% more BHP than that of pump, operating on 1450rpm, 415V, 3 PH, 50 HZ [make: Kirloskar/ABB/BHEL/Marathon/CGL] all complete with required size of sluice valve and non-return valve, standard fitting, strainers, foot valve, reducer, pressure gauge, MS delivery & Suction pipe, common header,nuts & bolts, packings, fitting & fixing,labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:-Contractor will have to check the design of pump & motor and get it approved by the Department

Therefore (3W +2S) Pumps Have been taken (Discharge-9794 LPM,Head- 43 M 140 HP.) Set 5

4 Main Power Distribution Panel cum MCP for Raw Water to be installed at Intake Well Pump House:- Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable gage and size, dust and vermin proof and painted consisting of proper power distribution 4 pole 800A copper busbar, 1 no. incoming feeder of 1200A MCCB, 4 nos. outgoing feeder of 400A for pumps sets,1 no. 400A MCCB outgoing Spare feeder, 2 no. 32A MCB feeder for lighting and utility, switch disconnected isolator (TPN) rated (800A-415V), selector switches,Volt-meters, Ampere-meters, indicator lamps etc.All complete with internal wiring, protection units/relays and capacitor banks of proper KVAR for Power Factor control, etc.all complete as per site requirement, Instruction of E/I.and IE rules Job 1

5 Earthing: making earthing as per IE Rule for each motors & stabilizer. Job 2

6 Cost of taking Power connection with metering from Bihar State Electricity Department, etc. all complete. Job 1

7 Supplying, installation & commissioning of internal and external lighting with Led lamps with all other materials, Lightening arrestor for Pump house, fire fighting system, first aid, rubber matting, etc. Job 1

8 Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-

Providing , erecting and commissioning of Multi stage/HSC Centrifugal pump (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for discharging -6654 LPM against a head of 65 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615, having 10% more BHP than that of pump, operating on 1450rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB/ BHEL/CGL/ Marathon] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:-Contractor will have to check the design of pump & motor and get it approved by the Department)

Therefore(4W + 2S) Pumps Have been taken (Discharge 6654.0 LPM,Head- 65 M 140 HP.) Each 6

9 Main Power Distribution Panel cum MCP for Clear Water to be installed at WTP:- Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable guage and size ,dust and vermin proof and painted consisting of proper power distribution 4 pole 800A copper busbar, 1 no. incoming feeder of 800A MCCB, 4 nos. 315 A MCCB for outgoing feeder of clear water pump sets (with spare feeder),2 nos. 100 A & 63 A MCCB for WTP. & other Utilities,2 nos. 32 A MCB for lighting feeder, switch disconnected isolator (TPN), selector switches, Volt-meters, Ampere-meters,indicator lamps etc. all complete with internal wiring,protection units/relays and capacitor banks of proper KVAR for Power Factor .improvement for pump sets and other equipments, etc. all complete as per site requirement,Instruction of E/I. and IE rules Each 1

Total Quoted Amount (Part B)

Total Quoted Amount (Part A + Part B)