Construction of Marriage Hall for Arulmigu Thiruvilanjikumarar Temple Ilanji Tenkasi Taluk and District

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except to rock requiring blasting but including shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well consolidated and depositing the surplus earth within the compound with an initial lead of 10 metres and lift of 2 metres in places as shown by the departmental officers and clearing levelling the site etc complete complying with standard specification.

Upto 0 - 2 .00 m depth

Cement concrete 1:4:8 (one cement four sand and eight aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification.

Supplying and filling using 20mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted. etc. complete complying with standard specifications

Supplying and filling using 40mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted. etc. complete complying with standard specifications

Supplying and filling using 10-12mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted. etc. complete complying with standard specifications

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 20mm gauge hand broken granite stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification

Supplying and filling in foundation and basement with filling Stone Dust in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the departmental officers etc. Complete complying with standard specifications .

Supplying and filling in foundation and basement with Conveyed Earth in layers of not more than 15cm thick well rammed watered and consolidated etc.,

Supplying and laying of Interlocking Paver Block Stone 83mm thk. Over a base layer of crushed stone sand filling incl. Cost of materials laying and Labour charges etc.,

Random Rubble Masonry in cement mortar 1:5 [one cement and five sand] using new hard granite stones including providing new bond stones wherever necessary including simultaneous flush pointing of the exposed surface above ground level with the same mortar and all incidential charges such as scaffolding, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.

For column footings and Grade beam

For plane surfaces such as rectangular or square RCC columns

For RCC slabs, beams T or L beams

Additional strutting for 3.30 m to 3.75 m

Circular column

Supplying fabricating and placing in position mild steel or ribbed for steel bar / rods for reinforcement grill for all RCC works including cost of steel and binding wire and labour charges for decoiling cutting binding and tying the grills etc complete complying with standard specification as directed by the departmental officers.

Providing and laying in position, standardised concrete Mix M-20 grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of work with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55 including admixyure (Plasticiser / super plasticiser ) in recommended proportions as per : 9103 to accelerate retard setting of concrete, improve workability without impairing strength and durability with about (5Cum) 7730kg. og 0mm machine crushed stone jelly and with about (3.3cu.m.) 5156kg. of 10-12 mm machine crushed stone jelly with about 4.79Cu.m. )7670kg. of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying , vabricating with mechical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/ roof slab where ever necessary without claiming extra ,etc., complete.complying with standarde specification and as directed by departmental officers.The coarse and fine aggregates to be used should compling with the requirements of IS Standards. ( No separete payment will be made by the department for excess usage of materials)

Upto basement

Ground floor Super structure

First floor

Second floor

Brick work using Country bricks in Cement Mortar Following ratio 8 3/4" x 4 1/4" x 2 3/4" including cost and conveyance of all materials and all labour charges including curing working in height etc complete.

Upto basement in CM 1:5

Ground floor Super structure in CM 1:6

First floor Super structure in CM 1:6

Second floor in CM 1:6

Brick partition wall in C.M 1:3 using Ground moulded burnt Chamber bricks of size 9” x 4 3/8” x 2 3/4” including cost of all materials and labour charges etc.. complete.

Brick work with Dry Bricks using Second Class Ground moulded Chamber Burnt Bricks of size 9'' x 4 3/8 '' x 2 3/4''

Plastering Work in CM 1:3 (One cement Three sand) with 20mm thick including Cost and Conveyance of all Materials and all labour charges etc Complete.

Plastering with CM 1:5 (one cement and five sand) 12mm thick including scaffolding finishing curing etc., complete complying with standard specification and as directed.

Special ceiling plastering and finishing the RCC exposed surface such as RCC slabs sunshade facia canopy slab staircase waist slab landing slab etc with cement mortar 1:3 (one cement and three sand) 0mm thick including lacking and providing necessary cement mortar nosing beading etc wherever necessary and as directed complying with standard specification.TNBP No : SS 56 and 57.

Painting two coats with approved quality of water based exterior emulsion paint including one coat of priming coat in cement plastered wall surfaces in all floor including cost of all materials brushess, etc., scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime, the proportion of brick jelly to lime being 32 to 12 ½ (No sand to be added) by volume and laid over the RCC roof slab in a single layer and consolidated to the finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc. complete complying with standard specification.

Finishing the top of roof with one course of approved first quality of new Machine Pressed tiles of size 200mm x 200mm x 20mm thick of approved quality laid in C.M. 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to Indian standard as approved by the departmental officers at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same mortar mixed with water proof compound and red oxide etc. complete complying with standard specification.

Paving the flooring with high quality specail coloured and Double charged Virtified tiles of approved quality and brand of size 600mmX600mmx8mm thick for flooring of approved quality and colour set in cm1:3 (one cement an d three sand ) 20mm thick and pointing with white cement using at the rate of 0.40Kg/m2 including finishing the joint neatly, pointing flush with tiles surface etc,complete complying with standard specification and as directed by the departmental officer.

Paving the floor with Granite slab of size 1200x 600mm and above 18/20mm thick in all floors in CM 1:3, 20mm thick Granite slab jet black 18 to 20mm thick for flooring.

Providing Double nosing to the granite slab in corner including hire charges for tools , plants and all incidental charges etc., complete.

Supplying and fixing over the hard base with cement based Hydraulic pressed pre polished Anti-Skid tiles 30cm x 30cm x 20mm thick (Like Eurocon) of any colour with cement mortar 1:3 (One cement and three sand) 20mm thick and pointed with same colour cement added with colour pigments at 0.4 kg/m2 including cutting, wastages finishing and curing as directed by the departmental officers etc complete complying with standard specificaions.

Supplying and fixing over the hard base with cement based Hydraulic pressed pre polished Anti-Skid step tiles 30cm x 30cm x 20mm thick (Like Eurocon) of any colour with cement mortar 1:3 (One cement and three sand) 20mm thick and pointed with same colour cement added with colour pigments at 0.4 kg/m2 including cutting, wastages finishing and curing as directed by the departmental officers etc complete complying with standard specificaions.

Flooring with Ceramic joint free glazed tiles of approved quality and colour of size 305x305x6 mm thick in all floors over a base layer of cement mortar 1:3 (one cement three sand) 10mm thick and laid straight alignment and pointed neatly with same

Dadooing the walls with with best approved quality colour glazed tiles of size 300mm x 450mm x 8mm C.M 1:2 including cost of all materials and labour charges etc., complete

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm White glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two CS sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G. M. Wheel valve, etc., complete.

Supplying and fixing of fine Cuddapah slab of 38 / 40 mm thick for Cup - board arrangements in brick wall including levelling to correct alignment etc complete complying with standard specification and as directed by departmental officers

Supply and fixing in position CI Manhole covers with CI Frames (Heavy Duty) of size 60cm x 60cm

Manufacturing and fixing in position of RCC Precast slab CC 1:2:4 - 50mm Thick using 20mm 'size of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of steel, fabrication of reinforcement, centering, strutting and shuttering and placing the grills in position etc., complete complying with standard specification

Supplying and fixing in position of PVC Ventilating shaft 110mm dia and 3m height including cost and conveyance of all materials and all labour charges for cutting,fixing in position,etc., complete.

Supply and fixing mild steel grills for windows, ventilator, gate, ladder etc including priming coat.

Manufacturing, Supply and Fixing of M.S. steel doors with following specification. MS angles of size 40x40x 6mm at 3.5 kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60 kg/m for the shutter frames including one coat of red oxide primer.

Providing cupboard shelf double leaf shutter using 19 mm thick water proof plywood shutter with country wood frame 12 x 5 cm size both vertical and horizontal frame .The edges of plywood shutter should be fixed with 25 x 12mm size teak wood beading .The MS piano hinges 2 Nos each 30 cm long should be fixed in each shelf .3 strip magnetic catcher 4 nos,100 mm long handle 'D'type 2 nos ,50mm size door lock 1 no ,125 mm long brass pat lock 1 no should be fixed in each shelf .After the completion of the cupboard shutter the plywood areas both inside and outer side and country wood frame areas should be painted with two coats of enamel painting .The rates inclusive of nails ,fevicols,screws etc., complete.

Painting two coats over new Iron work with best approved quality synthetic enamel paint including a priming coat of Zinc chromite with ready mixed primer of approved quality including cost of primer etc complete in all floors. The rate shall include cost of all materials, taxes, brushes, scaffolding charges and labour charges for painting etc. complete complying with standard specification. [The make and colour of paint to be used should be got approved by the departmental officers before use on works]

Supplying and fixing in postion of 35mm thick solid core flush door shutters double leaf with TW ply on both sides and with TW lipping of size 35x12mm on all edges with necessary adhesives and C.P. Screws. Alu. Butt Hinges (6 nos. 250 x 16 mm Size), Alu. Aldrop 1 No. 250 x 16 mm Size, Alu. Tower Bolt 2 No. 250 x12 mm size, alu. Tower Bolt, 1 No. 200 x 12 mm size, D type alu. Handle 2 Nos, 2 Nos. of 200mm length alu. door stopper with rubber bush shall be provided, as directed by the departmental officers etc., complete.

Supplying and fixing the Teak Wood door Panelled Shutter for Doors with Single leaf with frame, including cost of wind appliance,furniture fittings etc., complete, fittings, labour charges for fixing furniture.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Supplying and fixing T.W Frames of size 127 x 76mm as per standard specifications. for Doors,Windows, Ventilators and other similar joinery works with the following sizesand sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc complete in all floors.

Painting two coats over new Wood work with best approved quality synthetic enamel paint including a priming coat with ready mixed primer of approved quality including cost of primer etc complete in all floors. The rate shall include cost of all materials, taxes, brushes, scaffolding charges and labour charges for painting etc. complete complying with standard specification. [The make and colour of paint to be used should be got approved by the departmental officers before use on works]

Stainless Steel (Salem Stainless Steel) Door Frame(Box Section using Stainless Steel Plate of 1.6mmthick) of size 100mm x 60mm with a rebate of 30 /35mm x 15mm on one side of the frame includingsupplying and fixing dovetail splayed end stainless steel hold fast etc ( SI.NO:130) Pg:44

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing of WPC Door using door frame of the size 70mm x 50mm int joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall re by using 80mm long screws through the frame. The WPC shutter of 28mm thick factory made plain pre laminated Hardware made out of ball bearing butterfly hinges -3 nos, 200 mm tower blot 2 nos and 300 mm aldrop 1 no. and 100mm D type handle 1 no. for each shutter and ISI make SS round lock complete, including cost of materials, conveyance and all other incidental charges and labour charges for fixing the door neatly etc.,

Supplying and fixing in position best approved of ISI quality of PVC rain water down fall pipes having a pressure of 4 Kg./sq.cm including cost of necessry PVC shoe, PVC bend, gratings of required diameter and special clamps, brass screws, nails, etc. and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc. complete. The rate shall be inclusive of cast of removable iron grating. The PVC pipe shall be fixed in wall with special type of clamps. Special type of "U" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0 M pipe length complying with standard specification. 110mm dia PVC rain water down fall pipes.

Supplying and fixing Mirror 600 x 450 including cost and conveyance of all materials and all labour charges etc complete.

Supplying and fixing best approved quality Brass Chromium Plated Towel Rail 600 mm Long and 20mm Diametre with brackets of same materials including cost teakwood plug and CP Screws etc.,complete complying with standard specifications.

Supplying and fixing in position 15/12mm dia Chromium Plated brass screw down tap including cost and conveyance of all materials and all labour charges etc complete

Supplying and fixing in position of P V C Nahini Trap of size 100 x 75mm with best stainless Steel Gratings of approved make and quality,fixed over a bed of of brick jelly concrete 1:2:5 (One part of Lime, Two parts of Sand and Five parts of 40mm size brick jelly) and finished with cement mortar 1:3 ( One part of Cement and Three parts of Sand) including cost and conveyance of all materials and labour charges including dismantling the masonry works wherever necessary and making good etc complete .

Supply and Fixing PVC water tank of 1000lit including cost of all materials and labour charges etc., complete

Supplying and fixing in position first quality and approved variety Gun Metal Gate valve (Heavy type)/ Wheel Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of shellac, thread, labour charges for cutting, threading,fixing in position etc., for both internel and external water supply arrangements.

32 mm dia Gun metal Gate valve

32 mm dia Gun metal Wheel Valve

Supplying laying and jointing following diameter UPVC pipes of super thick of approved quality and best quality conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing UPVC specials but excluding cost of such specials. Fixing into Bore well / below ground level for erection of compressor motor, suction line air pipe etc.,

32mm dia PVC pipe

Supplying, laying and joining the following size of G I Specials including cost and conveyance of all materials and all labour charges etc complete.

20mm x 15mm Reducer Elbow

32 mm dia elbow

Supplying and fixing of 110mm dia PVC Sanitary pipe having a working pressure of 6 kg/cm2 including cost and conveyance of all materials and all labour charges etc complete.

Supplying and fixing in position of the following UPVC specials

110mm dia Door elbow (PVC)

110mm dia Elbow (PVC)

32mm Elbow

32mm Tee

20mm Elbow

Supplying and erecting in position of following litres capacity Industrial Model Reverse Osmosis Water cum Purifier to deliver potable water with world health organisation (WHO) standards with following accessories. (a) MS Skid - 1No, (b) Media 11054 No. Vessal with 20 nb Multi Port Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50Hp - 1No (d) Vertical Pump 2-9, 2.00HP/Single Phase - 1No. (e) Membrane 40x40 flimtech (or) equailaents/Osmonic (USA) -1No. and Membrane Pressure Vessal 40x40-1No & Pressure gauge - 2Nos. (f) Flow Metre- 1 No. 20'' Filter with Housing-1No, Low pressure Switch - 1No, Level Switch - 1No & Necessary CPVC Pipes and Fittings. The system shall be provide with Twp Panel Control System with necessary Stainless Valve and Fittings and Float Control etc. The rate should be inclusinve of all civil works wherver necessary to install the system in position and intact. (SOR- Si.No:269)

Supplying and Fixing of 4 nos fire buckets made out of 40 x 40 x 6mm MS Angle including all incidential charges etc., complete (SOR- Item no:8(e) page no-140)

Supplying and Fixing of Fire Extinguiser Co2, 4kg confirming to TAC norms including all incidential charges etc., complete (SOR- Item no:8(h) page no-140)

Drilling of 6" dia bore wells any where in tamilnadu including transportation from one place to another within tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140mm / 150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site (site will be shown by the Departmental officers) including construction of mud pit.(Based on TWAD Board schedule of rates 2024-25 )

Supplying and fixing of 150mm dia CS PVC casing pipe assembly with slota (or) with out slots in the drilled hole including welding the joints etc complete and supplying and packing the annular space with pebbles of size and quality as approved by the departmental officers etc complete.

Supply and fixing of 3.00 HP Submersible pump including Labour charges for errection of submergible pumpset in bore well , all accessories cost and conveyance etc complete.

Labour charges for errection of submergible pumpset in bore well including fixing and jointing submergible cable with proper clamps etc complete.

Supplying and fixing of 3 phase electrical Panel board D.O.L with two level guard and auto start including cost and conveyance and fixing charges etc complete. [ Based on PWD schedule of rates 2024-2025

Supplying and fixing of 4 core 6 PVC armoured UG cable including cost and conveyance and labour charges etc complete. (Based on PWD local markets rates for electrical item 2024-2025) (Part E 1 (P))

Supplying and fixing of HDPE pipe 50mm dia HDPE pipes for 5 HP Submersible pumpset including cost and conveyance of all materials and all labour charges etc complete.(PWD Local market rates (2024-2025) ((SI.NO: 393 (D) (c))

Supply of Suitable dia PVC Nylon rope for submersible motor [Based on PWD schedule of rates 2024-2025 ]

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and Fixing of Aluminium Dye Cast Letters 9" height in Tamil of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process .for அருள்மிகு ÂUéyŠÁ¡ Fkhu® திருக்கோவில் திருமண மண்டபம்

Electrical Work

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD - 281)

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point Higher End (SD - 298)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips / cromption etc) Higher End (Data -1)

Supply and fixing of 4'20W LED fitting complete with 1.5 mt conduit pipe suspension from the ceiling PVC unsheathed copper leads from terminals to the fitting Higher End (Data-2)

Supply and fixing of 4'20W LED fitting complete with 2 mt conduit pipe suspension from the ceiling PVC unsheathed copper leads from terminals to the fitting Higher End (Data-3)

Supply and fixing of Havells jeta alba flood light 100W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminal to the fitting Higher End (Data-4)

Supply and fixing of fancy lamp Fitting with 9W LED bulb on wall connection (Data-5)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD - 448)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD - 110)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp (SD - 107)

Supply and fixing of 750mm (30") sweep AC wall Mounting air circulator with suitable clamps and connection (DATA - 6)

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD - 118)

Supply and fixing of louvers shutters arrangements for 450mm (18") sweep light duty AC Exhaust fan (SD - 123)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall(SD - 114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan (SD 120)

Supply and fixing of 4KVA stabiliser of cut off range (190V-270V) (Make V-Guard) (Data-7) SOR- M 1988

Supply, installation, testing and Commisioning of 1.5 ton split type air conditioner with copper tubes for outdoor unit and stand Make O- General/ Daiken)(Data-8)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 377)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-401)

Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data-9)

Supply and fixing of 40A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data-10)

Supply and fixing of 32A TP MCB Switch in suitable 4 pole sheet steel enclosure with earth connection (Data-11)

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch in suitable angle iron frame work with MS cable entry boxes with earth connection only.(SD-644)

Supply and fixing of 100A MCCB Switch in suitable 4 pole sheet steel enclosure with earth connection (Data-12)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.(SD-526)

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.(SD-501)

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door ) with 1 no. 100 A 4 P MCCB switch as incoming and 2 nos. 63A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End.(SD-600)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.(SD-337)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.(SD-351)

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.(SD-353)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 10 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (SD- 347)

Supply and Run of 4 of 16 sqmm (101/0.45) PVC insulated Single Core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed on wall and ceiling with continuous earth wire connection of 1 of 40 sq.mm (50/0.3) PVC copper wire with suitable colour (Data-13)

Supply and Clamping of 3-1/2 x 95 sq.mm. PVC LTUG armoured cable on post or wall MS Clamps (SD-204)

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection (SD-168)

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD-133)

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with necessary clamps to hold the LTUG aluminium Service cable with painting of suitable colour (DATA - 14)

Supply and run of 1 of No.8 SWG. PVC copper on suitable PVC rigid pipe on wall with painting of suitable colour for Earth Connection (DATA - 15)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD-211)

RAJKAMAL CONTRACTORS (BID ID -1329501)