Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹45.2 L+₹2.7 L (6.36%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹46.6 L+₹4.1 L (9.66%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MIS) MHOW
Garrison Engineer (Maint) Inf School Mhow
PROVN OF VIEWING GALLERY FOR IAG SNIPER FD COMPETITION AT BARGONDA FD FG RG AND CERTAIN REVENUE AND MINOR WORK AT BARGONDA FD FG RG AT INF SCHOOL MHOW
2022_MES_546417_1
8515/GE (MIS)/Mhow
Open Tender
Civil Works
Item Rate
150 days
GE (MIS) MHOW
As per Tender documents
8 documents required · 8 mandatory
₹500
Yes
₹87,400
Yes
30 Sept 2022
20 Aug 2022
19 Sept 2022
20 Aug 2022
17 Sept 2022
3 Sept 2022
22 Aug 2022 - 27 Aug 2022
Amount
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified.
Excavation in trenches not exceeding. 1.5 metre wide and not exceeding 1.50 metre in depth for foundation, manholes and n.exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified.
Excavating over areas, not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified.
Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete.
Removing excavated material (soil) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified.
M&L for Hard core with broken stone of gauge n exc 63 mm as in filling in foundation, sub base etc all as specified.
M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete and base of floor complete all as specified.
M&L for PCC 1:3:6, type C1 using 20mm graded stone aggregate as in sub base of floor complete all as specified.
M & L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation ,post, etc complete all as specified.
Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified.
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM(1:6) complete all as specified..
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even & smooth.all as specified.
M & L for preparation of new plastered surface of wall and applying two coats of Cement Base Paint all as specified and directed. Make : Asian- Apex or other equivalent as approved by GE.
M & L for machine pressed coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over compacted dry sand and jointed with coloured cement slurry and pigment to match with colour of tile complete all as specified..(Note: Sand cushioning shall be measured and paid separately.)
M&L for sand cushioning under floors including spreading, watering and consolidation complete all as specified.
M&L preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coats of red oxide primer complete all as specified.
S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection and vertical section etc. complete all as specified and directed.
S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified.
S&F Mild steel plate (Plain or chequered) as in shoe plate, base plate and gusset plate forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA complete all as specified.
S&F Pre-painted Galvalume/ Zinkalume corrugated sheeting 0.50 mm thickness as in roof, etc, having crest depth 28-30mm at a pitch of 195-250 mm and having 2 ribs in between for addition strength fixed with zink coated self drilling fastener including EPDM washer complete laid with one corrugation side lap and minimum 150mm end lap complete all as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, with self tapping screws complete all as specified.
M&L for Machine cut Kota stone slab flooring 20 mm thick (+ 2mm) of 58cm x 58cm in size (or nearest size as available in the market) laid over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, complete all as specified.
M&L for Machine cut Kota stone slab as in riser of steps, skirting, dado and pillar 20 mm thick (+ 2mm) of 58cm x 58cm in size (or nearest size as available in the market) laid over and including 15mm thick backing coat in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, complete all as specified.
M & L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified..
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified..
M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, fair finished surface of concrete complete all as specified.
M&L for RCC M-25 grade concrete (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. NOTE: Reinforcement shall be measured and paid separately under relevant item.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surface of concrete complete all as specified and directed
M&L for RCC M-25 grade concrete (Design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.
M & L for for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finished surface of concrete complete all as specified.
M&L for RCC M-25 grade concrete (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, linters, chajjas, over 1.5m span complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), fair finished surface of concrete complete all as specified..
M&L for RCC M-25 grage concrete (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified. NOTE : Reinforcement shall be measured and paid separately under relevant item.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in Hard/Dense soil, complete all as specified.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and getting out in Hard/Dense soil, complete all as specified..
M & L for brick work with sub class 'B' modular bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified.
M & L for use and waste of timber formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor, roofs sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified.
M & L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for levelling course in floors complete all as specified.
M & L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified.
M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface mixed with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified. (Note:- Liquid water proofing compound shall be measured and paid separately)
M&L for rendering 5mm thick in ceiling CM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with MS square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.
S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section.
S&F aluminum alloy handle fabricated anodised of 150 mm long.
S & F second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.
S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats including two coats of red oxide primer complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in bed blocks of hold fast, etc complete all as specified.
S&F 35mm thick factory made second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified.
S & F 35 mm thick factory made,second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified.
S&F fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.
S&F aluminium coloured power coated door shutters, aluminium section weighing minimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specifiedand directed.
S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified..
S & F for galvanised Stainless steel wire cloth of 0.45mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.
S&F aluminium (extructed section) Door closer hydraulically regulated, desingnation No. 3, universal type, suitable for door shutter and fixed.
M & L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall with putty complete all as specified.. Note:- Putty shall be measured and paid seperately under Ser Item No 62.
M & L for preparation of new plastered surfaces of wall and applying two coats of Acrylic Smooth exterior paint of required shade @ 1.67 litre/10 sqm over and including a coat of primer(@ 2.20 kg/10 sqm) of same make base over a coat of putty all as specified and directed. Note:- Putty shall be measured and paid seperately under Sel Item No. 62 Make Asian- Apex or other Equivalent as approved by GE.
M&L for preparation of newly plastered surface of wall and and applying two coats of cement base wall care putty (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified.
M&L for non –skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified.
M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified.
M&L for Machine cut Kota stone slab flooring 20 mm thick (+ 2mm) of 58cm x 58cm in size (or nearest size as available in the market) laid over and including 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish, complete all as specified.
All as per item No 65 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 complete all as specified.
M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polishing using mechanical grinder and moulding edges complete all as specified.
M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement complete all as specified NOTE : WPC shall be measured and paid separately under respective item.
M & L for preparation of surface for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.
M & L for applying a two coats of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified. NOTE : Ist coat for bonding material below membrane and 2nd coat on top of membrane.
M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified..Note: Application of APP membrane shall be done by authorised applicator of membrane manufacturer.
M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm on APP membrane including preparation of surface complete all as specified and directed.
Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or other equivalent as approved by GC.
S& F Rotational moulded Polyethylene water storage tank 1000 litres capacity (cylindrical vertical with closed top) double layered layer hoisted and fixed in position all as specified in SSR part I.
S& F Rotational moulded Polyethylene water storage tank 500 litres capacity (cylidrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part I.
S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified.
All as per item no 76 above but 20mm bore.
S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe 15mm dia and fixed.
S&F CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified. Make - Plumber/Essco of jaguar(Economical Range)
S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified. Make-Plumber/Essco of jaguar(Economical Range).
S&F fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified. Make : Plumber/Essco of jaguar(Economical Range)
S& F CP toilet paper holder complete all as specified.
S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified.
S&F PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified.. .Make-Plumber/Essco of jaguar(Economical Range)
S&F health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified .Make : Plumber/Essco of jaguar (Economical Range)
S & F vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .
S&F Vitreous China Urinal, Half stall type,white with grating and union for discharge pipe, urinal spreader, waste pipe including all fittings for urinal.complete all as specified.
S&F brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete.
S&F 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified.
S&F 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as specified. Make: Plumber/Essco of jaguar(Economical Range)
S&F 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified.
S&F PVC ( SWR) bends any radius bore of 75 mm.
S & F PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified.
S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified.
S&F PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Minimum Weight 210 gms) complete all as specified.
Preparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M & L for preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified .
S&F Mild Steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
M&L for (SGSW) drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified.
M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in concrete bed to drain pipe of 150mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified.
M&L for RCC type 1:2:4 type B1 using 20 mm graded granite stone aggregate) as in precast cover slab for manholes and soak well cover slab etc set in cement mortar (1:4) etc with and including necessary form work all as specified . Note:- Reinforcement shall be measured & paid separately under relevant item.
M&L for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping including necesarry form work complete all as specified.
M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified.
S&F Stainless Steel Railing includng all fixing arrangement complete all as specified.
M&L Veneered decorative plywood 12mm thick grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified.
S&F CP pillar cock High Neck with 235mm Extended Body fixed in 15 mm bore pipes complete all as specified Make : Plumber , CAT Part No. - ARA 1109
S& F CP toilet paper holder with Lid Cover complete all as specified. Make : Plumber. Cat Part No. - EG 7007
S& F Corner Glass Shelf 250mm made of Toughned glass complete all as specified.
S& F Liquid soap dispenser of metal bottle with all fixing arrangement fixed on wall complete all as specified .Make : Plumber. Cat Part No.- EG-7005
S&F vitreous china European wash down water closet pedestal pattern (S trap) of over all size 570x370x390mm white icluding seat cover excluding flushing cistern and flush pipes complete all as specified and as directed .Make : Plumber. Cat Part No.- PBW-EWC-0025
S&F vitreous china wash basin white (table top) of size 490x400x145mm including 32mm brass CP waste coupling complete all as specified . Make :Plumber. Cat Part No.- PBW-CTB-2315
S&F Vitreous China Urinal of over all size (395x380x610mm white with grating and union for discharge pipe, urinal spreader with waste pipe including all fittings for urinal.complete all as specified. Make : Plumber. Cat Part No.-PBW-WHU-0202
Bharadwaj Builders
M/S UnitedConstruction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .