SPL REPAIR TO BLDG NO NP-3 (OFFRS MESS),PROVN OF COMPOUND WALL OF JCOs OR MD ACCN AT OLD MH AND HARD STANDING FOR R AND I AREA IN LT AD REGT WKSP UNDER B AND R-I UNDER GE (I) KANPUR.

Amount

Dismantiling of concrete/plaster by chiselling from RCC members/Brick Wall or like col, beam parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding RCC with welded mesh & tack welding using Araldite epoxy resins ( manufactured by M/s ciba Geigy Ltd or other approved manufacture) & provision guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement ) of thickness 30mm average including stripping float in with wooden strippers for proper dimension control necessary form work & scaffolding up to Two storey complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement cleaning & removing of waste material etc as directed at site. complete and applying two coat of oil bound distemper over 2 mm thick JK putty all as specified and directed by Engineer-in- Charge. ( Welded mesh & addl reinforcement if required measured and paid separetly)

Mild steel deformed bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed ) ,complete all as specified and directed by Engineer-in-Charge.

Welded steel wire fabric weight n exc 4 Kg/sqm ,complete all as specified and directed by Engineer-in-Charge.

Dismentling floors, hearth or wall tiling including cement morter bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed .

Demolition of brick work built in Cement Mortar complete all as specified and as directed by the Engr-in-charge.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level).

M & L complete removal of existing old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying Two coats of oil bound distemper (of approved shade) over 2 mm thick wall care putty complete all as specified and directed by the Engineer-in-Charge. Make of wall putty:- Birla/JK/Kamdhenu

M&L for preparation of new paster wall surface and applying smart care damp block 2k waterproof coating cementitious powder as per manufacturing instruction of Asian paint, for damp treatment of wall and applying two coat of oil bound of distemper over 2 mm thick wall care putty complete all as specified and directed by Engr-in-charge.

M & L for complete removal of existing treatment of old surfaces of walls including brooming down or steel wire brushing, scraping down moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of weather coat exterior paint asian (appex) or equvalent of makes as specified complete all as specified and directed by Engineer-in-Charge.

M & L for Preparation of New Plastered surfaces of walls and applying two coats of weather coat exterior paint (APPEX) over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge

S&F in HDPE triple layer (white colour) rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.

M & L for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.

M & L for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.

M & L for Stop valves, 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe and fixed in repairs, complete all as specified.

Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc.

M & L for Rendering 15 mm thick cement plaster in Cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth w/o using extra cement .

M & L for Rendering 15 mm thick in CM (1:4) with mixing integral water proofing compound as per manufacturer's instruction & finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing compound shall be measured and paid separately.

Supply only water proofing compound ISI marked

M & L for 15 mm bore central hole basin mixture , chromium plated, without popup waste system with 450mm longbbraided hoses pipe fixed in repair, complete all as directed. Make : Cat No KUP-35011BPM OF Jaquar or equveilent

S&F in repair 15 mm bore Wall mixture with overhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges complete all as specified. Make : Cat No QQP-7273PM OF Jaquar or equveilent

S&F in repair Mirror cabinet (PTMT Alloyetc complete all as specified. Make Pryag or equivalent fixed in repair

S&F, SS hand health faucet for water closet ,pedastal pattern fixed in repair Make : Cat No ALD-587 OF Jaquar or equveilent

S&F 120 mm dia shower rose, Brass , chromium plated with swivel joint complete fixed in repair. Make : Cat No OHS-1789 OF Jaquar or equveilent

S&F in repair, oval counter type vitreous china wash hand basin of size 56x43X19.5 cms, white including waste coupling of PTMT 32 mm.complete all as specified and directed by Engineer- in-Charge Make : Cat No FLSWHT-5701 OF Jaquar or equveilent

S&F, 15mm Bip taps, cast copper alloy(chromium plated) with crutch handle or butter fly handle screwed down , screwed for iron pipe and fixed in repair. Make : Cat No COP-037PM OF Jaquar or equveilent

15mm Angle valves cast copper alloy , cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified . Make : Cat No LYR-38053 OF Jaquar or equveilent

S&F in repair Conceeled stop cock,15 mm bore, cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified . +B70

M & L for 50 mm thick, plain cement concrete 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

M&L Vitrified tiles , light shade,10 mm thick( square/rectangular) polished ,area of each tile not exceeding 0.36 sqm , laid in floors with neat cement slurry over 15 mm thick screed bed in cement mortar 1:6, including pointing in white or coloured cement to match the shade of tiles,complete all as specified and directed.Make:KAJARIA/JOHNSON/SOMANY/BELL/ORIENT

M & L for Vitrified tiles , light shade,10 mm thick( square/rectangular) polished ,area of each tile not exceeding 0.36 sqm , laid in skirting over rendering cement plaster 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, laid in floors with neat cement slurry over 15 mm thick screed bed in cement mortar 1:6, including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.Make:KAJARIA/JOHNSON/SOMANY/BELL/ORIENT

M & L for glazed ceramic coloured tiles of size (450x300mm)x7 mm thick,laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set in cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

S&F low density polyethylene pipes (LDPE) of pressure rating 6KGF/Sqm cm 32 mm bore in repair and complete all as specified and directed.

M&L second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints wood and making good to wall and complete all as specified and directed.

S&F Ball and catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed and complete all as specified and directed.

M&L 6mm thick teak wood lipping over prelaminated boards 18mm thick and complete all as specified and directed.

S&F 40mm width Continuos (piano) hinges, and complete all as specified and directed.

S&F 18/19 mm Prelaminated particle boards exterior gde prelaminated at both sides with decorative choice lamination in repairs and complete all as specified and directed.

S&F 9 mm Prelaminated particle boards exterior gde prelaminated at both sides with decorative choice lamination in repairs

S&F 40mm dia,brass polished cupboards knobs fixed with nut,screw and washer of mild steel,bright finished in repairs and complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each with shutters (without taking of shutters from the frames )

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames ).

S & F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely.

S&F of 200 mm long barrel tower bolt aluminum anodized of extruded section complete all as specified and directed.

S&F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

Supply and fix 100 mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws complete all as specified and directed.

Supply and fixing 125 mm size aluminium handle febricated type anodised complete all as specified and directed.

S&F, mild steel 300mm, ordinary rat tail door spring etc complete all as specified.

M & L for Mild steel Framed work as in doors /chowkhats or gates of angle or other section with gusset plates rails,braces ,staircase etc, complete, drilled for fixing of steel sheeting etc prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as directed, confirming to FE-410-W( Gde-E-250).

M & L for Preparation of new or previously untreated Steel surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetick enamells paint over one coat of red oxide primer,complete all as specified and directed .

S&F Galvanished mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with tinned tacks, galvanised wire staples, complete all; as specified and directed by E-I-C.

S&F, Aluminium anodised barrel tower bolts, 150mm long , of extruded section.

S&F, repair Fency type stain less steel curtain rods of 20 mm dia , as in doors/ windows pelmets including SS brackets and SS funnels.

S & F factory made uPVC white colour two track two panels sliding glazed window upto 1.50 m height made of small series frame50x44mm & sash 32x60mm both having wall thickness of 1.9+- 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm ) comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profile duly reinforced with 1.6+-0.2mm thick galvanized mild steel section made from roll forming process of required length shape & size according to uPVC profile), appropriate dimension of uPVC extrudedglazing beads and uPVC extruded interlocks, EPDM gasket,wool pile,zinc alloy white powder coated touch locks with hook, zinc alloy body with single nylon roller weight bearing capacity to be 40 kg ),GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screw etc profile of frame & sash shall be mitred cut and fusion welded at al corner, including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and including drilling and including 5.0 mm thick tinted glass with necessary beading / packing and necessary fittings &fixtures , fixed with tinned tacks or galvanised wire staples drilling

S&F 3 track window frame(124mmx50mm) is shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 2 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails,Mosquito net is fixed with SS wiremesh jali using S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look

S&F, aluminium chequered grills as on uPVC windows, wight not less than 1.20 Kg/Sqm50 kg / sqm and fixed all as specified and directed by Engg- in Charge.

M&L, applying two coats of synthetick enamells paint over a coat of zink oxide primer on steel surfaces , including preparation of new surfaces of any description .

S&F Corner shelf with frame triple ,chromium plated ,fixed in repair, complete all as directed.

S&F Toilet paper holder ,chromium plated , fixed in repair,complete all as directed. Make : Cat No ACN-1151N OF Jaquar or equveilent

S&F Towel shelf ,chromium plated ,fixed in repair, complete all as directed. Make : Cat No ACN-1181FHS OF Jaquar or equveilent

S&F Front shelf , with frame,chromium plated ,fixed in repair,complete all as directed. Make : Cat No AKP-35771P OF Jaquar or equveilent

S&F. PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F Soap dish , chromium plated , complete all as directed. Make : Cat No CAN-1131N OF Jaquar or equveilent

M&L for cement concrete type B0 (1:2:4 ) using 12.5 mm graded stone aggregate as in coping, roof kerb incl hunching, benching etc and sunkhen portion area etc complete all as specified and directed.

Material & labour for 10 mm thick plastering on roof in cement mortar (1:4) with using WPC @ 3% by weight of cement incl finishing the surfaces even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately

M & L for 25 mm Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate)on roof slab and complete all as specified and directed

S&f PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm dia incl taking down old pipe

S&F 110mm bore PVC (SWR) bends with any radius etc, and complete all as specified and directed

Cutting groove in brick wall, 75 mm wide and 65 mm deep and shaping horizantal face of groove witn CM (1:3) complete all as specified and as directed by the Engineer-in-charge.

M&L for Atatic ply propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge with, including Removing of old Treatment and following courses of descriptions given below :- (a) Second coat of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm. (b) Third course i.e. laying of APP modified membrane described hereinbefore with joints sealed with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and curved well before lying the membrane. (c) Fourth course of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm.

M & L For aluminium paint 100ml/Sqm over treated surface on roof complete all as specified and directed by the Engineer-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire radiantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Dismantling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and as directed by the Engineer-in-charge.

M&L pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with screws complete all as specified and as directed.

M & L for Rendering 10 mm thick cement plaster in Cement mortar (1:3) on RCC Ceiling ,finished even and smooth w/o using extra cement.

M & L for Applying two coats of oil bound distemper over two mm thick J K putty on celing including preparation of new surfaces, complete all as specified.

M & L for Plain cement concrte (1:4:8) type D-2 (using 40mm graded aggregate) in foundation filling and mass concrete , complete all as specified and directed by Engineer-in-Charge

S & F Factory made Machine pressed precast colourd (combination of red and yellow) concrete interlocking paver block any shape or size conforming to IS 15658 of 80 mm thickness M-40 grade with pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by the Engineer in Charge.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for premium quality ceramic coloured tiles for endura series of HR johnson or equivalent as approved wavy pattern of size 300mm x 300mm and 10mm thick of dark coloured (as approved) fixed with neat cement slurry @ 3.00Kg/Sqm over and including 20mm thick screed bed of cement mortar 1:4 including pointing in white cement and pigment complete all as specified and directed by Engineer - in charge.

M & L for China ware closet pedastal pattern one piece cascade type of superior special colour including fixing bolts, Fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed by Engg-inCharge. Make : Cat No OPS-WHT-15753NP180UFSMZ OF Jaquar or equveilent

M & L for Complete removal of existing treatment i.e. white wash ,colour wash ,cement paitn etc. of wall complete and applying two weather coat paint of any colour complete all as specified and directed.all as specified and directed.

S&F 100mm wide venetian blind vertical or horizental type including aluminium power coated guide rail, pully thread and GI brackets complete all as specified and directed by Engineer-in charge.

S&F, cast iron floors traps , 75 mm outlet dia with grating including jointing to waste pipe and fixed in cement concrete type (1:2:4), complete and fixed all as specified and directed by Engg-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided and complete all as specified and directed.

M & L for 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like in cement mortar (1:4) including noising edges point- ing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite.

S & FSolid PVC Wall Lining consisting of 5mm thick single side prelam Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 Sqm on plan and getting out in soft and loose soil.

M&L reinforced Cement Concrete (nominal mix) Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in Beams,bands, cantilevers, lintels over 1.5 M span.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality

M&L Form work to bottom, sides and soffits of bands, lintels, cantilevers, shelves including supports etc.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete or brick surface complete all as specified and directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed and specified by engr-in-charge.

Removing excavated soil not exceeding 1.5 km distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.

Preparing new surfaces by washing, rubbing down and stopping of painted surfaces and applying two coats of cement base paint on surfaces of walls/PCC louvers and jallies over a coat of primer complete all as specifid and directed

Surface dressing n.exc 15 cm deep and getting out as in soft/loose and soil complete all as specified and directed.

Hardcore of gauge n. exc. 63 mm (broken stone boulder), deposited, spread and levelled in layers, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M&L 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded agregate) and soil complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gde 'A' and complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring for one light point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 20/25mm dia with all fittings (ISI Marked) controlled by one switch including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-107 here in above but upto ceiling height and on surface at ceiling and complete all as specified and directed.

All as per srl item No-107 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit and complete all as specified and directed.

All as per srl item No-107 here in above but for one 3 pin 5A socket outlet independent controlled by one switch and complete all as specified and directed.

All as per srl item No-107 here in above but for one 5A socket outlet on the same board controlled by one switch and complete all as specified and directed.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts and complete all as specified and directed.

S&F switch modular type one way 1 module 16 amps 230 Volts and complete all as specified and directed.

M&L for bell push modular type 1 module one way 6 amps 240 volts and complete all as specified and directed.

M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts and complete all as specified and directed.

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts and complete all as specified and directed.

M&L for fan regulator modular type 2 module, 230 volts and complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals. Make :Anchor/SSK/Leader and complete all as specified and directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified. Make :Anchor/SSK/Leader

S & F Lamp holder insulated body with back plate for dome batten fittings and complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. Make of Cable :L&T, Havells, Plaza

All as per srl item No-121 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia.

S&F in replacement of wall mounted LED light fittings 20/22 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed.

S&F in replacement of LED bulk head fitting with opal diffuser 10 Watt, 6500 K, IP-65, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed.

Supply and fix in replacement of High power LED street light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd. Make : Havells/Phillips/Bajaj/Panasonic/Crompton

S&F in replacement of LED mirror light fitting 10/11 Watt, 2' long, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make : Havells/Phillips/Bajaj/Panasonic/Crompton/Anchor

Supply and fix in replacement of High power LED wall security light 25 Watt Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd. Make : Havells/Phillips/Bajaj/Panasonic/Crompton

S & F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed. Make : Havells/Indo Asian/C&S//L&T

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size.

M&L MCB single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size.

M&L for single pole and neutral enclousere with a top pin, earth plug and socket copmlete with one SP MCB 25 Amps, 240 Volts.

S&F in replacement of meter fixing box made out of thermoplastic grey colour with transparent cover, cable entry cover, hinged flap, protection cover including cable entry integrated elastic membrance suitable to accommodated one single phase KWH meter including dismentling of old existing meter & meter box, breaking of seal of meter and fixing meter box to flush wall and making connection with proper thimbles, good disturbed surfaces ,refixing seals and wires of the fixing the existing meter in meter box complete.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, without remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. Make - Havells/Crompton/Orient/Anchor / as approved by GE.

Supply and installation of energy efficient Electric Water Heater (Geyser) storage type, having 5 star rating heating coil of capacity 2 KW ,single phase, capacity 25 litres, with cold rolled steel tank with glass coating inside tank including fixing on wall with required fastners , nuts, electric connection and writing MES No in black synthetic enamel paint/ engraving with tool etc complete all as specified and directed by Engineer in charge. Make : Havells / Crompton /Racold /Bajaj as approved by GE(I). Note Contractor will submit guarantee/warranty certificate from manufacturer.

Supply and install of Fresh air fan 230 V, AC single phase of size 225 mm sweep, 900 rpm, plastic body, with louvers & shutter, complete with fixing arrangement, electric connection including with rubber mounting for silent operation, grouting of nuts, bolts, in wall/ ventilator, electric connection and writting MES No in black synthetic enamel paint all as specified and directed.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

Disconnecting electrically and taking out old unserviceable LT UG cables any type of size 6 Sqmm to 25 Sqmm 2 core all as spfd and directed.

Supply and laying to wall or poles or fixing or passing through pipe, in replacement of 1100 volts grade heavy duty cable with XLPE insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 50 sq. mm nominal cross section 3.5 core in service connections all as required and directed. Make of cable : Gloster/Havells/ Grandlay/ Grandlay/Kalinga/Anchor. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed and testing on completion.

M/s DKS Engineering Works

JOG CONSTRUCTION

Allied Builders And Engineers