SPECIAL REPAIRS TO MARRIED ACCOMMODATION BUILDING NO P 17, P 18, P 19 AND P 21 AT INS CHILKA

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) incl making good to match with the existing all as specified and directed

All as per item no 1 above but exceeding 1.5 sqm and not exceeding 4 sqm each

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

Taking down , easing, adjusting and refixing in the same opening shutters of any description exceeding 1 sq m but not exceeding 2 Sq m each and refixing builders hardware as required including renewal of unserviceable screws etc complete all as specified and directed

S&F 2nd class hard wood , 35 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veeneered particle board medium density, wood particle board with commercial face veeners; supplied and fitted to chowkats all as specified and directed

S&F 2nd class hard wood, 35 mm thick Glazed & Skeleton shutters, open reated & prepared to receive glass, guage etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of fraing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door 250mm long bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F standard aluminium door seal with nylon brush(minimum length 1.2m) at lower side to fit at the bottom of door shutter with screws complete all as specified and directed

S & F door eye or magic eye security device fixed to entrance door including making hole in the door as directed complete all as specified and directed

S & F magnetic catch latch for cup board complete all as specified and directed.

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S & F 25 X 3mm MS flat iron as in hold fasts bend to as required confirming to Fe-290 Gde E-165 fixed to chowkhat complete all as specified and required.

S&F Second class hard wood small fittings not exceeding 200 cu cm each such as brackets of any type, shaped door and window stops and the like including all necessary labour complete all as specified and directed.

S & F for 50 mm long butt hinges, medium weight cold rolled mild steel complete all as specified and directed

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame as in cup board, cupboard shelves complete all as specified and directed

S & F Continuous (Piano) hinges mild steel, bright finished, electro galvanized, 30mm width (Flaps when open) complete all as specified and directed.

S&F 75mm long brass handles, cast type, bright polished complete all as specified and directed

S&F Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 100 mm size complete all as speciifed and directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm long cold rolled mild steel medium weight butt hinges complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 150 mm long aluminium handles, cast type, anodised complete all as specified nd directed.

S & F 125 mm long aluminium handles, cast type, anodised complete all as specified and directed.

S&F 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wooden primer complete all as specified and directed.

M&L for preparation of new / old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Taking down existing roof treatment roghening surfaces of old concrete floor / roof by picking sweeping clean and washing down with water to remove dust etc., complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces ofl brick / concrete surfaces, finished even and smooth without using extra cement with using water proofing compound complete all as specified and directed. Note: supply only WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

M&L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etapplying evenly a copat of bituminous primer @ 0.50litre per sqm complete all as specified and directed.

M& L for water proofing roof treatment consists of five layered Atactic polyptopylene modified polymeric membrane of minimum 3mm thick not less than 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms / sqm) laid with LPG torch forced application over roof surface with a side & end overlaps of minimum 100mm with and including priming the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg /sqm each at top and bottom of the membrane as bonding material and a coat of bituminous aluminium primer @ 100 gm / sqm on top including sealing all joints by thermo fusion complete all as per manufacturers instructions, and as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to the site complete all as specified and directed.

M&L 15mm thick water proof plaster in CM 1:3 on roof/sunken slabs finished even & smooth using extra cement complete all as specified and directed. Note: WPC will be measured and paid seperately.

M&L preparation of sunken portion slab surfaces by applying evenly a coat of bituminous primer @0.50 litre per sqm complete all as specified and directed.

M& L for water proofing sunken portion treatment consists of five layered Atactic polyptopylene modified polymeric membrane of minimum 3mm thick not less than 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms / sqm) laid with LPG torch forced application over roof surface with a side & end overlaps of minimum 100mm with and including a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg /sqm each at top and bottom of the membrane as bonding material and including sealing all joints by thermo fusion complete all as per manufacturers instructions, and as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.5 kg per sq m including cleaning surfaces over water proofing membrane complete all as specified and directed

S&F GI water tubing 40mm bore, medium grade ISI marked including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls and for spout in sunken treatment or laid on floors complete all as specified and directed.

M&L PCC (1:5:10) type E2 (using 40mm graded stone aggregate) as in filling in sunken floors,complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 ( using 20mm graded stone aggreagate) as in sunken floors finished surface even and fair without using extra cement and using water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid seperately

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc., and precast concrete articles and removing rubbish off the premises complete all as specified and directed.

M&L Brickwork with using old size flyash bricks straight or curved on plan exc 6m mean radius, built in cement morter 1:6 complete all as specified and directed.

M&L Brickwork with using old size flyash bricks straight or curved on plan any radius, in half brick thick walls built in cement morter 1:4 complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for refixing and refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) or removal from site of the complete all as specified and directed

All as per Item No.47 above but 15 mm bore

Refixing of 15 mm bore steel tubing and connections of any grade to walls/ ceilings/ laying in new / old position in floors,etc complete all as directed.

All as per Item No.49 above but 20 mm bore

S&F GI water tubing 15mm bore, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls or laid in floors, trenches including testing complete all as specified and directed .

All as per Item No.51 above but 20 mm bore

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washingdown with water to remove dust ,etc complete all as specified and directed.

M&L non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x250x6 to 7mm / 450x350x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including backing coat of 10mm thick CM(1:4) complete all as specified and directed.

M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigments and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L 40 mm thick PCC (1:2:4) type B-1 ( using 20mm graded stone aggreagate) as in flooring finished surface even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path, plinth protection or hardstanding finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path, hardstanding finishing surface even and fair without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces ofl brick / concrete surfaces, finishing even and fair without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:6 on fair faces ofl brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer and including 1 mm thick wall care putty complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls / columns / RCC Chajja / Fascia and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) of approved colours over a coat of primer as per manufacturers instructions complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators and fixed partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window shutters,sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including aluminium anodised fittings such as locking arrangements,etc complete all as specified and directed. Note : Glass or stainless steel wire cloth shall be measured and paid separately.

S & F Powder coated aluminium anodised window and ventilator shutters,fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, (minimum thickness of powder coating 50 micron) complete all as specified and as directed. Note : Glass or stainless steel wire cloth shall be measured and paid separately.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, pin head of side hung type,without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, and including aluminium anodised fittings such as peg stay 150 mm long (01 No) in shelton shutter, stainless steel but hinge type B-21 100mm long (2 Nos) friction hinges 300mm (01 pair) in glazed shutter suitable handle 1 no and 100 mm powder coated aluminium tower bolt (02 nos) with aluminium flat and screws , complete all as specified and directed. Note : Glass or stainless steel wire cloth shall be measured and paid separately.

S & F Powder coated Anodised aluminium decogrill with apperture of size 60 x 45mm securing with suitable aluminium channel to frame complete all as specified and directed.

S&F 4.8 mm thick plain sheet glass ordinary quality fixed in aluminium window and glazing with oil putty in squares exc 0.5 sqm in each pane including necessary fixing arrangement complete all as specified and directed.

S&F 4.8 mm thick plain sheet glass ordinary quality frosted one side fixed in aluminium window and glazing with oil putty in squares exc 0.5 sqm in each pane including necessary fixing arrangement complete all as specified and directed.

S&F in repairs White vitreous china squatting pan "Orissa pattern" of size 580 mm x 440 mm with integral foot rests and "P" or "S" trap and including provision of cement concrete bedding complete all as specified and directed.

S&F in repairs 10 litres capacity, PVC valveless syphonic action type flusing cistern low level, white, with inlet, ball valve, float and handle complete all as specified and directed.

S & F in repairs PVC connection of 15 mm dia and 600mm long with PTMT nuts and washers,etc complete all as specified and directed.

S&F in repairs 100 mm PTMT grating doom (minimun weight 25Gms) including jointing with solvent, complete all as specified and directed.

S&F in repairs angular stop cock concealed type of 15mm dia cast copper alloy chromium plated screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions fancy type chromium type complete all as specified and directed

S&F in repairs Brass chromium plated shower rose of size 125mm size with swivel joint fixing to GI pipe of 15mm dia complete all as specified and directed

S&F in repairs 15mm dia Bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltr capacity including cover and provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and directed

Disconnecting existing tanks of capacity exc 500 & n exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position. (cleaning, repairs, etc. measured seperately) complete all as specified and directed.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & High density plastic bal screwed for iron pipe & fixed. (min weights 20mm - 210 gms) complete all as specified and directed

S&F PVC floor trap 75mm plane with grating including jointing with solvent cement complete all as specified and directed

M & L in repairs 100 mm Cast iron floor trap with grating including jointing with solvent cement jointed to waste pipe complete all as specified.

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwd both ends for iron pipe complete all as specified.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair plate rack of size 24 x 30 x 10 inch of Cat no. P-330 of Prayag make or eqivalent all as specified and directed.

S&F in repairs Vitreous China wash hand basin white, flat back of size 550X400mm,bowl type,with brackets complete all as specified and directed

S & F in repairs 15mm dia pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts. Screwed for iron pipe complete all as specified and directed.

S&F as in repairs LDPE PVC pipe 50mm dia pressure rating 6kgf/cm2 as in waste pipe to wash hand basin/kitchen sink/urinal all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 75mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 110 mm bore PVC (SWR) bend of any radius complete all as specified and directed

S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bend with access door complete all as specified and directed

S&F 75 mm bore PVC (SWR) bend with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, steps, aprons etc complete all as specified and directed

S&F Granite slab tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing such as steps, platform, counter and other similar work and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed

M&L machine cut, kota stone slab flooring 18 to 20mm thick in flooring over and including 20mm think cement screed in CM 1:4 laid and jointed with grey cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut, kota stone slab flooring 20 to 25mm thick over 10mm think rendering in CM 1:6 on wall surface / skirting jointed with grey cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed

S&F in repairs 25mm stainless steel curtain rods all as specified and directed

S&F in repairs stainless steel decorative brackets for curtain rails all as specified and directed

M&L preparing old decorated plastered surfaces including brooming down or steel wire brushing, scrapping down moulds, mass and effloroscent salts and greasy spots and applying two coats of white wash on walls complete all as specified and directed

All as per SL item no 113 above but on ceiling

M&L complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer including 1mm thick wall care putty on wall complete all as specified and directed

M&L complete removal of existing treatment on wall, chajjas & cantilever portion over 10cm width or girth of external surfaces and making good the undulated surfaces by filling with putty including rubbing, scrapping & grinding making the wall surface smooth and including applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) of approved colour over a coat of primer as per manufacturers instructions complete all as specified and directed.

M&L dismantling of RCC jallies of any thickness and disposal of unserviceable materials, debris and rubbish outside the MD land complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and directed

S&F in repairs CP tubular rail, 20mm dia 600 mm long, brass chromium plated and fixed all as specified and directed

S&F Rolled mild steel Joist, channel, angle or tee sections fixed independently, with connecting plates, etc. confirming to Gde FE-410W (Gde E-250) quality 'A' all as specified and directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

M&L Makrana white Marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of as recommended all as specified and required.

Taking down carefully copper / aluminium point wiring surface/concealed [light, fan, socket, ceiling or power] complete including fittings, switches, ceiling roses, pendents, regulators, sockets, holders stair case light etc., and making good the disturbed surfaces complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (Nominal area) PVC insulated Unsheathed cable FRLS grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia concealed PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories and including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 1.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one light /Fan / bell point / 5amp socket controlled by one switch complete all as specified and directed. Note : Cutting chases are deemed to be included in the quoted rate.

All as per Item No.124 above but one 5 Amps socket pointt controlled by one switch on the same board.

All as per item no 124 above but of stair case light point controlled by 02 nos of 2way switches of stair case wiring

M&L Point wiring concealed with 2.5 Sqmm (Nominal area) PVC insulated sheathed cable FRLS grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia concealed PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories and including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 2.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one 15 Amps power socket complete all as specified and directed. Note : Cutting chases are deemed to be included in the quoted rate.

Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status all as specified and directed

M&L sub main wiring with two runs of 4 sq. mm PVC insulated unsheathed multistranded copper conductor cable FRLS grade 1100 volt and one run of 4 Sq.mm multistranded copper conductor cable FRLS grade 1100 volt drawn through and including concealed PVC rigid conduit heavy grade 25 mm dia complete all as specified ad directed. Note: Three runs of 4 Sq.mm cable and 01 run of PVC conduit will be measured as one unit and Cutting chases are deemed to be included in the quoted rate.

S & F switch paino flush type single pole one way, 5/6 Amps, 230 Volts,50Hz complete all as specified and directed

S & F switch paino flush type single pole two way, 5/6 Amps, 230 Volts,50Hz complete all as specified and directed

S & F Switch socket outlet, 3 pin, 5Amps, 240V,50 Hz, flush type, multipurpose, complete all as specified and directed

S & F Switch socket combination with, 2 in 1, 3 pin, 5/15 Amps, 240V, 50 Hz, flush type, multipurpose, complete all as specified and directed

S&F Ceiling rose surface bakelite 65x50mm 2/3 terminals, 230 volts,50Hz, complete all as specified and directed

S&F Stepped type, electronic type fan regulator, AC, 240 Volts, 300W,50Hz, complete all as specified and directed.

S&F bell push, AC, 5A, 230 Volts, complete all as specified and directed.

S&F Ding dong bell single pole,230 Volts, 50Hz, complete all as specified and directed

Supply and fixing in replacement 10 Watt LED Bulk head fitting Environement friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge - lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make : (i) BAJAJ BIBWP10WLED (product code 112334) (ii) Philips Cat part No. WT202WLED6SCWPSUSIPC (iii) Havells Cat Part No. HEXAFT10WLED857SSYMBOPC as approved

S&F 20 W tube light fitting with lamp, Endura linear LED wall and surface mounted LED batten with THD<20% polycarbonate housing & integrated driver for efficient heat dissipation with complete fitting.

S&F 9W tube light fitting with lamp, endura linear LED wall mounted LED batten with polycarbonate housing & integrated driver for efficent heat dissipation with complete fitting.

S&F in replacement of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection having GI bracket of 1.5m length and 32mm dia with anchor, nut, bolt clamp and impact resistance of IK07 complete all as specified and directed. Make: Philips/Havells/surya roshini/ wipro/ Bajaj/ Goldmedal Electrical pvt ltd

S&F of exhaust fans, 300mm deep 1400 rpm, heavy duty, AC single phase, 230 volts including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed. Make: Havells/ Khaitan/ Almonard/ Bajaj/ Crompton Greaves

S&F of ceiling fan white/ivory in coour of 1200mm sweep with multistranded copper conductor 3 core flexible wire of suitable size from ceiling rose with all fittings as per site requirement complete all as specified and directed. Make: Havells/ Bajaj/Khaitan/Crompton Greaves/Usha

S&F of non metallic ventilating fans, 250mm sweep 900 rpm AC single phase, 230 volts including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed Make: Havells/ Khaitan/ Almonard/ Bajaj/ Crompton Greaves

M&L painting of ceiling fans complete, insitu with synthetic enamel paint by spraying including fitting cavities with filler, one coat after cleaning all dust etc all as specified and directed

Taking down defective ceiling fan from its position and refixing the same after repairs complete all as specified and diected

Supply and fix in repair ceiling fan capacitor/ condensors 2.5 mfd of approved make complete all as specified and directed Make: NICCO/Havells/Universal

Supply and fix in replacement of new ball bearing 6201/6202/6203 including metal filling, machining if required, complete all as specified and directed Make: SFC/NBC

Supply and fix in replacement of fan clamp with nut and bolt and rubber bush suitable for ceiling fan of any sweep and make, complete all as specified and directed

M & L Rewinding of ceiling fan motor of type 1200 mm sweep& any make, with super enamelled copper wire of appropriate guage including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnising with golden colour varnish, greasing the bearings, replacement of missing/worn out nuts, bolts & washers, split pins etc. complete all as specified and directed

Taking down carefully old unserviceable MCB DBs with MCBs any type by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed

S&F MCB DB 08 way SPN with 200 A rated bus bar, 240 volts, double door complete all as specified and directed

S&F MCB DB 04 way TPN with 200 A rated bus bar, 415 volts, double door complete all as specified and directed

S&F MCB 6 to 32 Amps, 'C' series, 240 Volts complete all as specified and directed

S&F 40 Amps SPN C Series MCB 240 Volts complete all as specified and as directed

S&F in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W all as specified and directed. Make: Bajaj/Havells/Philips

S&F in replacement angle holder for LED bulb of any type complete all as specified and directed

S&F MCB TPN 63 amps 415 Volts 50 Hz complete all as specified and directed

M&L for cutting openings, through brick/stone walls built in cement mortar for fixing exhaust fans of 300/250mm sweep including making good in cement mortar 1:4 to match with existing wall complete all as specified and directed

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

RCB CONSTRUCTION

ANIL KUMAR BISWAL

M/S SANTOSH SATAPATHY

ANTARYAMI PANDA AND COMPANY

RANA ENTERPRISES

M/S JAGANNATH SASMAL