Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.1 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹60.8 L+₹24,365 (0.40%)Rejected-Finance C O MR M K BHOWMIK NEAR TAPAN VARIETIES JOYNAGAR 06 AGARTALA TRIPURA W 799001 | WEST TRIPURA | TRIPURA | 799001 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹63.3 L+₹2.7 L (4.54%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹64.2 L+₹3.7 L (6.08%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | Rejected-Technical BHATI ABHOYNAGAR WEST VIVEKANANDA CLUB ROAD NEAR HOUSE OF DOCTOR GOURISHANKAR CHAKRABORTY P O AGARTALA TRIPURA WEST PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | - | Rejected-Technical Not enlisted in appropriate category |
Tender Value
₹55.1 L
EMD Value
₹1.1 L
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL N K CHAUDHARY
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPL REPAIR AND ADDITION ALTERATION OF ROAD AT MIL STN AGARTALA
2022_MES_530804_2
8669/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
AGARTALA
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
AGE (I) AGARTALA
₹1.1 L
28 Dec 2022
10 Sept 2022
10 Oct 2022
10 Sept 2022
3 Oct 2022
19 Sept 2022
Amount
Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and as directed.
Excavating over areas, n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Material and labour for 50mm thick Moorum/Red bajri spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.
Material and labour for solids forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and as directed.
Material and labour for 150mm thick soling (or sub base) with broken boulders or quarried stone of size 50 to 100mm, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.
Material and labour for continuous brick edging using old size brick, sub-class ‘B’ (locally available best quality), with width equal to the width of the brick, laid dry on end vertically including necessary earthwork complete all as specified and as directed.
Material and labour for repairs to potholes of depth exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10Sqm (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10 sqm (using paving bitumen VG-30), blinded with 0.09 cum of stone chippings, 6.30 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with smooth wheeled power roller 8 to 12 tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and as directed.
Material and labour for 150 mm thick (compacted thickness) water bound macadam (WBM) (in two layers of 75mm thick each layer) with coarse aggregates of grading 2 (63 to 40 mm size) using granite, trap or basalt stone, spread, rolled with smooth wheeled power roller 8 to 12 tonne and consolidated to required gradient and camber complete all as specified and as directed.
Material and labour for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 10 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed.
Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(e) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber with power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed. Note: (i) The Actul binder content shall be as per optimum content based on approved job mix formula with minimum content of 5.5% by weight of total mix. (ii) Design mix to be approved by the GE/ AGE(I).
Material and labour for painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10cm wide by applying 2.5mm thick thermoplastic road marking paint of specified shade/ colour either continuous or broken lines to the required width and length over the existing painted surface/ new bituminous surface with solvent based thermoplastic road marking paint using semi-automatic thermoplastic paint applicator machine driven by experienced operator on road including all materials, labour, T&P and cleaning dirt, seals, oil, grease and foreign materials etc of road surface complete all as specified and as directed. Note:- Thermoplastic road marking paint shall be apllied as per manufacturer's instructions alongwith MORTH technology and speciality.
Supply and fixing of road stud of size 100 x 110 x 20mm with 2 way reflective reflectors, made of ABS material, dynamically designed having high impact strength complete all as specified and as directed.
Supply and fixing of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 50 mm dia medium grade mild steel pipe of 600 mm height duly powder coated and thermo-plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 type B1 of size (150x150x300mm) complete all as specified and directed
Supply and fixing of convex mirror made of PC material provided with 1.20M long, 50mm dia medium grade MS pipe post, duly powder coated as per site requirement and should have clear and definite mirror image having 130 degree of viewing angle and unbreakable and stonger than glass of size 1000mm dia including embedding in PCC 1:2:4 type B1 of size (300x300x300mm) complete all as specified and as directed.
SHRI SUBRATA GUHA
SHRI CHANDAN CHANDA
M/s Amrit Gope
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .