85820SPECIAL REPAIRS EXISTING ROAD WITH ROAD FURNITURE, PATHWAY AND HARD STANDING / INTERLOCKING TILES AT MINTSD UNDER GE (SOUTH) PUNE.

Amount

M&L for repairs to pot holes of any depth and not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer(VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous semidense concrete (design mix), 25 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed

M&L for Premix bituminous macadam (consolidated thickness 75 mm) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumenous primer using paving bitumen 80/100 (VG-10 grade ) @ 2.5 kg per 10 sqm on black top surface and providing and laying bituminous premixed semi dense asphaltic concrete (design mix ) 40 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix laid with mechanical paver rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and as directed.Note : Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.

M&L for preparation of black top surfaces of road including cleaning of road surfaces free from dust and moisture and applying 2 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow including putting glass beads of standard size by drop method complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out side the MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Demilition of brick / stone masonry built in cement mortar complete all as directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for machine pressed precast cement concrete interlocking reflective type paver block, any shape and size as approved , 60 mm thick, conforming to IS 15658-2006, M-35 grade, glossy finish as in floor/ pavement laid over 25 mm thick stone dust cushioning, laid dry to the profile over subbase / hardcore filling complete all as directed by Engineer-in-Charge.

M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in copings, edging etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work / concrete surfaces finished fair & even complete all as specified and as directed.

R K Enterprises