Renovation of KS 70 at CRI, ACTREC

Amount

Providing and fixing of Wooden pallet boxes made out of 8mm plywood packing material and 18 mm thick packing wood. The should also be a layer of 80gsm plastic and bubble wrap protection layer in between the layers to protect from dust. the size of the complete box will of following size

15 mm cement plaster of mix for wall with ready mix plaster wherever required as per the instructions of Engineer incharge

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned First quality to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproof putty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors,aluminium window frame & glass etc as to the entire satisfaction of engineer in charge :With Luster Paint two coats of primer and two coats of paint. ( Rate inclusive of scafflolding, labour charges, ladder etc.)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

Curtains aluminum bendable track channel. This it be erected as per site condition. The channel will be track system with SS clips running inside. The channel should be capable to hold higher hight curtains. The channel shall be mounted on the ceiling at every 2fts. Grooves of track should be matching with the clip and should be pre approved from EIC.

Providing & fixing Curtain cloth of 300 GSM which can black out the rays of light with mechanisms of erection to be pre-approved before erection. The rate is inclusive of all accessories required for fixing the same.

Providing and fixing Ist quality glazed vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Sharing Workstation - Providing & Supplying at site ,Workstation comprising of modular 1200mm height,60mm thickness partition system with powder coated Aluminium framing with powder coated aluminium caping. . Rate to include Table , 25mm thick Postformed Top made out of Calibrated plywood (IS : 710) BWP finished with P/F 0.6mm laminate with edge binding, wire management, Raceway- Double raceway Soft board+White board combination.In workstation table One side of table understructure 50 X 50 full frame metal structure consider with one side metal modesty (600 x450ht) . Provision for necessary wire management as directed. Complete with All necessary hardware & Fixture.Note : All Furniture to Be Made Out of Calibrated plywood (IS : 710) BWP , All Internal & External Surfaces of Plywood Finished with Laminate Complete, as per detailed Drawing & Instructions Engineer in charge with 1 year warranty. Rate to include wire manager system of approved quality. SIZE: 900 x 600 x 750

Revolving type chair with wheels: SEAT/BACK ASSEMBLY :- The seat & backis made up of 1.2±0.1 cm thk. Hot pressed plywood measured as per QA method described in QCP-OLTA-PL14-18: upholstered with synthetic leather over moduled High Resilience Polyurethane foam. • High Back Size : 51.8 cm (W) X 75.2cm (H) • Seat Size : 49.0 cm (W) x 48.8 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM :- The HR Polyurethane foam is moduled with density =55+/-2 kg/m³ and hardness load 16 ± 2 kgf as IS:7888 for 25% compression. ARMRESTS :- The adjustable armrest is designed with the following features • UP- Down Adjustment- 8 steps (8.0 ± 0.5cm range ) • Height adjustable armrest structure which is chrome plated and fitted with an armrest top • Fixed armrests top is PU moulded over metal insert. BACK HEIGHT ADJUSTIBALITY : - Back can be adjusted in 5 positions by manually .Stroke of height adjustable spine is 7cm. Back height adjustability is applicable for High back & Mid Back chairs . PNEUMATIC HEIGHT ADJUSTMENT :- The pneumatic height. adjustment has an adjustment stroke of 10.0 ± 0.3 cm .

Visitors chairs width 61.4cm * depth 64.5cm*height 89.5cm * Seat Height 46.5cm

Medium ht storage - Providing & Supplying at site, Med ht Storage Unit 18 mm thick top, all sides, shelf, bottom made out of Calibrated plywood (IS : 710) BWP with P/F 0.6mm laminate, other edges finished with 2.0 mm thick PVC edgeband for exposed edges & 0.8 mm thick for non exposed edges t.Complete as per Architects detailed Note :All Furniture to Be Made Out of Calibrated plywood (IS : 710) BWP, All Internal & External Surfaces of Plywood Finished with Laminate . All Hardware Complete, as per detailed Drawing & Instructions directed by Engineer in charge. Including loading, unloading,transportation, installation., With 1 year warranty. SIZE : 900 x 450 x900mm

pedestrian storage - Providing & Supplying at site, pedestrian Unit 18 mm thick top, all sides, shelf, bottom made out of Calibrated plywood (IS : 710) BWP with P/F 0.6mm laminate, other edges finished with 2.0 mm thick PVC edgeband for exposed edges & 0.8 mm thick for non exposed edges t.Complete as per Architects detailed Note :All Furniture to Be Made Out of Calibrated plywood (IS : 710) BWP, All Internal & External Surfaces of Plywood Finished with Laminate . All Hardware Complete, as per detailed Drawing & Instructions directed by Engineer in charge. Including loading, unloading,transportation, installation., With 1 year warranty. SIZE : 600 x 600 x900mm.storage will be on wheels

Providing & Fixing decorative laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thinck laminate

Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters along with handles, hinges all accessories. Marine plywood conforming to IS: 710 and in all complete as per instructions of EIC.

4mm Think pvc vinyl flooring.

Tables : wooden tables with wooden frames of 75x75 for lengths and 50*75 for frame works and 35mm shutter on top with 1.0 mm laminate with edge bending. Wooden surfaces is to polished with melamine finish. Size od the table is as follows

1.2 x 0.75 (laminated top)

1.5 x 0.9 (laminated Top)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

Gas piping works

Supply, Installation, Testing, Commissioing of Copper as per EN 10216-5 / ISO 9626 Gas distribution piping larger sizes in ready made built up trenches as per applicable standard, open execution on internal / external walls, in vertical shafts, above false ceilings as also inside removable trunking, in walls by chasing cutting compelete with factory made fittings such as tee/ elbow/ crossover/ wall sleeves etc., complete with vertical & horizontal supports and termination at both ends, colour coded painting etc.

15 mm ID x 0.9 mm thick

Supply, Installation, Testing, and Commissioing of SS isolation valve ISO 17292 with all necessary hardware, support etc as instructed and as directed by EIC

SITC of CONTROL BOX WITH PRESSURE GAUGE, TOGGLE VALVE, AND PRESSURE REGULATOR FOR AIR and CO2 gases with all necessary hardware, supports etc as per instructed and as directed by EIC. The count will be individual

2 jumbo cylinder manifold piping with tailpipes, cylinder chains piping line with brass connectors with manual value change over between left and right bank. All materials required as per manifold is to be considered. One cylinder on each side of manifold.

Electrical works

SITC of Primary point wiring for light point/ fan point/ exhaust fan point/ call bell point with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch , modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

SITC Secondary point wiring light to light looping with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit Heavy(HMS) as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire from main distribution board to power point circuits and lighting switchboard.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS rate is for one circuit per meter ( i.e 2 X 4 sq. mm + 1 X 4 sq. mm earth wire)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire FOR POWER POINTS rate is for one circuit per meter ( i.e 2 X 6 sq. mm + 1 X 6 sq. mm earth wire)

SITC of 4 x 4 sq. mm copper conductor cable armoured including glanding lugging and all fixing accessories

SITC of 4 x 6 sq. mm copper conductor cable armoured including glanding lugging and all fixing accessories

Lighting , LED , Strip lights

Supply ,Installation,Testing & Commisioning of LED shaped 17 Watt / 18 watt or equivalent Premium Range Downlighter / surface having pressure die-cast aluminimum housing / CRCA with white front bottom frame suitable to following features. - Luminaires shall be surface mounted , -In built electronic LED pre wired driver, -Luminaire shall be with special translucent -High diffuser>85%, -Minimum System Lumen output 1000 lumens -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Polycarbonate Cover, -CRI>80,THD<10% -suitable Heat sink for heat desipation, -Free of maintenance and reliable. -High Efficacy, -Provide Uniform low glare lighting non yellowing, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature as approved by EIC ES

SITC of LED strip / rope lights 10watt to 15watt per meter, colour temp as directed by EIC ES

LED strip light drivers 6A to 10A as directed by EIS ES

SITC of alluminium profile housing for LED strip lights as directed by EIC ES

SITC of LED lights ceiling Hanging curved pendent decorative light metal enclosure light 1200mm x 100mm all the fixing accessories from the ceiling like wire rope , hook , etc in the scope of agency. Sample to be approved from EIC ES

SITC of Spot light led 6w to 8 watt recess or surface COP type light

Power sockets

Supplying and fixing following size/ modules, PVC / GI box alongwith modular base & cover plate for modular switches in recess / surface etc. as required. • All the power socket tagging to be provided , PVC tags to be provided. civil work required for conceled installation of power sockets , electrical conduicts etc. is in the scope of agency including complete finishing and final painting • All the power sockets inside and power panel inside wiring ferruling to be done as instructed by EIC ES

3 Module

6 Module

8 / 9 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

Supplying and fixing following ratings 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles including metal enclosure box , earthing and fixing accessories with connections,Testing and commissioning etc. as required. As per technical specifications in tender. for concealed or surface installed as approved by EIC ES

Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying and erecting 6 to 32A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

SITC of DP Enclosure box metal type for fixing the MCB

SITC of TP Enclosure box metal type for fixing the MCB

Supply , laying and termination of 3core X 2.5 sq. mm flexible copper wire FRLS PVC in casing capping , PVC conduit pipe or recess For wiring. Excluding cost of casing caping, PVC conduit pipe.

Removing of all electrical accessories like switch sockets , lightings, fire alarm devices ( refixing ) IT devices ( refixing ) caising cappings , conduicts etc. Old wiring to be rerouted as per instruction of EIC ES

SITC of 55" LED 4K UHD smart LED TV with VGA input , 2HDMI port with Wallmount Stand , with remote and other accessories as per site installation and as directed by OIC-EIC Resolution: 4K Ultra HD (3840x2160) | Refresh Rate: 60 hertz Connectivity: Wi-Fi (Built-in) | 3 HDMI portse | 1 USB ports to connect hard drives and other USB devices | eARC | Bluetooth 5.0 | Optical | Ethernet Sound: 20 Watts Output | 2.0 Ch Speaker | AI Sound (Virtual Surround 5.1 up-mix) | Auto Volume Levelling | Bluetooth Surround Ready Smart TV Features: AI ThinQ & WebOS 22 with User Profiles α5 Gen5 AI Processor 4K | Display: 4K Ultra HD LED Display | 4K Upscaler | AI Brightness Control

DATA and Telephone

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required. For telephone

Supply,Fixing, Testing and Commissioning of Information Outlet for Cat-6 UTP cable quader front plate with Back box and all accessories as required. RJ 45

Supply,Fixing, Testing and Commissioning of Telephone Outlet front plate with Back box and all accessories as required.

Supply ,Installation (rack dressing)Testing & Commissioning of 1 meter length, UTP Patch cord of Cat 6 type having the compliance/certifications for ISO 9001:2015 & ROHS

Supply ,Installation, Testing & Commissioning of 3 meter length, UTP Patch cord of Cat 6 type, having the compliance/certifications for ISO 9001:2015 & ROHS

Earthing

Earthing Busbar Box with 25 x 6 mm tinned cu strip 500 mm long on suitable insulator. Strip shall be provided with 8mm holes at every 75 mm with nutbolts & washers.

SITC of Tinned copper earth plate electrode 600 x 600 x 3.15 mm earth station, 2.5 mtr below ground level as per drawing complete with all required materials like Cole, charcoal, salt, brass nut bolts & washers, watering arrangements, GI pipe (B class), concrete chamber, heavy duty cast iron cover plate & excavation in all types of soil in ground refilling & removal excess earth within a radius of 500 mtr. Etc. (2 Nos, of neutral earthing of T/F, 2 Nos. for T/f body earthing & 2 Nos. for panel earthing)Note:1.The chamber cover & plate shall be of heavy-duty hinged type & it shall weigh approx. 65 to 75 Kgs. For 450 x 450 mm size & shall be got approved by dept. (6 mm chequred plate with 40 x 40 x 6 mm angle iron frame)2.Plastering shall be done both inside & out side.3.The measurement of resistance of earth station & resistance of complete scheme of earthing layout shall be measured, recorded & got approved by Engg-in-charge. (Composite)

25mm X 3mm thk Cu. Strip with Heat shrink PVC sleeve for UPS and electronics earthing

8 SWG tinned copper bare wire (1 run)(Composite)

HVAC works

Design, Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications and as per SMACNA standard of following sheet thickness complete as required. Hot dipped Galvanised with 120GSM Zinc coatingThe price shall include necessary scaffolding required for working at required height.

Thickness: 0.63 mm Sheet

Thickness: 0.8 mm Sheet

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required

SITC of Extruded aluminium powder coated diffuser/ Grill with volume control damper with all necessary supports as per directed and as instructed by OIC-ES

Supply, installation, testing and commissioning of GI volume control duct damper/Non Return damper 18 guage GI. frame & 20 guage GI blades complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

supply and fix returnable grill aluminum powder-coated with all necessary supports as directed and as instructed by OIC-ES

Demolishing, Dismantling & Shifting of scrap yard of old GI ducting, diffuser, grill, volume control damper, / non-returnable control damper as per instruction and as directed by OIC-ES. Breaking and finishing of civil walls for ducting is inclusive in scope of work

ask enterprises (BID ID -3181082)