REPAIR MAINT OF LT CABLES MCCBS LT PANELS WITH CONNECTED ACCESSORIES AT SECTOR A AND B UNDER GE 865 EWS

Amount

Taking out U/S LT Cable from trench/on wall of any size complete all as specified and directed by Engr in Charge

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 6 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 10 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 16 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5/4 core, 25 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 35 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 50 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 70 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 120 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 3.5 core, 240 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified. Note :- Clamps, GI pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, welles cesspitsm, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depthe in hard/dense soil and getting out , complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified and directed by Engr-in-Chrage

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed by Engr-in-Charge

Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed by Engr-in-Charge.

Supplying & fixing in replacement mild steel galvanized pipe light grade 80 mm nominal bore for passing of cable fixed to poles/walls/laid under floor/roads complete with and including, fittings as required all as specified and directed by Engr-in-Charge

Supplying & fixing in replacement mild steel galvanized pipe light grade 50 mm nominal bore for passing of cable fixed to poles/walls/laid under floor/roads complete with and including, fittings as required all as specified and directed by Engr-in-Charge

Supplying & fixing in replacement mild steel galvanized pipe light grade 40 mm nominal bore for passing of cable fixed to poles/walls/laid under floor/roads complete with and including, fittings as required all as specified and directed by Engr-in-Charge

Material and Labour for painting of LT Panels including cleaning of exposed surface with brush and empry paper including painting with smoke grey paint all as directed any size of LT Panels complete all as specified and directed by Engr in Charge.

M&L for Synthetic Insulating Mat for Electrical Instrument of size 2mx1mx10mm complete all as specified and directed by Engr in Charge.

Supply and fix Indicator lamp LED type(Red,Yellow, green) moulded single piece suitable for LT Panels after taking out the Old U/S indicator lamp.

Dismantling insulators any type and any size complete all as specified and directed.

Supply & fix Pin type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 65 mm dia and 100 mm height. ISI marked

Supply & fix shackle type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 115 mm dia and 100 mm height. ISI marked

Supply and fix PVC Spacers 2/4 way for LT OH Line 1100 Volts grade with necessary screws nuts bolts etc complete all as specified and directed prevent the lines touching each other on heavy wind as a preventive arrangement to the existing system including removing the existing old/out lived spacers.

Prepration of old Steel Surfaces and applying two coat of synthetic enamel white paint to LT Steel tubular /PCC Pole and upto 1 Mtr height from ground level alternative in Yellow and black or white and black strips of 30 CM height each including numbering of Pole No with black paint complete all as specified and directed by Engr in charge.

Dismantling / Taking down of Old broken LT Danger notice Plate of any size complete all as specified and directed.

Supply and fixing Danger notice Plate of 1.6 mm thick mild steel sheet , vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS Clamps , bolts and nuts of approved size, for LT ,20x15 CM size.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and directed.

Supply and fix GI earthing strip of size 25x4 mm on PVC/Porcelain insulators at suitable distance with saddeles and fixing screws for roof/wall conductors and down conductors above ground all joints of GI strip should be brazed properly.

Supply and fixing cable route indicator made out cast iron and embedded LT Cable on the plate of size 80 mm dia 5 mm thick and gouting lugg of suitable size including gouted in PCC foundation of suitable size complete all as directed.

Taking down Old U/S MCCB of any type and any capacity compplete all as specified and directed by Engr in Charge.

Replacement of MCCB 800 Amps current carrying capacity 50 KA, 3 pole AC, 415 Volts three pole with microprocessor based setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 630 Amps current carrying capacity 50 KA, 3 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 800 Amps current carrying capacity 50 KA, 4 pole AC, 415 Volts three pole with microprocessor based setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 630 Amps current carrying capacity 50 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 500 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 400 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 200 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Replacement of MCCB 160 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Supply and fix inreplecement MCCB 100 Amp 4 Pole of rupturing capacity 16 KA complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Supply and fix inreplacement MCCB 125 Amp 4 Pole of rupturing capacity 16 KA complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Supply and fix in replacement MCCB 350 Amp 4 Pole of rupturing capacity 36 KA complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Supply and fix in replacement MCCB 63 Amp 4 Pole of rupturing capacity 25 KA complete all as specified and directed by Engr in Charge. Make: L&T /Havells/Indo Asian/Legrand/HCL.

Taking down Old U/S Change over switch of any size or any capacity complete all as specified and directed by Engr in Charge.

Supply and replacement of ON Load Change over( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 63 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of ON Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 100 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of ON Load Change Change over(Front Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of ON Load Change over ( Front Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 630 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 630 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 800 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 1000 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make-Havells/L&T /Indo Asian.

S&F in repalcement Alluminium Thimbale of size 35/50/70/95 Sq mm complete all as specified and directed by Engr in Charge.

S&F in repalcement Alluminium Thimbale of size 120/150/185/240/400 Sq mm complete all as specified and directed by Engr in Charge.

M/S SUMEET TRADING CORP

HORIZON CONSTRUCTION COMPANY

HILL AND CO.

HIMALAYAN RENEWABLE ENERGY AND CONSTRUCTION FIRM

AMAAN ENGINEERS

ss enterprises

Hitech Erectors Pvt. Ltd.

HONY CAPT RIGZIN SAMPHEL

osho traders